{"title":"Game Boy Advance Speaker \u0026 Audio Repair – Parts \u0026 Tools","description":"\u003cp\u003eFix crackling, quiet or dead sound on your Game Boy Advance. Shop replacement speakers, louder speaker upgrades and audio amplifier mods, plus the tri-wing and Phillips screwdrivers, pry tools and soldering supplies needed to fit them. A blown speaker is one of the most common faults on older handhelds and an easy fix, and each listing shows exactly which model it fits before you order.\u003c\/p\u003e","products":[{"product_id":"zedlabz-tri-wing-cross-wing-philips-security-screwdriver-set-for-nintendo-ds-lite-dsi-xl-game-boy-pocket-colour-advance-advance-sp-wii-wii-u","title":"Tri-wing \u0026 cross wing philips security screwdriver set for Nintendo DS, Lite, DSi, XL, Game boy, pocket, colour, advance, advance sp, Wii, Wii U \u0026 Switch | ZedLabz","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Security and precision screwdriver set for opening various Nintendo games consoles and game cartridges.\u003cbr\u003e- Includes Tri-wing (Y0 \u0026amp; Y00) and Philips (#00) cross-wing screwdriver. \u003cbr\u003e- Allows various games consoles and game cartridges to be opened for repair or modification.\u003cbr\u003e- Compatible with Nintendo Switch, DS, DS Lite, DSi, Game boy advance, advance SP, micro, Wii \u0026amp; Wii U consoles.\u003cbr\u003e- Also opens Game boy advance game cartridges, gamecube and Wii controllers.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eRepair or modify your own gamesconsoles, games and controllers with the ZedLabz security and precision screwdriver set\u003cstrong\u003e.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eIn order to get under the hood of your console, game or controller you need to remove the casing screws using either a tri-wing (Y0 \u0026amp; Y00) or cross-wing (#00) screwdriver from this set.\u003cbr\u003e\u003cbr\u003eAlso included is a double ended prying tool, ideal as an aid when opening housing shells or prying off a screen lens.\u003cbr\u003e\u003cbr\u003eNo need to send your console or accessory to a service centre for repair, these screwdrivers allow you to open it to complete your own repair.\u003cbr\u003e\u003cbr\u003ePlease note that opening your device will in most cases void your warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eScrewdriver \u003cstrong\u003ecompatibility\u003c\/strong\u003e list:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eNintendo DS Lite\u003cbr\u003eNintendo DSi\u003cbr\u003eNintendo DSi XL\u003cbr\u003eNintendo Game boy\u003cbr\u003eNintendo Game boy pocket\u003cbr\u003eNintendo Game boy colour\u003cbr\u003eNintendo Game boy advance\u003cbr\u003eNintendo Game boy advance sp\u003cbr\u003eNintendo Wii \u003cbr\u003eNintendo Wii U\u003cbr\u003eNintendo Switch\u003cbr\u003eNintendo game boy advance game cartridges\u003cbr\u003eNintendo GameCube controller\u003cbr\u003eNintendo Wii controller\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"\" data-zl-file=\"ZL-TF-TOOL-S00-018\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e- Metal tip can injure if the tool slips – use the right size and keep hands clear of the tip.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":28842081157,"sku":"400068","price":5.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/44sm31ugpsx.jpg?v=1793969199"},{"product_id":"zedlabz-replacement-volume-wheel-potentiometer-for-nintendo-gameboy-advance-gba-color-gbc","title":"ZedLabz replacement volume wheel potentiometer for Nintendo Gameboy Advance GBA \u0026 Color GBC","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Replacement volume wheel control for Nintendo Game Boy Advance \u0026amp; Color\u003cbr\u003e- Turns from left to right to increase or decrease volume\u003cbr\u003e- Repair sticking or faulty volume controls.\u003cbr\u003e- 16mm diameter \u003cbr\u003e- Requires soldering to install\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe ZedLabz replacement volume control thumb wheel knob can fix stiff or faulty volume control wheels. \u003cbr\u003e\u003cbr\u003eCompatible with Nintendo Game Boy Advance and Game Boy Color.\u003cbr\u003e\u003cbr\u003eRequires technical fitting to install, soldering required for this part.\u003cbr\u003e\u003cbr\u003e Please consult an expert for a diagnosis of the fault with you Game Boy if you are unsure about the fault with your console.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,HOT,VENT,GUIDE\" data-zl-file=\"ZL-TF-SWITCH-S00-006\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":28844403269,"sku":"400298","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/czaxnpz3e4f.jpg?v=1793967462"},{"product_id":"zedlabz-3-8-4-5mm-gamebit-security-tool-bit-for-games-consoles-nes-snes-n64-gc-game-boy","title":"Gamebit security screwdriver for games \u0026 consoles NES SNES N64 Gameboy tool bit 3.8 \u0026 4.5 | ZedLabz","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Security screwdriver bit for opening various older games consoles \u0026amp; game cartridges.\u003cbr\u003e- Includes 3.8 \u0026amp; 4.5mm female bits to remove tamper resistant screws.\u003cbr\u003e- Allows various games consoles \u0026amp; cartridges to be opened for cleaning, repair or modification.\u003cbr\u003e- Compatible with retro devices such as SNES, N64, GameCube, Game boy, Master System \u0026amp; Megadrive.\u003cbr\u003e- Screwdriver bits fit standard hex driver (not included).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eRepair or modify your own gamesconsoles and cartridges with the ZedLabz security screwdriver bit set\u003cstrong\u003e.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eSimply insert the bits into a standard hex driver \/ screwdriver handle (not included) and you can begin to clean, repair and mod your own retro systems and games by removing the security screws. \u003cbr\u003e\u003cbr\u003eOnce the casing is opened you can complete various maintenance and repair tasks such as cleaning, replacing batteries, recapping motherboards and more.\u003cbr\u003e\u003cbr\u003ePlease note that opening your device will in most cases void your warranty (which has most likely expired long ago).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eScrewdriver bit compatibility list:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eConsoles \u0026amp; accessories:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eNintendo Snes console\u003cbr\u003eNintendo N64 console\u003cbr\u003eNintendo N64 rumble pak\u003cbr\u003eNintendo GameCube console\u003cbr\u003eNintendo Super Gameboy\u003cbr\u003eSega Megadrive (Genesis)\u003cbr\u003eSega Mastersystem\u003cbr\u003eSega 32X\u003cbr\u003eSega Gamegear\u003cbr\u003eSega Nomad\u003cbr\u003eTurbografx 16\u003cbr\u003eTurbo Duo\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCartridge Games:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eNintendo NES\u003cbr\u003eNintendo SNES\u003cbr\u003eNintendo N64\u003cbr\u003eNintendo Game boy\u003cbr\u003eNintendo Game boy color\u003cbr\u003eNintendo Virtual Boy\u003cbr\u003eSega Mastersystem\u003cbr\u003eSega Megadrive\u003cbr\u003eSega Gamegear\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAdditional information:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe technical name for Gamebit security screwdrivers is line head, this type of Japanese screw became synonymous with gaming, hence the nickname Gamebit was born to describe this type of security fastener screw which was commonly used by in older games consoles.\u003cbr\u003e\u003cbr\u003eThese are sometimes called as reverse torx \/ hexalobe, they are similar in style with the primary difference being that torx drivers are male whereas game bit drivers are female, hence the reverse of torx.\u003cbr\u003e\u003cbr\u003eThey fall under the broader banner of tamper resistant screws or security screws and were used to deter people from opening devices for various reasons, such as to stop you from repairing the device yourself, or to protect the technology inside and try to prevent piracy.\u003cbr\u003e\u003cbr\u003eThe sizing commonly associated with gamebit, 3.8mm and 4.5mm are technically wrong but widely associated and accepted to describe size of tool required to remove the security screws from retro devices, the correct sizes are actually 3.6mm and 4.6mm from a technical specification standpoint.\u003cbr\u003e\u003cbr\u003eOne of the most popular uses of these tools is to access and replace CR2016, CR2025 and CR2032 coin batteries in old game cartridges.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR\" data-zl-file=\"ZL-TF-TOOL-S00-018\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Metal tip can injure if the tool slips – use the right size and keep hands clear of the tip.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":28963664517,"sku":"500259","price":3.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/r0ntyoa4l4d.jpg?v=1793962248"},{"product_id":"zedlabz-replacement-internal-speaker-for-nintendo-game-boy-color-gbc-black","title":"ZedLabz replacement internal speaker for Nintendo Game Boy Color \u0026 Advance GBC GBA [AGB CGB] - black","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Replacement speaker for Nintendo Game Boy Color \u0026amp; Advance consoles.\u003cbr\u003e- Can repair distorted sound or issues relating to having no sound output.\u003cbr\u003e- 8 Ohm 0.5W speaker with 2.3cm diameter (approximate).\u003cbr\u003e- Requires internal fitting and soldering - console must be opened to replace speakers.\u003cbr\u003e- Verified compatible with Game Boy Color \u0026amp; Advance, may fit other models, please check specification.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eReplace your blown or distorted internal speakers with this new compatible replacement for Nintendo Game Boy Color (GBC) \u0026amp; Advance (GBA)\u003cbr\u003e\u003cbr\u003e Requires internal fitting and soldering - Console must be opened and soldering experience is required to install.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,HOT,VENT,GUIDE\" data-zl-file=\"ZL-TF-ELEC-SPEAKER-S00-002\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Contains magnets – if swallowed, get medical help immediately.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":5340881485865,"sku":"500755","price":2.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/zedlabz-replacement-internal-speaker-for-nintendo-game-boy-color-advance-gbc-gba-blackzedlabz-449983.jpg?v=1741480630"},{"product_id":"zedlabz-replacement-internal-higher-power-1w-speaker-for-nintendo-game-boy-color-advance-gbc-gba-black","title":"ZedLabz replacement internal higher power 1W speaker for Nintendo Game Boy Color \u0026 Advance GBC GBA - black","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Replacement higher power speaker for Nintendo Game Boy Color \u0026amp; Advance consoles.\u003cbr\u003e- Can repair distorted sound or issues relating to having no sound output.\u003cbr\u003e- 8 Ohm 1W speaker with 2.3cm diameter (approximate).\u003cbr\u003e- Requires internal fitting and soldering - console must be opened to replace speakers.\u003cbr\u003e- Verified compatible with Game Boy Color \u0026amp; Advance, may fit other models, please check specification.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eReplace your blown or distorted internal speakers with this new higher powered 1W replacement for Nintendo Game Boy Color (GBC) \u0026amp; Advance (GBA).\u003cbr\u003e\u003cbr\u003eThe larger wattage speaker provides a louder maximum volume for the Game Boy Advance and is ideal for use with amp mods like GBAMP.\u003cbr\u003e\u003cbr\u003e Requires internal fitting and soldering - Console must be opened and soldering experience is required to install.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,HOT,VENT,GUIDE\" data-zl-file=\"ZL-TF-ELEC-SPEAKER-S00-002\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Contains magnets – if swallowed, get medical help immediately.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":5353595404329,"sku":"500757","price":3.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/zedlabz-replacement-internal-higher-power-1w-speaker-for-nintendo-game-boy-color-advance-gbc-gba-blackzedlabz-446150.jpg?v=1741480627"},{"product_id":"screen-lens-electronics-spudger-prying-blade-thin-metal-opening-tool-with-silicone-grip-handle-zedlabz","title":"Screen lens \u0026 electronics spudger prying blade thin metal opening tool with silicone grip handle | ZedLabz","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Metal flat bar for opening electronic devices and removing screens.\u003cbr\u003e- Ultra thin metal edge fits into the tightest gaps.\u003cbr\u003e- Blunt edge making it safer than using knife blades. \u003cbr\u003e- Silicone handle provides grip whilst prying open devices.\u003cbr\u003e- 120cm total length\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eRepair or modify electronic devices with this ultra thin prying bar which fits into the smallest seals and edges to jimmy them open.\u003cbr\u003e\u003cbr\u003eChange a screen lens on a handheld game device, open a tablet computer, or gain access to the insides of a smart phone, the ultra thin edge is flexible and easily slides into near invisble gaps in devices.\u003cbr\u003e \u003cbr\u003eUse it make your own repairs, change your own batteries or fit mods. \u003cbr\u003e\u003cbr\u003eThe prying tool features a silicone handle which provides both comfort and grip of the blade whilst you are carefully working the tool around the edges to remove the panel, glass or cover.\u003cbr\u003e\u003cbr\u003ePlease note that opening your device will in most cases void your warranty.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SHARP\" data-zl-file=\"ZL-TF-TOOL-S00-022\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e- Sharp points or edges – handle and store with care.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":12671889539174,"sku":"500904","price":3.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/pabgimxjxcr_35441f1e-099c-4c81-ac8b-eaa0630ee84f.gif?v=1793961366"},{"product_id":"precision-esd-safe-tweezer-set-of-3-pointed-curved-blunt-for-electronics-games-consoles-handhelds-controllers-repairs-or-mods-anti-static-zedlabz","title":"Precision ESD safe tweezer set of 3 (pointed, curved \u0026 blunt) for electronics, games consoles, handhelds \u0026 controllers repairs or mods - anti static | ZedLabz","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Precision tweezer set for electronic repairs and modding.\u003cbr\u003e- Ideal for pulling, holding \u0026amp; picking anything from wires to screws or components.\u003cbr\u003e- Includes fine pointed, curved pointed and blunt tweezers.\u003cbr\u003e- ESD coated to protect against static damage.\u003cbr\u003e- Length 13cm approximate.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eRepair or modify your electronic devices with ease using these precise electronic tweezers. \u003cbr\u003e\u003cbr\u003eEach set includes a fine pointed, fine curved and blunt ended tweezer to handle any job such as pulling, placing, holding or picking.\u003cbr\u003e\u003cbr\u003eThey are ideal for working on handheld game consoles, home consoles and controller pads when modding or completing repairs. \u003cbr\u003e\u003cbr\u003eEach of the three types of tweezer are ESD coated to prevent static charge, making them ideal for electronics. \u003cbr\u003e\u003cbr\u003eThe tweezers are non magnetic and resistant to many chemicals including most acids.\u003cbr\u003e\u003cbr\u003eThe set comes complete with pouch that keeps the set together and provides safe storage of the tweezer tips.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SHARP\" data-zl-file=\"ZL-TF-TOOL-S00-023\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e- Sharp points or edges – handle and store with care.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":27963373584486,"sku":"600926","price":7.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/precision-esd-safe-tweezer-set-of-3-pointed-curved-blunt-for-electronics-games-consoles-handhelds-controllers-repairs-or-mods-anti-static-zedlabzzedlabz-781514.jpg?v=1741480064"},{"product_id":"2-in-1-plastic-prying-opening-tool-for-game-controllers-consoles-handheld-electronic-devices-4-pack-zedlabz","title":"2 in 1 plastic prying opening tool for Game controllers, consoles \u0026 handheld electronic devices - 4 pack | ZedLabz","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Four pack of plastic prying tool for modding \u0026amp; repairs\u003cbr\u003e- Features two different tips for various opening, wedging, levering \u0026amp; lifting task\u003cbr\u003e- Hook tip end can be used for tasks such as lifting connectors \u0026amp; wires.\u003cbr\u003e- Wedge tip end aids in prying open casings \/ housing shells.\u003cbr\u003e- Durable plastic material that does not damage the device.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eNever use metal tools against plastic as a general rule, instead use these tough plastic opening tools to get inside your device without marking and damaging the outer casing.\u003cbr\u003e\u003cbr\u003eTo make your own repairs or fit mods you will need to open your games devices, these ergonomically designed opening tools aid in the opening of the housings \/ casings and help to avoid damaging them, plus once you are inside the tools are also useful for releasing small cables and connectors. \u003cbr\u003e\u003cbr\u003eThey help to release tabs \/ clips and pry the joining areas of housing shells to open them, without the damage that a metal tool causes.\u003cbr\u003e\u003cbr\u003eUse multiple pry tools as wedges to keep one side of a device open whilst you release other sides.\u003cbr\u003e\u003cbr\u003eThe prying tool plastic material is tough enough for the task but soft enough to break before your device is damaged or marked.\u003cbr\u003e\u003cbr\u003eDepending on the specific applications the tools can usually be used multiple times but they will wear with use and are a consumable tool.\u003cbr\u003e\u003cbr\u003eCompatible with most electronic devices including Game controllers, held-held games consoles and home game consoles.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"\" data-zl-file=\"ZL-TF-TOOL-S00-017\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":27965495607398,"sku":"600927","price":3.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/nw5rdimkh1g.gif?v=1703076687"},{"product_id":"replacement-internal-speaker-for-game-boy-advance-nintendo-left-and-right-set-black-zedlabz","title":"Replacement internal speaker for Game Boy Advance Nintendo left and right set - Black | ZedLabz","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Replacement internal speaker set for Game Boy Advance\u003cbr\u003e- Can repair distorted sound or issues relating to having no sound.\u003cbr\u003e- Require internal fitting - Console must be opened to replace speakers.\u003cbr\u003e- Plug and play install - no soldering required.\u003cbr\u003e- 2 Year warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eReplace your blown or faulty internal speakers with this brand new replacement set. \u003cbr\u003e\u003cbr\u003e Require internal fitting - plug and play installation once gamepad opened.\u003cbr\u003e\u003cbr\u003eOpening the Gamepad will void your warranty.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,HOT,VENT,GUIDE\" data-zl-file=\"ZL-TF-ELEC-SPEAKER-S01-001\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Contains magnets – if swallowed, get medical help immediately.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":29473860681830,"sku":"500690","price":4.77,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/replacement-internal-speaker-for-game-boy-advance-nintendo-left-and-right-set-black-zedlabzzedlabz-719351.jpg?v=1741479963"},{"product_id":"double-sided-tape-adhesive-strips-to-install-screen-lens-or-touch-screen-20-pack-zedlabz","title":"Double sided tape adhesive strips to install screen lens or touch screen - 20 pack | ZedLabz","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Foam double sided adhesive pad\u003cbr\u003e- Easy peal backing paper \u003cbr\u003e- For mounting the touch screen onto the LCD screen\u003cbr\u003e- Touch screen and lcd NOT included\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eA replacement adhesive mount is often needed when replacing the Touch Screen and or LCD but it is rarely supplied. \u003cbr\u003e\u003cbr\u003e The adhesive joins the LCD and touch screen parts together, this pack includes 2 adhesive boarders specifically made for this purpose. \u003cbr\u003e\u003cbr\u003e Touch screen and lcd NOT included.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,GUIDE\" data-zl-file=\"ZL-TF-CONSUMABLE-S00-007\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":31194478674022,"sku":"600982","price":2.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/double-sided-tape-adhesive-strips-to-install-screen-lens-or-touch-screen-20-pack-zedlabzzedlabz-9588959.png?v=1794007626"},{"product_id":"plastic-prying-opening-spudgers-for-game-controllers-consoles-handheld-electronic-devices-3-pack-zedlabz","title":"Plastic prying opening Spudgers for Game controllers, consoles \u0026 handheld electronic devices - 3 pack | ZedLabz","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Three pack of plastic prying spudgers for modding \u0026amp; repairs\u003cbr\u003e- Features various different tips for various opening, wedging, levering \u0026amp; lifting task\u003cbr\u003e- Halberd spudger can be used for tasks such as lifting connectors \u0026amp; wires.\u003cbr\u003e- Wedge tip end aids in prying open casings \/ housing shells.\u003cbr\u003e- Durable plastic material that does not damage the device.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eNever use metal tools against plastic as a general rule, instead use these tough plastic opening tools to get inside your device without marking and damaging the outer casing.\u003cbr\u003e\u003cbr\u003eTo make your own repairs or fit mods you will need to open your games devices, these ergonomically designed opening tools aid in the opening of the housings \/ casings and help to avoid damaging them, plus once you are inside the tools are also useful for releasing small cables and connectors. \u003cbr\u003e\u003cbr\u003eThey help to release tabs \/ clips and pry the joining areas of housing shells to open them, without the damage that a metal tool causes.\u003cbr\u003e\u003cbr\u003eUse multiple pry tools as wedges to keep one side of a device open whilst you release other sides.\u003cbr\u003e\u003cbr\u003eThe prying tool plastic material is tough enough for the task but soft enough to break before your device is damaged or marked.\u003cbr\u003e\u003cbr\u003eDepending on the specific applications the tools can usually be used multiple times but they will wear with use and are a consumable tool.\u003cbr\u003e\u003cbr\u003eCompatible with most electronic devices including Game controllers, held-held games consoles and home game consoles.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"\" data-zl-file=\"ZL-TF-TOOL-S00-017\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":32100834181222,"sku":"800421","price":4.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/plastic-prying-opening-spudgers-for-game-controllers-consoles-handheld-electronic-devices-3-pack-zedlabzzedlabz-514269.jpg?v=1741476630"},{"product_id":"solder-0-38mm-super-thin-lead-free-fine-wire-with-flux-core-for-game-console-repairs-projects-modz-2m-zedlabz","title":"Solder 0.38mm super thin lead free Sc100e fine wire with flux core for game console repairs, projects \u0026 modz - Made in UK - 2M | ZedLabz","description":"\u003cp\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- UK made solder wire with flux core\u003cbr\u003e- Fine 0.38mm diameter is ideal for repair work.\u003cbr\u003e- Easy flowing - Can be used without flux.\u003cbr\u003e- 2 meters of solder wire per pack.\u003cbr\u003e- Lead free low odour Sc100e wire - RoHS compliant.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eOur UK made lead free 0.38mm flux core solder is an easy to use soldering wire ideal for console repairs and modding projects.\u003cbr\u003e\u003cbr\u003eThis smaller 2 meter pack is ideal for one off repairs and hobbyists not wanting to invest lots of money in a industry sized 200g roll.\u003cbr\u003e\u003cbr\u003eThe fine grade is useful for repair work, rework and for installing thin hook-up wire, as a larger diameter solder may create a joint which is too large, particularly where residual solder may exist, \u003cbr\u003e\u003cbr\u003eUse it when installing hookup wires on handhelds such as Game boy, or changing the analog sticks on controllers such as PS4, this solder is suitable for a variety of applications including SMD, though hole and fast drag soldering, \u003cbr\u003e\u003cbr\u003eFlowing the solder is easy thanks to the high quality alloy with flux core, separate flux can also be used if desired but it is generally not needed.\u003cbr\u003e\u003cbr\u003eThis lead free version is particularly good for first time users \/ hobbyists as it has minimal odour and gives off non-offensive fumes, making it safer and usable without an extractor (soldering should be done in a well ventilated room)\u003cbr\u003e\u003cbr\u003eMelting point 227ºC, advised iron tip temperature 360ºC - 380ºC (120ºC - 160ºC above solder melting point).\u003c\/div\u003e\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"KOR,HOT,VENT,GUIDE\" data-zl-file=\"ZL-TF-CONSUMABLE-S99-005\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Chemical product – read the hazard label on the pack before use.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":32113534140518,"sku":"800452","price":3.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/products\/solder-038mm-super-thin-lead-free-sc100e-fine-wire-with-flux-core-for-game-console-repairs-projects-modz-made-in-uk-2m-zedlabzzedlabz-482297.jpg?v=1741476503"},{"product_id":"suction-cup-tool-for-screen-lens-nintendo-game-boy-consoles-retro-modding-disassemble-tool-zedlabz","title":"Suction cup tool for screen lens Nintendo Game Boy consoles modding disassemble tool | ZedLabz","description":"\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Suction cup for screen lens removal.\u003cbr\u003e- Diameter 4cm to 4.5cm once suctioned to surface.\u003cbr\u003e- Features metal pull ring and durable mechanism.\u003cbr\u003e- Ideal for refurbishing and modding games consoles.\u003cbr\u003e- Compatible with various devices with removal screen lens covers.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eRemove your handheld console screen lens without damaging the housing with this suction cup tool. \u003cbr\u003e\u003cbr\u003eSimply press down onto the original screen to aid in the lifting and removal of the old screen lens.\u003cbr\u003e\u003cbr\u003eCompatible with various devices including Nintendo Game Boy console series.\u003cbr\u003e\u003cbr\u003eDisassemble of your device will void warranty and is done at owners risk.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"\" data-zl-file=\"ZL-TF-TOOL-S00-024\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":32127963201638,"sku":"800429","price":7.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/suction-cup-tool-for-screen-lens-nintendo-game-boy-consoles-modding-disassemble-tool-zedlabzzedlabz-580317.jpg?v=1741476501"},{"product_id":"rework-gel-repair-tool-for-repairs-mods-with-manual-syringe-guidance-tip-10-grams-zedlabz","title":"Flux paste gel rework repair tool for repairs \u0026 mods with manual syringe \u0026 guidance tip - 10 grams | SolderKing","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Rework gel repair tool.\u003cbr\u003e- Suitable for leaded \u0026amp; lead free solders\u003cbr\u003e- Including syringe and guidance tip. \u003cbr\u003e- Halogen free, ROHS \u0026amp; Reach compliant\u003cbr\u003e- Made in the UK. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis tacky gel is just what you need when repairing or modding your games console or controller. \u003cbr\u003e\u003cbr\u003eHalogen free rework gel with syringe and guidance tip.\u003cbr\u003e\u003cbr\u003eDisassembly of a controller or console will void warranty and is done at owners risk. Please seek professional advice if unsure. \u003cbr\u003e\u003cbr\u003eIt is recommended to wear protective gloves when using this product.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"KOR,HOT,VENT,GUIDE\" data-zl-file=\"ZL-IF-SOLDERKING\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Chemical product – read the hazard label on the pack before use.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: SolderKing · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"SolderKing","offers":[{"title":"Default Title","offer_id":37793141784747,"sku":"800449","price":14.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/lcv01m0bpvz.jpg?v=1793989389"},{"product_id":"internal-speaker-for-nintendo-game-boy-advance-agb-001-console-funnyplaying","title":"Internal Speaker for Nintendo Game Boy Advance AGB-001 console | Funnyplaying","description":"\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Speaker for Game Boy Advance.  \u003cbr\u003e- Official Funnyplaying product.\u003cbr\u003e- Model number: AGB-001.\u003cbr\u003e- 0.3W to 0.6W\u003cbr\u003e- Compatible with Nintendo Game Boy Advance console.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eReplacement AGB-01 speaker for Nintendo Game Boy Advance handheld console. \u003cbr\u003e\u003cbr\u003eOfficial Funnyplaying product - Stronger magnetic force and thinner diaphragm providing greater sound.\u003cbr\u003e\u003cbr\u003eConsole will need to be disassembled to install, this will void any warranty and is done at owners risk. Please seek professional assistance if unsure. \u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,HOT,VENT,GUIDE\" data-zl-file=\"ZL-IF-FUNNYPLAYING-OTHER\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Contains magnets – if swallowed, get medical help immediately.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: FunnyPlaying · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Funnyplaying","offers":[{"title":"Default Title","offer_id":38159710978219,"sku":"900130","price":4.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/ymlg1m13m00.png?v=1793993861"},{"product_id":"2w-speaker-mod-for-nintendo-game-boy-advance-color-pocket-gbc-gba-gbp-internal-higher-power-upgrade-black-zedlabz","title":"2W speaker mod for Nintendo Game Boy Advance, Color, Pocket GBC GBA GBP internal higher power upgrade - black | ZedLabz","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Replacement higher power speaker for Nintendo Game Boy Color \u0026amp; Advance consoles.\u003cbr\u003e- Can repair distorted sound or issues relating to having no sound output.\u003cbr\u003e- 2W 8ohm speaker with 2.3cm diameter (approximate).\u003cbr\u003e- Requires internal fitting and soldering - console must be opened to replace speakers.\u003cbr\u003e- Verified compatible with Game Boy Color \u0026amp; Advance, may fit other models, please check specification.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eReplace your blown or distorted internal speakers with this new higher powered 2W replacement for Nintendo Game Boy Color (GBC) \u0026amp; Advance (GBA).\u003cbr\u003e\u003cbr\u003eThe larger wattage speaker provides a louder maximum volume for the Game Boy Advance and is ideal for use with amp mods like the flex amp from Helder game tech.\u003cbr\u003e\u003cbr\u003e Requires internal fitting and soldering - Console must be opened and soldering experience is required to install.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,HOT,VENT,GUIDE\" data-zl-file=\"ZL-TF-ELEC-SPEAKER-S00-002\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Contains magnets – if swallowed, get medical help immediately.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":39879862616235,"sku":"900496","price":3.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/3qkdtafn1td.jpg?v=1793995642"},{"product_id":"digital-multimeter-portable-backlight-lcd-tester-zedlabz","title":"Digital multimeter portable backlight LCD tester | ZedLabz","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Multipurpose entry level digital multimeter tester\u003cbr\u003e- Tests A\/C \u0026amp; DC Voltage, diode, transistor\u003cbr\u003e- LED backlight display \u0026amp; low battery warning\u003cbr\u003e- Built in stand, protective bumper sleeve\u003cbr\u003e- Requires 9V battery - Not included\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis multi purpose multimeter tester is the ideal companion for anyone doing repairs or mods on gaming devices.\u003cbr\u003e\u003cbr\u003eThe tester covers all of the basics that would be needed to identify where a fault is or test work that has been completed.\u003cbr\u003e\u003cbr\u003eMost basic mods and repairs require a meter to confirm the voltage, continuity, and ohms, this meter will do all of these things and much more.\u003cbr\u003e\u003cbr\u003eRepair common issues yourself such as:\u003cbr\u003e\u003cbr\u003eCheck a fuse - a blow fuse will stop things working, check the continuity, the meter will beep if the fuse is good.\u003cbr\u003e\u003cbr\u003ePower issues - Voltage checking is power issue repairs 101 (along with checking fuses), you can that your getting a steady voltage using the V side of the meters dial, test if a battery has a good charge or need recharging (if rechargable), check if a power board is providing steady voltage from the battery, being able to read the voltage at different parts of the electronic device is vital to pinpointing what might be causing an issue.\u003cbr\u003e\u003cbr\u003eAids Wiring of mods - Test for continuity (beep test) between two points on a board to find wiring options for mods, identify where parts of the circuit are connected to so that you can add your mod wiring.\u003cbr\u003e\u003cbr\u003eTest a speaker - Test if a speaker is good by measuring the ohms against the original expected ohms for the speaker, if its too low to the original spec then you know its time for a new speaker.\u003cbr\u003e\u003cbr\u003eRequires a 9V battery, not included.\u003cbr\u003e\u003cbr\u003e\u003cdiv\u003e\u003c\/div\u003e\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SHARP,MAINS\" data-zl-file=\"ZL-TF-TOOL-S00-010\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e- Shock risk – do not exceed the rated voltage or category.\u003cbr\u003e- Batteries not included – fit the correct type the right way round.\u003cbr\u003e- Glass – sharp if broken; handle with care.\u003cbr\u003e- Sharp points or edges – handle and store with care.\u003cbr\u003e- Low voltage only – never use on live or high-voltage circuits.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":43029620949244,"sku":"100803","price":12.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/xkfmoprb4w1.jpg?v=1793997646"},{"product_id":"leaded-solder-0-38mm-60-40-sn60pb40-fine-wire-with-flux-core-for-game-console-repairs-projects-modz-made-in-uk-250g-roll-zedlabz","title":"Leaded Solder 0.38mm 60\/40 Sn60Pb40 fine wire with flux core for game console repairs, projects \u0026 modz - Made in UK - 250g roll | Solder King","description":"\u003cp\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- UK made leaded solder wire with flux core\u003cbr\u003e- Fine 0.38mm diameter is ideal for repair work.\u003cbr\u003e- Easy flowing - Can be used without flux.\u003cbr\u003e- Full 250g roll\u003cbr\u003e- Sn60Pb40 60 \/ 40 - RoHS compliant.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eOur UK made leaded 0.38mm flux core solder is an easy to use soldering wire ideal for console repairs and modding projects.\u003cbr\u003e\u003cbr\u003eThe leaded version is preferred by some as it can be slightly easier to work with then lead free (primarily due to a lower melting temperature), however ventilation should be considered more when working with a product containing lead.\u003cbr\u003e\u003cbr\u003eWe also offer this in smaller 2M lengths for those who do not require a full roll.\u003cbr\u003e\u003cbr\u003eThe fine grade is useful for repair work, rework and for installing thin hook-up wire, as a larger diameter solder may create a joint which is too large, particularly where residual solder may exist, \u003cbr\u003e\u003cbr\u003eUse it when installing hookup wires on handhelds such as Game boy, or changing the analog sticks on controllers such as PS4, this solder is suitable for a variety of applications including SMD, though hole and fast drag soldering, \u003cbr\u003e\u003cbr\u003eFlowing the solder is easy thanks to the high quality alloy with flux core, separate flux can also be used if desired but it is generally not needed.\u003cbr\u003e\u003cbr\u003eThis lead free version is particularly good for first time users \/ hobbyists as it has minimal odour and gives off non-offensive fumes, making it safer and usable without an extractor (soldering should be done in a well ventilated room)\u003cbr\u003e\u003cbr\u003eMelting point 188ºC, advised iron tip temperature 308ºC - 348ºC (120ºC - 160ºC above solder melting point).\u003c\/div\u003e\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"KOR,HOT,VENT,GUIDE\" data-zl-file=\"ZL-IF-SOLDERKING\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Chemical product – read the hazard label on the pack before use.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: SolderKing · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Solder King","offers":[{"title":"Default Title","offer_id":43231158108412,"sku":"100560","price":44.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/leaded-solder-038mm-6040-sn60pb40-fine-wire-with-flux-core-for-game-console-repairs-projects-modz-made-in-uk-250g-roll-zedlabz100560zedlabz-182711.jpg?v=1741475701"},{"product_id":"solder-wire-0-38mm-lead-free-with-flux-core-for-game-console-repairs-projects-modz-250g-roll-zedlabz","title":"Lead free solder wire 0.38mm Sc100e with flux core for game console repairs, projects \u0026 modz - Made in UK - 250g roll | Solder King","description":"\u003cp\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- UK made solder wire with flux core\u003cbr\u003e- Fine 0.38mm diameter is ideal for repair work.\u003cbr\u003e- Easy flowing - Can be used without flux.\u003cbr\u003e- Full 250g roll\u003cbr\u003e- Lead free low odour Sc100e wire - RoHS compliant.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eOur UK made lead free 0.38mm flux core solder is an easy to use soldering wire ideal for console repairs and modding projects.\u003cbr\u003e\u003cbr\u003eWe also offer this in smaller 2M lengths for those who do not require a full roll.\u003cbr\u003e\u003cbr\u003eThe fine grade is useful for repair work, rework and for installing thin hook-up wire, as a larger diameter solder may create a joint which is too large, particularly where residual solder may exist, \u003cbr\u003e\u003cbr\u003eUse it when installing hookup wires on handhelds such as Game boy, or changing the analog sticks on controllers such as PS4, this solder is suitable for a variety of applications including SMD, though hole and fast drag soldering, \u003cbr\u003e\u003cbr\u003eFlowing the solder is easy thanks to the high quality alloy with flux core, separate flux can also be used if desired but it is generally not needed.\u003cbr\u003e\u003cbr\u003eThis lead free version is particularly good for first time users \/ hobbyists as it has minimal odour and gives off non-offensive fumes, making it safer and usable without an extractor (soldering should be done in a well ventilated room)\u003cbr\u003e\u003cbr\u003eMelting point 227ºC, advised iron tip temperature 360ºC - 380ºC (120ºC - 160ºC above solder melting point).\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"KOR,HOT,VENT,GUIDE\" data-zl-file=\"ZL-IF-SOLDERKING\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Chemical product – read the hazard label on the pack before use.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: SolderKing · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Solder King","offers":[{"title":"Default Title","offer_id":43231180587260,"sku":"100561","price":44.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/products\/lead-free-solder-wire-038mm-sc100e-with-flux-core-for-game-console-repairs-projects-modz-made-in-uk-250g-roll-zedlabz100561zedlabz-762939.jpg?v=1741475701"},{"product_id":"hookup-wire-28awg-5-colour-modding-kit-including-heat-shrink-tubing-kapton-tape-zedlabz","title":"Hookup wire 28AWG (5 colour) modding kit including heat shrink tubing \u0026 kapton tape | ZedLabz","description":"\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Hookup wire kit ideal for modding projects.\u003cbr\u003e- Two 50mm length pieces of heatshrink tubing. \u003cbr\u003e- Two 50MM length pieces of Kapton tape\u003cbr\u003e- Five 600MM length hookwire in assorted colours.\u003cbr\u003e- 28AWG wire thickness , approximately 0.8mm thickness (stripped)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eGrab this hookup kit with all the essentials for any gaming console modding project.\u003cbr\u003e\u003cbr\u003eThis kit is the ideal set of wires and essentials for installing a Raspberry Pico (Picoboot) inside a GameCube or any number of modding projects.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWarning: Soldering is required to install a Pico - Soldering Difficulty level medium, \u003c\/strong\u003esoldering experience is required, this install involves soldering to legs of an IC chip on the motherboard which are quite small, particularly for the less experienced in soldering. It is recommended you seek a professional installer if you are not used to soldering small pins. A good quality temperature controlled soldering iron and flux is advised. Incorrect installation couild result in things such as solder bridging pins on the IC chip, bad soldering may damage the motherboard once turned on, installation of a Pico into a Gamecube is done at the installers own risk. \u003cbr\u003e\u003cbr\u003eIncluded are 5 600mm length 28AWG hookup wires in 5 colours, ideal for colour coding and keeping track of your wire routing.\u003cbr\u003e\u003cbr\u003eAlso included is two 50mm length pieces of heatshrink which can be cut down into smaller pieces as needed, great for keeping wires neat, covering exposed wire or protecting wire from sharp areas.\u003cbr\u003e\u003cbr\u003eTwo 50mm length pieces of kaptop tape are helpful for insulating solder points or PCB boards as required.\u003cbr\u003e\u003cbr\u003eWhen installing a Pico into the GameCube you will need to remove the heatsink, in doing so the thermal pads might become damaged, or they might simply be warn and in need of replacement, we offer thermal pads specifically for the GameCube in store, it is recommended that you purchase new thermal pads when fitting a pico.\u003cbr\u003e\u003cbr\u003eIf repairing or modding of a games console usually requires the disassembling of the console and is a DIY undertaking, it will void any warranty and is done at owners risk.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,HOT,VENT,GUIDE\" data-zl-file=\"ZL-TF-CONSUMABLE-S00-012\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":43327085314300,"sku":"100732","price":3.96,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/hookup-wire-28awg-5-colour-modding-kit-including-heat-shrink-tubing-kapton-tape-zedlabz100732zedlabz-795416.jpg?v=1741475690"},{"product_id":"universal-magnetic-pcb-component-holder-fixture-helping-hand-for-soldering-repairs-projects-100-x-140mm-zedlabz","title":"Universal magnetic pcb component holder fixture helping hand for soldering repairs \/ projects 100 x 140mm | ZedLabz","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Universal small PCB holder with magnetic fixtures\u003cbr\u003e- Aluminium plate size 100 x 140mm\u003cbr\u003e- Includes 6 magnetic pins\u003cbr\u003e- Two holes provide the option to fix down to a bench\u003cbr\u003e- Ideal for electronics repairs and modding\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eHolding or positioning a PCB to solder for a repair or wiring can be a challenge, you can never have enough hands, but it does not have to be so difficult, you just need the right tools for the job.\u003cbr\u003e\u003cbr\u003eThis simple magnetic universal holder makes it easier to do various soldering and repair work by holding the PCB steady and suspended in the air for better access.\u003cbr\u003e\u003cbr\u003eSimply wedge the PCB between the provided magnets to instantly hold the PCB, the holder will generally except a board up to 100 x 140 mm however overhanging of a longer board is possible, providing you can still get to the plate to attach magnets around two sides.\u003cbr\u003e\u003cbr\u003eSix magnets are included, all parts are anodised for durability and safe with head such as soldering. Four foam feet are attached to the base of the black plate to protect other surfaces and make it easier to pickup.\u003cbr\u003e\u003cbr\u003ePico PCB mounted in the image is for illustration purposes only, not included.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,HOT,VENT,GUIDE\" data-zl-file=\"ZL-TF-TOOL-S00-008\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Contains magnets – if swallowed, get medical help immediately.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":43346466668796,"sku":"100723","price":14.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/universal-magnetic-pcb-component-holder-fixture-helping-hand-for-soldering-repairs-projects-100-x-140mm-zedlabz100723zedlabz-769019.jpg?v=1741475692"},{"product_id":"flex-amp-for-nintendo-game-boy-advance-with-volume-trim-gba-easy-install-flex-speaker-audio-amplifier-mod-retro-robot","title":"Flex Amp for Nintendo Game Boy Advance with volume trim GBA easy install flex speaker audio amplifier mod | Retro Robot","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Easy install flex Amp for Game Boy Advance handhelds from Retro robot.\u003cbr\u003e- 2W speaker is recommended for this amp to ensure there is no distortion (not included)\u003cbr\u003e- Four solder points on ribbon mounts flex cable to the motherboard\u003cbr\u003e- Designed to reduce noise from IPS screen mods.\u003cbr\u003e- Unique trim feature allows you to set the max volume.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis is a flex amp from Retro Robot, which is easy install and with a unique trim feature.\u003cbr\u003e\u003cbr\u003eUnlike other amps which have no adjustment, this amp provides a variable volume pot labelled trim, which allows you to set the maximum volume to your own preference.\u003cbr\u003e\u003cbr\u003eThe capacitor configuration on this amp is designed to reduce audio hum from IPS and battery mods, and the amp is compatible with the power cleaner from Helder Game Tech.\u003cbr\u003e\u003cbr\u003eTo gain the most from this amp it is recommended that a 2W speaker is used, this will help to avoid distortion when the volume is set to maximum. The original speaker is compatible but may be a little distorted at the peak volume setting.\u003cbr\u003e\u003cbr\u003eRequires some technical fitting to install including soldering, the flex cable comes pre-populated, making installation much easier, no need to solder the tiny capacitors or other parts.\u003cbr\u003e\u003cbr\u003eInstall guide:\u003cbr\u003e\u003cbr\u003e1) Remove the old speaker and trim off the old solder connections so they are flat with a pair of side cutters.\u003cbr\u003e2) Pre-tin the GBA motherboard (see photo showing locations).\u003cbr\u003e3) Solder on the flex amp at the four locations (see photo).Liquid flux can be used to help neaten to joints and allow the solder to flow.\u003cbr\u003e4) Solder on the speaker.\u003cbr\u003e5) Using a small flat screwdriver, set the volume pot to the required peak level.\u003cbr\u003e6) The Helder Power Cleaner can be paired with this amp and is recommended to remove the residual audio hiss.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,HOT,VENT,GUIDE\" data-zl-file=\"ZL-IF-ROBOTRETRO\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Robot Retro · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Robot Retro","offers":[{"title":"Default Title","offer_id":43362627191036,"sku":"100724","price":9.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/ntmhghqs2gg.jpg?v=1793998401"},{"product_id":"plastic-prying-opening-tool-guitar-pick-for-game-controllers-consoles-handheld-electronic-devices-6-pack-zedlabz","title":"Plastic prying opening tool guitar pick for Game controllers, consoles \u0026 handheld electronic devices - 6 pack | ZedLabz","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Plastic prying pick tool for modding \u0026amp; repairs\u003cbr\u003e- Thin picks can be used for prying, wedging open \u0026amp; sliding\u003cbr\u003e- Three points are slightly be beveled to a thinner thickness for prying.\u003cbr\u003e- Made from plastic material so that it does not mark devices being repaired.\u003cbr\u003e- Includes six per pack.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eMetal tools should never be used against against plastic materials as a general rule, they will normally cause marks and other damage, plastic tools like these guitar pick style openers are the perfect choice for all types of prying, separating and wedging.\u003cbr\u003e\u003cbr\u003eUsing these picks you can pry open many different types of devices from controllers, to handhelds and home consoles, they can also be used for other devices such as laptops, mobile phones and more.\u003cbr\u003e\u003cbr\u003eUse multiple pry tools as wedges to keep one side of a device open whilst you release other sides.\u003cbr\u003e\u003cbr\u003eThey help to release tabs \/ clips and pry the joining areas of housing shells to open them, without the damage that a metal tool causes.\u003cbr\u003e\u003cbr\u003eThe prying tool plastic material is tough enough for the task but soft enough to break before your device is damaged or marked.\u003cbr\u003e\u003cbr\u003eDepending on the specific applications the tools can usually be used multiple times but they will wear with use and are a consumable tool.\u003cbr\u003e\u003cbr\u003eCompatible with most electronic devices including Game controllers, held-held games consoles and home game consoles.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR\" data-zl-file=\"ZL-TF-TOOL-S00-025\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":43578598555900,"sku":"200293","price":3.22,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/plastic-prying-opening-tool-guitar-pick-for-game-controllers-consoles-handheld-electronic-devices-6-pack-zedlabz200293zedlabz-484799.jpg?v=1741475642"},{"product_id":"mini-tri-wing-security-philips-cross-screwdriver-set-zedlabz","title":"Mini tri-wing security \u0026 philips cross screwdriver set | ZedLabz","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- basic mini screwdriver set for use with game controllers \u0026amp; handhelds\u003cbr\u003e- includes philips cross \u0026amp; tri-wing screwdriver\u003cbr\u003e- Suitable for opening controllers and handhelds\u003cbr\u003e- 8.5cm length with hexagon end.\u003cbr\u003e- Unfastens or fastens electronic screws\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThese basic mini screwdrivers are perfect for beginners and those working to a budget. \u003cbr\u003e\u003cbr\u003eThe scrwdrivers have a plastic handle and metal head,\u003cbr\u003e\u003cbr\u003e8.5CM total length with hexagon end on handle for use with spanner or socket.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"\" data-zl-file=\"ZL-TF-TOOL-S00-018\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e- Metal tip can injure if the tool slips – use the right size and keep hands clear of the tip.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":44031349915900,"sku":"100118","price":2.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/4h03ba3kkkg.jpg?v=1794000466"},{"product_id":"manual-desoldering-pump-hand-operated-press-button-spring-loaded-solder-sucker-zedlabz","title":"Manual desoldering pump hand operated press button spring loaded solder sucker | ZedLabz","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Spring loaded solder sucker tool.\u003cbr\u003e- Light weight \u0026amp; simple to operate.\u003cbr\u003e- Helps to remove excess solder\u003cbr\u003e- Aluminum \u0026amp; plastic construction\u003cbr\u003e- 200mm length\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eRemove excess or unwanted solder solder during repairs and part removal with this manual vacuum solder desoldering pump.\u003cbr\u003e\u003cbr\u003eThe pump is string loaded to create a small vacuum capable of sucking away liquid solder.\u003cbr\u003e\u003cbr\u003eTo use the desoldering pump you first press down the spring loaded mechanism so that it is primed, then using a soldering iron you heat the solder to be removed, once the solder is molten liquid you place the nozzle of the pump very close to the solder and press in the button, the solder is then sucked away and where it instantly cools back to a solid solder.\u003cbr\u003e\u003cbr\u003eSoldering iron not included.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"HOT,VENT,GUIDE\" data-zl-file=\"ZL-TF-TOOL-S00-016\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":44048818143484,"sku":"200245","price":5.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/3slfcrpo2fs.jpg?v=1794000570"},{"product_id":"fine-tip-tweezers-for-electronics-games-consoles-handhelds-controllers-esd-safe-anti-static-zedlabz","title":"Fine tip tweezers for electronics, games consoles, handhelds \u0026 controllers ESD safe anti static | ZedLabz","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Fine point tweezers for electronic repairs and modding.\u003cbr\u003e- Ideal for pulling, holding \u0026amp; picking anything from wires to screws or components.\u003cbr\u003e- Small tip ideal for general use.\u003cbr\u003e- ESD coated to protect against static damage.\u003cbr\u003e- Length 13cm approximate.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eUse these fine pointed tweezers for multiple purposes including placing, poking, scratching and hold when working on PCBs. \u003cbr\u003e\u003cbr\u003eESD safe, ideal for electronics use.\u003cbr\u003e\u003cbr\u003eThe tweezers are non magnetic and resistant to many chemicals including most acids.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SHARP\" data-zl-file=\"ZL-TF-TOOL-S00-023\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e- Sharp points or edges – handle and store with care.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":44051396067580,"sku":"100959","price":3.77,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/cv21qynmark.jpg?v=1794000600"},{"product_id":"9-in-1-precision-screwdriver-security-game-bit-tool-kit-with-prying-spudger-zedlabz","title":"9 in 1 precision screwdriver \u0026 security game bit tool kit with prying spudger | ZedLabz","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Metal screwdriver set for a wide range of gaming devices \u0026amp; game cartridges\u003cbr\u003e- Includes cross Philips PH00, Y000, TR6, T8, Gamebit 3.8 \u0026amp; 4.5 \u003cbr\u003e- Includes two prying spudger tools\u003cbr\u003e- Rubber grip handle aids in screwing and unscrewing.\u003cbr\u003e- Simple interchangeable bits \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis 10 in 1 set of tools is compatible with a wide variety of gaming controllers, consoles, handhelds and game cartridges.\u003cbr\u003e\u003cbr\u003eIncluded are 8 different driver bits, a driver handle and two different prying spudger tools.\u003cbr\u003e\u003cbr\u003eUse this set to open up your gaming gear to replace batteries, made repairs or modify them with new parts.\u003cbr\u003e\u003cbr\u003eColour of set may vary between blue and orange depending on the production batch.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eScrewdriver \u003cstrong\u003ecompatibility\u003c\/strong\u003e list (Game Bit 3.8 \u0026amp; 4.5):\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eConsoles \u0026amp; accessories:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eNintendo SNES console\u003cbr\u003eNintendo N64 console\u003cbr\u003eNintendo N64 rumble pak\u003cbr\u003eNintendo GameCube console\u003cbr\u003eNintendo Virtual Boy\u003cbr\u003eNintendo Super Gameboy\u003cbr\u003eSega Megadrive (Genesis)\u003cbr\u003eSega Mastersystem\u003cbr\u003eSega 32X\u003cbr\u003eSega Gamegear\u003cbr\u003eSega Nomad\u003cbr\u003eTurbografx 16\u003cbr\u003eTurbo Duo\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCartridge Games:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eNintendo NES\u003cbr\u003eNintendo SNES\u003cbr\u003eNintendo N64\u003cbr\u003eNintendo Game boy\u003cbr\u003eNintendo Game boy color\u003cbr\u003eNintendo Virtual Boy\u003cbr\u003eSega Mastersystem\u003cbr\u003eSega Megadrive\u003cbr\u003eSega Gamegear\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eScrewdriver \u003cstrong\u003ecompatibility\u003c\/strong\u003e list (PH00\/Y0\/Y000):\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eNintendo DS Lite\u003cbr\u003eNintendo DSi\u003cbr\u003eNintendo DSi XL\u003cbr\u003eNintendo Game boy\u003cbr\u003eNintendo Game boy pocket\u003cbr\u003eNintendo Game boy colour\u003cbr\u003eNintendo Game boy advance\u003cbr\u003eNintendo Game boy advance sp\u003cbr\u003eNintendo Wii\u003cbr\u003eNintendo Wii U\u003cbr\u003eNintendo Switch\u003cbr\u003eNintendo game boy advance game cartridges\u003cbr\u003eNintendo GameCube controller\u003cbr\u003eNintendo Wii controller \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eScrewdriver \u003cstrong\u003ecompatibility\u003c\/strong\u003e list (T6\/T8):\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eXbox 360 controller\u003cbr\u003eXbox One controller\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR\" data-zl-file=\"ZL-TF-TOOL-S00-020\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Metal tip can injure if the tool slips – use the right size and keep hands clear of the tip.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":44060147089660,"sku":"100969","price":7.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/ryv2qypqgqp.jpg?v=1794000660"},{"product_id":"wet-dry-lcd-tft-screen-cleaning-wipes-anti-static-alcohol-free-4-pack-my-wipe","title":"Wet \u0026 dry LCD \/ TFT screen cleaning wipes anti static alcohol free - 4 pack | My wipe","description":"\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Wet \u0026amp; dry cleaning wipes for LCD \/ TFT screens, PDAs \u0026amp; coated screens.\u003cbr\u003e- Alcohol free - safe for protective coatings and bear screens.\u003cbr\u003e- Includes 4 sachets (2 dry wipes \u0026amp; 2 wet wipes)\u003cbr\u003e- Anti static, allowing screens to be cleaned of dust.\u003cbr\u003e- Dry wipe aids in achieving a smear free finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eScreens such as bear LCD \/ TFT panels found on laptops, TVs, and games consoles should not be cleaned with every day household cleaning products or IPA wipes, as the ingredients can cause permanent damage.\u003cbr\u003e\u003cbr\u003eThese wipes are alcohol free wipes designed specifically for cleaning LCD panels and and coated screens without damaging the screen or removing any coatings.\u003cbr\u003e\u003cbr\u003e10 sachets are included, 2 wet wipes and 2 dry wipes.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"\" data-zl-file=\"ZL-DR-MYWIPE\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: My wipe · Seller: Assecure Ltd (ZedLabz), Maldon CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"My wipe","offers":[{"title":"Default Title","offer_id":44065962098940,"sku":"100973","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/bk0y2dxqibs.jpg?v=1794000723"},{"product_id":"thermal-paste-cleaning-wipes-for-removing-old-compound-from-cpu-gpu-and-heatsinks-na-cw1-5-pack-noctua","title":"Thermal paste cleaning wipes for removing old compound from CPU, GPU and heatsinks NA-CW1 - 5 pack | Noctua","description":"\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Wet wipes for cleaning off thermal compound paste\u003cbr\u003e- Use when replacing compound or removing from unwanted areas.\u003cbr\u003e- Suitable for CPU, GPU and Heatsink cleaning.\u003cbr\u003e- Ideal for Computers and Games Consoles.\u003cbr\u003e- Includes 5 sachets.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe NA-CW1 is an individually packed cleaning wipe for removing thermal compounds.\u003cbr\u003e\u003cbr\u003ePre-moistened with a custom detergent mixture, these wipes are ideal for cleaning CPUs, GPUs and the contact surface of heatsinks in a quick and efficient manner.\u003cbr\u003e\u003cbr\u003e5 sachets included.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"\" data-zl-file=\"ZL-IF-NOCTUA\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Noctua · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Noctua","offers":[{"title":"Default Title","offer_id":44654959362300,"sku":"300944","price":4.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/mtjhy4pssbi.jpg?v=1794002096"},{"product_id":"thermal-pad-multipack-for-heatsink-gpu-cpu-100x100mm-5-0-4-0-3-0-2-5-2-0-1-5-1-0-0-5mm-thickness-zedlabz","title":"Thermal pad multipack for heatsink GPU CPU 100x100MM - 5.0,4.0,3.0,2.5,2.0,1.5,1.0,0.5MM thickness | ZedLabz","description":"\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Replacement thermal pad set for Nintendo GameCube\u003cbr\u003e- 2 x 1MM small rectangles for the Sram chips\u003cbr\u003e- 1 x 2mm square for the CPU chip\u003cbr\u003e- 1 x 1.5mm square for the GPU chip\u003cbr\u003e- Comes with protective plastic film that needs to be removed.\u003cbr\u003e- Cut to size and ready to install - Color may vary\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eIf your GameCube is overheating, or you have needed to remove the heat sink for a repair or mod, then you will need to replace the thermal pads.\u003cbr\u003e\u003cbr\u003eThe GameCube requires three different thicknesses of thermal pad for different motherboard chips, so we created this pack which contains the correct sizes needed.\u003cbr\u003e\u003cbr\u003eThe GameCube thermal pad thicknesses are:\u003cbr\u003e\u003cbr\u003e1MM for the Sram - There are two Sram chips, these are the smallest rectangular chips - Pad size approx 20 x 10 x 1mm\u003cbr\u003e1.5MM for the GPU - There is one GPU chip, its the biggest square chip in the middle - Pad size approx 40 x 40 x 1.5mm\u003cbr\u003e2.00MM for the CPU p There is a single CPU chip, its the smaller of the square chips - Pad size approx 25 x 25 x 2.0mm\u003cbr\u003e\u003cbr\u003eAll of the above are included in this kit and each thermal pad has been conveniently cut to size, and is ready to use.\u003cbr\u003e\u003cbr\u003eTo install the pads simply remove the headsink, clean off the old paste or thermal pads and your ready to fit these fresh ones.\u003cbr\u003e\u003cbr\u003eThe kit has three different thicknesses of thermal pad material, so that once installed, the level of all of the chips are the same against the heatsink for optimal heat transfer.\u003cbr\u003e\u003cbr\u003eRemove the backing material from the back and plastic film from the front of each thermal pad as you place them down onto the corresponding size chips, as these are cut to size, you cannot put the wrong thickness or pad onto the wrong chip, each chip type is a different size.\u003cbr\u003e\u003cbr\u003eOnce the pads are in place simply screw the heatsink back into place.\u003cbr\u003e\u003cbr\u003eThis kit is fairly essential for anyone installing a Raspberry Pico into their GameCube as this requires the removal of the heatsink to install the wires, and the thermal material will often be damaged during the removal.\u003cbr\u003e\u003cbr\u003eIf repairing or modding a console, this normally involves the disassembling of the console which comes with potential risks of causing damage or further damage to the console, this is done at owners risk.\u003cbr\u003e\u003cbr\u003eColor of product may vary.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"GUIDE\" data-zl-file=\"ZL-TF-CONSUMABLE-S00-006\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":44824933826812,"sku":"200249","price":28.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/thermal-pad-multipack-for-heatsink-gpu-cpu-100x100mm-5040302520151005mm-thickness-zedlabz200249zedlabz-118095.jpg?v=1741475337"},{"product_id":"no-clean-flux-pen-for-reworking-or-touching-up-solder-10ml-chipquik","title":"No Clean Flux pen for reworking or touching up solder - 10ml | Chipquik","description":"\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Chipquik flux pen\u003cbr\u003e- No clean CQ4LF flux\u003cbr\u003e- 10ml depensing pen with cap\u003cbr\u003e- Push tip to start flow\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis no clean flux pen is ideal as a soldering aid or to rework and touch up soldering. \u003cbr\u003e\u003cbr\u003eHow to use: push tip of the pen to start flow. \u003cbr\u003e\u003cbr\u003e10ML liquid, includes spare tip.\u003cbr\u003e\u003cbr\u003eGenuine Chipquik product from major distributor.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,HOT,VENT,GUIDE\" data-zl-file=\"ZL-IF-CHIPQUIK\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Chemical product – read the hazard label on the pack before use.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: ChipQuik · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Chipquik","offers":[{"title":"Default Title","offer_id":44867054862588,"sku":"300060","price":12.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/no-clean-flux-pen-for-reworking-or-touching-up-solder-10ml-chipquik300060chipquik-527884.jpg?v=1743000055"},{"product_id":"ts101-smart-soldering-iron-with-oled-display-usb-c-includes-b2-tip-miniware","title":"TS101 Smart soldering iron with OLED display \u0026 USB-C (includes TS-BC2 tip) | Miniware","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- USB C or DC powered, use power banks or USBC wall plugs to power\u003cbr\u003e- New larger sized OLED display with info \u0026amp; settings control\u003cbr\u003e- Easy changing of tips to swap size \/ style or replace worn tips\u003cbr\u003e- Adjustable pre-sets, fast heat up boost, sleep mode, standby \u0026amp; firmware updatable\u003cbr\u003e- Includes TS-BC2 tip and heat resistant USB C cable.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePlease note: \u003c\/strong\u003eyou will need your own USB power source or DC plug to use the iron, see description below to check if you have a compatible plug.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eIntroducing the Miniware TS-101 Soldering Iron – your compact and versatile solution for precision soldering tasks. This sleek and portable soldering iron is the latest iteration of the TS series of soldering iron from Miniware, offering updated features compared to the TS80 \u0026amp; TS100 models, it offering the perfect balance of performance and convenience for both beginners and experienced electronics engineers.\u003cbr\u003e\u003cbr\u003eThe Miniware TS-101 features a durable and ergonomic design, ensuring a comfortable grip for extended use. Its compact size makes it easy to handle and store, making it an ideal tool for on-the-go soldering projects. The adjustable temperature control allows you to tailor the heat to your specific soldering needs, ensuring precision and efficiency with every use.\u003cbr\u003e\u003cbr\u003eEquipped with advanced heating technology, this soldering iron boasts a rapid heat-up time, allowing you to get to work quickly and efficiently. The ceramic heating element ensures consistent and stable temperatures, enabling precise soldering on a variety of electronic components.\u003cbr\u003e\u003cbr\u003eSay goodbye to cumbersome cords and restrictive workspaces – the Miniware TS101 can now be powered by a convenient USB-C connection, providing flexibility and compatibility with a range of power sources such as a portable power bank. Whether you're working in a workshop, at home, or on the field, this soldering iron can be adapted to the situation, the addition of USB-C offers a significant upgrade to make this flexibility possible, but the DC jack option is still retained in the TS101 should you wish to use it instead.\u003cbr\u003e\u003cbr\u003eExperience hassle-free soldering with the Miniware TS-101. Elevate your soldering projects with this reliable, compact, and feature-packed soldering iron that delivers professional results every time. Get yours today and discover the convenience of precision soldering at your fingertips.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat power plug do i need for the Miniware TS-101?\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eTo use this soldering iron you will need a suitable USB-C PD3.1 or 3.0 power plug \/ PD 3.0 or higher power bank, or a DC jack power supply, these power supplies are not included with the iron, you will receive a USB C cable only. \u003cbr\u003e\u003cbr\u003eFor using the full 90W power capabilties you will need  a 28W 5A USB-C PD3.1 power plug, 90W is not essential and is optional.\u003cbr\u003e\u003cbr\u003eYou can use a lower spec plug for lower wattages, minimum would be a USB 3.0 type charger capable of 9V, the iron will accept a wide range of voltages of 9 to 28V from USB sources.\u003cbr\u003e\u003cbr\u003eYou can use a DC barrel type plug as an alternative to USB, barrel size 5.5 x 2.5, voltage DC 9 to 24V.  \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications for Miniware TS101\u003c\/strong\u003e:  \u003cbr\u003e\u003cbr\u003e- Max. Ouput Power: 65W(DC), 90W(PD)*\r\n\u003cbr\u003e- Input Voltage: DC9-24V, PD3.1 9-28V\r\n\u003cbr\u003e- Power Jack: DC5.5*2.5, USB Type C\r\n\u003cbr\u003e- Temperature Heating Adjustable Range: 50C-400C\/122F -752F\r\n\u003cbr\u003e- Temperature Stability Range: +\/-2%\r\n\u003cbr\u003e- Soldering Iron Handle Size:16.8X95mm(D*L)\r\n\u003cbr\u003e- Soldering Iron Tip Size: 15.5X105mm(D*L, TS-B2)\r\n\u003cbr\u003e- Overall Length:168mm(tip installed)\r\n\u003cbr\u003e- Net Weight:33g\r\n\u003cbr\u003e\u003cbr\u003e *For this voltage level, please use a PD3.1 28V power supply and a USB-C power cable supporting 50V 5A 240W EPR At the same time, set menu PDP wmax as off.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"HOT,SHARP\" data-zl-file=\"ZL-IF-MINIWARE\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e- Hot tip or surface – can burn. Use the stand and let it cool.\u003cbr\u003e- Glass – sharp if broken; handle with care.\u003cbr\u003e- Do not use if the cable or insulation is damaged.\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Miniware · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Miniware","offers":[{"title":"Default Title","offer_id":45013424832764,"sku":"300728","price":72.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/ts101-smart-soldering-iron-with-oled-display-usb-c-includes-ts-bc2-tip-miniwareminiware-7995867.jpg?v=1766439725"},{"product_id":"99-ipa-small-bottle-zedlabz","title":"Isopropyl alcohol cleaning liquid 99% IPA lab grade bottle 30ML | ZedLabz","description":"\u003cb\u003eFeatures: \u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Isopropyl alcohol cleaning liquid for multiple applications - 30ml\u003cbr\u003e- Ideal for removing dust, dirt, grease and other foreign materials.\u003cbr\u003e- 99% lab grade made in the UK\u003cbr\u003e- Avoid breathing vapours. Avoid Eye Contact.\u003cbr\u003e- supplied in sealed plastic bottle - 30ml included.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription: \u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eOur IPA liquid is useful for many aspects of gaming such as cleaning PCB during repairs and modding, or when using a 1UP console cleaner to remove dirt from your the game cartridge slot.\u003cbr\u003e\u003cbr\u003eThe Isopropyl is high purity 99% lab grade, ideal for use with electronics. IPA will clean adhesives, grease and many other materials such as thermal paste found on game console heat sinks.\u003cbr\u003e\u003cbr\u003eThis high strength IPA should not be used onto plastics, it is generally not advisable to use IPA on plastics even at lower strength.\u003cbr\u003e\u003cbr\u003eSupplied as 30ML measure of IPA in a plastic bottle with a tamper proof cap, \u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-clp\"\u003e\n\u003cstrong\u003eChemical hazard information:\u003c\/strong\u003e Danger. Highly flammable liquid and vapour. Causes serious eye irritation. May cause drowsiness or dizziness. Keep away from heat, sparks and open flames.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"KOR\" data-zl-file=\"ZL-TF-CONSUMABLE-S00-011\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Chemical product – read the hazard label on the pack before use.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":46095338963196,"sku":"000199","price":3.61,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/isopropyl-alcohol-cleaning-liquid-99-ipa-lab-grade-bottle-30ml-zedlabz000199zedlabz-393974.jpg?v=1741475208"},{"product_id":"nc191-flux-smooth-flow-tack-flux-no-clean-small-tube-for-reworking-or-touching-up-solder-2g-chipquik","title":"NC191 flux smooth flow tack flux no clean small tube for reworking or touching up solder - 2g | Chipquik","description":"\u003cb\u003eFeatures: \u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Chipquik flux tube\u003cbr\u003e- No clean smooth flowing\u003cbr\u003e- 2grams NC191\u003cbr\u003e- Ideal for modding projects and repairs\u003cbr\u003e- Genuine product from major distributor\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription: \u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThis no clean flux is ideal as a soldering aid for modding projects and electornic repairs.\u003cbr\u003e\u003cbr\u003eThe smaller quantity is good for hobby use and small business as flux does have a lifespan (shelf life) and performs worse over time.\u003cbr\u003e\u003cbr\u003eYou can use it to solder more difficult components such as IC chops or to rework and touch up solder points.\u003cbr\u003e\u003cbr\u003eFlux aids the melting and slow of solder, helping to move solder more freely with various soldering techniques such as drag soldering along a row of legs on a component.\u003cbr\u003e\u003cbr\u003eSimple to dispense by squeezing the tube, screw on cap for storage.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-clp\"\u003e\n\u003cstrong\u003eChemical hazard information:\u003c\/strong\u003e Warning. Harmful if swallowed, in contact with skin or if inhaled. May cause an allergic skin reaction. Causes skin irritation and serious eye irritation. May cause respiratory irritation.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"KOR,HOT,VENT,GUIDE\" data-zl-file=\"ZL-IF-CHIPQUIK\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Chemical product – read the hazard label on the pack before use.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: ChipQuik · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ChipQuik","offers":[{"title":"Default Title","offer_id":46625541947644,"sku":"000170","price":4.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/nc191-flux-smooth-flow-tack-flux-no-clean-small-tube-for-reworking-or-touching-up-solder-2g-chipquik000170chipquik-481921.jpg?v=1741475051"},{"product_id":"kapton-polyimide-insulating-tape-for-repairs-modding-10mm-x-30-meter-roll-zedlabz","title":"Kapton polyimide insulating tape for repairs \u0026 modding - 10mm x 30 meter roll | ZedLabz","description":"\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- 10mm Kapton polyimide tape with adhesive.\u003cbr\u003e- 30 Meter approx on roll.\u003cbr\u003e- Easy to cut to size with scissors or a knife\u003cbr\u003e- Yellow semi transparent colour.\u003cbr\u003e- For repairs \u0026amp; modding. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription: \u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e10mm Kapton tape with adhesive backing for Repairs and modding.\u003cbr\u003e\u003cbr\u003eCan be used for insulation and solder masking, ideal for a wide range of games console mods and repairs such as Game Boy handhelds and home game console modding.\u003cbr\u003e\u003cbr\u003eHigh temperature resistance up to 250 degrees centigrade.\u003cbr\u003e\u003cbr\u003eMaterial type Polymide 0.06mm thickness.\u003cbr\u003e\u003cbr\u003e30 meters on a roll.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"\" data-zl-file=\"ZL-TF-CONSUMABLE-S00-007\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":46663713227004,"sku":"300852","price":3.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/ma3vrmqdgve.jpg?v=1794007512"},{"product_id":"replacement-speaker-for-nintendo-game-boy-advance-console-gba-agb-cgs","title":"Replacement speaker for Nintendo Game Boy Advance console (GBA AGB) | CGS","description":"\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Replacement speaker for Game Boy Advance handhelds\u003cbr\u003e- Offers the same output as a new original speaker\u003cbr\u003e- Speaker plastic is specifically shaped for the console housing\u003cbr\u003e- Ideal for replacing faulty speakers or to change the aesthetic\u003cbr\u003e- Requires wire stripping \u0026amp; internal soldering\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eReplacement speaker for Nintendo Game Advance handheld console. \u003cbr\u003e\u003cbr\u003eThe speaker is compatible with Game Boy Advance only, the physical shape of the speaker and the output matches the original making it a like for like replacment.\u003cbr\u003e\u003cbr\u003eTo install this speaker you will need to remove the old speaker first which with a soldering iron and solder sucker or desoldering braid. Use the old speaker to judge the wire length you require and then strip the wires for installation (cut the white connector off,). \u003cbr\u003e\u003cbr\u003eTin the ends and then proceed to install into the console, the soldering of the wires is a through hole type where the wires are poked through holes on the motherboard, the cleaning up is important before installation of the new wires but this is generally an entry level soldering task, that said practicing on junk electronics is recommended for beginners.\u003cbr\u003e\u003cbr\u003eNOTE: The glow in the dark colour option will be impacted by the shell used: The speaker will beed a transparent shell however a darker coloured shell will likely inhibit the performance of the glow as the speaker needs to be exposed to light in order for it to charge up and create the glow effect.\u003cbr\u003e\u003cbr\u003eConsole will need to be disassembled to install, this will void any warranty and is done at owners risk. Please seek professional assistance if unsure.\u003cbr\u003e\u003cbr\u003eNot suitable for Advance SP models, for Advance only. \u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,HOT,VENT,GUIDE\" data-zl-file=\"ZL-IF-CGS-ELEC-SPEAKER\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Contains magnets – if swallowed, get medical help immediately.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: CGS · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"CGS","offers":[{"title":"Red","offer_id":46676957495548,"sku":"200006","price":4.22,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":46676957528316,"sku":"200008","price":4.22,"currency_code":"GBP","in_stock":true},{"title":"Green","offer_id":46676957561084,"sku":"200009","price":4.22,"currency_code":"GBP","in_stock":true},{"title":"Pink","offer_id":46676957593852,"sku":"200010","price":4.22,"currency_code":"GBP","in_stock":true},{"title":"Glow in the dark","offer_id":46676957626620,"sku":"200011","price":4.22,"currency_code":"GBP","in_stock":true},{"title":"Purple","offer_id":46676957659388,"sku":"200208","price":4.22,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/replacement-speaker-for-nintendo-game-boy-advance-console-gba-agb-cgs200006cgs-850220.jpg?v=1741475049"},{"product_id":"100-isopropyl-aclcohol-cleaning-wipes-185mm-x-145mm-10-pack-mywipe","title":"100% Isopropyl Alcohol Cleaning Wipes 185mm x 145mm 10 Pack | MyWipe","description":"\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e100% isopropyl alcohol cleaning wipes\u003c\/li\u003e\r\n\u003cli\u003eIndividually sealed sachets for single use\u003c\/li\u003e\r\n\u003cli\u003eWipe size approximately 185mm x 145mm (18.5cm x 14.5cm)\u003c\/li\u003e\r\n\u003cli\u003eSupplied as a 10 pack\u003c\/li\u003e\r\n\u003cli\u003eSuitable for cleaning electronics and surface preparation\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eThese 100% isopropyl alcohol cleaning wipes are supplied as a 10 pack of individually sealed sachets. Each wipe measures approximately 185mm x 145mm, providing a suitable size for cleaning a range of surfaces.\u003c\/p\u003e\r\n\u003cp\u003eThe wipes are intended for removing dust, grease, and residue from electronics and other surfaces prior to installation or general maintenance. The use of 100% isopropyl alcohol allows for fast evaporation during cleaning. Individual packaging helps maintain moisture until use.\u003c\/p\u003e\r\n\u003cp\u003eSuitable for applications such as removal of residues from PCBs, device cleaning, and general electronics maintenance.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eFurther Info\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eBrand: MyWipe\u003c\/li\u003e\r\n\u003cli\u003eQuantity: 10 wipes (individual sachets)\u003c\/li\u003e\r\n\u003cli\u003eWipe size: 185mm x 145mm (18.5cm x 14.5cm)\u003c\/li\u003e\r\n\u003cli\u003eAlcohol content: 100% isopropyl alcohol\u003c\/li\u003e\r\n\u003cli\u003eType: Cleaning wipe\u003c\/li\u003e\r\n\u003cli\u003eUse: Cleaning and surface preparation\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eInstallation Tips\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eUse on powered-off devices only\u003c\/li\u003e\r\n\u003cli\u003eAllow surface to dry fully before use or installation\u003c\/li\u003e\r\n\u003cli\u003eDo not reuse wipes once opened\u003c\/li\u003e\r\n\u003cli\u003eAvoid excessive pressure on delicate surfaces\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eQ: Are these individually wrapped?\u003c\/strong\u003e\u003cbr\u003e\r\nA: Yes, each wipe is supplied in an individual sachet.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eQ: What can these be used for?\u003c\/strong\u003e\u003cbr\u003e\r\nA: They are suitable for cleaning electronics and surfaces prior to installation or maintenance.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eQ: Can these be reused?\u003c\/strong\u003e\u003cbr\u003e\r\nA: No, these are intended for single use.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eQ: Do these dry quickly?\u003c\/strong\u003e\u003cbr\u003e\r\nA: The wipes use 100% isopropyl alcohol, which is designed to evaporate quickly after application.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eProduct Safety\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKeep out of reach of children\u003c\/li\u003e\n\u003cli\u003eFlammable, keep away from heat, sparks, and open flames\u003c\/li\u003e\r\n\u003cli\u003eMay cause drowsiness or dizziness. \u003c\/li\u003e\n\u003cli\u003eAvoid breathing vapours.\u003c\/li\u003e\r\n\u003cli\u003eAvoid contact with eyes and limit skin contact, use gloves if possible.\u003c\/li\u003e\n\u003c\/ul\u003e\r\n\u003cp\u003eThis product is manufactured by MyWipe in the United Kingdom, Product is labelled in accordance with the Classification Labelling and Packaging Regulation EC (no) 1272\/2008.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-clp\"\u003e\n\u003cstrong\u003eChemical hazard information:\u003c\/strong\u003e Danger. Highly flammable liquid and vapour. Causes serious eye irritation. May cause drowsiness or dizziness. Keep away from heat, sparks and open flames.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"KOR\" data-zl-file=\"ZL-DR-MYWIPE\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Chemical product – read the hazard label on the pack before use.\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: My wipe · Seller: Assecure Ltd (ZedLabz), Maldon CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Mywipe","offers":[{"title":"Default Title","offer_id":48901321687292,"sku":"000965","price":3.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/100-isopropyl-alcohol-cleaning-wipes-185mm-x-145mm-10-pack-mywipemywipe-7875313.jpg?v=1774964789"},{"product_id":"mini-magnetic-project-work-mat-160x50mm-zedlabz","title":"Mini Magnetic Screw Work Mat 160 x 50mm for Electronics Repair | ZedLabz","description":"\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eMini magnetic project work mat\u003cbr\u003eCompact 160 × 50 mm working area\u003cbr\u003eMagnetic surface helps hold small screws and metal components\u003cbr\u003eIdeal for electronics repair and maintenance\u003cbr\u003eDry-wipe surface for writing notes and part locations\u003cbr\u003eLightweight and portable design\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThis mini magnetic project work mat is designed to help keep small screws and metal components organised while carrying out repairs. The compact 160 × 50 mm size makes it ideal for smaller workspaces and handheld electronics repairs.\u003cbr\u003e\u003cbr\u003eThe magnetic surface helps prevent screws from rolling away while the dry-wipe finish allows component positions or notes to be written directly onto the mat using a suitable dry-wipe marker (not included).\u003cbr\u003e\u003cbr\u003eSuitable for console repairs, controller repairs, mobile devices and other small electronic projects.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFurther Info:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eWorking area: 160 × 50 mm\u003cbr\u003eMagnetic surface\u003cbr\u003eDry-wipe compatible\u003cbr\u003eLightweight portable design\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFAQ:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eQ: What can I use this mat for?\u003cbr\u003eA: The mat is ideal for organising screws and small metal components during electronics repairs and maintenance.\u003cbr\u003e\u003cbr\u003eQ: Does the mat hold all components magnetically?\u003cbr\u003eA: The magnetic surface is designed to help retain ferrous (magnetic) screws and small metal parts. Non-magnetic components will not be held in place.\u003cbr\u003e\u003cbr\u003eQ: Can I write on the mat?\u003cbr\u003eA: Yes. The surface is suitable for use with dry-wipe markers, allowing notes or screw locations to be marked and wiped clean afterwards.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"\" data-zl-file=\"ZL-TF-TOOL-S00-018\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":50928491167996,"sku":"300606","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/mini-magnetic-screw-work-mat-160-x-50mm-for-electronics-repair-zedlabzzedlabz-7038377.jpg?v=1786191487"},{"product_id":"15mm-desoldering-wick-15m-zedlabz","title":"Desoldering Wick 1.5mm x 1.5m AA Size Fluxed Copper Braid | ZedLabz","description":"Remove unwanted solder quickly and cleanly with this 1.5 mm desoldering wick. \u003cbr\u003e\u003cbr\u003eIdeal for electronics repair, the flux-impregnated copper braid helps absorb molten solder, leaving solder joints clean and ready for rework or replacement components.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e1.5 mm wide desoldering wick x 1.5 metre length\u003c\/li\u003e\n\u003cli\u003eFlux-impregnated pure copper braid\u003c\/li\u003e\n\u003cli\u003eHelps remove excess molten solder from PCB joints\u003c\/li\u003e\n\u003cli\u003eLeaves solder pads clean and ready for resoldering\u003c\/li\u003e\n\u003cli\u003eSupplied on a convenient plastic storage spool\u003c\/li\u003e\n\u003c\/ul\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThis 1.5 mm desoldering wick is designed for electronics repair and rework, helping to remove molten solder from printed circuit boards.\u003cbr\u003e\u003cbr\u003eIdeal for component replacement, clearing solder bridges between pins or pads, and preparing PCB joints for clean resoldering.\u003cbr\u003e\u003cbr\u003eManufactured from flux-impregnated pure copper braid, it efficiently draws solder away from the joint by capillary action, leaving pads and through-holes clean and ready for fresh solder.\u003cbr\u003e\u003cbr\u003eSupplied on a compact plastic spool, the 1.5 metre length is easy to dispense, store and keep tidy between repairs.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFurther Info:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eWidth: 1.5 mm\u003cbr\u003eLength: 1.5 m\u003cbr\u003eMaterial: Flux-impregnated pure copper braid\u003cbr\u003eSupplied on plastic spool\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"HOT,VENT,GUIDE\" data-zl-file=\"ZL-TF-CONSUMABLE-S00-013\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":50951668531452,"sku":"300603","price":3.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/desoldering-wick-15mm-x-15m-aa-size-fluxed-copper-braid-zedlabzzedlabz-2698313.jpg?v=1786191486"},{"product_id":"replacement-internal-speaker-for-nintendo-game-boy-advance-clear-zedlabz","title":"Replacement internal speaker for Nintendo Game Boy Advance GBA AGB - Clear | ZedLabz","description":"Replacement clear internal speaker for the original Nintendo Game Boy Advance (AGB-001), ideal for repairing faulty audio or completing a transparent custom GBA build.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eReplacement internal speaker for Nintendo Game Boy Advance\u003c\/li\u003e\n\u003cli\u003eClear construction ideal for transparent and semi-transparent shells\u003c\/li\u003e\n\u003cli\u003eSuitable for replacing a faulty, damaged or distorted original speaker\u003c\/li\u003e\n\u003cli\u003eDesigned to provide sound output comparable to the original speaker\u003c\/li\u003e\n\u003cli\u003eTwo-wire connection requires soldering to the console motherboard\u003c\/li\u003e\n\u003cli\u003eCompatible with the original Nintendo Game Boy Advance AGB-001\u003c\/li\u003e\n\u003c\/ul\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eReplace a faulty or damaged speaker in your Nintendo Game Boy Advance with this clear replacement internal speaker.\u003cbr\u003e\u003cbr\u003eDesigned as a replacement for the original GBA speaker, it is suitable for repairing consoles with distorted, intermittent or missing speaker audio where the original speaker has failed.\u003cbr\u003e\u003cbr\u003eThe transparent construction also makes it an ideal choice for custom Game Boy Advance builds using clear or semi-transparent shells, helping the internal components complement the overall appearance of the console.\u003cbr\u003e\u003cbr\u003eInstallation requires the Game Boy Advance to be opened and the original speaker removed. The replacement speaker connects to the motherboard using two wires which require soldering.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFurther Information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eCompatible console: Nintendo Game Boy Advance\u003cbr\u003eModel: AGB-001\u003cbr\u003eInstallation: Internal fitting required\u003cbr\u003eConnection: 2 soldered wires\u003cbr\u003eSoldering required: Yes\u003cbr\u003eGame Boy Advance SP compatibility: No\u003cbr\u003e\u003cbr\u003eThis is a third-party replacement component and is not manufactured, sponsored or endorsed by Nintendo.\u003cbr\u003e\u003cbr\u003eInstallation requires console disassembly and soldering. Please check compatibility before purchase and ensure you have the appropriate tools and experience before attempting installation.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,HOT,VENT,GUIDE\" data-zl-file=\"ZL-TF-ELEC-SPEAKER-S00-002\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Contains magnets – if swallowed, get medical help immediately.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":51220764131580,"sku":"400993","price":4.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/replacement-internal-speaker-for-nintendo-game-boy-advance-gba-agb-clear-zedlabzzedlabz-5271054.png?v=1788547107"},{"product_id":"ceramique-2-thermal-paste-compound-2-7g-artic-silver","title":"Céramique 2 thermal paste compound - 2.7g | Arctic Silver","description":"\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Arctic Silver Céramique 2 ceramic thermal compound\u003cbr\u003e- 2.7g syringe\u003cbr\u003e- Ceramic formula - not electrically conductive and not capacitive\u003cbr\u003e- Fills the gap between a chip and its heatsink to improve heat transfer\u003cbr\u003e- Suits console CPU\/GPU, voltage regulator and handheld repaste jobs\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eCéramique 2 is a ceramic-based thermal compound from Arctic Silver. Because it contains no metal it is electrically non-conductive and non-capacitive, making it a safe choice around small components.\u003cbr\u003e\u003cbr\u003eClean off the old compound first, apply a thin layer to the chip and refit the heatsink.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,VENT\" data-zl-file=\"\"\u003e\r\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Follow the safety information on the manufacturer’s packaging.\u003cbr\u003e- Avoid contact with eyes and skin; wash hands after use.\u003cbr\u003e- Use in a well-ventilated area.\u003cbr\u003e\u003cbr\u003e\r\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Arctic Silver. UK importer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\r\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Arctic Silver","offers":[{"title":"Default Title","offer_id":67824302981372,"sku":"000129","price":5.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/ceramique-2-thermal-paste-compound-27g-arctic-silverarctic-silver-8886045.jpg?v=1794004265"},{"product_id":"desoldering-braid-solder-wick-no-clean-2-0mm-x-5ft-3-green-chip-quik","title":"Desoldering braid solder wick no clean 2.0mm x 5ft - #3 Green | Chip Quik","description":"\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Chip Quik SOLDERWICK2.0 no-clean desoldering braid\u003cbr\u003e- 2.0mm (0.08in) wide, 5ft (1.52m) long - size #3 green\u003cbr\u003e- No-clean flux (ROL0) - residues can usually be left on the board\u003cbr\u003e- Copper braid on a handy bobbin dispenser\u003cbr\u003e- Ideal for clearing pads and through-holes on console and controller boards\u003cbr\u003e- RoHS compliant\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eChip Quik SOLDERWICK2.0 is a quality copper desoldering braid for lifting old solder off pads, clearing through-hole joints and tidying up after component removal. The #3 green size is 2.0mm wide, a good all-round width for console and controller repair work.\u003cbr\u003e\u003cbr\u003eThe braid is impregnated with a no-clean flux, so it wicks solder quickly and leaves minimal residue. Lay it on the joint, press with a hot iron and the solder is drawn up into the braid; snip off the used section and carry on.\u003cbr\u003e\u003cbr\u003eSupplied as 5ft (1.52m) on a plastic bobbin.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,VENT\" data-zl-file=\"\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Follow the safety information on the manufacturer’s packaging.\u003cbr\u003e- Avoid contact with eyes and skin; wash hands after use.\u003cbr\u003e- Use in a well-ventilated area.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Chip Quik. UK importer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Chip Quik","offers":[{"title":"Default Title","offer_id":68027947188476,"sku":"300038","price":4.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/desoldering-braid-solder-wick-no-clean-20mm-x-5ft-3-green-chip-quikchip-quik-4005856.jpg?v=1793281818"},{"product_id":"universal-soldering-iron-stand-with-sponge-duratool","title":"Universal soldering iron stand with sponge | Duratool","description":"\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Universal bench stand for soldering irons\u003cbr\u003e- Cleaning sponge included\u003cbr\u003e- 100 mm spring holder with 32 mm inner cup\u003cbr\u003e- Stable base for safe resting of a hot iron\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eA simple, sturdy stand to park your soldering iron safely between joints while working on console repairs and mods.\u003cbr\u003e\u003cbr\u003eThe spring holder fits most standard pencil irons and the included sponge keeps the tip clean.","brand":"Duratool","offers":[{"title":"Default Title","offer_id":68058644578556,"sku":"001155","price":5.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/universal-soldering-iron-stand-with-sponge-duratoolzedlabz-5020652.jpg?v=1793645834"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/collections\/zl-game-boy-advance-speaker-audio-repair-parts-tools-1115.png?v=1794771280","url":"https:\/\/www.zedlabz.com\/en-au\/collections\/game-boy-advance-speaker-audio-repair-parts-tools.oembed","provider":"ZedLabz","version":"1.0","type":"link"}