{"title":"Capacitor Kits for Retro Home Consoles","description":"\u003cp\u003eCapacitor kits for retro home consoles, including the NES, Famicom, SNES, GameCube, PlayStation 1, PlayStation 3, original Xbox and Atari systems. Old electrolytic capacitors leak and lose capacity with age, leading to picture faults, audio noise, power problems and corrosion on the board. Each ZedLabz kit is matched to a specific mainboard, power supply or drive board revision, so check your console's model number or board version before ordering.\u003c\/p\u003e","products":[{"product_id":"motherboard-capacitor-kit-for-original-xbox-console-version-1-6-replacement-zedlabz","title":"CPU capacitor kit for Original OG Xbox console motherboard version 1.2 - 1.6 3300uf 6.3V replacement | ZedLabz","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e \r\n\u003cbr\u003e\u003cbr\u003e- Capacitor set for Xbox Original console. \u003cbr\u003e\r\n- Includes 5 Panasonic branded 3300uf 6.3 volt capacitors.\u003cbr\u003e- Can fix power problems for Xbox Original console or leaked capacitors on version 1.6 motherboard. \u003cbr\u003e- Requires internal soldering. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e \r\n\u003cbr\u003e\u003cbr\u003eThis repair kit includes 5 capacitors needed to resolve problems such as the Xbox Original won't power on or leaked capacitors on version 1.6 motherboard. \u003cbr\u003e\u003cbr\u003eThe 5 capacitor kit is compatible with Xbox Original console.\u003cbr\u003e\u003cbr\u003eThese are Panasonic FS series low ESR 3300uf 6.3 Volt capacitors.  \u003cbr\u003e\u003cbr\u003eA reasonable level of soldering ability are required to install the replacement capacitors. The console must be opened to install. \u003cbr\u003e\u003cbr\u003eT10, T15 \u0026amp; T20 Torx screwdriver is required to open the console (Not included).\u003cbr\u003e\u003cbr\u003eSoldering iron, solder \u0026amp; desoldering braid required to fit capacitors, (not included). \u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,HOT,VENT,MAINS,GUIDE\" data-zl-file=\"ZL-TF-ELEC-IC-S00-MULTI-001\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Mains power unit inside – unplug before work; never open it.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fit capacitors the right way round – reversed parts can burst.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":31146284417126,"sku":"700239","price":7.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/cpu-capacitor-kit-for-original-og-xbox-console-motherboard-version-12-16-3300uf-63v-replacement-zedlabzzedlabz-973768.jpg?v=1741479001"},{"product_id":"cpu-capacitor-set-for-original-xbox-console-motherboard-version-1-0-1-1-replacement-zedlabz","title":"CPU capacitor set for Original Xbox OG console motherboard Version 1.0 - 1.1 replacement | ZedLabz","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e \r\n\u003cbr\u003e\u003cbr\u003e- Capacitor set for Xbox Original console. \u003cbr\u003e\r\n- Includes 5 Panasonic branded 1500uf 6.3 volt capacitors.\u003cbr\u003e- Can fix power problems for Xbox Original console or leaked capacitors on version 1.0-1.1 motherboards. \u003cbr\u003e- Requires internal soldering. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e \r\n\u003cbr\u003e\u003cbr\u003eThis repair kit includes 5 capacitors needed to resolve problems such as the Xbox Original won't power on or leaked capacitors on earliest motherboards 1.0-1.1. \u003cbr\u003e\u003cbr\u003eThe 5 capacitor kit is compatible with Xbox Original console.\u003cbr\u003e\u003cbr\u003eThese are Panasonic FR series low ESR 1500uf 6.3 Volt capacitors.  \u003cbr\u003e\u003cbr\u003eA reasonable level of soldering ability are required to install the replacement capacitors. The console must be opened to install. \u003cbr\u003e\u003cbr\u003eT10, T15 \u0026amp; T20 Torx screwdriver is required to open the console (Not included).\u003cbr\u003e\u003cbr\u003eSoldering iron, solder \u0026amp; desoldering braid required to fit capacitors, (not included). \u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,HOT,VENT,MAINS,GUIDE\" data-zl-file=\"ZL-TF-ELEC-IC-S00-MULTI-001\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Mains power unit inside – unplug before work; never open it.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fit capacitors the right way round – reversed parts can burst.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":42574833123580,"sku":"100480","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/products\/cpu-capacitor-set-for-original-xbox-og-console-motherboard-version-10-11-replacement-zedlabz100480zedlabz-876801.jpg?v=1741475709"},{"product_id":"smd-capacitor-kit-for-sony-ps3-ylod-nec-tokin-low-profile-low-esr-4-pack-panasonic","title":"SMD capacitor kit for Sony PS3 YLOD (NEC Tokin) low profile \u0026 low ESR - 4 pack | Panasonic","description":"\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- 470uf Capacitor set of 4 for replacing NEC Tokin\u003cbr\u003e- Compatible with Sony PS3\u003cbr\u003e- Choice of Tantalum or Aluminum capacitor type\u003cbr\u003e- High quality Panasonic branded low ESR caps\u003cbr\u003e- Require skilled soldering to install.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eSolve Yellow light of death issues on your PS3 console by replacing faulty NEC token with 4 low profile and low ESR capacitors.\u003cbr\u003e\u003cbr\u003eWhen it comes to a YLOD fault, lots of research in the gaming community points to the NEC Token capacitors failing, and the solution to this is to replace a NEC Cap with alternative low ESR 470uf caps, these need to be of a certain quality and profile to fit in place of the NEC Token.\u003cbr\u003e\u003cbr\u003eFour of these 470uf capacitors are needed to replace a single NEC token, a PS3 can have a different number of Token, so you please order according to the number of token you will be replacing, or example if you are replacing 4 token, then please order a quantity of 4, you will receive 16 caps.\u003cbr\u003e\u003cbr\u003eWe offer two types of capacitor kit, one has an even lower ESR which is technically preferable, but either type are suitable, please select the ones you require from the drop down box.\u003cbr\u003e\u003cbr\u003e1) Low ESR Panasonic tantalum which are the most commonly used capacitors for this type of repair.\u003cbr\u003e\u003cbr\u003e2) Even lower ESR Panasonic Aluminum polymer - It is preferable to use the lowest ESR when replacing the NEC Token, so we provide these as an option.\u003cbr\u003e\u003cbr\u003eThis repair requires advanced repair and soldering skills, recommended for trained electronics professionals only. \u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,HOT,VENT,MAINS,GUIDE\" data-zl-file=\"ZL-DR-PANASONIC\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Mains power unit inside – unplug before work; never open it.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fit capacitors the right way round – reversed parts can burst.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Panasonic · Seller: Assecure Ltd (ZedLabz), Maldon CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Panasonic","offers":[{"title":"Tantalum Low ESR","offer_id":46584201937148,"sku":"300848","price":7.49,"currency_code":"GBP","in_stock":true},{"title":"Aluminum Lower ESR","offer_id":46584201969916,"sku":"300849","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/hmitnhk3c3o.jpg?v=1794006250"},{"product_id":"capacitor-kit-for-atari-lynx-1-2-ii-repair-replacement-power-sound-dim-screen-zedlabz-copy","title":"Capacitor kit for Atari Jaguar CD | ZedLabz","description":"\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Capacitor replacement set for Atari Jaguar CD addon.\u003cbr\u003e- Major brand through-hole electrolytic capacitors\u003cbr\u003e- Includes capacitors compatible with various board revisions.\u003cbr\u003e- Ideal for restoring power stability and fixing graphics issues.\u003cbr\u003e- Requires soldering skills and basic tools for installation (soldering iron, solder, flux, and desoldering pump recommended).\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eRestore and future-proof your Atari Jaguar CD unit with this high-quality capacitor set, specifically curated using only major brand caps. The included electrolytic capacitors match or exceed the original specifications, and help to resolve common faults caused by old failing capacitors such a power or graphics issues.\u003cbr\u003e\u003cbr\u003eReplacing capacitors requires careful handling and soldering skills. If you’re unfamiliar with soldering techniques, we strongly recommend researching guides or consulting a professional to ensure a successful installation. Incorrect fitting can lead to further damage, so always take your time and work methodically, taking note of capacitor polarity.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCapacitor list:\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eC8    47uf    25v\u003cbr\u003eC10    22uf    25v\u003cbr\u003eC12    22uf    16v\u003cbr\u003eC21    22uf    25v\u003cbr\u003eC23    33uf    10v\u003cbr\u003eC24    33uf    10v\u003cbr\u003eC35    47uf    10v\u003cbr\u003eC36    47uf    10v\u003cbr\u003eC39    47uf    25v\u003cbr\u003eC42    1uf    50v\u003cbr\u003eC47    1uf    50v\u003cbr\u003eC48    4.7uf    50v\u003cbr\u003eC54    4.7uf    50v\u003cbr\u003eC58    1uf    50v\u003cbr\u003eC59    47uf    10v\u003cbr\u003eC73    10uf    25v\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePlease note: This is an unofficial third-party repair kit and is not manufactured by, approved, supported, or endorsed by Atari. \u003cbr\u003e\u003cbr\u003eTools needed to install new capacitors are not included.\u003cbr\u003e\u003cbr\u003eInstallation requires soldering skills, if you're not familiar with soldering techniques, we recommend consulting a professional or referring to reputable guides.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,HOT,VENT,GUIDE\" data-zl-file=\"ZL-TF-ELEC-IC-S00-MULTI-001\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fit capacitors the right way round – reversed parts can burst.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":47157268218108,"sku":"000890","price":6.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/capacitor-kit-for-atari-lynx-1-2-ii-repair-replacement-powersound-dim-screen-zedlabz000726zedlabz-408642.jpg?v=1741474922"},{"product_id":"capacitor-kit-for-atari-jaguar-zedlabz","title":"Capacitor replacement kit for Atari Jaguar mainboard motherboard | ZedLabz","description":"Restore your Atari Jaguar with this comprehensive surface-mount electrolytic capacitor replacement set. \u003cbr\u003e\u003cbr\u003eIdeal for repairing or maintaining ageing consoles, this kit contains the replacement capacitors required for compatible Atari Jaguar console revisions.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eComprehensive capacitor replacement set\u003c\/li\u003e\n\u003cli\u003eCompatible with Atari Jaguar consoles\u003c\/li\u003e\n\u003cli\u003eIncludes replacement capacitors for the main console PCB\u003c\/li\u003e\n\u003cli\u003eSuitable for preventative maintenance or repair\u003c\/li\u003e\n\u003cli\u003eIdeal for restoring ageing consoles\u003c\/li\u003e\n\u003cli\u003eRequires desoldering and soldering skills for installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThis capacitor replacement kit is designed for servicing compatible Atari Jaguar consoles. Over time, original capacitors can deteriorate through age and use, making replacement a common maintenance task during console restoration or repair.\u003cbr\u003e\u003cbr\u003eThe kit includes replacement though hole capacitors covering the main capacitor locations used on compatible Atari Jaguar console revisions, and is assembled using major brand capacitors selected for their quality and reliability.\u003cbr\u003e\u003cbr\u003eInstallation requires the console to be disassembled, followed by the removal of the original capacitors and soldering of the replacements. Experience with both desoldering and soldering electronic components is recommended before attempting installation. Always observe capacitor polarity and component orientation during fitting.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCapacitor List:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eC7 100uF 16V\u003cbr\u003eC8 100uF 16V\u003cbr\u003eC10 10uF 16V\u003cbr\u003eC11 10uF 25V\u003cbr\u003eC14 1uF 50V\u003cbr\u003eC17 1uF 50V\u003cbr\u003eC18 1uF 50V\u003cbr\u003eC21 1uF 50V\u003cbr\u003eC22 10uF 25V\u003cbr\u003eC24 2.2uF 50V\u003cbr\u003eC34 10uF 16V\u003cbr\u003eC39 22uF 16V\u003cbr\u003eC42 10uF 25V\u003cbr\u003eC43 10uF 25V\u003cbr\u003eC45 47uF 16V\u003cbr\u003eC93 10uF 25V (Rev J \/ K only)\u003cbr\u003eC134 330uF 16V\u003cbr\u003eC142 10uF 25V\u003cbr\u003eC150 2200uF 10V\u003cbr\u003eC174 4.7uF 50V\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFurther Information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eInstallation requires the console to be opened. Opening tools, soldering equipment and consumables are not included.\u003cbr\u003e\u003cbr\u003eSuitable tools typically include screwdrivers, a soldering iron, solder, flux and desoldering equipment such as a desoldering pump\u003cbr\u003e\u003cbr\u003eInstallation requires experience with desoldering and soldering electronic components. If you are unfamiliar with these techniques, we recommend consulting a professional or referring to reputable repair guides before attempting installation.\u003cbr\u003e\u003cbr\u003ePlease note: This is an unofficial third-party repair kit and is not manufactured by, licensed by, authorised by or endorsed by Atari.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,HOT,VENT,GUIDE\" data-zl-file=\"ZL-TF-ELEC-IC-S08-001\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fit capacitors the right way round – reversed parts can burst.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":50954439295228,"sku":"000728","price":8.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/capacitor-replacement-kit-for-atari-jaguar-mainboard-motherboard-zedlabzzedlabz-7820344.jpg?v=1786347608"},{"product_id":"capacitor-kit-for-atari-7800-zedlabz","title":"Capacitor replacement kit for Atari 7800 mainboard motherboard | ZedLabz","description":"Restore your Atari 7800 with this capacitor replacement set for the mainboard. \u003cbr\u003e\u003cbr\u003eIdeal for repairing or maintaining ageing consoles, this kit contains the replacement electrolytic capacitors required for the Atari 7800 motherboard.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eCapacitor replacement set for the Atari 7800 mainboard\u003cbr\u003eCompatible with Atari 7800 consoles\u003cbr\u003eIncludes three replacement capacitors for the motherboard\u003cbr\u003eAssembled using major brand capacitors selected for their quality and reliability\u003cbr\u003eSuitable for preventative maintenance or repair\u003cbr\u003eRequires desoldering and soldering skills for installation\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThis capacitor replacement kit is designed for servicing the Atari 7800 mainboard. Over time, original capacitors can deteriorate through age and use, making replacement a common maintenance task during console restoration or repair.\u003cbr\u003e\u003cbr\u003eThe kit includes replacement through hole capacitors for the Atari 7800 motherboard and is assembled using major brand capacitors selected for their quality and reliability.\u003cbr\u003e\u003cbr\u003eInstallation requires the console to be disassembled, followed by the removal of the original capacitors and soldering of the replacements. Experience with desoldering and soldering electronic components is recommended before attempting installation. Always observe capacitor polarity and component orientation during fitting.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCapacitor List:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eC22 220uF 16V\u003cbr\u003eC61 220uF 16V\u003cbr\u003eC62 2200uF 16V\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFurther Information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eInstallation requires the console to be opened. Opening tools, soldering equipment and consumables are not included.\u003cbr\u003e\u003cbr\u003eSuitable tools typically include screwdrivers, a soldering iron, solder, flux and desoldering equipment such as a desoldering pump\u003cbr\u003e\u003cbr\u003eInstallation requires experience with desoldering and soldering electronic components. If you are unfamiliar with these techniques, we recommend consulting a professional or referring to reputable repair guides before attempting installation.\u003cbr\u003e\u003cbr\u003ePlease note: This is an unofficial third-party repair kit and is not manufactured by, licensed by, authorised by or endorsed by Atari.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,HOT,VENT,GUIDE\" data-zl-file=\"ZL-TF-ELEC-IC-S08-001\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fit capacitors the right way round – reversed parts can burst.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":50954617422076,"sku":"000729","price":5.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/capacitor-replacement-kit-for-atari-7800-mainboard-motherboard-zedlabzzedlabz-7819338.jpg?v=1786347608"},{"product_id":"mainbboard-power-capacitor-kit-for-nes-front-loader-nes-001-zedlabz","title":"Capacitor replacement kit for Nintendo NES Front Loader mainboard \u0026 power NES-001 | ZedLabz","description":"Restore your Nintendo Entertainment System with this comprehensive capacitor replacement kit for the Front Loader NES (NES-001).\u003cbr\u003e\u003cbr\u003eDesigned for console repair and preventative maintenance, the kit contains the replacement capacitors required for the main logic board together with a range of compatible power and RF modulator board revisions.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eComprehensive capacitor replacement set for Nintendo Entertainment System Front Loader (NES-001)\u003c\/li\u003e\n\u003cli\u003eIncludes capacitors for the main logic board and compatible power \/ RF modulator boards\u003c\/li\u003e\n\u003cli\u003eAssembled using major brand capacitors selected for their quality and reliability\u003c\/li\u003e\n\u003cli\u003eSuitable for console restoration, repair and preventative maintenance\u003c\/li\u003e\n\u003cli\u003eCovers multiple power board revisions\u003c\/li\u003e\n\u003cli\u003eRequires desoldering and soldering skills for installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThis capacitor replacement kit is designed for servicing Nintendo Entertainment System Front Loader (NES-001) consoles. As consoles age, the original capacitors can deteriorate, making replacement a common maintenance task when restoring or repairing your console.\u003cbr\u003e\u003cbr\u003eThe kit includes replacement capacitors for the main NES logic board together with a selection of capacitors suitable for the most common Alps and Mitsumi power and RF modulator board revisions. It is assembled using major brand capacitors selected for their quality and reliability.\u003cbr\u003e\u003cbr\u003eInstallation requires the console to be disassembled before the original capacitors are removed and the replacements soldered into place. Experience with desoldering and soldering electronic components is recommended before attempting installation. Always observe capacitor polarity and component orientation during fitting.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCapacitor List:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eMain NES Logic Board\u003cbr\u003eC1 100uF 6.3V\u003cbr\u003eC9 2.2uF 50V\u003cbr\u003eC23 1uF 50V\u003cbr\u003e\u003cbr\u003eAlps Modules with BA20 (or similar) Diode Bridge\u003cbr\u003e\u003cbr\u003eAlps - Green PCB with Floating Capacitor\u003cbr\u003eC19 1uF 50V\u003cbr\u003eC30 2200uF 25V\u003cbr\u003eC33 1uF 50V\u003cbr\u003eC34 100uF 6.3V\u003cbr\u003e\u003cbr\u003eAlps - Brown PCB\u003cbr\u003eC1 10uF 35V (25V acceptable)\u003cbr\u003eC21 2200uF 25V\u003cbr\u003eC23 10uF 35V\u003cbr\u003eC25 100uF 10V\u003cbr\u003eC29 1uF 50V\u003cbr\u003e\u003cbr\u003eAlps Modules with 4x Discreet Diode Bridge\u003cbr\u003e\u003cbr\u003eAlps Power \u0026amp; Modulator PCB: FR853\u003cbr\u003eC1 10uF 16V (PAL only)\u003cbr\u003eC21 2200uF 25V\u003cbr\u003eC23 100uF 25V\u003cbr\u003eC25 100uF 10V\u003cbr\u003eC29 1uF 50V\u003cbr\u003eC34 10nF (Reference only - not included)\u003cbr\u003eC35 1uF 50V\u003cbr\u003eC36 10uF 16V\u003cbr\u003e\u003cbr\u003eAlps Power \u0026amp; Modulator PCB: SH-SH5 \/ FS074\u003cbr\u003eC21 2200uF 25V\u003cbr\u003eC23 100uF 25V\u003cbr\u003eC25 100uF 10V\u003cbr\u003eC29 1uF 50V\u003cbr\u003eC36 10uF 16V\u003cbr\u003eC37 1uF 50V\u003cbr\u003e\u003cbr\u003eMitsumi Power \u0026amp; Modulator PCB: TDK-T12V\u003cbr\u003eC2 10uF 16V\u003cbr\u003eC6 10uF 16V\u003cbr\u003eC26 2200uF 25V\u003cbr\u003eC29 100uF 16V\u003cbr\u003eC31 100uF 25V\u003cbr\u003eC32 10uF 16V\u003cbr\u003e\u003cbr\u003eMitsumi Power \u0026amp; Modulator PCB: MTM-8V-0 \/ VIX\u003cbr\u003eC5 10uF 35V (25V acceptable)\u003cbr\u003eC20 2200uF 25V\u003cbr\u003eC21 100uF 16V\u003cbr\u003eC24 100uF 10V\u003cbr\u003e\u003cbr\u003eMitsumi Power \u0026amp; Modulator PCB: TDK-T31V\u003cbr\u003eC6 10uF 16V\u003cbr\u003eC21 2200uF 25V\u003cbr\u003eC22 100uF 16V\u003cbr\u003eC25 100uF 10V\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFurther Information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eInstallation requires the console to be opened. Opening tools, soldering equipment and consumables are not included.\u003cbr\u003e\u003cbr\u003eSuitable tools typically include screwdrivers, a soldering iron, solder, flux and desoldering equipment such as a desoldering pump or desoldering braid.\u003cbr\u003e\u003cbr\u003eInstallation requires experience with desoldering and soldering electronic components. If you are unfamiliar with these techniques, we recommend consulting a professional or referring to reputable repair guides before attempting installation.\u003cbr\u003e\u003cbr\u003ePlease note: This is an unofficial third-party repair kit and is not manufactured by, licensed by, authorised by or endorsed by Nintendo.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,HOT,VENT,GUIDE\" data-zl-file=\"ZL-TF-ELEC-IC-S08-001\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fit capacitors the right way round – reversed parts can burst.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":50955237458172,"sku":"000730","price":6.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/capacitor-replacement-kit-for-nintendo-nes-front-loader-mainboard-power-nes-001-zedlabzzedlabz-8460605.png?v=1786347608"},{"product_id":"mainbboard-capacitor-kit-for-nes-top-loader-nes-001-zedlabz","title":"Capacitor replacement kit for Nintendo NES Top Loader motherboard NES-001 | ZedLabz","description":"Restore your Nintendo Entertainment System Top Loader with this capacitor replacement kit for the NESN-CPU-01 mainboard.\u003cbr\u003e\u003cbr\u003eIdeal for repairing or maintaining ageing consoles, this kit contains the replacement capacitors required for the NES Top Loader motherboard.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eCapacitor replacement set for Nintendo Entertainment System Top Loader (NESN-CPU-01)\u003c\/li\u003e\n\u003cli\u003eCompatible with Nintendo NES Top Loader consoles\u003c\/li\u003e\n\u003cli\u003eIncludes replacement capacitors for the mainboard\u003c\/li\u003e\n\u003cli\u003eAssembled using major brand capacitors selected for their quality and reliability\u003c\/li\u003e\n\u003cli\u003eSuitable for preventative maintenance or repair\u003c\/li\u003e\n\u003cli\u003eRequires desoldering and soldering skills for installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThis capacitor replacement kit is designed for servicing the Nintendo Entertainment System Top Loader (NESN-CPU-01) mainboard. Over time, original capacitors can deteriorate through age and use, making replacement a common maintenance task during console restoration or repair.\u003cbr\u003e\u003cbr\u003eThe kit includes replacement capacitors for the NES Top Loader motherboard and is assembled using major brand capacitors selected for their quality and reliability.\u003cbr\u003e\u003cbr\u003eInstallation requires the console to be disassembled before the original capacitors are removed and the replacements soldered into place. \u003cbr\u003e\u003cbr\u003eExperience with desoldering and soldering electronic components is recommended before attempting installation. Always observe capacitor polarity and component orientation during fitting.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCapacitor List:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eC1 100uF 6.3V\u003cbr\u003eC3 1uF 50V\u003cbr\u003eC11 0.47uF 50V\u003cbr\u003eC13 1500uF 25V\u003cbr\u003eC14 1uF 50V\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFurther Information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eInstallation requires the console to be opened. Opening tools, soldering equipment and consumables are not included.\u003cbr\u003e\u003cbr\u003eSuitable tools typically include screwdrivers, a soldering iron, solder, flux and desoldering equipment such as a desoldering pump or desoldering braid.\u003cbr\u003e\u003cbr\u003eInstallation requires experience with desoldering and soldering electronic components. If you are unfamiliar with these techniques, we recommend consulting a professional or referring to reputable repair guides before attempting installation.\u003cbr\u003e\u003cbr\u003ePlease note: This is an unofficial third-party repair kit and is not manufactured by, licensed by, authorised by or endorsed by Nintendo.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,HOT,VENT,GUIDE\" data-zl-file=\"ZL-TF-ELEC-IC-S08-001\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fit capacitors the right way round – reversed parts can burst.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":50955473355004,"sku":"300047","price":5.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/capacitor-replacement-kit-for-nintendo-nes-top-loader-motherboard-nes-001-zedlabzzedlabz-1360512.png?v=1786347607"},{"product_id":"replacement-capacitor-kit-for-nintendo-gamecube-laser-optical-drive-pcb-zedlabz","title":"Capacitor replacement kit for Nintendo GameCube optical laser disc drive board | ZedLabz","description":"Restore your Nintendo GameCube optical drive with this surface-mount capacitor replacement kit for the laser lens board.\u003cbr\u003e\u003cbr\u003eDesigned for repairing or maintaining ageing optical drives, this kit contains the replacement surface-mount capacitors required for compatible GameCube laser boards.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eSurface-mount capacitor replacement set for Nintendo GameCube optical laser lens board\u003c\/li\u003e\n\u003cli\u003eCompatible with a wide range of Nintendo GameCube console revisions\u003c\/li\u003e\n\u003cli\u003eIncludes replacement surface-mount capacitors for the optical drive board\u003c\/li\u003e\n\u003cli\u003eAssembled using major brand capacitors selected for their quality and reliability\u003c\/li\u003e\n\u003cli\u003eSuitable for preventative maintenance or repair\u003c\/li\u003e\n\u003cli\u003eRequires desoldering and soldering skills for installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThis capacitor replacement kit is designed for servicing compatible Nintendo GameCube optical drive laser boards. Over time, the original surface-mount capacitors can deteriorate through age and use, making replacement a common maintenance task during optical drive restoration or repair.\u003cbr\u003e\u003cbr\u003eThe kit includes replacement surface-mount capacitors for the GameCube laser board and is assembled using major brand capacitors selected for their quality and reliability.\u003cbr\u003e\u003cbr\u003eInstallation requires the console and optical drive to be disassembled before the original surface-mount capacitors are removed and the replacements soldered into place. Experience with desoldering and soldering surface-mount electronic components is recommended before attempting installation. Always observe capacitor polarity and component orientation during fitting.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSupported Versions:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eNTSC\u003cbr\u003eDOL-CPU-01\u003cbr\u003eDOL-CPU-10\u003cbr\u003eC\/DOL-CPU-11\u003cbr\u003eC\/DOL-CPU-20\u003cbr\u003eC\/DOL-CPU-30\u003cbr\u003eC\/DOL-CPU-50\u003cbr\u003eC\/DOL-CPU-60\u003cbr\u003e\u003cbr\u003ePAL\u003cbr\u003eC\/DOL-CPU(P)-01\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFurther Information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eInstallation requires the console and optical drive to be opened. Opening tools, soldering equipment and consumables are not included.\u003cbr\u003e\u003cbr\u003eSuitable tools typically include screwdrivers, a soldering iron with a fine tip, solder, flux and desoldering equipment such as desoldering braid or a hot air rework station.\u003cbr\u003e\u003cbr\u003eInstallation requires experience with desoldering and soldering surface-mount electronic components. If you are unfamiliar with these techniques, we recommend consulting a professional or referring to reputable repair guides before attempting installation.\u003cbr\u003e\u003cbr\u003ePlease note: This is an unofficial third-party repair kit and is not manufactured by, licensed by, authorised by or endorsed by Nintendo.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,HOT,VENT,GUIDE\" data-zl-file=\"ZL-TF-ELEC-IC-S00-001\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fit capacitors the right way round – reversed parts can burst.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":50956071502076,"sku":"900098","price":9.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/capacitor-replacement-kit-for-nintendo-gamecube-optical-laser-disc-drive-board-zedlabzzedlabz-1576871.jpg?v=1786347607"},{"product_id":"capacitor-set-for-nintendo-famicom-mainboard-hvc-001-zedlabz","title":"Capacitor set for Nintendo Famicom mainboard (HVC-001) | ZedLabz","description":"Replacement electrolytic capacitor set for NES Famicom® (HVC-001) logic boards. \u003cbr\u003e\u003cbr\u003eMISSING 1 CAP\u003cbr\u003eHVC-CPU-07\u003cbr\u003eC1    0.47uF    16V (Main PCB)\u003cbr\u003eC1    10uF    16v (Power PCB)\u003cbr\u003eC2    1uF    50V\u003cbr\u003eC19    1uF    50V\u003cbr\u003eC24    47uF    16V\u003cbr\u003eC25    1000uF    6.3V\u003cbr\u003eCONTROLLER 2 - 0.33uF    50V\u003cbr\u003e\u003cbr\u003eHVC-GPU-GPM-02\u003cbr\u003eC1    10uF    50v (16v OK)\u003cbr\u003eC2    1uF    50v\u003cbr\u003eC7    1uF    50v\u003cbr\u003eC8    0.47uF    50v\u003cbr\u003eC21    47uF    16V\u003cbr\u003eC22    1000uF    6.3V\u003cbr\u003eCONTROLLER 2 - 0.33uF    50V\u003cbr\u003e\u003cbr\u003eHVCN-CPU-01 (AV Famicom)\u003cbr\u003eC1    1uF    50v\u003cbr\u003eC4    1uF    50v\u003cbr\u003eC5    220uF    6.3v\u003cbr\u003eC13    1000uF    25v\u003cbr\u003eC14    47uF    6.3v (1uF 50v early revisions)\u003cbr\u003eC15    0.47uF    50v\u003cbr\u003e\u003cbr\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":67820645810428,"sku":"400985","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/capacitor-set-for-nintendo-famicom-mainboard-hvc-001-zedlabzzedlabz-4916160.jpg?v=1792551373"},{"product_id":"capacitor-set-for-ps1-power-board-panasonic-type-122-zedlabz","title":"Capacitor set for PS1 power board (Panasonic Type 122) | ZedLabz","description":"\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Replacement electrolytic capacitor set for PS1 Panasonic Type 122 power boards\u003cbr\u003e- Contains the capacitors listed below\u003cbr\u003e- Soldering required\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eReplacement electrolytic capacitor set for Sony PS1 Panasonic (Type 122) power boards.\u003cbr\u003e\u003cbr\u003eFits power boards 1-468-218-11 (Matsushita \/ Panasonic ETXNY122A1B) and 1-473-380-13 (Matsushita \/ Panasonic ETXNY085A1C).\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCapacitors included:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- C003: 100uF 200V\u003cbr\u003e- C102: 560uF 25V\u003cbr\u003e- C103: 560uF 25V\u003cbr\u003e- C104: 220uF 25V\u003cbr\u003e- C105: 330uF 25V\u003cbr\u003e- C107: 1uF 50V\u003cbr\u003e\u003cbr\u003eCheck your board's part number against the list above before ordering. Fitting means desoldering the old capacitors and soldering in the new ones the correct way round, and the console must be opened to fit them.\u003cbr\u003e\u003cbr\u003eThese are general electronic components supplied for repair use. This is an unofficial product which is not manufactured by, endorsed, sponsored or licensed by Sony Interactive Entertainment.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,HOT,VENT,GUIDE\" data-zl-file=\"\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Capacitors are polarised – fit the correct way round.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":67824305930492,"sku":"400987","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/capacitor-set-for-ps1-power-board-panasonic-type-122-zedlabzzedlabz-3741566.png?v=1792551371"},{"product_id":"capacitor-set-for-ps1-power-board-mitsumi-version-zedlabz","title":"Capacitor set for PS1 power board (Mitsumi version) | ZedLabz","description":"\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Replacement electrolytic capacitor set for PS1 Mitsumi power boards\u003cbr\u003e- Contains the capacitors listed below\u003cbr\u003e- Soldering required\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eReplacement electrolytic capacitor set for Sony PS1 Mitsumi power boards.\u003cbr\u003e\u003cbr\u003eFits power boards 1-473-381-11 and 1-473-381-13 (Mitsumi SR670), and 1-468-218-21 and 1-468-218-22 (Mitsumi SR679).\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCapacitors included:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- C104: 120uF 200V (150uF on some revisions)\u003cbr\u003e- C111: 47uF 35V\u003cbr\u003e- C201: 1000uF 16V\u003cbr\u003e- C202: 470uF 16V\u003cbr\u003e- C203: 2200uF 10V\u003cbr\u003e- C204: 1000uF 6.3V\u003cbr\u003e\u003cbr\u003eCheck your board's part number against the list above before ordering. Fitting means desoldering the old capacitors and soldering in the new ones the correct way round, and the console must be opened to fit them.\u003cbr\u003e\u003cbr\u003eThese are general electronic components supplied for repair use. This is an unofficial product which is not manufactured by, endorsed, sponsored or licensed by Sony Interactive Entertainment.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,HOT,VENT,GUIDE\" data-zl-file=\"\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Capacitors are polarised – fit the correct way round.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":67824306946300,"sku":"400983","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/capacitor-set-for-ps1-power-board-mitsumi-version-zedlabzzedlabz-7774768.jpg?v=1792551372"},{"product_id":"capacitor-set-for-ps1-power-board-panasonic-type-029-version-zedlabz","title":"Capacitor set for PS1 power board (Panasonic Type 029 version) | ZedLabz","description":"\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Replacement electrolytic capacitor set for PS1 Panasonic Type 029 power boards\u003cbr\u003e- Contains the capacitors listed below\u003cbr\u003e- Soldering required\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eReplacement electrolytic capacitor set for Sony PS1 Panasonic (Type 029) power boards.\u003cbr\u003e\u003cbr\u003eFits power board 1-473-380-12 (Panasonic ETXNY029A1C).\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCapacitors included:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- C003: 120uF 200V\u003cbr\u003e- C102: 560uF 25V\u003cbr\u003e- C103: 560uF 25V\u003cbr\u003e- C104: 180uF 25V\u003cbr\u003e- C105: 180uF 35V\u003cbr\u003e- C107: 1uF 50V\u003cbr\u003e\u003cbr\u003eCheck your board's part number against the list above before ordering. Fitting means desoldering the old capacitors and soldering in the new ones the correct way round, and the console must be opened to fit them.\u003cbr\u003e\u003cbr\u003eThese are general electronic components supplied for repair use. This is an unofficial product which is not manufactured by, endorsed, sponsored or licensed by Sony Interactive Entertainment.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,HOT,VENT,GUIDE\" data-zl-file=\"\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Capacitors are polarised – fit the correct way round.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":67824307306748,"sku":"400984","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/capacitor-set-for-ps1-power-board-panasonic-type-029-version-zedlabzzedlabz-4996776.jpg?v=1792551366"},{"product_id":"capacitor-set-for-ps1-power-board-fujitsu-version-zedlabz","title":"Capacitor set for PS1 power board (Fujitsu version) | ZedLabz","description":"\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Replacement electrolytic capacitor set for PS1 Fujitsu power boards\u003cbr\u003e- Contains the capacitors listed below\u003cbr\u003e- Soldering required\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eReplacement electrolytic capacitor set for Sony PS1 Fujitsu power boards.\u003cbr\u003e\u003cbr\u003eFits power board 1-468-158-11 (Fujitsu KS350-1401-H039-05).\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCapacitors included:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- C2: 100uF 200V\u003cbr\u003e- C9: 3300uF 10V\u003cbr\u003e- C8: 2200uF 16V\u003cbr\u003e- C10: 330uF 16V\u003cbr\u003e- C11: 330uF 16V\u003cbr\u003e- C12: 1uF 50V\u003cbr\u003e\u003cbr\u003eCheck your board's part number against the list above before ordering. Fitting means desoldering the old capacitors and soldering in the new ones the correct way round, and the console must be opened to fit them.\u003cbr\u003e\u003cbr\u003eThese are general electronic components supplied for repair use. This is an unofficial product which is not manufactured by, endorsed, sponsored or licensed by Sony Interactive Entertainment.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,HOT,VENT,GUIDE\" data-zl-file=\"\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Capacitors are polarised – fit the correct way round.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":67824307536124,"sku":"400986","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/capacitor-set-for-ps1-power-board-fujitsu-version-zedlabzzedlabz-4517428.jpg?v=1792551366"},{"product_id":"capacitor-set-for-mainboard-snes-jr-zedlabz","title":"Capacitor set for SNES Jr mainboard (SNN-CPU-01) | ZedLabz","description":"\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Replacement electrolytic capacitor set for the SNES Jr mainboard (SNN-CPU-01)\u003cbr\u003e- Contains the capacitors listed below\u003cbr\u003e- Soldering required\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eReplacement electrolytic capacitor set for the SNES Jr (SNES Mini) SNN-CPU-01 logic board.\u003cbr\u003e\u003cbr\u003eFits the SNN-CPU-01 mainboard used in the SNES Jr, also known as the SNES Mini.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCapacitors included:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- C9: 2.2uF 50V\u003cbr\u003e- C14: 33uF 25V\u003cbr\u003e- C15: 47uF 16V\u003cbr\u003e- C16: 33uF 25V\u003cbr\u003e- C17: 33uF 25V\u003cbr\u003e- C58: 10uF 16V\u003cbr\u003e- C59: 10uF 16V\u003cbr\u003e- C60: 220uF 6.3V\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eAlso listed:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- 1000uF 25V - found in Super Famicom hardware\u003cbr\u003e- 470uF 6.3V - to add across the ground \/ output terminals of the voltage regulator\u003cbr\u003eCheck your board's part number against the list above before ordering. Fitting means desoldering the old capacitors and soldering in the new ones the correct way round, and the console must be opened to fit them.\u003cbr\u003e\u003cbr\u003eThese are general electronic components supplied for repair use. This is an unofficial product which is not manufactured by, endorsed, sponsored or licensed by Nintendo.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,HOT,VENT,GUIDE\" data-zl-file=\"\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Capacitors are polarised – fit the correct way round.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":67824307929340,"sku":"400988","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/capacitor-set-for-mainboard-snes-jr-zedlabzzedlabz-5661972.jpg?v=1792551366"},{"product_id":"capacitor-set-for-ps1-power-board-nichicon-type-797ma-zedlabz","title":"Capacitor set for PS1 power board (Nichicon Type 797MA) | ZedLabz","description":"\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Replacement electrolytic capacitor set for PS1 Nichicon Type 797MA power boards\u003cbr\u003e- Contains the capacitors listed below\u003cbr\u003e- Soldering required\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eReplacement electrolytic capacitor set for Sony PS1 Nichicon (Type 797MA) power boards.\u003cbr\u003e\u003cbr\u003eFits power board 1-468-307-12 (Nichicon ZSSR797MA).\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCapacitors included:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- C003: 100uF 200V\u003cbr\u003e- C101: 560uF 16V\u003cbr\u003e- C102: 560uF 16V\u003cbr\u003e- C103: 180uF 16V\u003cbr\u003e- C104: 180uF 16V\u003cbr\u003e- C105: 2.2uF 50V\u003cbr\u003e- C106: 1uF 50V\u003cbr\u003e\u003cbr\u003eCheck your board's part number against the list above before ordering. Fitting means desoldering the old capacitors and soldering in the new ones the correct way round, and the console must be opened to fit them.\u003cbr\u003e\u003cbr\u003eThese are general electronic components supplied for repair use. This is an unofficial product which is not manufactured by, endorsed, sponsored or licensed by Sony Interactive Entertainment.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,HOT,VENT,GUIDE\" data-zl-file=\"\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Capacitors are polarised – fit the correct way round.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":67824308257020,"sku":"400990","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/capacitor-set-for-ps1-power-board-nichicon-type-797ma-zedlabzzedlabz-2997764.jpg?v=1792551366"},{"product_id":"capacitor-set-for-ps1-power-board-panasonic-type-169-zedlabz","title":"Capacitor set for PS1 power board (Panasonic Type 169) | ZedLabz","description":"\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Replacement electrolytic capacitor set for PS1 Panasonic Type 169 power boards\u003cbr\u003e- Contains the capacitors listed below\u003cbr\u003e- Soldering required\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eReplacement electrolytic capacitor set for Sony PS1 Panasonic (Type 169) power boards.\u003cbr\u003e\u003cbr\u003eFits power boards 1-468-302-11 (Matsushita \/ Panasonic ETXNY169J1B), 1-468-305-11 (Matsushita \/ Panasonic ETXNY169A1B) and 1-468-365-11 (ETXNY209A1B).\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCapacitors included:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- C003: 120uF 200V\u003cbr\u003e- C102: 560uF 25V\u003cbr\u003e- C103: 560uF 25V\u003cbr\u003e- C104: 220uF 25V\u003cbr\u003e- C105: 220uF 25V\u003cbr\u003e- C107: 1uF 50V\u003cbr\u003e\u003cbr\u003eCheck your board's part number against the list above before ordering. Fitting means desoldering the old capacitors and soldering in the new ones the correct way round, and the console must be opened to fit them.\u003cbr\u003e\u003cbr\u003eThese are general electronic components supplied for repair use. This is an unofficial product which is not manufactured by, endorsed, sponsored or licensed by Sony Interactive Entertainment.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,HOT,VENT,GUIDE\" data-zl-file=\"\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Capacitors are polarised – fit the correct way round.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":67824308814076,"sku":"400991","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/capacitor-set-for-ps1-power-board-panasonic-type-169-zedlabzzedlabz-5721989.jpg?v=1792551366"},{"product_id":"mainboard-capacitor-set-for-original-xbox-console-version-1-2-1-5-zedlabz","title":"Mainboard capacitor set for Original Xbox console Version 1.2-1.5 | ZedLabz","description":"\u003cb\u003eFeatures:\u003c\/b\u003e _x000d_\n\u003cbr\u003e\u003cbr\u003e- Capacitor set for Xbox Original console. \u003cbr\u003e_x000d_\n- Includes 5 Panasonic branded 1500uf 6.3 volt capacitors.\u003cbr\u003e- Can fix power problems for Xbox Original console or leaked capacitors on version 1.0-1.1 motherboards. \u003cbr\u003e- Requires internal soldering. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003c\/b\u003e _x000d_\n\u003cbr\u003e\u003cbr\u003eThis repair kit includes 5 capacitors needed to resolve problems such as the Xbox Original won't power on or leaked capacitors on earliest motherboards 1.0-1.1. \u003cbr\u003e\u003cbr\u003eThe 5 capacitor kit is compatible with Xbox Original console.\u003cbr\u003e\u003cbr\u003eThese are Panasonic FR series low ESR 1500uf 6.3 Volt capacitors.  \u003cbr\u003e\u003cbr\u003eA reasonable level of soldering ability are required to install the replacement capacitors. The console must be opened to install. \u003cbr\u003e\u003cbr\u003eT10, T15 \u0026amp; T20 Torx screwdriver is required to open the console (Not included).\u003cbr\u003e\u003cbr\u003eSoldering iron, solder \u0026amp; desoldering braid required to fit capacitors, (not included). \u003cbr\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":67824310386940,"sku":"300085","price":8.99,"currency_code":"GBP","in_stock":true}]},{"product_id":"mainboard-capacitor-set-for-original-xbox-console-version-1-6-zedlabz","title":"Mainboard capacitor set for Original Xbox console Version 1.6 | ZedLabz","description":"\u003cb\u003eFeatures:\u003c\/b\u003e _x000d_\n\u003cbr\u003e\u003cbr\u003e- Capacitor set for Xbox Original console. \u003cbr\u003e_x000d_\n- Includes 5 Panasonic branded 1500uf 6.3 volt capacitors.\u003cbr\u003e- Can fix power problems for Xbox Original console or leaked capacitors on version 1.0-1.1 motherboards. \u003cbr\u003e- Requires internal soldering. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003c\/b\u003e _x000d_\n\u003cbr\u003e\u003cbr\u003eThis repair kit includes 5 capacitors needed to resolve problems such as the Xbox Original won't power on or leaked capacitors on earliest motherboards 1.0-1.1. \u003cbr\u003e\u003cbr\u003eThe 5 capacitor kit is compatible with Xbox Original console.\u003cbr\u003e\u003cbr\u003eThese are Panasonic FR series low ESR 1500uf 6.3 Volt capacitors.  \u003cbr\u003e\u003cbr\u003eA reasonable level of soldering ability are required to install the replacement capacitors. The console must be opened to install. \u003cbr\u003e\u003cbr\u003eT10, T15 \u0026amp; T20 Torx screwdriver is required to open the console (Not included).\u003cbr\u003e\u003cbr\u003eSoldering iron, solder \u0026amp; desoldering braid required to fit capacitors, (not included). \u003cbr\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":67824378085628,"sku":"300048","price":8.99,"currency_code":"GBP","in_stock":true}]},{"product_id":"mainboard-capacitor-set-for-original-xbox-console-version-1-0-1-1-zedlabz","title":"Mainboard capacitor set for Original Xbox console Version 1.0-1.1 | ZedLabz","description":"\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Capacitor set for Original Xbox version 1.0-1.1 motherboards\u003cbr\u003e- Includes 5 Panasonic FR series low-ESR 1500uF 6.3V capacitors\u003cbr\u003e- Replaces leaking or failed capacitors that can stop the console powering on\u003cbr\u003e- Soldering required\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThis kit includes the 5 capacitors needed to recap an Original Xbox version 1.0-1.1 motherboard, where leaking capacitors are a common cause of power faults.\u003cbr\u003e\u003cbr\u003eThe capacitors are Panasonic FR series low-ESR 1500uF 6.3V parts.\u003cbr\u003e\u003cbr\u003eA reasonable level of soldering ability is required and the console must be opened to fit them. T10, T15 and T20 Torx screwdrivers are needed to open the console, plus a soldering iron, solder and desoldering braid (not included).\u003cbr\u003e\u003cbr\u003eThese are general electronic components supplied for repair use. This is an unofficial product which is not manufactured by, endorsed, sponsored or licensed by Microsoft.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,HOT,VENT,GUIDE\" data-zl-file=\"\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Capacitors are polarised – fit the correct way round.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":67824378151164,"sku":"300234","price":8.99,"currency_code":"GBP","in_stock":true}]}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/collections\/zl515198025980.png?v=1794634341","url":"https:\/\/www.zedlabz.com\/collections\/capacitor-kits-for-retro-home-consoles.oembed","provider":"ZedLabz","version":"1.0","type":"link"}