{"title":"IPS Screens \u0026 Display Mods for Game Boy Color","description":"\u003cp\u003eUpgrade your Game Boy Color (CGB-001) with a brighter, sharper screen. Shop IPS and laminated LCD screen kits, backlight mods, polarisers and replacement screens, plus the ribbon cables and brackets that go with them. IPS kits bring vivid colour, adjustable brightness and better viewing angles; check whether a kit needs shell trimming or a specific screen lens before ordering.\u003c\/p\u003e","products":[{"product_id":"ips-lcd-screen-for-nintendo-game-boy-advance-color-3-19-console-modding-repair-internal-replacement-screen-only-zedlabz","title":"IPS LCD screen for Nintendo Game Boy Advance \u0026 Color 3.19\" console modding repair internal replacement (screen only) | ZedLabz","description":"\u003cstrong\u003eFeatures:\r\n\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\r\n- IPS LCD screen Nintendo Game Boy modding\u003cbr\u003e\r\n- Ideal replacement for damaged screens or to use with your own ribbon.\u003cbr\u003e\r\n- LG Branded 3.19\" screen size.\u003cbr\u003e- LCD screen only, no ribbon cables or other parts included.\u003cbr\u003e\r\n- Requires console housing modification and technical installation.\u003cbr\u003e\u003cbr\u003e\r\n\u003cstrong\u003eDescription:\r\n\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eUse this LCD screen for Game Boy modding projects or to replace a damaged IPS LCD screen. This screen is found in the V2 GBA IPS kit from Funnyplaying, it is also found in the older Game Boy Color IPS kits.\u003cbr\u003e\u003cbr\u003eThis screen is also the same screen used for the GBA SP but this is without the laminated glass, so if your looking to do your SP in a more custom way with different glass it is possible to use this screen and adhere it to your own choice of glass lens.\u003cbr\u003e\u003cbr\u003e3.19\" diameter.\u003cbr\u003eDimensions in CM: 52.5(H) x 73.63(W) x 1.6(D)\u003cbr\u003eColor Depth: 24bit RGB 8,8,8\u003cbr\u003eInterface: MIPI 1 lane command mode\u003cbr\u003ePower usage: 274mW with backlight @ 10mA\u003cbr\u003eLuminance: 350nit @10mA\u003cbr\u003e\u003cbr\u003eNo other parts included, LCD screen only.\u003cbr\u003e\u003cbr\u003eYou will need an adapter ribbon cable to install this screen into a Game boy console (not included)\u003cbr\u003e\u003cbr\u003ePlease note that LCD screens require care to install and are fragile in nature, they are also more susceptible to damage once installed if the console is dropped, LCD screens can crack under pressure or with a impact, our warranty does not cover accidental \/ user damage of any components.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SHARP,GUIDE\" data-zl-file=\"ZL-TF-SCREEN-S99-005\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e- Glass – sharp if broken; handle with care.\u003cbr\u003e- Wear eye protection when cutting or drilling.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":31233135149158,"sku":"700806","price":18.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/m4cywyuaav3.jpg?v=1793979233"},{"product_id":"full-screen-ips-lcd-diy-mod-kit-for-nintendo-game-boy-color-handhelds-including-adhesive-zedlabz","title":"IPS LCD screen kit for Game Boy Color Nintendo GBC Colour FULL LCD internal mod replacement | Funnyplaying","description":"\u003cstrong\u003eFeatures:\r\n\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\r\n- DIY FULL SCREEN IPS LCD upgrade kit for Nintendo Game Boy Color.\u003cbr\u003e\r\n- Latest generation providing the full original size of screen with brightness control.\u003cbr\u003e- Can be used with original screen lens or standard sized replacements.\u003cbr\u003e\r\n- Includes LCD, adhesive mounting pad and Ribbon cable.\u003cbr\u003e\r\n- Requires substantial console housing modification to fit the larger screen \u0026amp; technical installation.\u003cbr\u003e\u003cbr\u003e\r\n\u003cstrong\u003eDescription:\r\n\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eBring your Game Boy into the modern era with a vivid FULL SCREEN IPS LCD upgrade kit for Game Boy Color consoles.\u003cbr\u003e\u003cbr\u003eThe ribbon powering the LCD is a latest generation type which is correctly synchronised to the Game Boy to avoid screen tearing issues.\u003cbr\u003e\u003cbr\u003eOnce installed the screen supports brightness adjustment via the a touch sensor installed under the IR port.\u003cbr\u003e\u003cbr\u003eThis kit includes all of the items needed to fit the screen into a modified housing (not included), you can cut down your own shell to make the room for the LCD.\u003cbr\u003e\u003cbr\u003eYou will need to have some patience and good electronics skills to fit this kit although purchasing a pre-modified shell (once available) can drastically reduce the effort required and save you up to one hour of cutting and cleaning your own housing.\u003cbr\u003e\u003cbr\u003eAdditional tools needed include a soldering iron and solder (not included).\u003cbr\u003e\u003cbr\u003ePlease note that the LCD screen and ribbon cable require care to install and are fragile in nature, they are also more susceptible to damage once installed if the console is dropped, LCD screens can crack under pressure or with a impact, our warranty does not cover accidental \/ user damage of any components in this kit. Replacement LCD screens are available to purchase separately.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,SHARP,GUIDE\" data-zl-file=\"ZL-IF-FUNNYPLAYING-CE-LCDKIT\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Glass – sharp if broken; handle with care.\u003cbr\u003e- Wear eye protection when cutting or drilling.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Funnyplaying · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Funnyplaying","offers":[{"title":"Default Title","offer_id":31318204383334,"sku":"700880","price":45.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/ed03anbamv0.jpg?v=1793981341"},{"product_id":"centering-bracket-for-nintendo-game-boy-color-osd-ips-lcd-screen-kit-3d-printed-gbc-alignment-positioning-mount-white-zedlabz","title":"Centering bracket for Nintendo Game Boy Color OSD IPS LCD screen kit 3D printed GBC alignment positioning mount - White | ZedLabz","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Game Boy Color Retro Pixel IPS LCD bracket. \u003cbr\u003e- Customized 3D Printed Design. \u003cbr\u003e- For simple installation of the IPS LCD screen.\u003cbr\u003e- Please note this product is White.\u003cbr\u003e- Compatible with Nintendo Game Boy Color handheld console.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eCustomized moulded bracket for Nintendo Game Boy Color Retro Pixel IPS LCD mod. \u003cbr\u003e\u003cbr\u003eCompatible with modified \u003cstrong\u003eRetro Pixel IPS LCD\u003c\/strong\u003e screen Nintendo Game Boy Color console ONLY, please check compatibility before purchasing. \u003cbr\u003e\u003cbr\u003ePlease note: Retro Pixel IPS LCD screen kit for Game Boy Color is sold separately.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRetro Pixel IPS LCD screen kit \/ Housing NOT INCLUDED - For illustration purposed ONLY.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"GUIDE\" data-zl-file=\"ZL-TF-MECH-S07-001\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":39270683410603,"sku":"900189","price":2.56,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/2lobv53dqsi.jpg?v=1793994274"},{"product_id":"full-screen-ips-lcd-q5-xl-upgrade-kit-for-nintendo-game-boy-color-console-funnyplaying","title":"Full screen IPS LCD Q5 XL upgrade kit for Nintendo Game Boy Color console | Funnyplaying","description":"\u003cstrong\u003eFeatures:\r\n\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\r\n- DIY FULL SCREEN IPS LCD Q5 XL upgrade kit for Nintendo Game Boy Color.\u003cbr\u003e\r\n- Latest generation providing the full screen with brightness control.\u003cbr\u003e- Screen display area increased by 25% more than the original.\u003cbr\u003e\r\n- Includes LCD, adhesive mounting pad, glass lens and ribbon cable.\u003cbr\u003e\r\n- Requires substantial console housing modification to fit the larger screen \u0026amp; technical installation.\u003cbr\u003e\u003cbr\u003e\r\n\u003cstrong\u003eDescription:\r\n\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eBring your Game Boy into the modern era with a vivid Q5 XL FULL SCREEN IPS LCD upgrade kit for Game Boy Color consoles.\u003cbr\u003e\u003cbr\u003eThe ribbon powering the LCD is a latest generation type which is correctly synchronised to the Game Boy to avoid screen tearing issues.\u003cbr\u003e\u003cbr\u003eOnce installed the screen supports brightness adjustment via the a touch sensor installed under the IR port.\u003cbr\u003e\u003cbr\u003eThis kit includes all of the items needed to fit the screen into a modified housing (not included), you can cut down your own shell to make the room for the LCD.\u003cbr\u003e\u003cbr\u003eYou will need to have some patience and good electronics skills to fit this kit although purchasing a pre-modified shell (once available) can drastically reduce the effort required and save you up to one hour of cutting and cleaning your own housing.\u003cbr\u003e\u003cbr\u003eAdditional tools needed include a soldering iron and solder (not included).\u003cbr\u003e\u003cbr\u003ePlease note that the LCD screen and ribbon cable require care to install and are fragile in nature, they are also more susceptible to damage once installed if the console is dropped, LCD screens can crack under pressure or with a impact, our warranty does not cover accidental \/ user damage of any components in this kit. Replacement LCD screens are available to purchase separately.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,SHARP,GUIDE\" data-zl-file=\"ZL-IF-FUNNYPLAYING-CE-LCDKIT\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Glass – sharp if broken; handle with care.\u003cbr\u003e- Wear eye protection when cutting or drilling.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Funnyplaying · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Funnyplaying","offers":[{"title":"Default Title","offer_id":39377541791915,"sku":"900241","price":43.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/5bjykhvvy5y.jpg?v=1793994780"},{"product_id":"discrete-centering-bracket-for-nintendo-game-boy-color-q5-osd-ips-lcd-screen-kit-3d-printed-white-zedlabz","title":"Discrete centering bracket for Nintendo Game Boy Color Q5 OSD IPS LCD screen kit 3D printed - White | ZedLabz","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Discrete Game Boy Color Retro Pixel Q5 OSD IPS LCD bracket. \u003cbr\u003e- Customized 3D Printed Design. \u003cbr\u003e- For simple installation of the IPS LCD screen.\u003cbr\u003e- Please note this product is White.\u003cbr\u003e- Compatible with Nintendo Game Boy Color handheld console.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis custom 3D printed bracket helps you to center and install a Q5 IPS LCD mod for Game Boy Color.\u003cbr\u003e\u003cbr\u003eCompatible with Q5 Retro Pixel IPS LCD screen Nintendo Game Boy Color console ONLY, please check compatibility before purchasing. \u003cbr\u003e\u003cbr\u003eTested with Funnyplaying Q5 IPS kit for GBC.\u003cbr\u003e\u003cbr\u003ePlease note: Retro Pixel IPS LCD screen kit for Game Boy Color is sold separately.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRetro Pixel IPS LCD screen kit \/ Housing NOT INCLUDED - For illustration purposed ONLY.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,GUIDE\" data-zl-file=\"ZL-TF-MECH-S00-MULTI-002\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":39895775936683,"sku":"900466","price":2.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/1dsjmon4bev.jpg?v=1793995653"},{"product_id":"discrete-centering-bracket-for-nintendo-game-boy-color-q5-osd-ips-lcd-screen-kit-3d-printed-black-zedlabz","title":"Discrete centering bracket for Nintendo Game Boy Color Q5 OSD IPS LCD screen kit 3D printed - Black | ZedLabz","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Discrete Game Boy Color Retro Pixel Q5 OSD IPS LCD bracket. \u003cbr\u003e- Customized 3D Printed Design. \u003cbr\u003e- For simple installation of the IPS LCD screen.\u003cbr\u003e- Please note this product is White.\u003cbr\u003e- Compatible with Nintendo Game Boy Color handheld console.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eCustomized moulded bracket for Nintendo Game Boy Color Retro Pixel IPS LCD mod. \u003cbr\u003e\u003cbr\u003eCompatible with modified \u003cstrong\u003eRetro Pixel IPS LCD\u003c\/strong\u003e screen Nintendo Game Boy Color console ONLY, please check compatibility before purchasing. \u003cbr\u003e\u003cbr\u003eTested with Funnyplaying Q5 IPS kit for GBC.\u003cbr\u003e\u003cbr\u003ePlease note: Retro Pixel IPS LCD screen kit for Game Boy Color is sold separately.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRetro Pixel IPS LCD screen kit \/ Housing NOT INCLUDED - For illustration purposed ONLY.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,GUIDE\" data-zl-file=\"ZL-TF-MECH-S00-MULTI-002\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":40265577005227,"sku":"900852","price":2.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/ekpevl0ndrb.jpg?v=1793996024"},{"product_id":"v2-ips-lcd-screen-for-nintendo-game-boy-color-handheld-console-gbc-laminated-q5-xl-2-0-upgrade-mod-kit-with-colour-changing-logo-black-funnyplaying","title":"V2 IPS LCD screen for Nintendo Game Boy Color (GBC) laminated Q5 XL 2.0 upgrade mod backlight kit colour changing logo | Funnyplaying","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Latest V2 Laminated Q5 XL IPS screen kit for Nintendo Game Boy Color\u003cbr\u003e- Features colour changing logo and brightness controls.\u003cbr\u003e- Screen display area increased by 25% more than the original.\u003cbr\u003e- Includes LCD screen laminated to the glass, ribbon cable and touch sensor.\u003cbr\u003e- DIY install requires substantial console modification or an IPS ready shell.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eUpgrade your Game Boy Colour to the latest V2 Laminated IPS screen kit.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePlease test the kit before before installing the screen into the shell or removing the protection film to ensure it is working and displaying as expected, this is required for your warranty.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis latest version offers a unique colour changing logo and easier installation when fitted to a Funnyplaying IPS ready shell.\u003cbr\u003e\u003cbr\u003eOnce installed the screen supports brightness adjustment and changing of the colour of the logo on the glass lens.\u003cbr\u003e\u003cbr\u003eThis kit includes all of the items needed to fit the screen into a modified housing (not included), you can cut down your own shell to make the room for the LCD but a IPS ready shell is recommended.\u003cbr\u003e\u003cbr\u003eYou will need to have some patience and good electronics skills to fit this kit although purchasing a pre-modified shell (once available) can drastically reduce the effort required and save you up to one hour of cutting and cleaning your own housing.\u003cbr\u003e\u003cbr\u003eAdditional tools needed include a soldering iron and solder (not included).\u003cbr\u003e\u003cbr\u003ePlease note that the LCD screen and ribbon cable require care to install and are fragile in nature, they are also more susceptible to damage once installed if the console is dropped, LCD screens can crack under pressure or with a impact, our warranty does not cover accidental \/ user damage of any components in this kit. Replacement LCD screens are available to purchase separately.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,HOT,VENT,SHARP,GUIDE\" data-zl-file=\"ZL-IF-FUNNYPLAYING-CE-LCDKIT\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Glass – sharp if broken; handle with care.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Funnyplaying · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Funnyplaying","offers":[{"title":"Black","offer_id":40913062789291,"sku":"900800","price":53.83,"currency_code":"GBP","in_stock":true},{"title":"White","offer_id":40913062822059,"sku":"900801","price":53.83,"currency_code":"GBP","in_stock":true},{"title":"DMG-01 style Grey","offer_id":40913062854827,"sku":"100034","price":53.83,"currency_code":"GBP","in_stock":false},{"title":"Blue","offer_id":40913062887595,"sku":"100035","price":53.83,"currency_code":"GBP","in_stock":false},{"title":"Green","offer_id":40913062920363,"sku":"100036","price":53.83,"currency_code":"GBP","in_stock":true},{"title":"Orange","offer_id":40913062953131,"sku":"100037","price":53.83,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":40913062985899,"sku":"100038","price":53.83,"currency_code":"GBP","in_stock":false},{"title":"Tangerine","offer_id":40913063018667,"sku":"100039","price":53.83,"currency_code":"GBP","in_stock":true},{"title":"Yellow","offer_id":40913063051435,"sku":"100040","price":53.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/2x545diukor.jpg?v=1793996705"},{"product_id":"replacement-laminated-ips-lcd-screen-for-nintendo-game-boy-color-v2-q5-xl-2-0-screen-only-funnyplaying","title":"Replacement laminated IPS LCD screen for Nintendo Game Boy Color V2 Q5 XL 2.0 (screen only) | Funnyplaying","description":"Features: \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e- NOTE: SCREEN Only - This item will not work without the IPS ribbon sold separately.\u003c\/strong\u003e\u003cbr\u003e- Replacement IPS LCD for Game Boy Color 2.0 - Includes laminated glass lens\u003cbr\u003e- IPS LCD only - Ideal for replacing a broken IPS screen.\u003cbr\u003e- Features a digital colour changing logo.\u003cbr\u003e- Original FunnyPlaying product. \u003cbr\u003e\u003cbr\u003eDescription:\u003cbr\u003e\u003cbr\u003eNOTE: To use this product you must already own a full FunnyPlaying IPS upgrade kit with connecting ribbon, this product only replaces the screen part of the kit if it has been damaged.\u003cbr\u003e\u003cbr\u003eReplacement IPS LCD for Nintendo Game Boy Color consoles using a Funnyplaying GBC V2 IPS kit.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis is the IPS LCD Screen ONLY - No connecting cables.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eCompatible with Nintendo Game Boy Color V2 Retro Pixel IPS screen kit\u003cbr\u003e\u003cbr\u003eConsole will need to be disassembled to install, this will void any warranty and is done at owners risk. Please seek professional advice if unsure. \u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SHARP,GUIDE\" data-zl-file=\"ZL-IF-FUNNYPLAYING-SCREEN\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e- Glass – sharp if broken; handle with care.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: FunnyPlaying · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"FunnyPlaying","offers":[{"title":"Black","offer_id":42275353821436,"sku":"900963","price":20.99,"currency_code":"GBP","in_stock":false},{"title":"White","offer_id":42275353854204,"sku":"900964","price":20.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/gbdzuknzunk.jpg?v=1793997246"},{"product_id":"centering-bracket-for-nintendo-game-boy-color-drop-in-2-2-tft-screen-kit-3d-printed-black-zedlabz","title":"Centering Bracket for Nintendo Game Boy Color drop in 2.2\" TFT screen kit 3D printed - Black | ZedLabz","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Game Boy Color TFT LCD bracket set for 2.2\" displays.\u003cbr\u003e- Customized 3D Printed Design. \u003cbr\u003e- For simple centred installation of the LCD screen.\u003cbr\u003e- Please note this is 3D printed and may have some burrs.\u003cbr\u003e- Compatible with Nintendo Game Boy Color handheld console.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eCustomized moulded bracket for Nintendo Game Boy Color 2.2\" LCD drop in mod.\u003cbr\u003e\u003cbr\u003eCompatible with 2.2\" TFT screen for Nintendo Game Boy Color kit only, please check compatibility before purchasing. \u003cbr\u003e\u003cbr\u003eThe design and measurements have been done based on an Original Nintendo shell, the bracket will fit third party shells but may require some trimming due to the variances between an official shell and third party type.\u003cbr\u003e\u003cbr\u003ePlease note: TFT LCD screen kit for Game Boy Color is sold separately.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,GUIDE\" data-zl-file=\"ZL-TF-MECH-S07-001\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":42276909285628,"sku":"100405","price":2.56,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/wokzabfz201.jpg?v=1793997258"},{"product_id":"centering-alignment-bracket-for-nintendo-game-boy-color-3-19-ips-lcd-screen-kit-3d-printed-retromodding","title":"Centering alignment bracket for Nintendo Game Boy Color 3.19\" IPS LCD screen kit 3D printed GBC | Retromodding","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Game Boy Color IPS LCD bracket set for 3.19\" displays.\u003cbr\u003e- Customized 3D printed design by Retromodding.\u003cbr\u003e- For simple installation of the IPS LCD screen.\u003cbr\u003e- Please note the clear option can have a white appearance\u003cbr\u003e- Compatible with Nintendo Game Boy Color handheld console.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eCustomized 3D printed bracket for Nintendo Game Boy Color IPS LCD mod. \u003cbr\u003e\u003cbr\u003eCompatible with 3.19\" IPS screen Nintendo Game Boy Color console ONLY, please check compatibility before purchasing. \u003cbr\u003e\u003cbr\u003eThis is not compatible with Q5 type displays.\u003cbr\u003e\u003cbr\u003ePlease note: IPS LCD screen kit for Game Boy Color is sold separately.\u003cbr\u003e\u003cbr\u003eYou can print your own by downloading the below files from Thingiverse:\u003cbr\u003e\u003cbr\u003ehttps:\/\/www.thingiverse.com\/thing:4034011\u003cbr\u003ehttps:\/\/www.thingiverse.com\/thing:4033984\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"GUIDE\" data-zl-file=\"ZL-IF-RETROMODDING-MECH\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Retro Modding · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Retro Modding","offers":[{"title":"Clear","offer_id":43259966095612,"sku":"900850","price":3.13,"currency_code":"GBP","in_stock":true},{"title":"Black","offer_id":43259966128380,"sku":"900946","price":3.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/ozaxin0usf5.jpg?v=1793997909"},{"product_id":"power-regulator-pcb-board-for-nintendo-game-boy-color-pocket-5v-ips-screen-modded-consoles-gbc-gbp-cgb-mgb-robot-retro","title":"Power regulator pcb board for Nintendo Game Boy Color \u0026 Pocket 5V IPS screen modded consoles GBC GBP [CGB MGB] | Robot retro","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Easy to install 5V power regulator flex for Game Boy Color \u0026amp; Pocket\u003cbr\u003e- Helps to power IPS displays by providing stable voltage.\u003cbr\u003e- Only compatible with IPS screen modded consoles.\u003cbr\u003e- Can be used with or without original DC power board.\u003cbr\u003e- Compatible with Game Boy Color \u0026amp; Pocket.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e The 5V regulator only supports IPS screens and does not provide the voltages for the original screens.\u003cbr\u003e\u003cbr\u003eThis is a replacement power regulator board, which supplies a stable 5V at up to 1A. This upgrade will be able to support all power hungry mods such as IPS screens, flash carts and amp units.\u003cbr\u003e\u003cbr\u003eCan be used with or without the original power regulator board. If maintaining the original, please sure to:\u003cbr\u003e\u003cbr\u003eGameboy Pocket = Cut pin 6 on original power regulator\u003cbr\u003eGameboy Colour = Cut pin 7 on original power regulator\u003cbr\u003e\u003cbr\u003eRequires some technical fitting to install including soldering, the thin pcb comes pre-populated, making installation much easier, no need to solder the tiny capacitors or other parts.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,HOT,VENT,GUIDE\" data-zl-file=\"ZL-IF-ROBOTRETRO\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Robot Retro · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Robot retro","offers":[{"title":"Default Title","offer_id":43837423517948,"sku":"200729","price":9.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/power-regulator-pcb-board-for-nintendo-game-boy-color-pocket-5v-ips-screen-modded-consoles-gbc-gbp-cgb-mgb-robot-retro200729zedlabz-647230.jpg?v=1741475626"},{"product_id":"centering-bracket-for-nintendo-game-boy-color-drop-in-2-2-tft-screen-kit-3d-printed-clear-zedlabz","title":"Centering Bracket for Nintendo Game Boy Color drop in 2.2\" TFT screen kit 3D printed - Clear | ZedLabz","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Game Boy Color TFT LCD bracket set for 2.2\" displays.\u003cbr\u003e- Customized 3D Printed Design. \u003cbr\u003e- For simple centred installation of the LCD screen.\u003cbr\u003e- Please note this is 3D printed and may have some burrs.\u003cbr\u003e- Compatible with Nintendo Game Boy Color handheld console.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eCustomized moulded bracket for Nintendo Game Boy Color 2.2\" LCD drop in mod.\u003cbr\u003e\u003cbr\u003eCompatible with 2.2\" TFT screen for Nintendo Game Boy Color kit only, please check compatibility before purchasing. \u003cbr\u003e\u003cbr\u003eThe design and measurements have been done based on an Original Nintendo shell, the bracket will fit third party shells but may require some trimming due to the variances between an official shell and third party type.\u003cbr\u003e\u003cbr\u003ePlease note: TFT LCD screen kit for Game Boy Color is sold separately.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,GUIDE\" data-zl-file=\"ZL-TF-MECH-S07-001\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":43998455693564,"sku":"100708","price":2.56,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/pb2l5oknj4g.png?v=1794000046"},{"product_id":"ips-lcd-backlight-screen-kit-for-nintendo-game-boy-color-q5-osd-with-brightness-control-pixel-effect-gbc-cgb-hispeedido","title":"IPS LCD backlight screen kit for Nintendo Game Boy Color Q5 OSD, with brightness control \u0026 pixel effect [GBC CGB] | HISPEEDIDO","description":"\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- OSD IPS LCD screen kit for Game Boy Color\u003cbr\u003e- Soldering required for OSD features.\u003cbr\u003e- Adjustable brightness, pixel mode, adjustment of screen position \u0026amp; more.\u003cbr\u003e- Includes driver PCB, flex cable, LCD screen, touch sensor and hookup wire.\u003cbr\u003e- Required items - Modified shell or IPS ready for Q5.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eYou should test the screen before starting the installation, leaving the protective film over the LCD, soldering is not required to test the basic functions, this test should be done to make sure the screen is undamaged and powering up as expected.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Hispeedido IPS backlight screen kit for Game Boy Color offers a modern bright display with enhanced viewing angles, plus a range or additional built in features.\u003cbr\u003e\u003cbr\u003eFeatures include brightness controls, pixel effects, and an on screen display (OSD) menu giving access to vertical \/ horizontal screen position adjustment, battery level indicator and color adjustments.\u003cbr\u003e\u003cbr\u003eYou can use this kit with without soldering, however you will not be able to access some of the additional features such as the OSD without soldering some wires.\u003cbr\u003e\u003cbr\u003eA Q5 grey lens is included in the pack, but you will need a suitable shell, a standard shell is not compatible without trimming.\u003cbr\u003e\u003cbr\u003eYou can trim a shell yourself, or you can purchase an IPS ready shell from a wide range of shells compatible with this kit, make sure the IPS ready shell is Q5 compatible.\u003cbr\u003e\u003cbr\u003eThis kit includes: 1x IPS LCD, 1x Ribbon flex, PCB driver board, hookup wire, touch sensor.\u003cbr\u003e\u003cbr\u003eItems needed for this mod: IPS ready or cut housing shell \u0026amp; IPS modified glass lens (not included)\u003cbr\u003e\u003cbr\u003eSoldering is required to install this products extra features such as OSD menu, vertical and horizontal adjustments and battery level indicator, please seek professional assistance if unsure. \u003cbr\u003e\u003cbr\u003eCompatible with Nintendo Game Boy Color only, not compatible with other models. Please check compatibility before purchasing. \u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,SHARP,GUIDE\" data-zl-file=\"ZL-IF-HISPEEDIDO-CE-LCDKIT\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Glass – sharp if broken; handle with care.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Hispeedido · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Hispeedido","offers":[{"title":"Default Title","offer_id":44450728837372,"sku":"100592","price":53.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/mxmiuday5ol.jpg?v=1794001897"},{"product_id":"oled-laminated-touch-screen-display-for-nintendo-game-boy-color-gbc-amoled-upgrade-mod-backlight-kit-colour-changing-logo-hispeedido","title":"OLED laminated touch screen display for Nintendo Game Boy Color (GBC) AMOLED upgrade mod backlight kit colour changing logo | Hispeedido","description":"\u003cstrong\u003eFeatures:\r\n\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\r\n- AMOLED laminated touch screen kit for Game Boy Color GBC.\u003cbr\u003e\r\n- 16 in 1 pixels, integer scaling, touch screen OSD menu.\u003cbr\u003e- 4 pixel modes, 8 colour pallets, FRM \u0026amp; colour changing logo.\u003cbr\u003e\r\n- Includes OLED screen, PCB, flex cable \u0026amp; wire.\u003cbr\u003e\r\n- Requires soldering \u0026amp; a pre-cut laminated shell (sold seperately).\u003cbr\u003e- Tools are required to install this kit (not included)\u003cbr\u003e\u003cbr\u003e\r\n\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eExperience vivid accurate colours of OLED technology and the first touch screen display in your Game Boy Color. \u003cbr\u003e\u003cbr\u003eThe OLED panel in this mod kit offers beutifully rich colours and the darkest blacks, the same 25% larger screen as the Q5 IPS panels, and touch controls for the OSD menu.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE\u003c\/strong\u003e: Soldering of one wire is required between the PCB and the power switch (the pin marked C), a pre-cut laminated shell is also required, cutting a shell is extremely difficult and may damage the screen if done incorrectly. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePLEASE TEST BEFORE INSTALLATION\u003c\/strong\u003e, perform a bench test before sticking the screen into the shell or removing the protection film or backing from tape to confirm it is working as expected, check for any pixel issues and contact our support team if you have any issues or concerns.\u003cbr\u003e\u003cbr\u003eThe Laminated shells from Funnyplaying are compatible with this screen kit, Hispeedido laminated shells are also coming soon.\u003cbr\u003e\u003cbr\u003eThis kit includes the screen, driver pcb, flex ribbon cable and a hookup wire to connect the power with a soldering iron.\u003cbr\u003e\u003cbr\u003eTools will be needed including a soldering iron, solder and screwdrivers, kapton tape is also recommended to isolate and secure the PCB, these items are not included.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCompatible with Laminated Game Boy Color housing shells from Funnyplaying\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003ePlease note that the LCD screen and ribbon cable require care to install and are fragile in nature, they are also more susceptible to damage once installed if the console is dropped, LCD screens can crack under pressure or with a impact, our warranty does not cover accidental \/ user damage of any components in this kit. Replacement LCD screens are available to purchase separately.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,HOT,VENT,SHARP,GUIDE\" data-zl-file=\"ZL-IF-HISPEEDIDO-CE-LCDKIT\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Glass – sharp if broken; handle with care.\u003cbr\u003e- Wear eye protection when cutting or drilling.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Hispeedido · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Hispeedido","offers":[{"title":"Default Title","offer_id":45346429075708,"sku":"300121","price":55.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/oled-laminated-touch-screen-display-for-nintendo-game-boy-color-gbc-amoled-upgrade-mod-backlight-kit-colour-changing-logo-hispeedido300121hispeedido-586917.jpg?v=1741475223"},{"product_id":"replacement-laminated-oled-screen-for-nintendo-game-boy-color-screen-only-hispeedido","title":"Replacement laminated OLED screen for Nintendo Game Boy Color (screen only) | Hispeedido","description":"\u003cb\u003e\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003cb\u003eFeatures: \u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- NOTE: SCREEN Only - This item will not work without the driver PCB board (sold only as a kit).\u003cbr\u003e- Replacement OLED screen for Game Boy Colour- OLED screen only \u003cbr\u003e- Ideal for replacing a broken IPS screen.\u003cbr\u003e- No cables, PCB boards, adhesives etc are included, only the screen\u003cbr\u003e- Original Hispeedido product\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eNOTE: To use this product you must already own full OLED upgrade kit with connecting ribbon and PCB driver board, this product only replaces the screen part of the kit if it has been damaged.\u003cbr\u003e\u003cbr\u003eReplacement OLED LCD display for Nintendo Game Boy Color consoles using a Hispeedido OLED kit.This is the IPS LCD Screen ONLY - No connecting cables or driver boards\u003cbr\u003e\u003cbr\u003eCompatible with Nintendo Game Boy Color screen kit from Hispeedido\u003cbr\u003e\u003cbr\u003eConsole will need to be disassembled to install, this will void any warranty and is done at owners risk. Please seek professional advice if unsure.\u003cbr\u003e\n\n\u003cp\u003e\u003cstrong\u003eBrowse the range\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"\/en-ca\/collections\/retro\"\u003eRetro gaming parts and accessories\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/en-ca\/collections\/retro-nintendo-game-boy-series\"\u003eGame Boy series parts and accessories\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hispeedido","offers":[{"title":"Black","offer_id":48598826516732,"sku":"000341","price":21.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/replacement-laminated-oled-screen-for-nintendo-game-boy-color-screen-only-hispeedido000341hispeedido-244539.jpg?v=1741475164"},{"product_id":"replacement-laminated-ips-screen-for-fpgbc-fpga-game-boy-color-screen-only-funnyplaying","title":"Replacement laminated IPS screen for FPGBC FPGA Game Boy Color (screen only) | Funnyplaying","description":"\u003cb\u003eFeatures: \u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- NOTE: SCREEN Only - This item will not work without the FPGA motherboard\u003cbr\u003e- Replacement IPS screen for FPGBC FGPA Game Boy Colour\u003cbr\u003e- Ideal for replacing a broken IPS screen.\u003cbr\u003e- No PCB boards included, only the screen \u0026amp; connecting ribbon\u003cbr\u003e- Original FunnyPlaying product\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNOTE:\u003c\/b\u003e To use this product you must already own full FPGA GBC kit with motherboard, battery and speaker, this product only replaces the screen part of the kit if it has been damaged.\u003cbr\u003e\u003cbr\u003eReplacement IPS LCD display for FPGBC custom FPGA Game Boy Color console kit, this is the IPS LCD Screen ONLY - No motherboard \/ driver board.\u003cbr\u003e\u003cbr\u003eIt does include the connecting ribbon, this ribbon is only compatible to connect the screen to a FPGBC motherboard (not included).\u003cbr\u003e\u003cbr\u003eCompatible with FPGBC game boy color console from FunnyPlaying.\u003cbr\u003e\u003cbr\u003eConsole will need to be disassembled to install, this will void any warranty and is done at owners risk. Please seek professional advice if unsure.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SHARP,GUIDE\" data-zl-file=\"ZL-IF-FUNNYPLAYING-SCREEN\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e- Glass – sharp if broken; handle with care.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: FunnyPlaying · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"FunnyPlaying","offers":[{"title":"Default Title","offer_id":46623866355964,"sku":"000533","price":19.77,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/5y0hwv5xo3e.png?v=1794007072"},{"product_id":"laminated-oled-screen-upgrade-kit-with-touch-screen-and-colour-changing-logo-for-nintendo-game-boy-color-console-white-hispeedido","title":"OLED laminated touch screen display for Nintendo Game Boy Color (GBC) AMOLED upgrade mod backlight kit colour changing logo - white | Hispeedido","description":"\u003cstrong\u003eFeatures:\r\n\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\r\n- WHITE AMOLED laminated touch screen kit for Game Boy Color GBC.\u003cbr\u003e\r\n- 16 in 1 pixels, integer scaling, touch screen OSD menu.\u003cbr\u003e- 4 pixel modes, 8 colour pallets, FRM \u0026amp; colour changing logo.\u003cbr\u003e\r\n- Includes OLED screen, PCB, flex cable \u0026amp; wire.\u003cbr\u003e\r\n- Requires soldering \u0026amp; a pre-cut laminated shell (sold seperately).\u003cbr\u003e- Tools are required to install this kit (not included)\u003cbr\u003e\u003cbr\u003e\r\n\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eExperience vivid accurate colours of OLED technology and the first touch screen display in your Game Boy Color. This is the White variant, this screen is also available \u003cbr\u003e\u003cbr\u003eThe OLED panel in this mod kit offers beutifully rich colours and the darkest blacks, the same 25% larger screen as the Q5 IPS panels, and touch controls for the OSD menu.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE\u003c\/strong\u003e: Soldering of one wire is required between the PCB and the power switch (the pin marked C), a pre-cut laminated shell is also required, cutting a shell is extremely difficult and may damage the screen if done incorrectly. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePLEASE TEST BEFORE INSTALLATION\u003c\/strong\u003e, perform a bench test before sticking the screen into the shell or removing the protection film or backing from tape to confirm it is working as expected, check for any pixel issues and contact our support team if you have any issues or concerns.\u003cbr\u003e\u003cbr\u003eThe Laminated shells from Funnyplaying are compatible with this screen kit, Hispeedido laminated shells are also coming soon.\u003cbr\u003e\u003cbr\u003eThis kit includes the screen, driver pcb, flex ribbon cable and a hookup wire to connect the power with a soldering iron.\u003cbr\u003e\u003cbr\u003eTools will be needed including a soldering iron, solder and screwdrivers, kapton tape is also recommended to isolate and secure the PCB, these items are not included.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCompatible with Laminated Game Boy Color housing shells from Funnyplaying\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003ePlease note that the LCD screen and ribbon cable require care to install and are fragile in nature, they are also more susceptible to damage once installed if the console is dropped, LCD screens can crack under pressure or with a impact, our warranty does not cover accidental \/ user damage of any components in this kit. Replacement LCD screens are available to purchase separately.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,HOT,VENT,SHARP,GUIDE\" data-zl-file=\"ZL-IF-HISPEEDIDO-CE-LCDKIT\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Glass – sharp if broken; handle with care.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Hispeedido · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Hispeedido","offers":[{"title":"Default Title","offer_id":46699429232892,"sku":"000584","price":55.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/oled-laminated-touch-screen-display-for-nintendo-game-boy-color-gbc-amoled-upgrade-mod-backlight-kit-colour-changing-logo-white-hispeedido000584hispeedido-111509.jpg?v=1741475047"},{"product_id":"laminated-ips-screen-for-fpgbc-fpga-console-screen-only-white-funnyplaying","title":"Replacement laminated IPS screen for FPGBC FPGA Game Boy Color (screen only) - white | Funnyplaying","description":"\u003cb\u003eFeatures: \u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- NOTE: SCREEN Only - This item will not work without the FPGA motherboard\u003cbr\u003e- Replacement IPS screen for FPGBC FGPA Game Boy Colour\u003cbr\u003e- Ideal for replacing a broken IPS screen.\u003cbr\u003e- No PCB boards included, only the screen \u0026amp; connecting ribbon\u003cbr\u003e- Original FunnyPlaying product\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNOTE:\u003c\/b\u003e To use this product you must already own full FPGA GBC kit with motherboard, battery and speaker, this product only replaces the screen part of the kit if it has been damaged.\u003cbr\u003e\u003cbr\u003eReplacement IPS LCD display for FPGBC custom FPGA Game Boy Color console kit, this is the IPS LCD Screen ONLY - No motherboard \/ driver board.\u003cbr\u003e\u003cbr\u003eIt does include the connecting ribbon, this ribbon is only compatible to connect the screen to a FPGBC motherboard (not included).\u003cbr\u003e\u003cbr\u003eCompatible with FPGBC game boy color console from FunnyPlaying.\u003cbr\u003e\u003cbr\u003eConsole will need to be disassembled to install, this will void any warranty and is done at owners risk. Please seek professional advice if unsure.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SHARP,GUIDE\" data-zl-file=\"ZL-IF-FUNNYPLAYING-SCREEN\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e- Glass – sharp if broken; handle with care.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: FunnyPlaying · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"FunnyPlaying","offers":[{"title":"Default Title","offer_id":46845070180604,"sku":"000734","price":19.77,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/gk52lrboznw.png?v=1794008335"},{"product_id":"drop-in-ips-screen-kit-for-game-boy-color-245-hispeedido-2","title":"Drop in 2.45\" IPS backlight LCD screen mod kit for Nintendo Game Boy Color GBC with 8 modes - Easy install, no solder, no cut | Hispeedido","description":"\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Drop in 2.45\" IPS screen kit for Game Boy Color (CGB)\u003cbr\u003e- Fits OEM and standard housing shells\u003cbr\u003e- 8 pixel modes \u0026amp; 15 brightness levels\u003cbr\u003e- No soldering with touch controls\u003cbr\u003e- Optional soldering to use OSD menu\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eLevel up your Game Boy Color with a vibrant, solder-free display upgrade, say goodbye to dim, outdated visuals and hello to crisp, colorful nostalgia. \u003cbr\u003e\u003cbr\u003eThis 2.45\" IPS Drop-In Screen Kit from Hispeedido is designed for modders of all levels, offering an easy install with no soldering or shell trimming required. \u003cbr\u003e\u003cbr\u003eFeaturing true-to-original display dimensions, pixel-perfect scaling, and full customization options, this kit brings your classic handheld into the modern era—without losing its retro soul.\u003cbr\u003e\u003cbr\u003eAn OEM original housing shell or a standard third party replacement shell can be used with this kit, no special parts are needed.\u003cbr\u003e\u003cbr\u003eSoldering is not required thanks to the build in touch sensors that allow you to control the screens features, if however you would like to have the on screen display menu (OSD) you will need to solder 3 wires.\u003cbr\u003e\u003cbr\u003eThis is a non laminated screen, it will support the OEM screen lens or regular replacement lens.\u003cbr\u003e\u003cbr\u003eBasic tools are needed to install this screen kit, tri-wing and philips screwdrivers are required (not included).\u003cbr\u003e\u003cbr\u003eThe kit includes the IPS LCD screen panel, Driver PCB board, Connecting flex ribbon and an adhesive gasket.\u003cbr\u003e\u003cbr\u003eWhether you’re restoring a childhood favorite or building a showpiece for your collection, this kit is a must-have upgrade.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,SHARP,GUIDE\" data-zl-file=\"ZL-IF-HISPEEDIDO-CE-LCDKIT\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Glass – sharp if broken; handle with care.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Hispeedido · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Hispeedido","offers":[{"title":"Default Title","offer_id":47005766910204,"sku":"200673","price":56.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/drop-in-245-ips-backlight-lcd-screen-mod-kit-for-nintendo-game-boy-color-gbc-with-8-modes-easy-install-no-solder-no-cut-hispeedidohispeedido-776148.jpg?v=1742859358"},{"product_id":"laminated-oled-screen-only-for-nintendo-game-boy-color-console-white-hispeedido","title":"Laminated OLED screen ONLY for Nintendo Game Boy Color console - white | Hispeedido","description":"\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Replacement OLED screen for the Hispeedido Game Boy Color laminated OLED kit\u003cbr\u003e- Screen only - no driver board, ribbon cable or adhesive included\u003cbr\u003e- Will not work on its own; the rest of the Hispeedido OLED kit must already be fitted\u003cbr\u003e- For replacing a cracked or damaged kit screen\u003cbr\u003e- Original Hispeedido part\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThis is the OLED screen from the Hispeedido Game Boy Color OLED kit, sold on its own for anyone who has damaged the screen during or after fitting.\u003cbr\u003e\u003cbr\u003eIt only works with the driver board and ribbon cable from that kit, which are not included. If you do not already have the kit fitted, please buy the full kit instead.\u003cbr\u003e\u003cbr\u003eThe console must be opened to fit the screen, which will void any warranty and is done at your own risk. Please seek professional advice if unsure.\u003cbr\u003e\u003cbr\u003eThis is an unofficial product which is not manufactured by, endorsed, sponsored or licensed by Nintendo.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SHARP,GUIDE\" data-zl-file=\"ZL-IF-HISPEEDIDO-OTHER\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e- Glass – sharp if broken; handle with care.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Hispeedido · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Hispeedido","offers":[{"title":"Default Title","offer_id":67999584715004,"sku":"200946","price":21.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/replacement-laminated-oled-screen-for-nintendo-game-boy-color-screen-only-white-hispeedidohispeedido-5106461.jpg?v=1793090051"}],"url":"https:\/\/www.zedlabz.com\/en-ca\/collections\/ips-screens-display-mods-for-game-boy-color.oembed","provider":"ZedLabz","version":"1.0","type":"link"}