{"title":"Optical Drive Emulators (ODE) \u0026 Development Tools for Nintendo GameCube","description":"\u003cp\u003eExplore GameCube homebrew and game development with optical drive emulators (ODE), IPL loaders and region-free mods. The range includes PicoLoader drive replacements, PicoBoot boards, flex cables and brackets, KunaiGC and region-free chips. Ideal for developers, testers and collectors who want to run homebrew on DOL-001, DOL-101 and Panasonic Q consoles.\u003c\/p\u003e","products":[{"product_id":"replacement-xeno-chip-for-nintendo-gamecube-console-internal-zedlabz","title":"Region free IC chip for Nintendo GameCube console XENO | ZedLabz","description":"\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Replacement XENO chip for Nintendo GameCube\u003cbr\u003e- Removes region lock from the console.\u003cbr\u003e- Internal part. \u003cbr\u003e- Compatible with Nintendo GameCube console\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eReplacement XENO chip for Nintendo GameCube console.\u003cbr\u003e\u003cbr\u003eInternal product, console will need to be disassembled to install this part, please seek professional assistance if unsure.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,HOT,VENT,GUIDE\" data-zl-file=\"ZL-TF-ELEC-BOARD-S00-006\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":39261356228779,"sku":"800969","price":6.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/products\/region-free-ic-chip-for-nintendo-gamecube-console-xeno-zedlabz800969zedlabz-708486.jpg?v=1741476042"},{"product_id":"raspberry-pi-pico-rp2040-pcb-board-for-picoboot-nintendo-gamecube-mod-raspberry-pi","title":"Raspberry Pi Pico RP2040 PCB board for Picoboot Nintendo GameCube mod | Raspberry Pi","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Raspberry Pi Pico microcontroller board.\u003cbr\u003e- Based on the RP2040 microcontroller chip.\u003cbr\u003e- Micro USB conection port.\u003cbr\u003e- Ideal for use with the Picoboot project for GameCube\u003cbr\u003e- Supplied without software installed e.g. Picoboot.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Raspberry Pi Pico micro controller board is a low cost mini programmable PCB based on the 2040 micro controller chip.\u003cbr\u003e\u003cbr\u003eYou can create your very own code and program the board or program it with any number of free code projects offered online in various communities.\u003cbr\u003e\u003cbr\u003eThe Picoboot project by Webhdx is one such project that utilises the Pico board to allow you to boot up home brew software on your GameCube console.\u003cbr\u003e\u003cbr\u003eBy programming this board at home with the free code, and soldering five wires you can have the Picoboot software running on your GameCube console.\u003cbr\u003e\u003cbr\u003eThanks goes to Webhdx for creating this fantastic Pico based project for the GameCube, please support the original creator by donating to his page on GitHub.\u003cbr\u003e\u003cbr\u003eFull details and official wiring instructions are available on GitHub here: https:\/\/github.com\/webhdx\/PicoBoot\u003cbr\u003e\u003cbr\u003eGenuine Raspberry PI Pico micro controller board, we source our stock from major UK distributors and only offer 100% official Raspberry Pi boards.\u003cbr\u003e\u003cbr\u003eMicro USB cable required for programming of the board, cable not included.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,HOT,VENT,GUIDE\" data-zl-file=\"ZL-IF-RASPBERRYPI\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Raspberry Pi · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Raspberry Pi","offers":[{"title":"Default Title","offer_id":43320998527228,"sku":"100730","price":6.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/1yhrcjyltan.jpg?v=1793998366"},{"product_id":"picoboot-installation-mount-bracket-for-nintendo-gamecube-raspberry-pi-pico-3d-printed-zedlabz-zedlabz","title":"Picoboot installation Mount bracket for Nintendo GameCube Raspberry Pi Pico 3D printed NGC | ZedLabz","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Mount bracket for Raspberry Pi Pico microcontroller board including W version\u003cbr\u003e- Used in mount the Pico in the GameCube next to the cooling fan.\u003cbr\u003e- Friction fit with option to install M2 x 5MM self tapping screws.\u003cbr\u003e- May support other 2040 based microcontroller chip boards\u003cbr\u003e- Accepts board dimensions 21mm width by 1mm depth.\u003cbr\u003e- Includes 3D printed in black ABS \u0026amp; 2 M2 x 5mm screws.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eIf your wondering where to locate your Pico and how to mount it inside your GameCube then this 3D printed mount bracket is for you.\u003cbr\u003e\u003cbr\u003eYou can use this stand with both the standard Pico and the wireless Pico (W version).\u003cbr\u003e\u003cbr\u003eDesigned and printed in house, this bracket has gone through over 15 iterations to come to this final design tested by the team here at ZedLabz. \u003cbr\u003e\u003cbr\u003eThe mount installs next to the cooling fan inside the GameCube and utilities an original chassis screw for the installation.\u003cbr\u003e\u003cbr\u003eSimply remove one original Philips cross screw, place the mount into position and refit the screw.\u003cbr\u003e\u003cbr\u003eThe Pico board slides into the top of the mount with the friction fit, with the option to install two M2 x 5MM self tapping screws if you wish (included).\u003cbr\u003e\u003cbr\u003eThis mount is available on Thingiverse to print at home if you own a 3D printer, you can find it here:\u003cbr\u003e\u003cbr\u003ehttps:\/\/www.thingiverse.com\/thing:5427152\u003cbr\u003e\u003cbr\u003eThanks goes to Webhdx for creating this fantastic Pico based project for the GameCube, please support the original creator by donating to his page on GitHub.\u003cbr\u003e\u003cbr\u003eFull details and official wiring instructions are available on GitHub here: https:\/\/github.com\/webhdx\/PicoBoot\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,GUIDE\" data-zl-file=\"ZL-TF-MECH-S00-007\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":43321151389948,"sku":"100731","price":3.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/pzm2f4krqod.jpg?v=1793998377"},{"product_id":"quick-solder-flex-cable-for-picoboot-nintendo-gamecube-dol-001-helder-game-tech","title":"Quick solder flex cable for Picoboot Nintendo GameCube DOL-001| Helder Game Tech","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Quick install flex cable for installing Picoboot mod into the GameCube.\u003cbr\u003e- Compatible with GameCube model DOL-001\u003cbr\u003e- Makes solvering to the IPL chip much easier, no wires.\u003cbr\u003e- Includes adhesive to mount this flex with the pico soldered.\u003cbr\u003e- Raspberry Pico not included - Available separately.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis easy install flex cabble from Helder makes soldering the Picoboot mod much easier, there is no wires needed, you can simply create a solder bridge from the relevant pins on the IPL chip to the solder pads on the ribbon. The Pico board also installs in the same way, soldering from the pads on the Pico to the pads on the flex ribbon, no wires.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWarning: Soldering is required to install a Pico - Soldering difficulty level medium. \u003c\/strong\u003eSoldering experience is required even with an easy install flex, the flex simplifies the installation by having no loose wires to run aroung the console, making it easier to fit, but the difficulty of soldering is not solved with the use of this product. Install involves soldering to legs of an IC chip on the motherboard which are quite small, particularly for the less experienced in soldering. It is recommended you seek a professional installer if you are not used to soldering small pins. A good quality temperature controlled soldering iron and flux is advised. Incorrect installation couild result in things such as solder bridging pins on the IC chip, bad soldering may damage the motherboard once turned on, installation of a Pico into a Gamecube is done at the installers own risk.\u003cbr\u003e\u003cbr\u003ePlease note that the Picoboot mod is still a beta release and community project subject to change, the creator Webhdx is working on new firmware to fix a minor issue with the in game reset (IGR) and this this firmware may require the soldering of one wire in the future, there is no ETA on future firmware for Picoboot, the existing firmware is stable and the update will likely only resolve this IGR function or add future functionality that would be optional.\u003cbr\u003e\u003cbr\u003eWhen installing a Pico into the GameCube you will need to remove the heatsink, in doing so the thermal pads might become damaged, or they might simply be warn and in need of replacement, we offer thermal pads specifically for the GameCube in store, it is recommended that you purchase new thermal pads when fitting a pico.\u003cbr\u003e\u003cbr\u003eThis flex is for the non W version of Pico\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,HOT,VENT,GUIDE\" data-zl-file=\"ZL-IF-HELDERGAMETECH-CABLE-INT\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Helder Game Tech · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Helder Game Tech","offers":[{"title":"Default Title","offer_id":43876565319932,"sku":"200745","price":6.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/y204alrzbno.jpg?v=1793999615"},{"product_id":"raspberry-pi-pico-w-wireless-network-rp2040-pcb-board-for-picoboot-nintendo-gamecube-mod-raspberry-pi","title":"Raspberry Pi Pico W (Wireless network) RP2040 PCB board for Picoboot Nintendo GameCube mod | Raspberry Pi","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Raspberry Pi Pico W microcontroller board.\u003cbr\u003e- Based on the RP2040 microcontroller chip.\u003cbr\u003e- Micro USB conection port.\u003cbr\u003e- Ideal for use with the Picoboot project for GameCube\u003cbr\u003e- Supplied without software installed e.g. Picoboot.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Raspberry Pi Pico micro controller board is a low cost mini programmable PCB based on the 2040 micro controller chip. This variant \"W\" also has wireless network capabilities (single-band 2.4GHz wireless interfaces (802.11n).\u003cbr\u003e\u003cbr\u003eYou can create your very own code and program the board or program it with any number of free code projects offered online in various communities.\u003cbr\u003e\u003cbr\u003eThe Picoboot project by Webhdx is one such project that utilises the Pico board to allow you to boot up home brew software on your GameCube console.\u003cbr\u003e\u003cbr\u003eBy programming this board at home with the free code, and soldering five wires you can have the Picoboot software running on your GameCube console.\u003cbr\u003e\u003cbr\u003eThanks goes to Webhdx for creating this fantastic Pico based project for the GameCube, please support the original creator by donating to his page on GitHub.\u003cbr\u003e\u003cbr\u003eFull details and official wiring instructions are available on GitHub here: https:\/\/github.com\/webhdx\/PicoBoot\u003cbr\u003e\u003cbr\u003eGenuine Raspberry PI Pico micro controller board, we source our stock from major UK distributors and only offer 100% official Raspberry Pi boards.\u003cbr\u003e\u003cbr\u003eMicro USB cable required for programming of the board, cable not included.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,HOT,VENT,GUIDE\" data-zl-file=\"ZL-IF-RASPBERRYPI\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Raspberry Pi · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Raspberry Pi","offers":[{"title":"Default Title","offer_id":43932777087228,"sku":"100582","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/xzuh5m4da4k.jpg?v=1793999987"},{"product_id":"kunaigc-ipl-loader-for-nintendo-gamecube-dol-001-swiss-region-free-mod-retroverse","title":"KunaiGC IPL loader for Nintendo GameCube DOL-001 Swiss \u0026 Region free mod | Retroverse","description":"\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- IPL (Initial Program  Loader) replacment for Nintendo GameCube\u003cbr\u003e- Internal part - Requires expert installation\u003cbr\u003e- QSB - Quick Solder Board for easy installation process\u003cbr\u003e- Supports region free via Swiss, KunaiRecovery \u0026amp; Cubeboot\u003cbr\u003e- Only compatible with DOL-001\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe KunaiGC is an all-in-one IPL replacement for the Nintendo Gamecube DOL-001.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePlease note: This is an expert level mod that requires experience with fine soldering\u003c\/strong\u003e, the console needs to be dissassembled to install, please seek a professional installer if you are unsure about fitting. \u003cbr\u003e\u003cbr\u003eThis will not work with a DOL-101 model.\u003cbr\u003e\u003cbr\u003eThis is a DIY mod and as such it is installed at your own risk. Incorrect installation couild result in things such as solder bridging pins on the IC chip, bad soldering may damage the motherboard once turned on,\u003cbr\u003e\u003cbr\u003eOnce installed the Kunai allows direct booting into Swiss, which provides added features such as the ability to run homebrew software and play games from all regions.\u003cbr\u003e\u003cbr\u003eWorks with SD2SP2 serial port adapters to load files from a microsd card.\u003cbr\u003e\u003cbr\u003eCompatible with Nintendo GameCube model DOL-001 only. \u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,HOT,VENT,GUIDE\" data-zl-file=\"ZL-IF-RETROVERSE-OTHER\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Retroverse · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Retroverse","offers":[{"title":"Default Title","offer_id":45465472434428,"sku":"300144","price":29.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/prienf3b5x2.jpg?v=1794004688"},{"product_id":"picoloader-flex-and-bracket-bundle","title":"PicoLoader ODE Picoboot style flex cable and bracket bundle for Nintendo GameCube Rev 1.4 | ZedLabz","description":"\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePicoLoader flex 1.4 for Nintendo GameCube\u003c\/li\u003e\r\n\u003cli\u003ePicoboot style mod retaining DVD drive\u003c\/li\u003e\r\n\u003cli\u003eNo soldering to the GameCube motherboard\u003c\/li\u003e\r\n\u003cli\u003e\u003cstrong\u003eCare must be taken not to fold or hard crease the flex\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003cli\u003eSoldering required for Rasberry Pico \u0026amp; Diode.\u003c\/li\u003e\r\n\u003cli\u003eIncludes 2 x Flex, Diode, 3D printed bracket and screws\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe PicoLoader is straightforward and cost effective picoboot style modification for the Nintendo GameCubbe. It is perfect for those diving into homebrew or eager to expand their console’s capabilities, whilst avoiding perminently modding the motherboard, or sacrificing the original DVD drive.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eWarning! Installation Caution — Please Read First\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eDo NOT fold the flex ribbon cable!\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe flex cable is very thin, and internal traces can break if sharply creased. Only bend it to form smooth curves—no hard folds allowed. We will not provide replacements for folded ribbon cables, you will need to purchase the kit again if you damage it, you will need to take your time and keep gently squeezing and manipulating until you have the desired shape without hard creases or folds.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eTake extra care during soldering:\u003c\/strong\u003e Flex PCBs are prone to delamination from overheating. We recommend using low‑melting point solder and keeping soldering iron contact time as short as possible to avoid damaging the flex.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFurther description:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe PicoLoader uses the same tiny Raspberry Pi Pico to allow homebrew loading, but requires no soldering to the motherboard, plus it retains the original disc drive for your physical games.\u003c\/p\u003e\r\n\u003cp\u003eThe main difference with installing the picoloader is that there is no soldering to the consoles motherboard, instead the flex is carefully bend into the shape of the DVD drive connection port and it intercepts the same connection pins as the original DVD drive.\u003c\/p\u003e\r\n\u003cp\u003eThe Rasberry pico will require setup with software loaded to it from a PC, you will need your own Rasberry pico, usb cable and computer to do this.\u003c\/p\u003e\r\n\u003cp\u003eFor more information on the required open source software needed and the installation guide visit the following links:\u003c\/p\u003e\r\n\u003cp\u003ehttps:\/\/github.com\/makeo\/PicoLoader\u003c\/p\u003e\r\n\u003cp\u003ehttps:\/\/github.com\/makeo\/PicoLoader\/wiki\/1.-Home\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eWhat’s in the Box?\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePico Loader 1.4 flex ribbon PCB\u003c\/li\u003e\r\n\u003cli\u003e1N5819 Schottky Diode\u003c\/li\u003e\r\n\u003cli\u003e3D printed bracket\u003c\/li\u003e\r\n\u003cli\u003ePhilips mounting screws for bracket\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eWhat else will you need?\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eCare \u0026amp; patience for bending the DVD drive interface part of the cable (no folding!)\u003c\/li\u003e\r\n\u003cli\u003eSolder and soldering iron, suggest low melting point solder\u003c\/li\u003e\r\n\u003cli\u003escrewdrivers and gamebit tools for opening gamecube\u003c\/li\u003e\r\n\u003cli\u003eRaspberry PI board, USB cable and computer to load software\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eRevision notes:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eThis is the first public iteration of PicoLoader, produced to the creator’s advised specifications—using the provided open source files, no modifications to the design have been made by us so it matches the creators version 1.4\u003c\/p\u003e\r\n\u003cp\u003eAs an evolving project, future versions may be refined or updated, the current version being provided is 1.4, it is expected that other versions may be made which will offer variants but possibly not replace this version entirely.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eLicense and recognition:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eOpen Source \u0026amp; Community-Powered\u003cbr\u003eOpen‑Source license under the GPL‑2.0 license\u003c\/p\u003e\r\n\u003cp\u003eHuge thanks to the modding enthusiasts, developers, and contributors who made PicoLoader possible. \u003c\/p\u003e\r\n\u003cp\u003eSpecial Thanks to:\u003c\/p\u003e\r\n\u003cp\u003eMakeo for developing this project with help from the community.\u003c\/p\u003e\r\n\u003cp\u003e- Silversteel for his help, especially for making the flex PCBs and mounts\u003cbr\u003e- TeamOffBroadway for the amazing idea to use a flex PCB to intercept the drive signals\u003cbr\u003e- Extrems, emukidid and everyone involved in creating swiss\u003cbr\u003e- novenary (9ary) for gekkoboot\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,HOT,VENT,GUIDE\" data-zl-file=\"ZL-TF-CABLE-INT-S00-003\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":47586069807356,"sku":"111001","price":8.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/picoloader-ode-picoboot-style-flex-cable-and-bracket-bundle-for-nintendo-gamecube-rev-14-zedlabzzedlabz-8660313.png?v=1762799397"},{"product_id":"picoloader-ode-picoboot-for-nintendo-gamecube-pre-assembled-installation-ready-zedlabz","title":"PicoLoader ODE Picoboot for Nintendo GameCube pre-assembled \u0026 installation ready | Makeo","description":"\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePicoLoader flex 1.4 for Nintendo GameCube\u003c\/li\u003e\r\n\u003cli\u003ePre assembled, solderless version by Makeo\u003c\/li\u003e\r\n\u003cli\u003ePicoloader firmware \u0026amp; swiss preinstalled.\u003c\/li\u003e\r\n\u003cli\u003eGenuine Raspberry Pi chip.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eCare must be taken when installing not to break the ribbon as it is fragile.\u003c\/strong\u003e\n\u003c\/li\u003e\r\n\u003cli\u003eIncludes 3D printed bracket for mounting.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe PicoLoader is straightforward and cost effective picoboot style modification for the Nintendo GameCube. It is perfect for those diving into homebrew or eager to expand their console’s capabilities, whilst avoiding perminently modding the motherboard, or sacrificing the original DVD drive.\u003cbr\u003e\u003cbr\u003eThis model is designed and by the creator of Picloader, and offers the benefit having a replacable ribbon flex and being solderless. The benefit of having the ribbon detached from the pico is that you do not have the weight of the pico board when trying to install the flex, you also have a second chance ribbon if you do not fold the first ribbon correctly, plus further ribbon replacements can also be purchased seperately as required.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eWarning! Installation Caution — Please Read First\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eDo NOT fold the flex ribbon cable!\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe flex cable is very thin, and internal traces can break if sharply creased. Only bend it to form smooth curves—no hard folds allowed. We will not provide replacements for folded ribbon cables, you will need to purchase a replacement ribbon flex if you damage the two included ribbons.\u003cbr\u003e\u003cbr\u003eA free 3D printed folding tool is included as one option for creating the folds needed for the installation of this mod.\u003cbr\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFurther description:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe PicoLoader uses the same tiny Raspberry Pi Pico to allow homebrew loading, but requires no soldering to the motherboard, plus it retains the original disc drive for your physical games.\u003c\/p\u003e\r\n\u003cp\u003eThe main difference with installing the picoloader is that there is no soldering to the consoles motherboard, instead the flex is carefully bend into the shape of the DVD drive connection port and it intercepts the same connection pins as the original DVD drive.\u003c\/p\u003e\r\n\u003cp\u003eThe solderless install Rasberry pico is include in this kit and is pre-loaded with the firmware, no need to set it up on a PC.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eWhat’s in the Box?\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePico Loader 1.4 flex ribbon preassembled\u003c\/li\u003e\n\u003cli\u003eTwo ribbon flex cables.\u003c\/li\u003e\r\n\u003cli\u003ePre-installed software.\u003c\/li\u003e\r\n\u003cli\u003eMounting bracket for install into the GameCube.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eWhat else will you need?\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eScrewdrivers and gamebit tools for opening gamecube (not included)\u003c\/li\u003e\r\n\u003cli\u003eSD2SP2 or similar to load software from a memory card (not included)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eRevision notes:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eThis is the first public iteration of the solderless PicoLoader, produced by the original creator as the optimal model for installing this mod, so far feedback on the solderless version is good and the benefits over DIY versions and those without a replacable ribbon are being seen through succesful installs.\u003c\/p\u003e\r\n\u003cp\u003eAs an evolving project, future versions may be refined or updated, the current version being provided is 1.4, it is expected that other versions may be made which will offer variants but possibly not replace this version entirely.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eLicense and recognition:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eOpen Source \u0026amp; Community-Powered\u003cbr\u003eOpen‑Source license under the GPL‑2.0 license\u003c\/p\u003e\r\n\u003cp\u003eHuge thanks to the modding enthusiasts, developers, and contributors who made PicoLoader possible. \u003c\/p\u003e\r\n\u003cp\u003eSpecial Thanks to:\u003c\/p\u003e\r\n\u003cp\u003eMakeo for developing this project with help from the community.\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eSilversteel for his help, especially for making the flex PCBs and mounts\u003cbr\u003e- TeamOffBroadway for the amazing idea to use a flex PCB to intercept the drive signals\u003cbr\u003e- Extrems, emukidid and everyone involved in creating swiss\u003cbr\u003e- novenary (9ary) for gekkoboot\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,GUIDE\" data-zl-file=\"ZL-IF-MAKEO\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Makeo · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Makeo","offers":[{"title":"Default Title","offer_id":47806504042748,"sku":"000966","price":26.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/picoloader-ode-picoboot-for-nintendo-gamecube-pre-assembled-installation-ready-makeomakio-8168843.jpg?v=1762799399"},{"product_id":"replacement-flex-cable-for-no-solder-picoloader-v14-makeo","title":"Replacement flex cable for solderless pre-assembled Picoloader V1.4 | Makeo","description":"\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\r\n\u003cul\u003e\r\n  \u003cli\u003eOfficial replacement flex cable for the Makeo solderless Picoloader ODE kit\u003c\/li\u003e\r\n  \u003cli\u003eCorrect length, routing and connector layout for reliable installation\u003c\/li\u003e\r\n  \u003cli\u003eIdeal replacement if the original flex becomes torn, creased or folded incorrectly\u003c\/li\u003e\r\n  \u003cli\u003eNot compatible with Bitfunx, Retroscaler or DIY all-in-one flex designs\u003c\/li\u003e\r\n  \u003cli\u003eFlex cable only – no additional Picoloader components included\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\r\n\u003cp\u003e\r\nThis replacement flex cable is designed specifically for the Makeo version of the solderless Picoloader (PicoBoot) ODE for Nintendo GameCube. It matches the exact specifications of the flex supplied in the full kit, making it the correct spare when the original cable is damaged.\r\n\u003c\/p\u003e\r\n\r\n\u003cp\u003e\r\nDuring installation, the flex must be routed and folded carefully. Because it is a thin, delicate component, it can be damaged if folded too sharply, bent repeatedly, pinched between shell parts during reassembly. You may require a replacement flex if the original cable has been creased, torn, kinked, or folded incorrectly, or if it fails after overstressing the copper traces.\r\n\u003c\/p\u003e\r\n\r\n\u003cp\u003e\r\nTo avoid compatibility issues, this flex is made for the Makeo solderless Picoloader only. It will not function with Bitfunx, Retroscaler or DIY all-in-one flex versions, as these use different layouts and connector sizings.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\r\nBecause flex cables are considered a consumable install component, they cannot be replaced under warranty once they have been folded or installed. A new flex may be required if the original is damaged during fitting.\r\n\u003c\/p\u003e\r\n\r\n\u003cb\u003eCompatibility Overview:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\r\n\r\n\u003ctable\u003e\r\n  \u003ctbody\u003e\n\u003ctr\u003e\r\n    \u003cth\u003ePicoloader Version\u003c\/th\u003e\r\n   \u003cth\u003eWorks?\u003c\/th\u003e\r\n    \u003cth\u003eNotes\u003c\/th\u003e\r\n  \u003c\/tr\u003e\r\n  \u003ctr\u003e\r\n    \u003ctd\u003eMakeo Picoloader (Solderless Version)\u003c\/td\u003e\r\n    \u003ctd\u003e\u003cb\u003eYes\u003c\/b\u003e\u003c\/td\u003e\r\n    \u003ctd\u003eExact replacement flex - Original part supplied by Makeo\u003c\/td\u003e\r\n  \u003c\/tr\u003e\r\n  \u003ctr\u003e\r\n    \u003ctd\u003eBitfunx Picoloader\u003c\/td\u003e\r\n    \u003ctd\u003e\u003cb\u003eNo\u003c\/b\u003e\u003c\/td\u003e\r\n    \u003ctd\u003eDifferent flex design and connector size\u003c\/td\u003e\r\n  \u003c\/tr\u003e\r\n  \u003ctr\u003e\r\n    \u003ctd\u003eRetroscaler Picoloader\u003c\/td\u003e\r\n    \u003ctd\u003e\u003cb\u003eNo\u003c\/b\u003e\u003c\/td\u003e\r\n    \u003ctd\u003eSame as Bitfunx version, wrong size.\u003c\/td\u003e\r\n  \u003c\/tr\u003e\r\n  \u003ctr\u003e\r\n    \u003ctd\u003eDIY All-in-One Flex\u003c\/td\u003e\r\n    \u003ctd\u003e\u003cb\u003eNo\u003c\/b\u003e\u003c\/td\u003e\r\n    \u003ctd\u003eDIY versions have no replacable flex, they are all in one.\u003c\/td\u003e\r\n  \u003c\/tr\u003e\r\n  \u003ctr\u003e\r\n    \u003ctd\u003eUnmodded Nintendo GameCube\u003c\/td\u003e\r\n    \u003ctd\u003e\u003cb\u003eNo\u003c\/b\u003e\u003c\/td\u003e\r\n    \u003ctd\u003eRequires the full Picoloader kit\u003c\/td\u003e\r\n  \u003c\/tr\u003e\r\n\u003c\/tbody\u003e\n\u003c\/table\u003e\r\n\r\n\u003cbr\u003e\u003cb\u003eFurther Info:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\r\n\u003cul\u003e\r\n  \u003cli\u003eReplacement flex cable for Makeo Picoloader solderless ODE\u003c\/li\u003e\r\n  \u003cli\u003eNot compatible with Bitfunx, Retroscaler or DIY PicoBoot flex parts\u003c\/li\u003e\r\n  \u003cli\u003eCompatible only with existing Makeo hardware\u003c\/li\u003e\r\n  \u003cli\u003eIncludes: 1× flex cable only\u003c\/li\u003e\r\n  \u003cli\u003eFlex cables are consumable components and not covered under warranty once folded or installed\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cb\u003eFAQ:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\r\n\r\n\u003cp\u003e\u003cb\u003eQ: Why might I need a replacement flex?\u003c\/b\u003e\u003cbr\u003e\r\nFlex cables can be damaged by sharp folds, over-bending, pressure during shell closure, or tearing at the connector. If the original cable is creased or torn, a replacement is required.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cb\u003eQ: Will this work with Bitfunx, Retroscaler or DIY Picoloader versions?\u003c\/b\u003e\u003cbr\u003e\r\nNo. Each manufacturer uses a different flex layout. This cable is for the Makeo solderless design only.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cb\u003eQ: Is the flex covered under warranty?\u003c\/b\u003e\u003cbr\u003e\r\nNo. Because flex cables are thin, installation-sensitive components, they are considered consumables and are not warrantable once folded or installed.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cb\u003eQ: What is included?\u003c\/b\u003e\u003cbr\u003e\r\nThis listing includes only the flex cable. No Pico board, SD adapter, bracket or tools are included.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"GUIDE\" data-zl-file=\"ZL-IF-MAKEO\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Makeo · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Makeo","offers":[{"title":"Default Title","offer_id":48517511381244,"sku":"300035","price":4.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/replacement-flex-cable-for-solderless-pre-assembled-picoloader-v14-makeomakeo-8511804.jpg?v=1763573015"},{"product_id":"optical-drive-emulator-for-nintedo-gamecube-cubeode","title":"Optical drive emulator ODE laser replacement for Nintendo GameCube game development \u0026 testing SD loader | CUBEODE","description":"\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n  \u003cli\u003eFlash cartridge designed for Sega Saturn consoles\u003c\/li\u003e\r\n  \u003cli\u003eLoads software directly from a microSD card\u003c\/li\u003e\r\n  \u003cli\u003ePlug-and-play operation with no internal modding\u003c\/li\u003e\r\n  \u003cli\u003eSupports digital loading without relying on the optical drive\u003c\/li\u003e\r\n  \u003cli\u003eSuitable for enthusiasts, developers and preservation work\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\r\nThe Saroo Flash Cartridge is a plug-and-play solution for the Sega Saturn, designed to load software directly from a microSD card. It offers a modern alternative to optical media and provides a practical tool for developers, preservationists and retro console enthusiasts working with original Saturn hardware.\r\n\u003c\/p\u003e\r\n\u003cp\u003e\r\nOnce inserted into the cartridge expansion slot, Saroo enables digital loading without using the optical drive. This can help reduce wear on aging disc mechanisms and simplify access to software for legitimate testing, development or open-source projects. Saroo also includes region-free functionality, a user interface for exploring files on the SD card, and support for saving data back to the card.\r\n\u003c\/p\u003e\r\n\u003cp\u003e\r\nFor developers and hobbyists, Saroo provides a convenient workflow for loading and testing homebrew, prototypes, tools and other authorised content directly from a microSD card. It eliminates the need for repeated disc burning or drive calibration, making Saturn development and diagnostics more accessible.\r\n\u003c\/p\u003e\r\n\u003cp\u003e\r\nFor collectors and hardware enthusiasts, Saroo modernises Saturn systems by offering faster loading, reliable storage, and easier access to software while preserving the console’s original exterior. No soldering, tools, or console disassembly are required—simply insert the cartridge and prepare a compatible microSD card on your computer.\r\n\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eFurther Info\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n  \u003cli\u003eProduct: Saroo Flash Cartridge for Sega Saturn\u003c\/li\u003e\r\n  \u003cli\u003eSlot Compatibility: Sega Saturn cartridge expansion slot\u003c\/li\u003e\r\n  \u003cli\u003eStorage: MicroSD card (user-supplied)\u003c\/li\u003e\r\n  \u003cli\u003eUse Case: Load authorised software from SD media with region-free support\u003c\/li\u003e\r\n  \u003cli\u003eInstallation: Plug-and-play; no soldering or console opening required\u003c\/li\u003e\r\n  \u003cli\u003eConsole Requirements: Original Sega Saturn hardware; not intended for clone or altered systems\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cem\u003eQ: Do I need to open the console to install Saroo?\u003c\/em\u003e\u003cbr\u003e\r\nNo. Saroo installs directly into the Saturn’s cartridge slot and requires no internal modification or tools.\r\n\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cem\u003eQ: What storage does Saroo use?\u003c\/em\u003e\u003cbr\u003e\r\nSaroo uses microSD memory cards. For best performance, use a high-quality card from a reputable manufacturer.\r\n\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cem\u003eQ: Does Saroo replace the optical drive?\u003c\/em\u003e\u003cbr\u003e\r\nIt does not replace the drive physically, but the console can load software directly from the SD card once Saroo is installed, so discs are no longer required for loading authorised content.\r\n\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cem\u003eQ: Does Saroo allow the Saturn to read discs from other regions?\u003c\/em\u003e\u003cbr\u003e\r\nIt does not modify disc region behaviour. However, it allows region-free loading of authorised digital software stored on the SD card.\r\n\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eProduct Safety\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n  \u003cli\u003eNot a toy – contains electronic components and small parts\u003c\/li\u003e\r\n  \u003cli\u003eMicroSD cards are small parts and may pose a choking hazard\u003c\/li\u003e\r\n  \u003cli\u003eEnsure the cartridge is fully inserted before powering the console\u003c\/li\u003e\r\n  \u003cli\u003eUse only with original Sega Saturn consoles; compatibility with clones is not guaranteed\u003c\/li\u003e\r\n  \u003cli\u003eKeep away from moisture, heat sources and static discharge\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eLEGAL NOTICE: Product Use Disclaimer and Limitations of Liability\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eIntended use\u003c\/strong\u003e\u003cbr\u003e\r\nThis product is intended for homebrew development, legitimate testing, and the use of legally obtained, open-source or authorised software. It is designed to support independent developers, hobbyists and preservation work. We do not condone, support or encourage the use of this product for piracy or the loading of unauthorised copyrighted material.\r\n\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eCopyrighted content\u003c\/strong\u003e\u003cbr\u003e\r\nDownloading, sharing or using copyrighted games or software without permission from the rights holder may violate copyright laws in your region. Always ensure that any digital content used with this product complies fully with local copyright regulations.\r\n\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eBack-ups and personal use\u003c\/strong\u003e\u003cbr\u003e\r\nCopyright laws differ by country. In some regions, creating personal back-ups is permitted; in others it is restricted. Customers are responsible for understanding their local laws before creating or using any form of back-up media.\r\n\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eSupport limitations\u003c\/strong\u003e\u003cbr\u003e\r\nCustomer support for this product is limited to legitimate uses such as development, homebrew and authorised open-source content. We cannot provide support for any other usage.\r\n\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eModifications and warranty\u003c\/strong\u003e\u003cbr\u003e\r\nAny unauthorised modification or use outside the intended scope may void all manufacturer and retailer warranties. Use the product only as intended to avoid potential damage or operational issues.\r\n\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"GUIDE\" data-zl-file=\"ZL-IF-CUBEODE\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: CUBEODE · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"CUBEODE","offers":[{"title":"Default Title","offer_id":48567088972028,"sku":"200926","price":59.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/optical-drive-emulator-ode-laser-replacement-for-nintendo-gamecube-game-development-testing-sd-loader-cubeodecubeode-2774239.jpg?v=1764480549"},{"product_id":"replacement-flex-cable-for-solderless-pre-assembled-picoloader-for-panasonic-q-v1-0-makeo","title":"Replacement flex cable for solderless pre-assembled PicoLoader for Panasonic Q V1.0 | Makeo","description":"\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Official replacement flex cable for the Makeo solderless PicoLoader for Panasonic Q\u003cbr\u003e- Panasonic Q specific layout – not the same flex as the standard GameCube version\u003cbr\u003e- Ideal replacement if the original flex becomes torn, creased or folded incorrectly\u003cbr\u003e- Not compatible with standard GameCube, Bitfunx, Retroscaler or DIY all-in-one flex designs\u003cbr\u003e- Flex cable only – no additional PicoLoader components included\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThis replacement flex cable is designed specifically for the Makeo solderless PicoLoader (PicoBoot style) ODE for the Panasonic Q. The Panasonic Q uses its own flex design, so this is the correct spare when the original Q flex has been damaged.\u003cbr\u003e\u003cbr\u003eDuring installation the flex must be routed and folded carefully. Because it is a thin, delicate component, it can be damaged if folded too sharply, bent repeatedly or pinched between shell parts during reassembly. You may need a replacement if the original cable has been creased, torn, kinked or folded incorrectly.\u003cbr\u003e\u003cbr\u003eFor the standard Nintendo GameCube version of the solderless PicoLoader, please choose our standard replacement flex instead.\u003cbr\u003e\u003cbr\u003eBecause flex cables are a consumable install component, they cannot be replaced under warranty once they have been folded or installed.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatibility Overview:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003ctable\u003e\r\n\u003ctbody\u003e\r\n\u003ctr\u003e\n\u003cth\u003ePicoLoader Version\u003c\/th\u003e\n\u003cth\u003eWorks?\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\r\n\u003ctr\u003e\n\u003ctd\u003eMakeo Solderless PicoLoader for Panasonic Q\u003c\/td\u003e\n\u003ctd\u003e\u003cb\u003eYes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eExact replacement flex - original part supplied by Makeo\u003c\/td\u003e\n\u003c\/tr\u003e\r\n\u003ctr\u003e\n\u003ctd\u003eMakeo Solderless PicoLoader for GameCube\u003c\/td\u003e\n\u003ctd\u003e\u003cb\u003eNo\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eDifferent flex - use the standard GameCube replacement flex\u003c\/td\u003e\n\u003c\/tr\u003e\r\n\u003ctr\u003e\n\u003ctd\u003eBitfunx \/ Retroscaler PicoLoader\u003c\/td\u003e\n\u003ctd\u003e\u003cb\u003eNo\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eDifferent flex design and connector size\u003c\/td\u003e\n\u003c\/tr\u003e\r\n\u003ctr\u003e\n\u003ctd\u003eDIY All-in-One Flex\u003c\/td\u003e\n\u003ctd\u003e\u003cb\u003eNo\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eDIY versions have no replaceable flex\u003c\/td\u003e\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e\u003cbr\u003e\u003cb\u003eWhat's in the Box?\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- 1x Panasonic Q solderless flex cable (one per pack)\u003cbr\u003e\u003cbr\u003eNo Pico board, bracket, SD adapter or tools are included.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\r\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\r\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"GUIDE\" data-zl-file=\"ZL-IF-MAKEO\"\u003e\r\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\r\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Makeo · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\r\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Makeo","offers":[{"title":"Default Title","offer_id":68069895045372,"sku":"001180","price":5.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/replacement-flex-cable-for-solderless-pre-assembled-picoloader-for-panasonic-q-v10-makeozedlabz-4084695.jpg?v=1793821703"},{"product_id":"picoloader-ode-picoboot-style-flex-cable-and-bracket-bundle-for-panasonic-q-2-flex-makeo","title":"PicoLoader ODE Picoboot style flex cable and bracket bundle for Panasonic Q - 2 flex | Makeo","description":"\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- PicoLoader ODE kit made specifically for the Panasonic Q\u003cbr\u003e- Picoboot style mod that keeps the original disc drive\u003cbr\u003e- No soldering to the Panasonic Q motherboard\u003cbr\u003e- Includes 2x Panasonic Q flex PCBs, diode, 3D printed bracket and screws\u003cbr\u003e- Raspberry Pi Pico not included – soldering required to fit your Pico and the diode to the flex\u003cbr\u003e- \u003cb\u003eCare must be taken not to fold or hard crease the flex\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe PicoLoader is a straightforward and cost effective Picoboot style modification, here in a version designed by Makeo specifically for the Panasonic Q. It is ideal if you want to run homebrew such as Swiss on your Q without permanently modding the motherboard or sacrificing the original disc drive.\u003cbr\u003e\u003cbr\u003eThe PicoLoader emulates a disc drive during boot, loads a homebrew app (usually Swiss) and then hands control back to the original drive, so you can still play your physical discs.\u003cbr\u003e\u003cbr\u003eInstallation is through a flex PCB that fits into the drive connector, so nothing is soldered to the console itself. Your own Raspberry Pi Pico (not included) and the supplied diode are soldered to the flex PCB before fitting. The Pico needs the PicoLoader firmware loaded from a PC, so you will also need a micro USB cable and a computer.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarning! Installation Caution — Please Read First\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDo NOT fold the flex ribbon cable!\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe flex cable is very thin, and internal traces can break if sharply creased. Only bend it to form smooth curves, no hard folds. A spare flex and a fold key are included, but we cannot replace flex cables damaged during installation.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eTake extra care during soldering:\u003c\/b\u003e Flex PCBs can delaminate if overheated. We recommend low melting point solder and keeping iron contact time as short as possible.\u003cbr\u003e\u003cbr\u003eThis kit is for the Panasonic Q only and is not compatible with a standard Nintendo GameCube. There are no dedicated step-by-step instructions for the Panasonic Q; follow the normal PicoLoader installation guide together with the Panasonic Q notes on the PicoLoader wiki, and the Makeo community Discord for help.\u003cbr\u003e\u003cbr\u003ehttps:\/\/github.com\/makeo\/PicoLoader\u003cbr\u003e\u003cbr\u003ehttps:\/\/github.com\/makeo\/PicoLoader\/wiki\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWhat's in the Box?\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- 2x Panasonic Q flex PCBs (one spare)\u003cbr\u003e- 1x Fold key to help shape the flex\u003cbr\u003e- 1x 1N5819 Schottky diode\u003cbr\u003e- 1x 3D printed bracket\u003cbr\u003e- 2x M2 screws\u003cbr\u003e- 1x Drive plug (for installs without a drive)\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWhat else will you need?\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Raspberry Pi Pico (not included)\u003cbr\u003e- Soldering iron and solder, low melting point solder recommended\u003cbr\u003e- #2 and #0 or #1 Phillips screwdrivers\u003cbr\u003e- Tweezers\u003cbr\u003e- Micro USB cable and a computer to load the firmware to the Pico\u003cbr\u003e- SD2SP2, SD Gecko or similar for storage with Swiss\u003cbr\u003e\u003cbr\u003e\u003cb\u003eLicense and recognition:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eOpen Source \u0026amp; Community-Powered\u003cbr\u003eOpen-Source license under the GPL-2.0 license\u003cbr\u003e\u003cbr\u003eSpecial thanks to Makeo for developing this project with help from the community, including Silversteel, TeamOffBroadway, Extrems, emukidid and everyone involved in creating Swiss, and novenary (9ary) for gekkoboot.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,HOT,VENT,GUIDE\" data-zl-file=\"ZL-IF-MAKEO\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Makeo · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Makeo","offers":[{"title":"Default Title","offer_id":68069895110908,"sku":"001181","price":9.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/picoloader-ode-picoboot-style-flex-cable-and-bracket-bundle-for-panasonic-q-2-flex-makeozedlabz-5820295.jpg?v=1793821702"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/collections\/zedlabz-gamecube-ode-sketch.png?v=1794614651","url":"https:\/\/www.zedlabz.com\/collections\/optical-drive-emulators-ode-development-tools-for-nintendo-gamecube.oembed","provider":"ZedLabz","version":"1.0","type":"link"}