{"title":"IPS Screens \u0026 Display Mods for Original Game Boy (DMG)","description":"\u003cp\u003eUpgrade your original Nintendo Game Boy (DMG-01) with a brighter, sharper screen. Shop IPS and laminated LCD screen kits, backlight mods, polarisers and replacement screens, plus the ribbon cables and brackets that go with them. IPS kits bring vivid colour, adjustable brightness and better viewing angles; check whether a kit needs shell trimming or a specific screen lens before ordering.\u003c\/p\u003e","products":[{"product_id":"replacement-bivert-chip-for-nintendo-game-boy-dmg-01-pocket-gbp-pcb-mounted-clear-green-zedlabz","title":"Replacement Bivert chip for Nintendo Game Boy DMG-01 \u0026 Pocket GBP PCB mounted - clear green | ZedLabz","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- PCB mounted bivert chip for Nintendo Gameboy DMG-01 \u0026amp; Pocket GBP\u003cbr\u003e- Compatible with Nintendo Game Boy DMG-01 \u0026amp; Game Boy Pocket.\u003cbr\u003e- Internal fitting is required for this replacement part. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eReplacement PCB mounted Bivert chip for Nintendo Game Boy DMG-01 \u0026amp; Game Boy Pocket.\u003cbr\u003e\u003cbr\u003eRequires internal fitting and soldering to install. \u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,HOT,VENT,GUIDE\" data-zl-file=\"ZL-TF-ELEC-BOARD-S00-006\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":29477013094502,"sku":"700109","price":4.22,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/u5dft3fzxom.jpg?v=1793970007"},{"product_id":"back-light-kit-for-nintendo-game-boy-dmg-01-console-internal-replacement-zedlabz","title":"Backlight kit screen bivert for Nintendo GameBoy DMG-01 \u0026 Pocket MGB handheld | ZedLabz","description":"\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Replacement back light kit for Game Boy DMG-01 console. \u003cbr\u003e- Includes: Resister, Film, Backlight screen, bivert chip, hookup wire.\u003cbr\u003e- Compatible with Nintendo Game Boy DMG-01. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eReplacement back light kit for Game Boy DMG-01 console. \u003cbr\u003e\u003cbr\u003eThis kit includes: Resister, Film, Backlight screen, bivert chip, hookup wire.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,HOT,VENT,GUIDE\" data-zl-file=\"ZL-TF-CE-LCDKIT-S99-001\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Cool White","offer_id":32075789041766,"sku":"700883","price":8.99,"currency_code":"GBP","in_stock":true},{"title":"Pink","offer_id":32075789074534,"sku":"800134","price":8.99,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":32075789107302,"sku":"800135","price":8.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":32075789140070,"sku":"800136","price":8.99,"currency_code":"GBP","in_stock":true},{"title":"Yellow","offer_id":32075789172838,"sku":"800137","price":8.99,"currency_code":"GBP","in_stock":true},{"title":"Green","offer_id":32075789205606,"sku":"800138","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/ausochuxc2o.jpg?v=1793986778"},{"product_id":"retro-pixel-ips-lcd-screen-for-nintendo-game-boy-dmg-01-console-funny-playing","title":"Retro Pixel IPS LCD screen kit for Nintendo Game Boy DMG-01 console | Funnyplaying","description":"\u003cb\u003e\u003cb\u003eNOTE: You should do a bench test before fitting this kit, testing the LCD screen with the protective film on, before installing it into the shell, any issues with the screen kit should be reported to support@zedlabz.com before install.\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eYou will need a modified glass screen lens with an enlarged viewing window for this kit (not included), the original size screen lens window is too small, and will \u003c\/b\u003e\u003cb\u003eobscure\u003c\/b\u003e\u003cb\u003e some of the larger LCD panel this upgrade offers.\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eModified IPS ready or DIY manually cut shell is required to use this kit, centering brackets (not included) but recommended for easier screen alignment.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eFeatures: \u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Retro Pixel IPS LCD screen kit for Game Boy DMG-01. \u003cbr\u003e- Grayscale adjustment button for brightness. \u003cbr\u003e- Built in 36 retro colour combinations. \u003cbr\u003e- Compatible with Nintendo Game Boy DMG-01 console.\u003cbr\u003e- IPS sized lens cover required - Not included\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription: \u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eRetro Pixel IPS LCD Screen kit for Nintendo Game Boy DMG-01 handheld console. \u003cbr\u003e\u003cbr\u003e\u003cb\u003ePLEASE NOTE: \u003cbr\u003e\u003cbr\u003eYou will need a IPS sized screen lens - Not included with this kit\u003cbr\u003e\u003cbr\u003eShell modification (cutting of plastic inside the shell) is required to fit this kit or alternatively an IPS ready shell replacement can be used.\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eLCD and ribbon have the overall power consumption between 0.3w to 0.8w. \u003cbr\u003e\u003cbr\u003eKit contains: 1x IPS LCD, 1x DMG ribbon, 1x 3M installation tape, , 1x DMG button board, 1x DMG motherboard cable.\u003cbr\u003e\u003cbr\u003eThis kit requires retrofitting the construction of the shell, soldering of speaker. Please seek professional advice if unsure. \u003cbr\u003e\u003cbr\u003eWhen the grid line mode is turned on, some game scenes will flash when switching, which is a refresh problem of the motherboard of the game machine itself. There will also be on the original screen but the original screen refresh rate is so slow that it is not easy to find. This does not affect the perfect display effect of IPS LCD. \u003cbr\u003e\u003cbr\u003eDue to the limitation of the early technology, the DMG motherboard adopts analog sound and has a Noise floor. The assembly of IPS LCD will increase of the host and increase the Noise floor, but it is subtle and difficult to detect at a distance of 10cm. \u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,HOT,VENT,SHARP,GUIDE\" data-zl-file=\"ZL-IF-FUNNYPLAYING-CE-LCDKIT\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Glass – sharp if broken; handle with care.\u003cbr\u003e- Wear eye protection when cutting or drilling.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Funnyplaying · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Funnyplaying","offers":[{"title":"Default Title","offer_id":38153240150187,"sku":"900101","price":54.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/22pibqblklx.png?v=1793993532"},{"product_id":"ips-lcd-for-nintendo-game-boy-dmg-01-pocket-light-handheld-console-funnyplaying","title":"IPS LCD for Nintendo Game Boy DMG-01, Pocket \u0026 Light handheld console | Funnyplaying","description":"\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- NOTE: SCREEN Only - \u003cstrong\u003eThis item will not work without the IPS ribbon sold separately.\u003c\/strong\u003e\u003cbr\u003e- Replacement IPS LCD for Game Boy DMG-01, Pocket \u0026amp; Light console. \u003cbr\u003e- Internal product. \u003cbr\u003e- IPS LCD only - Ideal for replacing a broken IPS screen.\u003cbr\u003e- Original FunnyPlaying product. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eNOTE: To use this product you must already own a full FunnyPlaying IPS upgrade kit with connecting ribbon, this product only replaces the screen part of the kit if it has been damaged.\u003cbr\u003e\u003cbr\u003eReplacement IPS LCD for Nintendo Game Boy DMG-01, Pocket \u0026amp; Light handheld consoles using a Funnyplaying IPS kit.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis is the IPS LCD ONLY. \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eCompatible with Nintendo Game Boy DMG-01, Game Boy Pocket \u0026amp; Game Boy Light consoles only. \u003cbr\u003e\u003cbr\u003eConsole will need to be disassembled to install, this will void any warranty and is done at owners risk. Please seek professional advice if unsure. \u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SHARP,GUIDE\" data-zl-file=\"ZL-IF-FUNNYPLAYING-CE-LCDKIT\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e- Glass – sharp if broken; handle with care.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Funnyplaying · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Funnyplaying","offers":[{"title":"Default Title","offer_id":38160679764139,"sku":"900134","price":12.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/ye5em2jz21a.png?v=1793993881"},{"product_id":"centering-alignment-bracket-for-nintendo-game-boy-dmg-01-q5-retro-pixel-rips-v4-ips-lcd-screen-mod-kit-3d-printed-retro-modding","title":"Centering alignment bracket for Nintendo Game Boy DMG-01 Q5 Retro Pixel \u0026 Rips V4 IPS LCD screen mod kit 3D printed | Retro modding","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- IPS LCD bracket for Game Boy Original DMG-01\u003cbr\u003e- Compatible with Funnyplaying retro pixel \u0026amp; Rips V4 IPS kits\u003cbr\u003e- Customized 3D printed design by Retromodding.\u003cbr\u003e- For simple installation of the IPS LCD screen.\u003cbr\u003e- Please note the clear version of this product can have a white like appearance.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eCustomized 3D printed bracket for Nintendo Game Boy Original DMG-01 IPS LCD mod. \u003cbr\u003e\u003cbr\u003eCompatible with the Funnyplaying Retro Pixel Q5 IPS \u0026amp; Rips V4 IPS kits\u003cbr\u003e\u003cbr\u003eThis is not compatible with OEM screens, only Q5 found in the above kits.\u003cbr\u003e\u003cbr\u003ePlease note: IPS LCD screen kit for Game Boy is sold separately, this is the bracket only.\u003cbr\u003e\u003cbr\u003eYou can print your own by downloading the below files from Thingiverse:\u003cbr\u003e\u003cbr\u003ehttps:\/\/www.thingiverse.com\/thing:4541111\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"GUIDE\" data-zl-file=\"ZL-IF-RETROMODDING-MECH\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Retro Modding · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Retro Modding","offers":[{"title":"Clear","offer_id":43689799909628,"sku":"100720","price":3.56,"currency_code":"GBP","in_stock":false},{"title":"Black","offer_id":43689799876860,"sku":"100721","price":3.56,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/e3mxmdd4c2q.jpg?v=1793998954"},{"product_id":"ips-lcd-backlight-screen-kit-rips-v5-for-nintendo-game-boy-original-dmg-01-hispeedido","title":"IPS LCD backlight screen kit RIPS V5 for Nintendo Game Boy Original DMG-01 | Hispeedido","description":"\u003cstrong\u003eFeatures:\r\n\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\r\n- IPS LCD backlight screen kit for Game Boy Original DMG-01\u003cbr\u003e\r\n- RIPS V5 with 36 different colour palettes to choose from.\u003cbr\u003e\r\n- Soldering of speaker is required, two wires only.\u003cbr\u003e\r\n- Provides regular screen size, no special screen lens required.\u003cbr\u003e\r\n- Requires housing modification \u0026amp; centering bracket (not included)\u003cbr\u003e\u003cbr\u003e\r\n\u003cstrong\u003eDescription:\r\n\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eBrighten up your classic game boy with a RIPS V5 IPS screen kit from Hispeedido.\u003cbr\u003e\u003cbr\u003eThe pack includes the LCD panel, driver board, connecting ribbons and button board.\u003cbr\u003e\u003cbr\u003eOnce installed you can enjoy fantastic picture clarity with no screen tearing.\u003cbr\u003e\u003cbr\u003eUsing the toggle wheel on the side of the game boy you will be able to change the screens colour, a total of 36 colour palette options are available to choose from.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eYou will need to solder the speaker to the button board provided with the kit, this is the only soldering required.\u003cbr\u003e\u003cbr\u003eIn addition to soldering you will also need a housing shell (IPS ready shell or modify your own) with standard screen lens  and a centering bracket to install this kit.\u003cbr\u003e\u003cbr\u003eThis version of rips kit provides the original size display once installed, meaning no special screen lens is required to see the full width and height of the new screen.\u003cbr\u003e\u003cbr\u003eOther items needed which are not included: Modified console housing, centering bracket, basic tools to fit this screen, soldering iron, non of these items are included.\u003cbr\u003e\u003cbr\u003eTo install this upgrade you will need to modify the console housing slightly, which you can do yourself by cutting your own shell to make the room for the LCD.\u003cbr\u003e\u003cbr\u003eYou will need to have some patience and good electronics skills to fit this kit.\u003cbr\u003e\u003cbr\u003ePlease note that the LCD screen and ribbon cable require care to install and are fragile in nature, they are also more susceptible to damage once installed if the console is dropped, LCD screens can crack under pressure or with a impact, our warranty does not cover accidental \/ user damage of any components in this kit. Replacement parts will be available to purchase separately in the near future.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,HOT,VENT,SHARP,GUIDE\" data-zl-file=\"ZL-IF-HISPEEDIDO-CE-LCDKIT\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Glass – sharp if broken; handle with care.\u003cbr\u003e- Wear eye protection when cutting or drilling.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Hispeedido · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Hispeedido","offers":[{"title":"Default Title","offer_id":44057401262332,"sku":"100606","price":51.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/3kl0mzs3ulp.jpg?v=1794000629"},{"product_id":"centering-alignment-bracket-for-nintendo-game-boy-original-dmg-01-rips-v5-ips-lcd-screen-mod-clear-hispeedido","title":"Centering alignment bracket for Nintendo Game Boy Original DMG-01 RIPS V5 IPS LCD screen mod - Clear | Hispeedido","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Bracket for Game Boy DMG RIPS V5 IPS LCD.\u003cbr\u003e- Injection molded for Hispeedido kits.\u003cbr\u003e- For simple centered installation of the screen.\u003cbr\u003e- Provided in a neutral clear colored ABS.\u003cbr\u003e- Compatible with Nintendo Game Boy DMG-01 handheld console.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eCustomized moulded bracket for Hispeedido RIPS V5 Nintendo Game Boy DMG-01 IPS LCD mod. \u003cbr\u003e\u003cbr\u003eThis bracket is specifically for the Hispeedido RIPS V5, please check compatibility before purchasing. \u003cbr\u003e\u003cbr\u003ePlease note: This is a plastic bracket only, IPS kit not included and sold separately.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"GUIDE\" data-zl-file=\"ZL-IF-HISPEEDIDO-OTHER\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Hispeedido · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Hispeedido","offers":[{"title":"Default Title","offer_id":44057906741500,"sku":"100965","price":3.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/oazjssmanty.jpg?v=1794000640"},{"product_id":"ips-backlight-lcd-screen-kit-rips-v4-q5-osd-with-pixel-effect-for-nintendo-game-boy-dmg-01-hispeedido","title":"IPS backlight LCD screen kit RIPS V4 Q5 OSD with pixel effect for Nintendo Game Boy DMG-01 | Hispeedido","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Q5 RIPS V4 IPS LCD backlight screen kit for Game Boy Original DMG-01\u003cbr\u003e- 11% larger display, modified glass lens required (not included)\u003cbr\u003e- Supports OSD, 8 colour modes \u0026amp; retro pixel effect.\u003cbr\u003e- Soldering of speaker is required, two wires only.\u003cbr\u003e- Requires housing modification \u0026amp; centering bracket (not included)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eEnjoy a vibrant large display on your classic game boy DMG-01 with the Q5 RIPS V4 OSD screen mod kit.\u003cbr\u003e\u003cbr\u003eThe pack includes the LCD panel, driver board, connecting ribbons and button board.\u003cbr\u003e\u003cbr\u003eOnce installed you can enjoy several enhancements build into the screen including.\u003cbr\u003e\u003cbr\u003eModern backlit LCD, 8 different colour modes (all adjustable), OSD menu controls and a retro pixels effect mode to make your screen look like old tech whilst being able to enjoy the brightness of the Q5 LCD.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eYou will need to solder the speaker to the button board provided with the kit, this is the only soldering required.\u003cbr\u003e\u003cbr\u003eIn addition to soldering you will also need a housing shell (IPS ready shell or modify your own) with a modified screen lens and a centering bracket to install this kit.\u003cbr\u003e\u003cbr\u003eThis version of rips kit provides the an 11% larger display, meaning that a standard screen lens will obscure a small part of a picture, the lens needs to be swapped out with a IPS compatible one.\u003cbr\u003e\u003cbr\u003eItems needed which are not included: Modified console housing, IPS screen lens, centering bracket, basic tools to fit this screen, soldering iron, non of these items are included.\u003cbr\u003e\u003cbr\u003eTo install this upgrade you will need to modify the console housing slightly, which you can do yourself by cutting your own shell to make the room for the LCD.\u003cbr\u003e\u003cbr\u003eYou will need to have some patience and good electronics skills to fit this kit.\u003cbr\u003e\u003cbr\u003ePlease note that the LCD screen and ribbon cable require care to install and are fragile in nature, they are also more susceptible to damage once installed if the console is dropped, LCD screens can crack under pressure or with a impact, our warranty does not cover accidental \/ user damage of any components in this kit. Replacement parts will be available to purchase separately in the near future.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,HOT,VENT,SHARP,GUIDE\" data-zl-file=\"ZL-IF-HISPEEDIDO-CE-LCDKIT\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Glass – sharp if broken; handle with care.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Hispeedido · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Hispeedido","offers":[{"title":"Default Title","offer_id":44057972343036,"sku":"100605","price":52.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/ips-backlight-lcd-screen-kit-rips-v4-q5-osd-with-pixel-effect-for-nintendo-game-boy-dmg-01-hispeedido100605hispeedido-765022.jpg?v=1741475482"},{"product_id":"centering-alignment-bracket-for-nintendo-game-boy-original-dmg-01-q5-rips-v4-ips-lcd-screen-mod-clear-hispeedido","title":"Centering alignment bracket for Nintendo Game Boy Original DMG-01 Q5 RIPS V4 IPS LCD screen mod - Clear | Hispeedido","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Bracket for Game Boy DMG RIPS V4 Q5 OSD kit.\u003cbr\u003e- Injection molded for Hispeedido kits.\u003cbr\u003e- For simple centered installation of the screen.\u003cbr\u003e- Provided in a neutral clear colored ABS.\u003cbr\u003e- Compatible with Nintendo Game Boy DMG-01 handheld console.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eCustomized moulded bracket for Hispeedido Q5 RIPS V4 Nintendo Game Boy DMG-01 Retro Pixel IPS LCD mod. \u003cbr\u003e\u003cbr\u003eThis bracket is specifically for the Hispeedido RIPS V4 kit that uses a Q5 LCD screen, please check compatibility before purchasing. \u003cbr\u003e\u003cbr\u003ePlease note: This is a plastic bracket only, IPS kit not included and sold separately.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"GUIDE\" data-zl-file=\"ZL-IF-HISPEEDIDO-OTHER\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Hispeedido · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Hispeedido","offers":[{"title":"Default Title","offer_id":44058014089468,"sku":"100967","price":3.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/lbdk3lahmvg.jpg?v=1794000650"},{"product_id":"replacement-21-pin-flex-cable-for-nintendo-game-boy-original-dmg-rips-ips-kits-80mm-x-28mm-hispeedido","title":"Replacement 21 pin flex cable for Nintendo Game Boy Original DMG RIPS IPS kits 80mm x 28mm | Hispeedido","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Replacement flex connecting ribbon for RIPS IPS kits.\u003cbr\u003e- 80mm length x 28mm width.\u003cbr\u003e- 21 pin, pins on same side at both ends.\u003cbr\u003e- Connects the IPS Kit button board to the Game Boy Mainboard.\u003cbr\u003e- Compatible with Hispeedido RIPS kit kits.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis ribbon flex cable replaces the connecting ribbon found in Hispeedido RIPS IPS kits for Game Boy Original.\u003cbr\u003e\u003cbr\u003eThe ribbon is a simple connecting flex which allows communication between the IPS kit button board and the original mainboard in the Game Boy Console.\u003cbr\u003e\u003cbr\u003eCompatible with RIPS kits from Hispeedido, the flex is 21 pin on both ends (pins on the same side both ends), length 80mm and width 27mm.\u003cbr\u003e \u003cbr\u003eAlthough this ribbon is the the same as found in Funnyplaying DMG IPS kits, this version for Hispeedido is slightly shorter, the Funnyplaying version is 90mm long, so if you need a replacement ribbon for Funnyplaying we recommend ordering the correct Funnyplaying version.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"GUIDE\" data-zl-file=\"ZL-IF-HISPEEDIDO-OTHER\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Hispeedido · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Hispeedido","offers":[{"title":"Default Title","offer_id":44087847878908,"sku":"100639","price":4.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/4v24t3izgbh.jpg?v=1794000766"},{"product_id":"compatible-replacement-21-pin-flex-cable-for-nintendo-game-boy-rips-retro-pixel-ips-kits-100mm-x-28mm-zedlabz","title":"Compatible replacement 21 pin flex cable for Nintendo Game Boy RIPS \u0026 Retro Pixel IPS kits 100mm x 28mm | ZedLabz","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Compatible connecting ribbon flex for DMG IPS kits\u003cbr\u003e- 100mm length x 28mm width, 21 pins.\u003cbr\u003e- Pins on same side at both ends, 1.25mm pitch.\u003cbr\u003e- Connects the IPS Kit button board to the Game Boy Mainboard.\u003cbr\u003e- Compatible with Funnyplaying Retro Pixel \u0026amp; RIPS kits.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis compatible ribbon flex cable replaces the connecting ribbon found in Hispeedido RIPS \u0026amp; Funnyplaying Retro Pixel IPS Kits for Game Boy original DMG.\u003cbr\u003e\u003cbr\u003eThe ribbon is a simple connecting flex which allows communication between the IPS kit button board and the original mainboard in the Game Boy Console.\u003cbr\u003e\u003cbr\u003eThe flex is 21 pin on both ends (pins on the same side both ends), pitch 1.25mm, length 100mm and width 28mm.\u003cbr\u003e \u003cbr\u003eThis ribbon is slightly longer than the original for both Hispeedido and Funnyplaying but works the same, this ribbon is 100mm long, and the originals are 90mm long in the Funnyplaying kit and 80mm long in the Hispeedido (RIPS) kit. \u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"GUIDE\" data-zl-file=\"ZL-TF-CABLE-INT-S00-004\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":44104075477244,"sku":"100784","price":3.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/hpvylt5fpm4.jpg?v=1794000815"},{"product_id":"replacement-rear-polarising-film-for-game-boy-pocket-non-adhesive-pre-cut-52x52mm-polarizer-polarizing-2-pack-dmg-mgb-zedlabz","title":"Replacement rear polarising film for Game Boy \u0026 Pocket non adhesive pre-cut 52x52mm polarizer polarizing - 2 pack [DMG MGB] | ZedLabz","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Polarising film for use with Game Boy \/ Pocket Backlight mods\u003cbr\u003e- Pre cut 5.2cm x 5.2cm square without adhesive\u003cbr\u003e- For use with backlight kits\u003cbr\u003e- Includes 2 per pack\u003cbr\u003e- Removable film on both sides to protect prior to installation\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis is a non adhesive pre-cut polerising film used for backlight mods, it is already included in our backlight kits and sits behind the LCD after removing the old rear polarising film.\u003cbr\u003e\u003cbr\u003eThere is protective film on both the front and back of these replacement polarising films, ensure that you remove both sides before installation, making sure you work in a clean environment free from dust and debris as far as is possible.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"GUIDE\" data-zl-file=\"ZL-TF-CONSUMABLE-S00-009\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":44312219943164,"sku":"300347","price":3.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/ax1lf5ab00v.jpg?v=1794001454"},{"product_id":"replacement-driver-ribbon-cable-for-nintendo-game-boy-dmg-pocket-q5-ips-retro-pixel-kit-ribbon-only-funnyplaying","title":"Replacement driver ribbon cable for Nintendo Game Boy DMG \u0026 Pocket Q5 IPS Retro Pixel kit (Ribbon only) | Funnyplaying","description":"\u003cb\u003eThis is only a ribbon cable, no screen included.\r\n\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e This ribbon cable is found in both the Game Boy DMG-01 \u0026amp; Pocket IPS Retro Pixel screen kits.\u003cbr\u003e\u003cbr\u003e You can use this ribbon to replace one with lifted solder pads, a tear or other failure.\r\n\u003cbr\u003e\u003cbr\u003e It will replace ribbons of different revision numbers, so if you have an earlier or later kit this ribbon will work with it.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,GUIDE\" data-zl-file=\"ZL-IF-FUNNYPLAYING-CABLE-INT\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Funnyplaying · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Funnyplaying","offers":[{"title":"Default Title","offer_id":46662208684284,"sku":"200300","price":29.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/r252lzuu10b.jpg?v=1794007495"},{"product_id":"replacement-custom-adhesive-for-game-boy-dmg-01-retro-pixel-lcd-screen-clear-funny-playing","title":"Replacement Custom 3M adhesive for Nintendo Game Boy original classic DMG IPS LCD screen - clear [GB DMG] | Funny playing","description":"\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eReplacement adhesive for Game Boy DMG IPS screen installs\u003c\/li\u003e\r\n\u003cli\u003eDesigned for Q5 IPS kits including Funnyplaying Retro Pixel\u003c\/li\u003e\r\n\u003cli\u003eCompatible with Hispeedido V4 Q5 IPS kits and similar kits\u003c\/li\u003e\r\n\u003cli\u003eClear adhesive with protective backing on both sides\u003c\/li\u003e\r\n\u003cli\u003eHelps secure LCD panel in DMG shell during installation\u003c\/li\u003e\n\u003c\/ul\u003e\r\n\r\n\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\r\nSecure your Game Boy DMG IPS screen during installation with this replacement adhesive. When fitting an IPS upgrade, keeping the screen aligned and fixed in place is important. This adhesive helps hold the LCD panel in position once installed in the shell.\u003cbr\u003e\u003cbr\u003e\r\n\r\nDesigned for use with Q5 IPS screen kits, this adhesive works with Funnyplaying Retro Pixel DMG kits and Hispeedido V4 Q5 IPS kits. It may also be suitable for other IPS kits that use a Q5 screen size. The clear finish helps maintain a clean appearance, especially in transparent or modified shells.\u003cbr\u003e\u003cbr\u003e\r\n\r\nOnce applied, the adhesive bonds the LCD to the shell. Care should be taken during installation, as repositioning the screen after contact can be difficult and may risk damage to the panel.\u003cbr\u003e\u003cbr\u003e\r\n\r\n\u003cb\u003eFurther info:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\r\nThis adhesive includes protective backing on both sides, which should be removed during installation. It is sized for Q5 IPS screens used in Game Boy DMG consoles.\u003cbr\u003e\u003cbr\u003e\r\n\r\nAlignment is important before applying pressure. Ensure the screen is correctly positioned in the shell before fixing it in place. Removing the screen after bonding may require force and could damage the LCD.\u003cbr\u003e\u003cbr\u003e\r\n\r\nCompatibility is based on screen size rather than brand. While designed around common Q5 IPS kits, fitment may vary depending on shell modifications and kit design.\u003cbr\u003e\u003cbr\u003e\r\n\r\n\u003cb\u003eInstallation tips:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eUse fine tip tweezers to help remove backing paper position the adhesive in the shell\u003c\/li\u003e\r\n\u003cli\u003eRemove one side of the backing before placing into the shell\u003c\/li\u003e\r\n\u003cli\u003eCheck alignment carefully before removing the final backing layer\u003c\/li\u003e\r\n\u003cli\u003eApply the screen once positioned to avoid repositioning\u003c\/li\u003e\n\u003c\/ul\u003e\r\n\r\n\u003cb\u003eFAQ:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\r\nQ: Which IPS kits is this adhesive compatible with?\u003cbr\u003e\r\nA: It is designed for Q5 IPS kits including Funnyplaying Retro Pixel and Hispeedido V4. It may also work with other Q5-based kits depending on design.\u003cbr\u003e\u003cbr\u003e\r\n\r\nQ: Can I reposition the screen after applying the adhesive?\u003cbr\u003e\r\nA: It is not recommended. Once the adhesive makes contact, it bonds and removing the screen may damage the panel.\u003cbr\u003e\u003cbr\u003e\r\n\r\nQ: Does this adhesive work with original Game Boy screens?\u003cbr\u003e\r\nA: No, this adhesive is intended for IPS screen upgrades using Q5 size displays.\u003cbr\u003e\u003cbr\u003e\r\n\r\nQ: Does the adhesive come ready to use?\u003cbr\u003e\r\nA: Yes, it includes protective backing on both sides which should be removed during installation.\u003cbr\u003e\u003cbr\u003e\r\n\r\n\u003cb\u003eDisclaimer:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThis is a third party product and is not manufactured, sponsored, endorsed or licensed by Nintendo.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"GUIDE\" data-zl-file=\"ZL-IF-FUNNYPLAYING-OTHER\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: FunnyPlaying · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Funnyplaying","offers":[{"title":"Default Title","offer_id":48897438482684,"sku":"100032","price":3.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/replacement-custom-3m-adhesive-for-nintendo-game-boy-original-classic-dmg-ips-lcd-screen-clear-gb-dmg-funny-playingfunnyplaying-3890391.jpg?v=1774712227"},{"product_id":"grayscale-2-5-backlit-lcd-kit-for-game-boy-dmg-with-osd-menu-only-lcd-kit-hispeedido","title":"Grayscale 2.5\" backlit LCD kit for Game Boy DMG with OSD menu - Only LCD kit | Hispeedido","description":"\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Compatible with the original Game Boy (DMG-01)\u003cbr\u003e- 2.5\" grayscale LCD - same display size as the original screen\u003cbr\u003e- Looks like the original screen with the backlight switched off\u003cbr\u003e- Built-in OSD menu, 10 brightness levels, 30 contrast levels, battery level display\u003cbr\u003e- Brightness adjusted with the original contrast wheel\u003cbr\u003e- In the box: grayscale LCD, driver PCB, bracket, ribbon cable, 2 screwdrivers\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThis kit replaces the original Game Boy screen with a 2.5\" grayscale backlit LCD. It keeps the classic monochrome look and the same display size as the factory screen, so games look the way you remember, only now you can play in the dark.\u003cbr\u003e\u003cbr\u003eWith the backlight off it looks almost like a stock DMG screen. Switch the backlight on and you get 10 brightness levels and 30 contrast levels, both controlled from the original contrast wheel. Hold the wheel for 3 seconds to open the on-screen menu, which also has a battery level display.\u003cbr\u003e\u003cbr\u003eThe kit includes the LCD panel, driver board, mounting bracket, ribbon cable and two screwdrivers. No soldering is needed. Hispeedido notes that the shell needs some trimming when you buy the LCD kit on its own, so a pre-cut or IPS-ready DMG shell makes fitting easier. No shell or lens is included.\u003cbr\u003e\u003cbr\u003ePlease bench test the screen before final assembly, and make sure the ribbon cable goes in the right way round at both ends, because reversing it can damage the driver board. The panel has a slower response time than an IPS screen, so expect a little more ghosting on fast-moving games.\u003cbr\u003e\u003cbr\u003eThis is an unofficial product which is not manufactured by, endorsed, sponsored or licensed by Nintendo.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,GUIDE\" data-zl-file=\"\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Hispeedido. UK importer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Hispeedido","offers":[{"title":"Default Title","offer_id":68028042805500,"sku":"000077","price":46.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/grayscale-25-backlit-lcd-kit-for-game-boy-dmg-with-osd-menu-only-lcd-kit-hispeedidohispeedido-7263684.jpg?v=1793281813"}],"url":"https:\/\/www.zedlabz.com\/en-ch\/collections\/ips-screens-display-mods-for-original-game-boy-dmg.oembed","provider":"ZedLabz","version":"1.0","type":"link"}