Modding and repair tools, the comprehensive catalog for screwdrivers, pry tools and soldering kit at ZedLabz.
Browse tools by job
- Screwdrivers, tri-wing, Phillips, Torx, security bits
- Prying and opening tools, plastic spudgers, openers
- Soldering tools, irons, solder, flux, accessories
- Cutting tools, flush cutters, scalpels
- Inspection and measuring tools, multimeters, magnifiers
- Modding tools (cross-collection)
The tools modders reach for repeatedly. Tri-wing Y-bit screwdrivers for Game Boy and Joy-Con shells, Phillips PH00 for everything else, plastic pry tools that don't mark plastics, ESD tweezers for ribbon work, temperature-controlled soldering irons for board-level jobs. We stock the practical kit a working modder builds up over time, plus the consumables (solder, flux, isopropyl) that get used up.
Quick picks by buyer state
- If it's your first mod: a basic tool kit with tri-wing, Phillips PH00, plastic pry tools and tweezers. Covers most no-solder mods (shells, buttons, drop-in IPS kits).
- The everyday build: tool kit plus a temperature-controlled soldering iron, flux and solder. Covers most mod jobs including stick replacements and audio mods.
- The pro choice: full bench setup, quality iron with adjustable tips, hot air station, multimeter, magnifier lamp, ESD-safe mat, fume extraction. Designed for modders doing repair work regularly.
The tool ladder, what to buy in what order
- Tri-wing Y-bit screwdriver: Game Boy shells, Joy-Cons, Wii Remotes. Cheap and useful.
- Phillips PH00: internal screws on most consoles. Pair with the Tri-wing as the basics.
- Plastic pry tools: open shells without scratching. Browse prying tools.
- Temperature-controlled soldering iron: for any solder work. The Miniware TS101 is a popular starting point, see our soldering tools for the full range.
- Multimeter and magnifier: once you start diagnosing rather than just swapping parts, these become daily tools.
Tracked worldwide delivery on every order.
Related collections
Modding and repair tools. FAQs
What's the minimum tool kit for retro modding?
For no-solder mods: a Tri-wing Y-bit driver, Phillips PH00, a plastic pry tool and a pair of ESD tweezers. That kit covers most shell swaps, drop-in IPS installs and button refreshes across the Game Boy family, Joy-Cons and Wii Remotes.
Do I need a temperature-controlled soldering iron?
For any work beyond the very basics, yes. Cheap fixed-temp irons run too hot and damage pads or components on small modern boards. A temperature-controlled iron, the Miniware TS101 is a popular starting point, gives the precision needed for stick replacements, USB-C mods and audio amp installs.
Why use plastic pry tools instead of a flathead screwdriver?
Metal flatheads scratch and dent plastic shells; modern plastic pry tools (spudgers) flex and slip into shell seams without leaving marks. For any cosmetic-sensitive teardown. Game Boy shells, controller housings, console front panels, plastic tools save the finish.
Is fume extraction necessary for hobby soldering?
For occasional repairs in a well-ventilated room, a fan blowing fumes away is usually sufficient. For regular modding sessions, especially in smaller indoor spaces, a fume extractor is the better long-term choice. Solder fumes contain rosin, minimising inhalation matters for repeat exposure.
