{"product_id":"usb-c-power-supply-replacement-for-sony-ps1-robot-retro","title":"USB C Power supply replacement for Sony PS1 fat console PSU power board | Robot retro","description":"\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Drop-in USB-C PSU Replacement - simply install and play.\u003cbr\u003e- Universal Compatibility - Works with all regions\u003cbr\u003e- High Efficiency \u0026amp; Low Noise - Delivers up to 96% efficiency at typical loads.\u003cbr\u003e- Fan Support - Includes 5V fan headers for improved cooling options.\u003cbr\u003e\u003cdiv\u003e- Customizable Power LED\u003cbr\u003e- Requires compatible USB-C power plug (not included)\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eRevive your classic fat PlayStation 1 PAL, NTSC, or Japanese console with this elegant, solder free USB-C power board by RobotRetro. A sleek and safe replacement that upgrades performance while preserving that authentic gaming experience.\u003cbr\u003e\u003cbr\u003eThe replacement board drops into place with plug and play installation.\u003cbr\u003e\u003cbr\u003eWorks with all PS1 models (PAL, NTSC, Japanese), xStation, MemCard Pro, and more.  Supports both 5-pin and 7-pin connectors for full revision coverage of the original “Fat” PS1 console.\u003cbr\u003e\u003cbr\u003eDelivers up to 96% efficiency at typical loads. Ripple tested at ±5mV across all voltage rails for low noise and minimal heat generation.\u003cbr\u003e\u003cbr\u003eNot compatible with PS1 slim.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWhat Sets the robot_retro Power Board Apart:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePowered by USB-C PD (Power Delivery)\u003c\/b\u003e - Compatible with 15V or 20V PD chargers. Most 30W USB-C adapters will work, including models from Anker, Dell, uGreen, and the official Nintendo Switch charger.\u003cbr\u003eRecommended: uGreen Nexode Mini 30W or Nintendo Switch Power Supply for optimal quality and value.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eOEM-Matched Reset Logic\u003c\/b\u003e - Power-on delay timing matches the original Sony board to ensure flawless performance and compatibility.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSafe and Reliable\u003c\/b\u003e - Built-in protection against overvoltage and includes a fused input for peace of mind.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eRegion Protection - \u003c\/b\u003ePrevents damage caused by incorrect mains voltage (e.g., plugging 240V into a 110V system).\u003cbr\u003eAesthetic Touch\u003cbr\u003e\u003cbr\u003e\u003cb\u003eInstall spacer included\u003c\/b\u003e - Comes with a grey 3D-printed spacer. Additional colours available via downloadable STL files.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eInstallation:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eA Phillips #2 screwdriver is recommended for the install.\u003cbr\u003e\u003cbr\u003e1) Unscrew the six screws on the bottom of your PS1 (see photo).\u003cbr\u003e2) Remove the top lid and unscrew the two power board screws.\u003cbr\u003e3) Fit the robot_retro board in the same position as the original power board.\u003cbr\u003e4) Install the provided 3D-printed spacer and replace the two power board screws.\u003cbr\u003e5) Reassemble your console.\u003cbr\u003e\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"MAINS,GUIDE\" data-zl-file=\"ZL-IF-ROBOTRETRO\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e- Mains power unit inside – unplug before work; never open it.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Robot Retro · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Robot Retro","offers":[{"title":"Default Title","offer_id":48074802430204,"sku":"000960","price":71.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/usb-c-power-supply-replacement-for-sony-ps1-fat-console-psu-power-board-robot-retrorobot-retro-4977200.jpg?v=1757171623","url":"https:\/\/www.zedlabz.com\/en-au\/products\/usb-c-power-supply-replacement-for-sony-ps1-robot-retro","provider":"ZedLabz","version":"1.0","type":"link"}