{"title":"Hispeedido Laminated IPS Screens \u0026 Shells for Game Boy Advance","description":"\u003cp\u003eHispeedido laminated IPS screen kits for Game Boy Advance in a wide range of lens colours, plus the Hispeedido laminated IPS-ready no-cut shell and replacement laminated screens.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot interchangeable with FunnyPlaying:\u003c\/strong\u003e Hispeedido laminated GBA screens and shells use a different method of mounting the screen to the shell and a different shell design, so they will not fit FunnyPlaying laminated shells or screens.\u003c\/p\u003e","products":[{"product_id":"laminated-ips-ready-shell-for-nintendo-game-boy-advance-modified-no-cut-housing-agb-gba-hispeedido","title":"Laminated IPS ready shell for Nintendo Game Boy Advance modified no cut housing (AGB GBA) | Hispeedido","description":"\u003cb\u003eFeatures:\r\n\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Hispeedido Laminted IPS ready shell for Game Boy Advance\r\n\u003cbr\u003e- Compatible only with Hispeedido Laminated IPS screen kits.\u003cbr\u003e- Shell requires a ITA \/ IPS screen bracket (included with screen kits)\r\n\u003cbr\u003e- Includes screws and rear housing sticker.\r\n\u003cbr\u003e- IPS screen kit not included, Housing only.\r\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription:\r\n\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eUse this model of IPS ready shell for the Hispeedido laminated IPS screen for Game Boy advance.\u003cbr\u003e\u003cbr\u003ePlease be aware that other laminated Game Boy Advance screens will not fit this shell, this is specifically altered for use with the Hispeedido laminated panel.\u003cbr\u003e\u003cbr\u003eThe overall size, texture and appearance of the shell closely resembles the original game boy advance.\u003cbr\u003e\u003cbr\u003eThe front shell screen window is enlarged and ultered to allow a laminated panel to be used, you should test your screen first before installing, and then insert left side first at a slight angle.\u003cbr\u003e\u003cbr\u003eAvoid having to use DIY cutting methods, the cutting is challenging, and part of the shell needs to be sanded down to a smaller thickness, avoid all this hassle by purchasing one of these ready to use shells.\u003cbr\u003e\u003cbr\u003eThis is a front and back housing ONLY, no IPS kit or screen lens are included, included parts are as follows: Front and back housing, battery terminal contact, battery cover, rear sticker, button \u0026amp; screw set.\u003cbr\u003e\u003cbr\u003eA tri-wing screwdriver is needed to dissemble your console (not included).\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,GUIDE\" data-zl-file=\"ZL-IF-HISPEEDIDO-SHELL\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Hispeedido · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Hispeedido","offers":[{"title":"Black","offer_id":46528071958780,"sku":"000458","price":13.49,"currency_code":"GBP","in_stock":true},{"title":"Pink","offer_id":46528071991548,"sku":"000459","price":13.49,"currency_code":"GBP","in_stock":true},{"title":"Light Blue","offer_id":46528072024316,"sku":"000460","price":14.99,"currency_code":"GBP","in_stock":true},{"title":"Yellow","offer_id":46528072057084,"sku":"000466","price":14.99,"currency_code":"GBP","in_stock":true},{"title":"Purple","offer_id":46528072089852,"sku":"000461","price":14.99,"currency_code":"GBP","in_stock":true},{"title":"Grey - Super Famicom Grey","offer_id":46528072122620,"sku":"000462","price":14.99,"currency_code":"GBP","in_stock":true},{"title":"Off White","offer_id":46528072155388,"sku":"000463","price":13.49,"currency_code":"GBP","in_stock":true},{"title":"Clear light green","offer_id":46528072188156,"sku":"000464","price":13.49,"currency_code":"GBP","in_stock":true},{"title":"Clear Sea Green","offer_id":46528072220924,"sku":"300518","price":14.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":46528072253692,"sku":"300519","price":14.99,"currency_code":"GBP","in_stock":true},{"title":"Clear Black","offer_id":46528072286460,"sku":"000465","price":14.99,"currency_code":"GBP","in_stock":true},{"title":"Clear Orange","offer_id":46528072319228,"sku":"000467","price":14.99,"currency_code":"GBP","in_stock":true},{"title":"Clear atomic purple","offer_id":46528072351996,"sku":"000468","price":14.99,"currency_code":"GBP","in_stock":true},{"title":"Clear glacier blue","offer_id":46528072384764,"sku":"000469","price":14.99,"currency_code":"GBP","in_stock":true},{"title":"Clear Yellow","offer_id":46528072417532,"sku":"000470","price":13.49,"currency_code":"GBP","in_stock":true},{"title":"Clear","offer_id":46528072450300,"sku":"000471","price":14.99,"currency_code":"GBP","in_stock":true},{"title":"Clear Green","offer_id":46528072483068,"sku":"000472","price":14.99,"currency_code":"GBP","in_stock":true},{"title":"Clear Purple","offer_id":46528072515836,"sku":"000473","price":14.99,"currency_code":"GBP","in_stock":true},{"title":"Solid Orange","offer_id":46528072548604,"sku":"000475","price":14.99,"currency_code":"GBP","in_stock":true},{"title":"Green","offer_id":46528072581372,"sku":"000476","price":14.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/qr4w2hiaxb1.jpg?v=1794005823"},{"product_id":"replacement-laminated-ips-screen-for-nintendo-game-boy-advance-screen-only-hispeedido","title":"Replacement laminated IPS screen for Nintendo Game Boy Advance (screen only) | Hispeedido","description":"\u003cb\u003eFeatures: \u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- NOTE: SCREEN Only - This item will not work without the driver PCB board (sold only as a kit).\u003cbr\u003e- Replacement Hispeedido Laminated IPS screen for Game Boy Advance- IPS panel only \u003cbr\u003e- Ideal for replacing a broken IPS screen.\u003cbr\u003e- No cables, PCB boards, adhesives etc are included, only the screen with laminated glass lens.\u003cbr\u003e- Original Hispeedido product\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eNOTE: To use this product you must already own full laminated Hispeedido IPS upgrade kit with connecting ribbon and PCB driver board, this product only replaces the screen part of the kit if it has been damaged.\u003cbr\u003e\u003cbr\u003eThis is the IPS LCD Screen ONLY - No connecting cables or driver boards\u003cbr\u003e\u003cbr\u003eYou will need to pop open the back metal cover and transfer the PCB from your old screen to this new one, the ribbon cables should be disconnected and PCB removed, the PCB is held in place with two strips of adhesive, so you will need to pry the PCB carefully from the old screen, warming it up with a heat source such as a hair dryer can help soften the adhesive. The PCB must be installed into the back of the new IPS label and ribbon cables connected. \u003cbr\u003e\u003cbr\u003eYou should test the new IPS panel before installing it into your console, this laminated screen kit requires a specific shell, make sure your using a Hispeedido laminated shell or a shell that you have cut and trimmed according to the specific instructions provided by Hispeedido.\u003cbr\u003e\u003cbr\u003eCompatible with Nintendo Game Boy Advance laminated screen kit from Hispeedido\u003cbr\u003e\u003cbr\u003eConsole will need to be disassembled to install, this will void any warranty and is done at owners risk. Please seek professional advice if unsure.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SHARP,GUIDE\" data-zl-file=\"ZL-IF-HISPEEDIDO-OTHER\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e- Glass – sharp if broken; handle with care.\u003cbr\u003e- Wear eye protection when cutting or drilling.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Hispeedido · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Hispeedido","offers":[{"title":"Default Title","offer_id":46531843129596,"sku":"200675","price":20.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/sezfcpxkki4.jpg?v=1794005995"},{"product_id":"laminated-ips-lcd-screen-kit-30-for-nintendo-game-boy-advance-black-hispeedido","title":"Laminated IPS 3.0 LCD screen kit for Nintendo Game Boy Advance [GBA AGB] - White | Hispeedido","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n- Laminated IPS LCD screen for Nintendo Game Boy Advance consoles.\u003cbr\u003e\n- Colour: White.\u003cbr\u003e\n- Requires the Hispeedido laminated IPS ready shell to install (not compatible with the FunnyPlaying laminated shell).\u003cbr\u003e\n- Brightness, colour and display mode touch sensors built in.\u003cbr\u003e\n- 3.0\" screen size with traditional Advance logo on the glass.\u003cbr\u003e\n- Optional 3 wires to solder for OSD menu controls.\u003cbr\u003e\u003cbr\u003e\n\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe latest Game Boy Advance laminated display from Hispeedido offers a resolution closer to the original, giving an improved appearance compared to the 480 x 320 display.\u003cbr\u003e\u003cbr\u003eThe screen has touch sensors built in, which control features such as brightness and pixel mode options.\u003cbr\u003e\u003cbr\u003eFitting this IPS screen kit is simplified thanks to the integrated design: there are no PCBs to attach, no touch sensors to solder and no screen lens to align. It is compatible with both 32-pin and 40-pin versions of the GBA console.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eShell compatibility:\u003c\/strong\u003e this screen needs a \u003ca href=\"https:\/\/zedlabz.com\/products\/laminated-ips-ready-shell-for-nintendo-game-boy-advance-modified-no-cut-housing-agb-gba-hispeedido\"\u003elaminated IPS ready shell from Hispeedido\u003c\/a\u003e for a drop-in fit. It is not compatible with the FunnyPlaying laminated shell. We do not recommend trimming your own shell – it is much more difficult than it looks, as part of the shell has to be filed \/ sanded down, not just cut, and incorrect trimming may crack or damage the display.\u003cbr\u003e\u003cbr\u003eThe kit includes the LCD panel with laminated screen lens and the ribbon cable to connect it to the mainboard. Three pieces of hook-up wire are also included for optional soldering, which adds the on-screen display (OSD) menu. All of the OSD features can be controlled with the touch pads, so the no-solder option still gives you the same pixel modes etc. as when the optional wires are fitted.\u003cbr\u003e\u003cbr\u003eThe screen upgrade supports 15 levels of brightness, 8 colour modes and 4 display modes: default, retro pixel effect and 2 scan line effects.\u003cbr\u003e\u003cbr\u003eAs with any IPS screen upgrade, we recommend good quality batteries such as Eneloop or Ladda, or fitting a LiPo battery mod, due to the higher power requirements of IPS screens.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE: Please bench test the screen before installation to check for any issues – this helps us support your warranty. Leave the adhesive backing and protective film on the product until you are satisfied it is working correctly and there are no pixel faults. If you discover any faults, please send a picture of the bench test to support@zedlabz.com for assistance.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eSoldering is optional (3 wires in total). If fitted, the wires allow brightness control from the original brightness button and give access to the OSD menu.\u003cbr\u003e\u003cbr\u003eOther items needed (not included): a Hispeedido laminated IPS ready shell, basic tools to open the Game Boy and fit the screen, and a soldering iron (optional).\u003cbr\u003e\u003cbr\u003ePlease note the LCD screen and ribbon cable are fragile and need care to install. They are also more susceptible to damage once installed if the console is dropped, and LCD screens can crack under pressure or impact. Our warranty does not cover accidental \/ user damage to any components in this kit. A \u003ca href=\"https:\/\/zedlabz.com\/products\/replacement-laminated-ips-screen-for-nintendo-game-boy-advance-screen-only-hispeedido\"\u003ereplacement screen (screen only)\u003c\/a\u003e and \u003ca href=\"https:\/\/zedlabz.com\/products\/replacement-32-40-pin-connecting-ribbon-cables-for-game-boy-advance-ips-3-0-mod-hispeedido\"\u003ereplacement ribbon cables\u003c\/a\u003e are available to purchase separately.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,SHARP,GUIDE\" data-zl-file=\"ZL-IF-HISPEEDIDO-CE-LCDKIT\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Glass – sharp if broken; handle with care.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Hispeedido · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Hispeedido","offers":[{"title":"Default Title","offer_id":47006468473084,"sku":"000870","price":57.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/laminated-ips-30-lcd-screen-kit-for-nintendo-game-boy-advance-gba-agb-white-hispeedidohispeedido-1813354.jpg?v=1767352865"},{"product_id":"laminated-ips-lcd-screen-kit-30-for-nintendo-game-boy-advance-dmg-style-grey-hispeedido","title":"Laminated IPS 3.0 LCD screen kit for Nintendo Game Boy Advance [GBA AGB] - DMG Grey | Hispeedido","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n- Laminated IPS LCD screen for Nintendo Game Boy Advance consoles.\u003cbr\u003e\n- Colour: DMG Grey.\u003cbr\u003e\n- Requires the Hispeedido laminated IPS ready shell to install (not compatible with the FunnyPlaying laminated shell).\u003cbr\u003e\n- Brightness, colour and display mode touch sensors built in.\u003cbr\u003e\n- 3.0\" screen size with traditional Advance logo on the glass.\u003cbr\u003e\n- Optional 3 wires to solder for OSD menu controls.\u003cbr\u003e\u003cbr\u003e\n\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe latest Game Boy Advance laminated display from Hispeedido offers a resolution closer to the original, giving an improved appearance compared to the 480 x 320 display.\u003cbr\u003e\u003cbr\u003eThe screen has touch sensors built in, which control features such as brightness and pixel mode options.\u003cbr\u003e\u003cbr\u003eFitting this IPS screen kit is simplified thanks to the integrated design: there are no PCBs to attach, no touch sensors to solder and no screen lens to align. It is compatible with both 32-pin and 40-pin versions of the GBA console.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eShell compatibility:\u003c\/strong\u003e this screen needs a \u003ca href=\"https:\/\/zedlabz.com\/products\/laminated-ips-ready-shell-for-nintendo-game-boy-advance-modified-no-cut-housing-agb-gba-hispeedido\"\u003elaminated IPS ready shell from Hispeedido\u003c\/a\u003e for a drop-in fit. It is not compatible with the FunnyPlaying laminated shell. We do not recommend trimming your own shell – it is much more difficult than it looks, as part of the shell has to be filed \/ sanded down, not just cut, and incorrect trimming may crack or damage the display.\u003cbr\u003e\u003cbr\u003eThe kit includes the LCD panel with laminated screen lens and the ribbon cable to connect it to the mainboard. Three pieces of hook-up wire are also included for optional soldering, which adds the on-screen display (OSD) menu. All of the OSD features can be controlled with the touch pads, so the no-solder option still gives you the same pixel modes etc. as when the optional wires are fitted.\u003cbr\u003e\u003cbr\u003eThe screen upgrade supports 15 levels of brightness, 8 colour modes and 4 display modes: default, retro pixel effect and 2 scan line effects.\u003cbr\u003e\u003cbr\u003eAs with any IPS screen upgrade, we recommend good quality batteries such as Eneloop or Ladda, or fitting a LiPo battery mod, due to the higher power requirements of IPS screens.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE: Please bench test the screen before installation to check for any issues – this helps us support your warranty. Leave the adhesive backing and protective film on the product until you are satisfied it is working correctly and there are no pixel faults. If you discover any faults, please send a picture of the bench test to support@zedlabz.com for assistance.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eSoldering is optional (3 wires in total). If fitted, the wires allow brightness control from the original brightness button and give access to the OSD menu.\u003cbr\u003e\u003cbr\u003eOther items needed (not included): a Hispeedido laminated IPS ready shell, basic tools to open the Game Boy and fit the screen, and a soldering iron (optional).\u003cbr\u003e\u003cbr\u003ePlease note the LCD screen and ribbon cable are fragile and need care to install. They are also more susceptible to damage once installed if the console is dropped, and LCD screens can crack under pressure or impact. Our warranty does not cover accidental \/ user damage to any components in this kit. A \u003ca href=\"https:\/\/zedlabz.com\/products\/replacement-laminated-ips-screen-for-nintendo-game-boy-advance-screen-only-hispeedido\"\u003ereplacement screen (screen only)\u003c\/a\u003e and \u003ca href=\"https:\/\/zedlabz.com\/products\/replacement-32-40-pin-connecting-ribbon-cables-for-game-boy-advance-ips-3-0-mod-hispeedido\"\u003ereplacement ribbon cables\u003c\/a\u003e are available to purchase separately.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,SHARP,GUIDE\" data-zl-file=\"ZL-IF-HISPEEDIDO-CE-LCDKIT\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Glass – sharp if broken; handle with care.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Hispeedido · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Hispeedido","offers":[{"title":"Default Title","offer_id":48640217645308,"sku":"000871","price":57.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/laminated-ips-30-lcd-screen-kit-for-nintendo-game-boy-advance-gba-agb-dmg-grey-hispeedidohispeedido-1954022.jpg?v=1767352750"},{"product_id":"laminated-ips-3-0-lcd-screen-kit-for-nintendo-game-boy-advance-gba-agb-light-purple-hispeedido","title":"Laminated IPS 3.0 LCD screen kit for Nintendo Game Boy Advance [GBA AGB] - Light Purple | Hispeedido","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n- Laminated IPS LCD screen for Nintendo Game Boy Advance consoles.\u003cbr\u003e\n- Colour: Light Purple.\u003cbr\u003e\n- Requires the Hispeedido laminated IPS ready shell to install (not compatible with the FunnyPlaying laminated shell).\u003cbr\u003e\n- Brightness, colour and display mode touch sensors built in.\u003cbr\u003e\n- 3.0\" screen size with traditional Advance logo on the glass.\u003cbr\u003e\n- Optional 3 wires to solder for OSD menu controls.\u003cbr\u003e\u003cbr\u003e\n\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe latest Game Boy Advance laminated display from Hispeedido offers a resolution closer to the original, giving an improved appearance compared to the 480 x 320 display.\u003cbr\u003e\u003cbr\u003eThe screen has touch sensors built in, which control features such as brightness and pixel mode options.\u003cbr\u003e\u003cbr\u003eFitting this IPS screen kit is simplified thanks to the integrated design: there are no PCBs to attach, no touch sensors to solder and no screen lens to align. It is compatible with both 32-pin and 40-pin versions of the GBA console.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eShell compatibility:\u003c\/strong\u003e this screen needs a \u003ca href=\"https:\/\/zedlabz.com\/products\/laminated-ips-ready-shell-for-nintendo-game-boy-advance-modified-no-cut-housing-agb-gba-hispeedido\"\u003elaminated IPS ready shell from Hispeedido\u003c\/a\u003e for a drop-in fit. It is not compatible with the FunnyPlaying laminated shell. We do not recommend trimming your own shell – it is much more difficult than it looks, as part of the shell has to be filed \/ sanded down, not just cut, and incorrect trimming may crack or damage the display.\u003cbr\u003e\u003cbr\u003eThe kit includes the LCD panel with laminated screen lens and the ribbon cable to connect it to the mainboard. Three pieces of hook-up wire are also included for optional soldering, which adds the on-screen display (OSD) menu. All of the OSD features can be controlled with the touch pads, so the no-solder option still gives you the same pixel modes etc. as when the optional wires are fitted.\u003cbr\u003e\u003cbr\u003eThe screen upgrade supports 15 levels of brightness, 8 colour modes and 4 display modes: default, retro pixel effect and 2 scan line effects.\u003cbr\u003e\u003cbr\u003eAs with any IPS screen upgrade, we recommend good quality batteries such as Eneloop or Ladda, or fitting a LiPo battery mod, due to the higher power requirements of IPS screens.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE: Please bench test the screen before installation to check for any issues – this helps us support your warranty. Leave the adhesive backing and protective film on the product until you are satisfied it is working correctly and there are no pixel faults. If you discover any faults, please send a picture of the bench test to support@zedlabz.com for assistance.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eSoldering is optional (3 wires in total). If fitted, the wires allow brightness control from the original brightness button and give access to the OSD menu.\u003cbr\u003e\u003cbr\u003eOther items needed (not included): a Hispeedido laminated IPS ready shell, basic tools to open the Game Boy and fit the screen, and a soldering iron (optional).\u003cbr\u003e\u003cbr\u003ePlease note the LCD screen and ribbon cable are fragile and need care to install. They are also more susceptible to damage once installed if the console is dropped, and LCD screens can crack under pressure or impact. Our warranty does not cover accidental \/ user damage to any components in this kit. A \u003ca href=\"https:\/\/zedlabz.com\/products\/replacement-laminated-ips-screen-for-nintendo-game-boy-advance-screen-only-hispeedido\"\u003ereplacement screen (screen only)\u003c\/a\u003e and \u003ca href=\"https:\/\/zedlabz.com\/products\/replacement-32-40-pin-connecting-ribbon-cables-for-game-boy-advance-ips-3-0-mod-hispeedido\"\u003ereplacement ribbon cables\u003c\/a\u003e are available to purchase separately.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,SHARP,GUIDE\" data-zl-file=\"ZL-IF-HISPEEDIDO-CE-LCDKIT\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Glass – sharp if broken; handle with care.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Hispeedido · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Hispeedido","offers":[{"title":"Default Title","offer_id":68060963176700,"sku":"001176","price":57.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/laminated-ips-30-lcd-screen-kit-for-nintendo-game-boy-advance-gba-agb-light-purple-hispeedidohispeedido-6283081.jpg?v=1793743038"},{"product_id":"laminated-ips-3-0-lcd-screen-kit-for-nintendo-game-boy-advance-gba-agb-pink-hispeedido","title":"Laminated IPS 3.0 LCD screen kit for Nintendo Game Boy Advance [GBA AGB] - Pink | Hispeedido","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n- Laminated IPS LCD screen for Nintendo Game Boy Advance consoles.\u003cbr\u003e\n- Colour: Pink.\u003cbr\u003e\n- Requires the Hispeedido laminated IPS ready shell to install (not compatible with the FunnyPlaying laminated shell).\u003cbr\u003e\n- Brightness, colour and display mode touch sensors built in.\u003cbr\u003e\n- 3.0\" screen size with traditional Advance logo on the glass.\u003cbr\u003e\n- Optional 3 wires to solder for OSD menu controls.\u003cbr\u003e\u003cbr\u003e\n\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe latest Game Boy Advance laminated display from Hispeedido offers a resolution closer to the original, giving an improved appearance compared to the 480 x 320 display.\u003cbr\u003e\u003cbr\u003eThe screen has touch sensors built in, which control features such as brightness and pixel mode options.\u003cbr\u003e\u003cbr\u003eFitting this IPS screen kit is simplified thanks to the integrated design: there are no PCBs to attach, no touch sensors to solder and no screen lens to align. It is compatible with both 32-pin and 40-pin versions of the GBA console.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eShell compatibility:\u003c\/strong\u003e this screen needs a \u003ca href=\"https:\/\/zedlabz.com\/products\/laminated-ips-ready-shell-for-nintendo-game-boy-advance-modified-no-cut-housing-agb-gba-hispeedido\"\u003elaminated IPS ready shell from Hispeedido\u003c\/a\u003e for a drop-in fit. It is not compatible with the FunnyPlaying laminated shell. We do not recommend trimming your own shell – it is much more difficult than it looks, as part of the shell has to be filed \/ sanded down, not just cut, and incorrect trimming may crack or damage the display.\u003cbr\u003e\u003cbr\u003eThe kit includes the LCD panel with laminated screen lens and the ribbon cable to connect it to the mainboard. Three pieces of hook-up wire are also included for optional soldering, which adds the on-screen display (OSD) menu. All of the OSD features can be controlled with the touch pads, so the no-solder option still gives you the same pixel modes etc. as when the optional wires are fitted.\u003cbr\u003e\u003cbr\u003eThe screen upgrade supports 15 levels of brightness, 8 colour modes and 4 display modes: default, retro pixel effect and 2 scan line effects.\u003cbr\u003e\u003cbr\u003eAs with any IPS screen upgrade, we recommend good quality batteries such as Eneloop or Ladda, or fitting a LiPo battery mod, due to the higher power requirements of IPS screens.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE: Please bench test the screen before installation to check for any issues – this helps us support your warranty. Leave the adhesive backing and protective film on the product until you are satisfied it is working correctly and there are no pixel faults. If you discover any faults, please send a picture of the bench test to support@zedlabz.com for assistance.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eSoldering is optional (3 wires in total). If fitted, the wires allow brightness control from the original brightness button and give access to the OSD menu.\u003cbr\u003e\u003cbr\u003eOther items needed (not included): a Hispeedido laminated IPS ready shell, basic tools to open the Game Boy and fit the screen, and a soldering iron (optional).\u003cbr\u003e\u003cbr\u003ePlease note the LCD screen and ribbon cable are fragile and need care to install. They are also more susceptible to damage once installed if the console is dropped, and LCD screens can crack under pressure or impact. Our warranty does not cover accidental \/ user damage to any components in this kit. A \u003ca href=\"https:\/\/zedlabz.com\/products\/replacement-laminated-ips-screen-for-nintendo-game-boy-advance-screen-only-hispeedido\"\u003ereplacement screen (screen only)\u003c\/a\u003e and \u003ca href=\"https:\/\/zedlabz.com\/products\/replacement-32-40-pin-connecting-ribbon-cables-for-game-boy-advance-ips-3-0-mod-hispeedido\"\u003ereplacement ribbon cables\u003c\/a\u003e are available to purchase separately.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,SHARP,GUIDE\" data-zl-file=\"ZL-IF-HISPEEDIDO-CE-LCDKIT\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Glass – sharp if broken; handle with care.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Hispeedido · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Hispeedido","offers":[{"title":"Default Title","offer_id":68060964225276,"sku":"001175","price":57.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/laminated-ips-30-lcd-screen-kit-for-nintendo-game-boy-advance-gba-agb-pink-hispeedidohispeedido-2551617.jpg?v=1793743039"},{"product_id":"laminated-ips-3-0-lcd-screen-kit-for-nintendo-game-boy-advance-gba-agb-bright-red-hispeedido","title":"Laminated IPS 3.0 LCD screen kit for Nintendo Game Boy Advance [GBA AGB] - Bright Red | Hispeedido","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n- Laminated IPS LCD screen for Nintendo Game Boy Advance consoles.\u003cbr\u003e\n- Colour: Bright Red.\u003cbr\u003e\n- Requires the Hispeedido laminated IPS ready shell to install (not compatible with the FunnyPlaying laminated shell).\u003cbr\u003e\n- Brightness, colour and display mode touch sensors built in.\u003cbr\u003e\n- 3.0\" screen size with traditional Advance logo on the glass.\u003cbr\u003e\n- Optional 3 wires to solder for OSD menu controls.\u003cbr\u003e\u003cbr\u003e\n\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe latest Game Boy Advance laminated display from Hispeedido offers a resolution closer to the original, giving an improved appearance compared to the 480 x 320 display.\u003cbr\u003e\u003cbr\u003eThe screen has touch sensors built in, which control features such as brightness and pixel mode options.\u003cbr\u003e\u003cbr\u003eFitting this IPS screen kit is simplified thanks to the integrated design: there are no PCBs to attach, no touch sensors to solder and no screen lens to align. It is compatible with both 32-pin and 40-pin versions of the GBA console.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eShell compatibility:\u003c\/strong\u003e this screen needs a \u003ca href=\"https:\/\/zedlabz.com\/products\/laminated-ips-ready-shell-for-nintendo-game-boy-advance-modified-no-cut-housing-agb-gba-hispeedido\"\u003elaminated IPS ready shell from Hispeedido\u003c\/a\u003e for a drop-in fit. It is not compatible with the FunnyPlaying laminated shell. We do not recommend trimming your own shell – it is much more difficult than it looks, as part of the shell has to be filed \/ sanded down, not just cut, and incorrect trimming may crack or damage the display.\u003cbr\u003e\u003cbr\u003eThe kit includes the LCD panel with laminated screen lens and the ribbon cable to connect it to the mainboard. Three pieces of hook-up wire are also included for optional soldering, which adds the on-screen display (OSD) menu. All of the OSD features can be controlled with the touch pads, so the no-solder option still gives you the same pixel modes etc. as when the optional wires are fitted.\u003cbr\u003e\u003cbr\u003eThe screen upgrade supports 15 levels of brightness, 8 colour modes and 4 display modes: default, retro pixel effect and 2 scan line effects.\u003cbr\u003e\u003cbr\u003eAs with any IPS screen upgrade, we recommend good quality batteries such as Eneloop or Ladda, or fitting a LiPo battery mod, due to the higher power requirements of IPS screens.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE: Please bench test the screen before installation to check for any issues – this helps us support your warranty. Leave the adhesive backing and protective film on the product until you are satisfied it is working correctly and there are no pixel faults. If you discover any faults, please send a picture of the bench test to support@zedlabz.com for assistance.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eSoldering is optional (3 wires in total). If fitted, the wires allow brightness control from the original brightness button and give access to the OSD menu.\u003cbr\u003e\u003cbr\u003eOther items needed (not included): a Hispeedido laminated IPS ready shell, basic tools to open the Game Boy and fit the screen, and a soldering iron (optional).\u003cbr\u003e\u003cbr\u003ePlease note the LCD screen and ribbon cable are fragile and need care to install. They are also more susceptible to damage once installed if the console is dropped, and LCD screens can crack under pressure or impact. Our warranty does not cover accidental \/ user damage to any components in this kit. A \u003ca href=\"https:\/\/zedlabz.com\/products\/replacement-laminated-ips-screen-for-nintendo-game-boy-advance-screen-only-hispeedido\"\u003ereplacement screen (screen only)\u003c\/a\u003e and \u003ca href=\"https:\/\/zedlabz.com\/products\/replacement-32-40-pin-connecting-ribbon-cables-for-game-boy-advance-ips-3-0-mod-hispeedido\"\u003ereplacement ribbon cables\u003c\/a\u003e are available to purchase separately.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,SHARP,GUIDE\" data-zl-file=\"ZL-IF-HISPEEDIDO-CE-LCDKIT\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Glass – sharp if broken; handle with care.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Hispeedido · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Hispeedido","offers":[{"title":"Default Title","offer_id":68060964913404,"sku":"001174","price":57.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/laminated-ips-30-lcd-screen-kit-for-nintendo-game-boy-advance-gba-agb-bright-red-hispeedidohispeedido-5154063.jpg?v=1793743038"},{"product_id":"laminated-ips-3-0-lcd-screen-kit-for-nintendo-game-boy-advance-gba-agb-yellow-hispeedido","title":"Laminated IPS 3.0 LCD screen kit for Nintendo Game Boy Advance [GBA AGB] - Yellow | Hispeedido","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n- Laminated IPS LCD screen for Nintendo Game Boy Advance consoles.\u003cbr\u003e\n- Colour: Yellow.\u003cbr\u003e\n- Requires the Hispeedido laminated IPS ready shell to install (not compatible with the FunnyPlaying laminated shell).\u003cbr\u003e\n- Brightness, colour and display mode touch sensors built in.\u003cbr\u003e\n- 3.0\" screen size with traditional Advance logo on the glass.\u003cbr\u003e\n- Optional 3 wires to solder for OSD menu controls.\u003cbr\u003e\u003cbr\u003e\n\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe latest Game Boy Advance laminated display from Hispeedido offers a resolution closer to the original, giving an improved appearance compared to the 480 x 320 display.\u003cbr\u003e\u003cbr\u003eThe screen has touch sensors built in, which control features such as brightness and pixel mode options.\u003cbr\u003e\u003cbr\u003eFitting this IPS screen kit is simplified thanks to the integrated design: there are no PCBs to attach, no touch sensors to solder and no screen lens to align. It is compatible with both 32-pin and 40-pin versions of the GBA console.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eShell compatibility:\u003c\/strong\u003e this screen needs a \u003ca href=\"https:\/\/zedlabz.com\/products\/laminated-ips-ready-shell-for-nintendo-game-boy-advance-modified-no-cut-housing-agb-gba-hispeedido\"\u003elaminated IPS ready shell from Hispeedido\u003c\/a\u003e for a drop-in fit. It is not compatible with the FunnyPlaying laminated shell. We do not recommend trimming your own shell – it is much more difficult than it looks, as part of the shell has to be filed \/ sanded down, not just cut, and incorrect trimming may crack or damage the display.\u003cbr\u003e\u003cbr\u003eThe kit includes the LCD panel with laminated screen lens and the ribbon cable to connect it to the mainboard. Three pieces of hook-up wire are also included for optional soldering, which adds the on-screen display (OSD) menu. All of the OSD features can be controlled with the touch pads, so the no-solder option still gives you the same pixel modes etc. as when the optional wires are fitted.\u003cbr\u003e\u003cbr\u003eThe screen upgrade supports 15 levels of brightness, 8 colour modes and 4 display modes: default, retro pixel effect and 2 scan line effects.\u003cbr\u003e\u003cbr\u003eAs with any IPS screen upgrade, we recommend good quality batteries such as Eneloop or Ladda, or fitting a LiPo battery mod, due to the higher power requirements of IPS screens.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE: Please bench test the screen before installation to check for any issues – this helps us support your warranty. Leave the adhesive backing and protective film on the product until you are satisfied it is working correctly and there are no pixel faults. If you discover any faults, please send a picture of the bench test to support@zedlabz.com for assistance.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eSoldering is optional (3 wires in total). If fitted, the wires allow brightness control from the original brightness button and give access to the OSD menu.\u003cbr\u003e\u003cbr\u003eOther items needed (not included): a Hispeedido laminated IPS ready shell, basic tools to open the Game Boy and fit the screen, and a soldering iron (optional).\u003cbr\u003e\u003cbr\u003ePlease note the LCD screen and ribbon cable are fragile and need care to install. They are also more susceptible to damage once installed if the console is dropped, and LCD screens can crack under pressure or impact. Our warranty does not cover accidental \/ user damage to any components in this kit. A \u003ca href=\"https:\/\/zedlabz.com\/products\/replacement-laminated-ips-screen-for-nintendo-game-boy-advance-screen-only-hispeedido\"\u003ereplacement screen (screen only)\u003c\/a\u003e and \u003ca href=\"https:\/\/zedlabz.com\/products\/replacement-32-40-pin-connecting-ribbon-cables-for-game-boy-advance-ips-3-0-mod-hispeedido\"\u003ereplacement ribbon cables\u003c\/a\u003e are available to purchase separately.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,SHARP,GUIDE\" data-zl-file=\"ZL-IF-HISPEEDIDO-CE-LCDKIT\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Glass – sharp if broken; handle with care.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Hispeedido · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Hispeedido","offers":[{"title":"Default Title","offer_id":68060965961980,"sku":"001173","price":57.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/laminated-ips-30-lcd-screen-kit-for-nintendo-game-boy-advance-gba-agb-yellow-hispeedidohispeedido-6481548.jpg?v=1793743037"},{"product_id":"laminated-ips-3-0-lcd-screen-kit-for-nintendo-game-boy-advance-gba-agb-light-green-hispeedido","title":"Laminated IPS 3.0 LCD screen kit for Nintendo Game Boy Advance [GBA AGB] - Light Green | Hispeedido","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n- Laminated IPS LCD screen for Nintendo Game Boy Advance consoles.\u003cbr\u003e\n- Colour: Light Green.\u003cbr\u003e\n- Requires the Hispeedido laminated IPS ready shell to install (not compatible with the FunnyPlaying laminated shell).\u003cbr\u003e\n- Brightness, colour and display mode touch sensors built in.\u003cbr\u003e\n- 3.0\" screen size with traditional Advance logo on the glass.\u003cbr\u003e\n- Optional 3 wires to solder for OSD menu controls.\u003cbr\u003e\u003cbr\u003e\n\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe latest Game Boy Advance laminated display from Hispeedido offers a resolution closer to the original, giving an improved appearance compared to the 480 x 320 display.\u003cbr\u003e\u003cbr\u003eThe screen has touch sensors built in, which control features such as brightness and pixel mode options.\u003cbr\u003e\u003cbr\u003eFitting this IPS screen kit is simplified thanks to the integrated design: there are no PCBs to attach, no touch sensors to solder and no screen lens to align. It is compatible with both 32-pin and 40-pin versions of the GBA console.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eShell compatibility:\u003c\/strong\u003e this screen needs a \u003ca href=\"https:\/\/zedlabz.com\/products\/laminated-ips-ready-shell-for-nintendo-game-boy-advance-modified-no-cut-housing-agb-gba-hispeedido\"\u003elaminated IPS ready shell from Hispeedido\u003c\/a\u003e for a drop-in fit. It is not compatible with the FunnyPlaying laminated shell. We do not recommend trimming your own shell – it is much more difficult than it looks, as part of the shell has to be filed \/ sanded down, not just cut, and incorrect trimming may crack or damage the display.\u003cbr\u003e\u003cbr\u003eThe kit includes the LCD panel with laminated screen lens and the ribbon cable to connect it to the mainboard. Three pieces of hook-up wire are also included for optional soldering, which adds the on-screen display (OSD) menu. All of the OSD features can be controlled with the touch pads, so the no-solder option still gives you the same pixel modes etc. as when the optional wires are fitted.\u003cbr\u003e\u003cbr\u003eThe screen upgrade supports 15 levels of brightness, 8 colour modes and 4 display modes: default, retro pixel effect and 2 scan line effects.\u003cbr\u003e\u003cbr\u003eAs with any IPS screen upgrade, we recommend good quality batteries such as Eneloop or Ladda, or fitting a LiPo battery mod, due to the higher power requirements of IPS screens.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE: Please bench test the screen before installation to check for any issues – this helps us support your warranty. Leave the adhesive backing and protective film on the product until you are satisfied it is working correctly and there are no pixel faults. If you discover any faults, please send a picture of the bench test to support@zedlabz.com for assistance.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eSoldering is optional (3 wires in total). If fitted, the wires allow brightness control from the original brightness button and give access to the OSD menu.\u003cbr\u003e\u003cbr\u003eOther items needed (not included): a Hispeedido laminated IPS ready shell, basic tools to open the Game Boy and fit the screen, and a soldering iron (optional).\u003cbr\u003e\u003cbr\u003ePlease note the LCD screen and ribbon cable are fragile and need care to install. They are also more susceptible to damage once installed if the console is dropped, and LCD screens can crack under pressure or impact. Our warranty does not cover accidental \/ user damage to any components in this kit. A \u003ca href=\"https:\/\/zedlabz.com\/products\/replacement-laminated-ips-screen-for-nintendo-game-boy-advance-screen-only-hispeedido\"\u003ereplacement screen (screen only)\u003c\/a\u003e and \u003ca href=\"https:\/\/zedlabz.com\/products\/replacement-32-40-pin-connecting-ribbon-cables-for-game-boy-advance-ips-3-0-mod-hispeedido\"\u003ereplacement ribbon cables\u003c\/a\u003e are available to purchase separately.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,SHARP,GUIDE\" data-zl-file=\"ZL-IF-HISPEEDIDO-CE-LCDKIT\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Glass – sharp if broken; handle with care.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Hispeedido · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Hispeedido","offers":[{"title":"Default Title","offer_id":68060966289660,"sku":"001172","price":57.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/laminated-ips-30-lcd-screen-kit-for-nintendo-game-boy-advance-gba-agb-light-green-hispeedidohispeedido-8326846.jpg?v=1793743037"},{"product_id":"laminated-ips-3-0-lcd-screen-kit-for-nintendo-game-boy-advance-gba-agb-teal-hispeedido","title":"Laminated IPS 3.0 LCD screen kit for Nintendo Game Boy Advance [GBA AGB] - Teal | Hispeedido","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n- Laminated IPS LCD screen for Nintendo Game Boy Advance consoles.\u003cbr\u003e\n- Colour: Teal.\u003cbr\u003e\n- Requires the Hispeedido laminated IPS ready shell to install (not compatible with the FunnyPlaying laminated shell).\u003cbr\u003e\n- Brightness, colour and display mode touch sensors built in.\u003cbr\u003e\n- 3.0\" screen size with traditional Advance logo on the glass.\u003cbr\u003e\n- Optional 3 wires to solder for OSD menu controls.\u003cbr\u003e\u003cbr\u003e\n\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe latest Game Boy Advance laminated display from Hispeedido offers a resolution closer to the original, giving an improved appearance compared to the 480 x 320 display.\u003cbr\u003e\u003cbr\u003eThe screen has touch sensors built in, which control features such as brightness and pixel mode options.\u003cbr\u003e\u003cbr\u003eFitting this IPS screen kit is simplified thanks to the integrated design: there are no PCBs to attach, no touch sensors to solder and no screen lens to align. It is compatible with both 32-pin and 40-pin versions of the GBA console.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eShell compatibility:\u003c\/strong\u003e this screen needs a \u003ca href=\"https:\/\/zedlabz.com\/products\/laminated-ips-ready-shell-for-nintendo-game-boy-advance-modified-no-cut-housing-agb-gba-hispeedido\"\u003elaminated IPS ready shell from Hispeedido\u003c\/a\u003e for a drop-in fit. It is not compatible with the FunnyPlaying laminated shell. We do not recommend trimming your own shell – it is much more difficult than it looks, as part of the shell has to be filed \/ sanded down, not just cut, and incorrect trimming may crack or damage the display.\u003cbr\u003e\u003cbr\u003eThe kit includes the LCD panel with laminated screen lens and the ribbon cable to connect it to the mainboard. Three pieces of hook-up wire are also included for optional soldering, which adds the on-screen display (OSD) menu. All of the OSD features can be controlled with the touch pads, so the no-solder option still gives you the same pixel modes etc. as when the optional wires are fitted.\u003cbr\u003e\u003cbr\u003eThe screen upgrade supports 15 levels of brightness, 8 colour modes and 4 display modes: default, retro pixel effect and 2 scan line effects.\u003cbr\u003e\u003cbr\u003eAs with any IPS screen upgrade, we recommend good quality batteries such as Eneloop or Ladda, or fitting a LiPo battery mod, due to the higher power requirements of IPS screens.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE: Please bench test the screen before installation to check for any issues – this helps us support your warranty. Leave the adhesive backing and protective film on the product until you are satisfied it is working correctly and there are no pixel faults. If you discover any faults, please send a picture of the bench test to support@zedlabz.com for assistance.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eSoldering is optional (3 wires in total). If fitted, the wires allow brightness control from the original brightness button and give access to the OSD menu.\u003cbr\u003e\u003cbr\u003eOther items needed (not included): a Hispeedido laminated IPS ready shell, basic tools to open the Game Boy and fit the screen, and a soldering iron (optional).\u003cbr\u003e\u003cbr\u003ePlease note the LCD screen and ribbon cable are fragile and need care to install. They are also more susceptible to damage once installed if the console is dropped, and LCD screens can crack under pressure or impact. Our warranty does not cover accidental \/ user damage to any components in this kit. A \u003ca href=\"https:\/\/zedlabz.com\/products\/replacement-laminated-ips-screen-for-nintendo-game-boy-advance-screen-only-hispeedido\"\u003ereplacement screen (screen only)\u003c\/a\u003e and \u003ca href=\"https:\/\/zedlabz.com\/products\/replacement-32-40-pin-connecting-ribbon-cables-for-game-boy-advance-ips-3-0-mod-hispeedido\"\u003ereplacement ribbon cables\u003c\/a\u003e are available to purchase separately.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,SHARP,GUIDE\" data-zl-file=\"ZL-IF-HISPEEDIDO-CE-LCDKIT\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Glass – sharp if broken; handle with care.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Hispeedido · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Hispeedido","offers":[{"title":"Default Title","offer_id":68060967010556,"sku":"001171","price":57.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/laminated-ips-30-lcd-screen-kit-for-nintendo-game-boy-advance-gba-agb-teal-hispeedidohispeedido-1662888.jpg?v=1793743037"},{"product_id":"laminated-ips-3-0-lcd-screen-kit-for-nintendo-game-boy-advance-gba-agb-glacier-hispeedido","title":"Laminated IPS 3.0 LCD screen kit for Nintendo Game Boy Advance [GBA AGB] - Glacier | Hispeedido","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n- Laminated IPS LCD screen for Nintendo Game Boy Advance consoles.\u003cbr\u003e\n- Colour: Glacier.\u003cbr\u003e\n- Requires the Hispeedido laminated IPS ready shell to install (not compatible with the FunnyPlaying laminated shell).\u003cbr\u003e\n- Brightness, colour and display mode touch sensors built in.\u003cbr\u003e\n- 3.0\" screen size with traditional Advance logo on the glass.\u003cbr\u003e\n- Optional 3 wires to solder for OSD menu controls.\u003cbr\u003e\u003cbr\u003e\n\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe latest Game Boy Advance laminated display from Hispeedido offers a resolution closer to the original, giving an improved appearance compared to the 480 x 320 display.\u003cbr\u003e\u003cbr\u003eThe screen has touch sensors built in, which control features such as brightness and pixel mode options.\u003cbr\u003e\u003cbr\u003eFitting this IPS screen kit is simplified thanks to the integrated design: there are no PCBs to attach, no touch sensors to solder and no screen lens to align. It is compatible with both 32-pin and 40-pin versions of the GBA console.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eShell compatibility:\u003c\/strong\u003e this screen needs a \u003ca href=\"https:\/\/zedlabz.com\/products\/laminated-ips-ready-shell-for-nintendo-game-boy-advance-modified-no-cut-housing-agb-gba-hispeedido\"\u003elaminated IPS ready shell from Hispeedido\u003c\/a\u003e for a drop-in fit. It is not compatible with the FunnyPlaying laminated shell. We do not recommend trimming your own shell – it is much more difficult than it looks, as part of the shell has to be filed \/ sanded down, not just cut, and incorrect trimming may crack or damage the display.\u003cbr\u003e\u003cbr\u003eThe kit includes the LCD panel with laminated screen lens and the ribbon cable to connect it to the mainboard. Three pieces of hook-up wire are also included for optional soldering, which adds the on-screen display (OSD) menu. All of the OSD features can be controlled with the touch pads, so the no-solder option still gives you the same pixel modes etc. as when the optional wires are fitted.\u003cbr\u003e\u003cbr\u003eThe screen upgrade supports 15 levels of brightness, 8 colour modes and 4 display modes: default, retro pixel effect and 2 scan line effects.\u003cbr\u003e\u003cbr\u003eAs with any IPS screen upgrade, we recommend good quality batteries such as Eneloop or Ladda, or fitting a LiPo battery mod, due to the higher power requirements of IPS screens.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE: Please bench test the screen before installation to check for any issues – this helps us support your warranty. Leave the adhesive backing and protective film on the product until you are satisfied it is working correctly and there are no pixel faults. If you discover any faults, please send a picture of the bench test to support@zedlabz.com for assistance.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eSoldering is optional (3 wires in total). If fitted, the wires allow brightness control from the original brightness button and give access to the OSD menu.\u003cbr\u003e\u003cbr\u003eOther items needed (not included): a Hispeedido laminated IPS ready shell, basic tools to open the Game Boy and fit the screen, and a soldering iron (optional).\u003cbr\u003e\u003cbr\u003ePlease note the LCD screen and ribbon cable are fragile and need care to install. They are also more susceptible to damage once installed if the console is dropped, and LCD screens can crack under pressure or impact. Our warranty does not cover accidental \/ user damage to any components in this kit. A \u003ca href=\"https:\/\/zedlabz.com\/products\/replacement-laminated-ips-screen-for-nintendo-game-boy-advance-screen-only-hispeedido\"\u003ereplacement screen (screen only)\u003c\/a\u003e and \u003ca href=\"https:\/\/zedlabz.com\/products\/replacement-32-40-pin-connecting-ribbon-cables-for-game-boy-advance-ips-3-0-mod-hispeedido\"\u003ereplacement ribbon cables\u003c\/a\u003e are available to purchase separately.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,SHARP,GUIDE\" data-zl-file=\"ZL-IF-HISPEEDIDO-CE-LCDKIT\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Glass – sharp if broken; handle with care.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Hispeedido · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Hispeedido","offers":[{"title":"Default Title","offer_id":68060967665916,"sku":"001170","price":57.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/laminated-ips-30-lcd-screen-kit-for-nintendo-game-boy-advance-gba-agb-glacier-hispeedidohispeedido-4607167.jpg?v=1793743036"},{"product_id":"laminated-ips-3-0-lcd-screen-kit-for-nintendo-game-boy-advance-gba-agb-purple-blue-hispeedido","title":"Laminated IPS 3.0 LCD screen kit for Nintendo Game Boy Advance [GBA AGB] - Purple Blue | Hispeedido","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n- Laminated IPS LCD screen for Nintendo Game Boy Advance consoles.\u003cbr\u003e\n- Colour: Purple Blue.\u003cbr\u003e\n- Requires the Hispeedido laminated IPS ready shell to install (not compatible with the FunnyPlaying laminated shell).\u003cbr\u003e\n- Brightness, colour and display mode touch sensors built in.\u003cbr\u003e\n- 3.0\" screen size with traditional Advance logo on the glass.\u003cbr\u003e\n- Optional 3 wires to solder for OSD menu controls.\u003cbr\u003e\u003cbr\u003e\n\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe latest Game Boy Advance laminated display from Hispeedido offers a resolution closer to the original, giving an improved appearance compared to the 480 x 320 display.\u003cbr\u003e\u003cbr\u003eThe screen has touch sensors built in, which control features such as brightness and pixel mode options.\u003cbr\u003e\u003cbr\u003eFitting this IPS screen kit is simplified thanks to the integrated design: there are no PCBs to attach, no touch sensors to solder and no screen lens to align. It is compatible with both 32-pin and 40-pin versions of the GBA console.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eShell compatibility:\u003c\/strong\u003e this screen needs a \u003ca href=\"https:\/\/zedlabz.com\/products\/laminated-ips-ready-shell-for-nintendo-game-boy-advance-modified-no-cut-housing-agb-gba-hispeedido\"\u003elaminated IPS ready shell from Hispeedido\u003c\/a\u003e for a drop-in fit. It is not compatible with the FunnyPlaying laminated shell. We do not recommend trimming your own shell – it is much more difficult than it looks, as part of the shell has to be filed \/ sanded down, not just cut, and incorrect trimming may crack or damage the display.\u003cbr\u003e\u003cbr\u003eThe kit includes the LCD panel with laminated screen lens and the ribbon cable to connect it to the mainboard. Three pieces of hook-up wire are also included for optional soldering, which adds the on-screen display (OSD) menu. All of the OSD features can be controlled with the touch pads, so the no-solder option still gives you the same pixel modes etc. as when the optional wires are fitted.\u003cbr\u003e\u003cbr\u003eThe screen upgrade supports 15 levels of brightness, 8 colour modes and 4 display modes: default, retro pixel effect and 2 scan line effects.\u003cbr\u003e\u003cbr\u003eAs with any IPS screen upgrade, we recommend good quality batteries such as Eneloop or Ladda, or fitting a LiPo battery mod, due to the higher power requirements of IPS screens.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE: Please bench test the screen before installation to check for any issues – this helps us support your warranty. Leave the adhesive backing and protective film on the product until you are satisfied it is working correctly and there are no pixel faults. If you discover any faults, please send a picture of the bench test to support@zedlabz.com for assistance.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eSoldering is optional (3 wires in total). If fitted, the wires allow brightness control from the original brightness button and give access to the OSD menu.\u003cbr\u003e\u003cbr\u003eOther items needed (not included): a Hispeedido laminated IPS ready shell, basic tools to open the Game Boy and fit the screen, and a soldering iron (optional).\u003cbr\u003e\u003cbr\u003ePlease note the LCD screen and ribbon cable are fragile and need care to install. They are also more susceptible to damage once installed if the console is dropped, and LCD screens can crack under pressure or impact. Our warranty does not cover accidental \/ user damage to any components in this kit. A \u003ca href=\"https:\/\/zedlabz.com\/products\/replacement-laminated-ips-screen-for-nintendo-game-boy-advance-screen-only-hispeedido\"\u003ereplacement screen (screen only)\u003c\/a\u003e and \u003ca href=\"https:\/\/zedlabz.com\/products\/replacement-32-40-pin-connecting-ribbon-cables-for-game-boy-advance-ips-3-0-mod-hispeedido\"\u003ereplacement ribbon cables\u003c\/a\u003e are available to purchase separately.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,SHARP,GUIDE\" data-zl-file=\"ZL-IF-HISPEEDIDO-CE-LCDKIT\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Glass – sharp if broken; handle with care.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Hispeedido · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Hispeedido","offers":[{"title":"Default Title","offer_id":68060968354044,"sku":"001169","price":57.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/laminated-ips-30-lcd-screen-kit-for-nintendo-game-boy-advance-gba-agb-purple-blue-hispeedidohispeedido-1212675.jpg?v=1793743036"},{"product_id":"laminated-ips-3-0-lcd-screen-kit-for-nintendo-game-boy-advance-gba-agb-dark-blue-hispeedido","title":"Laminated IPS 3.0 LCD screen kit for Nintendo Game Boy Advance [GBA AGB] - Dark Blue | Hispeedido","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n- Laminated IPS LCD screen for Nintendo Game Boy Advance consoles.\u003cbr\u003e\n- Colour: Dark Blue.\u003cbr\u003e\n- Requires the Hispeedido laminated IPS ready shell to install (not compatible with the FunnyPlaying laminated shell).\u003cbr\u003e\n- Brightness, colour and display mode touch sensors built in.\u003cbr\u003e\n- 3.0\" screen size with traditional Advance logo on the glass.\u003cbr\u003e\n- Optional 3 wires to solder for OSD menu controls.\u003cbr\u003e\u003cbr\u003e\n\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe latest Game Boy Advance laminated display from Hispeedido offers a resolution closer to the original, giving an improved appearance compared to the 480 x 320 display.\u003cbr\u003e\u003cbr\u003eThe screen has touch sensors built in, which control features such as brightness and pixel mode options.\u003cbr\u003e\u003cbr\u003eFitting this IPS screen kit is simplified thanks to the integrated design: there are no PCBs to attach, no touch sensors to solder and no screen lens to align. It is compatible with both 32-pin and 40-pin versions of the GBA console.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eShell compatibility:\u003c\/strong\u003e this screen needs a \u003ca href=\"https:\/\/zedlabz.com\/products\/laminated-ips-ready-shell-for-nintendo-game-boy-advance-modified-no-cut-housing-agb-gba-hispeedido\"\u003elaminated IPS ready shell from Hispeedido\u003c\/a\u003e for a drop-in fit. It is not compatible with the FunnyPlaying laminated shell. We do not recommend trimming your own shell – it is much more difficult than it looks, as part of the shell has to be filed \/ sanded down, not just cut, and incorrect trimming may crack or damage the display.\u003cbr\u003e\u003cbr\u003eThe kit includes the LCD panel with laminated screen lens and the ribbon cable to connect it to the mainboard. Three pieces of hook-up wire are also included for optional soldering, which adds the on-screen display (OSD) menu. All of the OSD features can be controlled with the touch pads, so the no-solder option still gives you the same pixel modes etc. as when the optional wires are fitted.\u003cbr\u003e\u003cbr\u003eThe screen upgrade supports 15 levels of brightness, 8 colour modes and 4 display modes: default, retro pixel effect and 2 scan line effects.\u003cbr\u003e\u003cbr\u003eAs with any IPS screen upgrade, we recommend good quality batteries such as Eneloop or Ladda, or fitting a LiPo battery mod, due to the higher power requirements of IPS screens.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE: Please bench test the screen before installation to check for any issues – this helps us support your warranty. Leave the adhesive backing and protective film on the product until you are satisfied it is working correctly and there are no pixel faults. If you discover any faults, please send a picture of the bench test to support@zedlabz.com for assistance.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eSoldering is optional (3 wires in total). If fitted, the wires allow brightness control from the original brightness button and give access to the OSD menu.\u003cbr\u003e\u003cbr\u003eOther items needed (not included): a Hispeedido laminated IPS ready shell, basic tools to open the Game Boy and fit the screen, and a soldering iron (optional).\u003cbr\u003e\u003cbr\u003ePlease note the LCD screen and ribbon cable are fragile and need care to install. They are also more susceptible to damage once installed if the console is dropped, and LCD screens can crack under pressure or impact. Our warranty does not cover accidental \/ user damage to any components in this kit. A \u003ca href=\"https:\/\/zedlabz.com\/products\/replacement-laminated-ips-screen-for-nintendo-game-boy-advance-screen-only-hispeedido\"\u003ereplacement screen (screen only)\u003c\/a\u003e and \u003ca href=\"https:\/\/zedlabz.com\/products\/replacement-32-40-pin-connecting-ribbon-cables-for-game-boy-advance-ips-3-0-mod-hispeedido\"\u003ereplacement ribbon cables\u003c\/a\u003e are available to purchase separately.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,SHARP,GUIDE\" data-zl-file=\"ZL-IF-HISPEEDIDO-CE-LCDKIT\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Glass – sharp if broken; handle with care.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Hispeedido · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Hispeedido","offers":[{"title":"Default Title","offer_id":68060968976636,"sku":"001168","price":57.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/laminated-ips-30-lcd-screen-kit-for-nintendo-game-boy-advance-gba-agb-dark-blue-hispeedidohispeedido-5517171.jpg?v=1793743037"},{"product_id":"laminated-ips-3-0-lcd-screen-kit-for-nintendo-game-boy-advance-gba-agb-sky-blue-hispeedido","title":"Laminated IPS 3.0 LCD screen kit for Nintendo Game Boy Advance [GBA AGB] - Sky Blue | Hispeedido","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n- Laminated IPS LCD screen for Nintendo Game Boy Advance consoles.\u003cbr\u003e\n- Colour: Sky Blue.\u003cbr\u003e\n- Requires the Hispeedido laminated IPS ready shell to install (not compatible with the FunnyPlaying laminated shell).\u003cbr\u003e\n- Brightness, colour and display mode touch sensors built in.\u003cbr\u003e\n- 3.0\" screen size with traditional Advance logo on the glass.\u003cbr\u003e\n- Optional 3 wires to solder for OSD menu controls.\u003cbr\u003e\u003cbr\u003e\n\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe latest Game Boy Advance laminated display from Hispeedido offers a resolution closer to the original, giving an improved appearance compared to the 480 x 320 display.\u003cbr\u003e\u003cbr\u003eThe screen has touch sensors built in, which control features such as brightness and pixel mode options.\u003cbr\u003e\u003cbr\u003eFitting this IPS screen kit is simplified thanks to the integrated design: there are no PCBs to attach, no touch sensors to solder and no screen lens to align. It is compatible with both 32-pin and 40-pin versions of the GBA console.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eShell compatibility:\u003c\/strong\u003e this screen needs a \u003ca href=\"https:\/\/zedlabz.com\/products\/laminated-ips-ready-shell-for-nintendo-game-boy-advance-modified-no-cut-housing-agb-gba-hispeedido\"\u003elaminated IPS ready shell from Hispeedido\u003c\/a\u003e for a drop-in fit. It is not compatible with the FunnyPlaying laminated shell. We do not recommend trimming your own shell – it is much more difficult than it looks, as part of the shell has to be filed \/ sanded down, not just cut, and incorrect trimming may crack or damage the display.\u003cbr\u003e\u003cbr\u003eThe kit includes the LCD panel with laminated screen lens and the ribbon cable to connect it to the mainboard. Three pieces of hook-up wire are also included for optional soldering, which adds the on-screen display (OSD) menu. All of the OSD features can be controlled with the touch pads, so the no-solder option still gives you the same pixel modes etc. as when the optional wires are fitted.\u003cbr\u003e\u003cbr\u003eThe screen upgrade supports 15 levels of brightness, 8 colour modes and 4 display modes: default, retro pixel effect and 2 scan line effects.\u003cbr\u003e\u003cbr\u003eAs with any IPS screen upgrade, we recommend good quality batteries such as Eneloop or Ladda, or fitting a LiPo battery mod, due to the higher power requirements of IPS screens.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE: Please bench test the screen before installation to check for any issues – this helps us support your warranty. Leave the adhesive backing and protective film on the product until you are satisfied it is working correctly and there are no pixel faults. If you discover any faults, please send a picture of the bench test to support@zedlabz.com for assistance.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eSoldering is optional (3 wires in total). If fitted, the wires allow brightness control from the original brightness button and give access to the OSD menu.\u003cbr\u003e\u003cbr\u003eOther items needed (not included): a Hispeedido laminated IPS ready shell, basic tools to open the Game Boy and fit the screen, and a soldering iron (optional).\u003cbr\u003e\u003cbr\u003ePlease note the LCD screen and ribbon cable are fragile and need care to install. They are also more susceptible to damage once installed if the console is dropped, and LCD screens can crack under pressure or impact. Our warranty does not cover accidental \/ user damage to any components in this kit. A \u003ca href=\"https:\/\/zedlabz.com\/products\/replacement-laminated-ips-screen-for-nintendo-game-boy-advance-screen-only-hispeedido\"\u003ereplacement screen (screen only)\u003c\/a\u003e and \u003ca href=\"https:\/\/zedlabz.com\/products\/replacement-32-40-pin-connecting-ribbon-cables-for-game-boy-advance-ips-3-0-mod-hispeedido\"\u003ereplacement ribbon cables\u003c\/a\u003e are available to purchase separately.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,SHARP,GUIDE\" data-zl-file=\"ZL-IF-HISPEEDIDO-CE-LCDKIT\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Glass – sharp if broken; handle with care.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Hispeedido · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Hispeedido","offers":[{"title":"Default Title","offer_id":68060969500924,"sku":"001167","price":57.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/laminated-ips-30-lcd-screen-kit-for-nintendo-game-boy-advance-gba-agb-sky-blue-hispeedidohispeedido-3039208.jpg?v=1793743036"},{"product_id":"laminated-ips-3-0-lcd-screen-kit-for-nintendo-game-boy-advance-gba-agb-light-blue-hispeedido","title":"Laminated IPS 3.0 LCD screen kit for Nintendo Game Boy Advance [GBA AGB] - Light Blue | Hispeedido","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n- Laminated IPS LCD screen for Nintendo Game Boy Advance consoles.\u003cbr\u003e\n- Colour: Light Blue.\u003cbr\u003e\n- Requires the Hispeedido laminated IPS ready shell to install (not compatible with the FunnyPlaying laminated shell).\u003cbr\u003e\n- Brightness, colour and display mode touch sensors built in.\u003cbr\u003e\n- 3.0\" screen size with traditional Advance logo on the glass.\u003cbr\u003e\n- Optional 3 wires to solder for OSD menu controls.\u003cbr\u003e\u003cbr\u003e\n\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe latest Game Boy Advance laminated display from Hispeedido offers a resolution closer to the original, giving an improved appearance compared to the 480 x 320 display.\u003cbr\u003e\u003cbr\u003eThe screen has touch sensors built in, which control features such as brightness and pixel mode options.\u003cbr\u003e\u003cbr\u003eFitting this IPS screen kit is simplified thanks to the integrated design: there are no PCBs to attach, no touch sensors to solder and no screen lens to align. It is compatible with both 32-pin and 40-pin versions of the GBA console.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eShell compatibility:\u003c\/strong\u003e this screen needs a \u003ca href=\"https:\/\/zedlabz.com\/products\/laminated-ips-ready-shell-for-nintendo-game-boy-advance-modified-no-cut-housing-agb-gba-hispeedido\"\u003elaminated IPS ready shell from Hispeedido\u003c\/a\u003e for a drop-in fit. It is not compatible with the FunnyPlaying laminated shell. We do not recommend trimming your own shell – it is much more difficult than it looks, as part of the shell has to be filed \/ sanded down, not just cut, and incorrect trimming may crack or damage the display.\u003cbr\u003e\u003cbr\u003eThe kit includes the LCD panel with laminated screen lens and the ribbon cable to connect it to the mainboard. Three pieces of hook-up wire are also included for optional soldering, which adds the on-screen display (OSD) menu. All of the OSD features can be controlled with the touch pads, so the no-solder option still gives you the same pixel modes etc. as when the optional wires are fitted.\u003cbr\u003e\u003cbr\u003eThe screen upgrade supports 15 levels of brightness, 8 colour modes and 4 display modes: default, retro pixel effect and 2 scan line effects.\u003cbr\u003e\u003cbr\u003eAs with any IPS screen upgrade, we recommend good quality batteries such as Eneloop or Ladda, or fitting a LiPo battery mod, due to the higher power requirements of IPS screens.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE: Please bench test the screen before installation to check for any issues – this helps us support your warranty. Leave the adhesive backing and protective film on the product until you are satisfied it is working correctly and there are no pixel faults. If you discover any faults, please send a picture of the bench test to support@zedlabz.com for assistance.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eSoldering is optional (3 wires in total). If fitted, the wires allow brightness control from the original brightness button and give access to the OSD menu.\u003cbr\u003e\u003cbr\u003eOther items needed (not included): a Hispeedido laminated IPS ready shell, basic tools to open the Game Boy and fit the screen, and a soldering iron (optional).\u003cbr\u003e\u003cbr\u003ePlease note the LCD screen and ribbon cable are fragile and need care to install. They are also more susceptible to damage once installed if the console is dropped, and LCD screens can crack under pressure or impact. Our warranty does not cover accidental \/ user damage to any components in this kit. A \u003ca href=\"https:\/\/zedlabz.com\/products\/replacement-laminated-ips-screen-for-nintendo-game-boy-advance-screen-only-hispeedido\"\u003ereplacement screen (screen only)\u003c\/a\u003e and \u003ca href=\"https:\/\/zedlabz.com\/products\/replacement-32-40-pin-connecting-ribbon-cables-for-game-boy-advance-ips-3-0-mod-hispeedido\"\u003ereplacement ribbon cables\u003c\/a\u003e are available to purchase separately.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,SHARP,GUIDE\" data-zl-file=\"ZL-IF-HISPEEDIDO-CE-LCDKIT\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Glass – sharp if broken; handle with care.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Hispeedido · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Hispeedido","offers":[{"title":"Default Title","offer_id":68060970090748,"sku":"001166","price":57.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/laminated-ips-30-lcd-screen-kit-for-nintendo-game-boy-advance-gba-agb-light-blue-hispeedidohispeedido-6762000.jpg?v=1793743033"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/collections\/laminated-ips-30-lcd-screen-kit-for-nintendo-game-boy-advance-gba-agb-teal-hispeedidohispeedido-1662888.jpg?v=1795076373","url":"https:\/\/www.zedlabz.com\/en-au\/collections\/hispeedido-laminated-ips-screens-shells-for-game-boy-advance.oembed","provider":"ZedLabz","version":"1.0","type":"link"}