{"title":"Humble Bazooka","description":"\u003cp\u003e\u003cstrong\u003eHumble Bazooka accessories, the curated range for N64 cartridge door flaps and Saturn battery covers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003csection class=\"browse-by\"\u003e\n\u003cbr\u003e\u003ch2\u003eBrowse Humble Bazooka\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eN64 cartridge door flaps\u003c\/strong\u003e, black, blue, green, orange and other color variants\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eSega Saturn parts\u003c\/strong\u003e, replacement battery door cover\u003c\/li\u003e\n \u003cli\u003e\u003ca href=\"\/en-eu\/collections\/all-other-retro\"\u003eAll Other Retro\u003c\/a\u003e\u003c\/li\u003e\n \u003cli\u003e\u003ca href=\"\/en-eu\/collections\/retro-frog\"\u003eRetro Frog\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\n\n\u003cbr\u003e\n\u003cp\u003eHumble Bazooka is a US-based maker focused on small but consistently-needed retro console parts. Their headline range is the Nintendo 64 cartridge door flap replacement set, the spring-loaded door that protects the N64's cartridge slot when no game is inserted. Original Nintendo door flaps frequently go missing or break on N64 cartridges, and Humble Bazooka's replacements come in color variants to match colored N64 shells. Also stocked: replacement Saturn battery door covers.\u003c\/p\u003e\n\n\u003cbr\u003e\u003ch2\u003eQuick picks across the range\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eEasy entry point:\u003c\/strong\u003e a black N64 cartridge door flap, the most common shell color, drops into the original slot.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eThe color-matched build:\u003c\/strong\u003e blue, green, orange or another color variant to match a special-edition N64 shell.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eThe Saturn refresh:\u003c\/strong\u003e the Humble Bazooka Saturn battery door cover for restoring units missing or damaged on that part.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cbr\u003e\u003ch2\u003eHumble Bazooka selection notes\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003eN64 cartridge door flaps are not modding parts, they're cosmetic \/ protective. The N64 plays the same with or without one. The flap keeps dust out of the cartridge slot when idle.\u003c\/li\u003e\n \u003cli\u003eEach color variant is a single SKU, pick by the closest match to your N64 shell color. Modder community typically uses solid black for the most universal match.\u003c\/li\u003e\n \u003cli\u003eSaturn battery door covers replace the small battery compartment door on the Sega Saturn, a common loss part.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWorldwide delivery.\u003c\/p\u003e\n\n\u003cbr\u003e\u003ch2\u003eRelated collections\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\u003ca href=\"\/en-eu\/collections\/all-other-retro\"\u003eAll Other Retro\u003c\/a\u003e\u003c\/li\u003e\n \u003cli\u003e\u003ca href=\"\/en-eu\/collections\/hall-effect-analog-sticks\"\u003eN64 Hall Effect Sticks\u003c\/a\u003e\u003c\/li\u003e\n \u003cli\u003e\n\u003ca href=\"\/en-eu\/collections\/retro-frog\"\u003eRetro Frog\u003c\/a\u003e. N64 wireless dongle bracket\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003csection itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n\u003cbr\u003e\u003ch2\u003eHumble Bazooka. FAQs\u003c\/h2\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003cp\u003e\u003cstrong itemprop=\"name\"\u003eWhat's the N64 cartridge door flap actually for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eIt's the spring-loaded plastic door that closes over the cartridge slot when no game is inserted, keeping dust out of the slot pins. The N64 plays games fine without it; replacing it is a cosmetic and dust-protection upgrade. Today, many original flaps are missing or broken or yellowed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\n\u003cbr\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003cp\u003e\u003cstrong itemprop=\"name\"\u003eWill the Humble Bazooka flap fit my N64?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eYes, designed for the standard Nintendo 64 cartridge slot dimensions. Drops into the original spring channel; no console disassembly needed. Just be careful when fitting that the spring tension is correct.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\n\u003cbr\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003cp\u003e\u003cstrong itemprop=\"name\"\u003eAre these original Nintendo parts?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eNo. Humble Bazooka is a US-based maker producing aftermarket replacement parts. Original Nintendo flaps haven't been produced since the late 90s and are essentially impossible to source new. Humble Bazooka fills the gap with new manufacture in original color matches.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\n\u003cbr\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003cp\u003e\u003cstrong itemprop=\"name\"\u003eIs Humble Bazooka a modding brand?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eTheir range is mostly small replacement and accessory parts rather than electronic mods. N64 cartridge door flaps and Saturn battery doors are cosmetic \/ protective, not function-changing. They're a complementary range alongside the IPS \/ audio mod brands stocked elsewhere.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e","products":[{"product_id":"duo-faceplate-for-game-boy-macro-console-nintendo-ds-lite-mod-3d-printed-black-humble-bazooka","title":"Duo Faceplate for Game Boy Macro console (Nintendo DS Lite mod) 3D printed - Black | Humble Bazooka","description":"\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- 3D printed macro faceplate for Game Boy Macro mod.\u003cbr\u003e- Manufactured in house using high end printers\u003cbr\u003e- Features a textured finish giving it a premium look.\u003cbr\u003e- Requires hardware mod of DS Lite.\u003cbr\u003e- Faceplate only, no other parts included.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003cbr\u003e\u003c\/b\u003e\u003cbr\u003eThis is a 3D printed Face Plate that is used to convert a DS Lite into a GBA Macro after doing the hardware mod.\u003cbr\u003e\u003cbr\u003eWe produce these in house under license using high end printers, a textured finish is embossed into the surface which gives it a more premium factory like finish.\u003cbr\u003e\u003cbr\u003eThe faceplate reuses original screws from the DS Lite to secure it in place, care should be taken when screwing 3D printed plastics as they are not as strong as ABS injection molded products.\u003cbr\u003e\u003cbr\u003eYou will need to modify your DS Lite to remove the top screen and add a 330ohm resistor, plus install an alternative Switch speaker, which needs you to remove the top screen connector from the motherboard to make more room (resistor and speaker not included)\u003cbr\u003e\u003cbr\u003eHelder game tech offers a Macro amp product which does the hardware mod for the DS Lite to Macro conversion, it also increases the audio output, this mod part is available in store seperately.\u003cbr\u003e\u003cbr\u003eThis Face Plate is produced under a commercial license agreement with a percentage of the sale going to the designer Humble Bazooka\u003cbr\u003e\u003cbr\u003eThe faceplate has cut outs for the D-pad, action buttons, start select, speaker (Speaker grill) and LED indicators.\u003cbr\u003e\u003cbr\u003eThis particular macro faceplate design is configured to have a larger opening that can support the Obirux glass screen lens cover. It has also been designed to use a Switch replacement speaker in the top left corner of the faceplate, the top screen connector will need to be removed to make room for this unless you try to locate an alternative speaker somewhere else that does not have the speaker grill (may impact audio volume by doing so).\u003cbr\u003e\u003cbr\u003eThis is an unofficial reproduction novelty item, this item is not manufactured by, approved, supported or endorsed by Nintendo.\u003cbr\u003e\u003cbr\u003e\n\n\u003cp\u003e\u003cstrong\u003eBrowse the range\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"\/en-eu\/collections\/humble-bazooka\"\u003eHumble Bazooka products\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/en-eu\/collections\/popular-mods\"\u003ePopular mods\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Humble Bazooka","offers":[{"title":"Default Title","offer_id":46623741280508,"sku":"000525","price":10.08,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/duo-faceplate-for-game-boy-macro-console-nintendo-ds-lite-mod-3d-printed-black-humble-bazooka000525helder-game-tech-138966.jpg?v=1741475053"},{"product_id":"neo-bt-bluetooth-controller-adapter-for-neo-geo-mvs-style-red-white-humble-bazooka","title":"Neo BT Bluetooth controller adapter for Neo Geo - MVS style Red \u0026 white | Humble Bazooka","description":"\u003cb\u003eFeatures:\u003cbr\u003e\u003c\/b\u003e\u003cbr\u003e- Supports 8BitDo’s Neo Geo Wireless Controller (Bluetooth)\u003cbr\u003e- Use various Bluetooth devices with your Neo Geo, MVS, and Super Gun\u003cbr\u003e- Supports Turbo (requires firmware 1.7+)\u003cbr\u003e- Very low latency, comparable to “2.4Ghz” devices (varies based on controller being used)\u003cbr\u003e- Example: 8BitDo’s PC Engine Mini Controller is around 7.4ms (rpubs.com) whereas BlueRetro with a PS5 controller is lower at around 5.4ms\u003cbr\u003e- Remappable buttons - Easy to use web interface\u003cbr\u003e- Plug \u0026amp; Play - Open source and user updatable\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe Neo BT is a Bluetooth Adapter that allows you to connect various bluetooth controllers to your Neo Geo AES, MVS, CD, or SuperGun. This includes PS3, PS4, PS5, Xbox One, Xbox Series S \u0026amp; X, Switch Joy-Cons, 8BitDo (bluetooth only) and other bluetooth controllers.\u003cbr\u003e\u003cbr\u003eThe Neo BT runs on the incredible BlueRetro platform by Jacques Gagnon. A portion of each sale is donated to Jacques to further support the platform.\u003cbr\u003e\u003cbr\u003eLatency With Controller:\u003cbr\u003e8BitDo Neo Geo CD: ~9.75 ms (taken from MisterAddons)\u003cbr\u003ePS4\/PS5: ~5.4 ms\u003cbr\u003eXBOX One: ~8.8 ms\u003cbr\u003eSwitch Pro: ~12.4 ms\u003cbr\u003ePS3: ~12.8\u003cbr\u003eWiiU Pro: ~13.2 ms\u003cbr\u003eWiimote: ~16.3 ms\u003cbr\u003e\u003cbr\u003e\u003cb\u003eQuick Start Instructions:\u003cbr\u003e\u003c\/b\u003e\u003cbr\u003e\u003cb\u003ePairing:\u003c\/b\u003e\u003cbr\u003eNote: Do not press the “P” button for pairing a single controller.\u003cbr\u003e\u003cbr\u003eWith the adapter connected, power on your console.\u003cbr\u003eThe adapter’s LED will slowly pulse indicating it’s ready to be paired to. If this is the first time powering on the adapter, it may take 30 seconds to start pulsing.\u003cbr\u003ePut your Bluetooth controller into the correct initial pairing mode (i.e. on a DualSense, press Share + Options).\u003cbr\u003eAfter the controller is initially paired, you can simply power on the controller for it to pair again. (i.e. press the PS button of the DualSense controller).\u003cbr\u003eYou can find more information like specific controller brand pairing instructions in the official BlueRetro Pairing Guide.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eButton functions:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003e“R” Button:\u003c\/b\u003e\u003cbr\u003eResets the adapter\u003cbr\u003e\u003cbr\u003e\u003cb\u003e“P” Button:\u003c\/b\u003e\u003cbr\u003eShort press (when a device paired already): Disconnect all Bluetooth devices from the adapter.\u003cbr\u003eShort press (when no device is paired): Cancel Bluetooth inquiry mode (new pairing).\u003cbr\u003e3 sec hold: Enable Bluetooth inquiry mode for pairing a new device.\u003cbr\u003e10 sec hold: Factory resets the adapter to default configuration and clears Bluetooth pairing keys for devices previously paired.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eLED Status:\u003c\/b\u003e\u003cbr\u003eSolid: An error occurred, try rebooting the adapter with the “R” button.\u003cbr\u003ePulsing: Bluetooth inquiry mode enable (new pairing).\u003cbr\u003eOff: Controller connected.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWeb Config Information:\u003c\/b\u003e\u003cbr\u003eAny time you connect to the Web Config, no controller should be paired to the adapter. Web Config is only supported on Desktop or Android Chrome. The full Web Config instructions can be found below. It will cover things like button mapping, turbo, presets, and more.\u003cbr\u003ehttps:\/\/github.com\/darthcloud\/BlueRetro\/wiki\/BlueRetro-BLE-Web-Config-User-Manual\u003cbr\u003e\u003cbr\u003e\u003cb\u003eHow to access the Web Config:\u003c\/b\u003e\u003cbr\u003eWith the adapter connected to the console and the console powered on, navigate to https:\/\/blueretro.io to configure adapter.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eUpdating firmware via Web Config (OTA FW update):\u003c\/b\u003e\u003cbr\u003eNote: Expect around 5 minutes of update time on a PC and significantly longer on Android\u003cbr\u003e\u003cbr\u003eTo download the latest firmware, navigate to https:\/\/darthcloud.itch.io\/blueretro.\u003cbr\u003eClick the “Download Now” Button. You can donate or click “No thanks, just take me to the downloads”.\u003cbr\u003eClick the “Download” button next to the latest “HW1” firmware file.\u003cbr\u003eUnzip the downloaded file somewhere easy to access on your computer\/phone.\u003cbr\u003eWith the adapter connected to the console and the console powered on, open a tab\/window in your web browser and navigate to https:\/\/blueretro.io\/ota.html.\u003cbr\u003eClick “Connect BlueRetro” button.\u003cbr\u003eSelect the “BlueRetro_hw1_parallel_1p.bin” file from the unzipped firmware file you just downloaded.\u003cbr\u003eThe “Live Output” will scroll through with the update process. Allow it time to finish.\u003cbr\u003eVisit the Official BlueRetro Instructions for more in-depth information.\u003cbr\u003e\u003cbr\u003e\u003cb\u003e8BitDo’s Neo Geo Wireless Controller Setup:\u003c\/b\u003e\u003cbr\u003eSlide the mode button to Bluetooth icon on the back of the controller.\u003cbr\u003ePower on your AES\/MVS with the Neo BT connected.\u003cbr\u003eOnce the Neo BT’s LED starts to pulse, press the Start button on the controller. The controller’s LED status will blink and then remain lit once it’s successful paired.\u003cbr\u003ePress and hold Up + Select for 5 seconds to put the controller into D-Pad mode.\u003cbr\u003e\u003cbr\u003eThis product is not designed, manufactured, sponsored, endorsed, or licensed by SNK.\n\n\u003cp\u003e\u003cstrong\u003eBrowse the range\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"\/en-eu\/collections\/humble-bazooka\"\u003eHumble Bazooka products\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/en-eu\/collections\/retro\"\u003eRetro gaming parts and accessories\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Humble Bazooka","offers":[{"title":"Default Title","offer_id":46681854345468,"sku":"000581","price":39.98,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/neo-bt-bluetooth-controller-adapter-for-neo-geo-mvs-style-red-white-humble-bazooka000581humble-bazooka-310030.jpg?v=1741475046"},{"product_id":"neo-bt-bluetooth-controller-adapter-for-neo-geo-aes-style-gold-smoke-black-humble-bazooka","title":"Neo BT Bluetooth controller adapter for Neo Geo - AES style Gold \u0026 smoke black | Humble Bazooka","description":"\u003cb\u003eFeatures:\u003cbr\u003e\u003c\/b\u003e\u003cbr\u003e- Supports 8BitDo’s Neo Geo Wireless Controller (Bluetooth)\u003cbr\u003e- Use various Bluetooth devices with your Neo Geo, MVS, and Super Gun\u003cbr\u003e- Supports Turbo (requires firmware 1.7+)\u003cbr\u003e- Very low latency, comparable to “2.4Ghz” devices (varies based on controller being used)\u003cbr\u003e- Example: 8BitDo’s PC Engine Mini Controller is around 7.4ms (rpubs.com) whereas BlueRetro with a PS5 controller is lower at around 5.4ms\u003cbr\u003e- Remappable buttons - Easy to use web interface\u003cbr\u003e- Plug \u0026amp; Play - Open source and user updatable\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe Neo BT is a Bluetooth Adapter that allows you to connect various bluetooth controllers to your Neo Geo AES, MVS, CD, or SuperGun. This includes PS3, PS4, PS5, Xbox One, Xbox Series S \u0026amp; X, Switch Joy-Cons, 8BitDo (bluetooth only) and other bluetooth controllers.\u003cbr\u003e\u003cbr\u003eThe Neo BT runs on the incredible BlueRetro platform by Jacques Gagnon. A portion of each sale is donated to Jacques to further support the platform.\u003cbr\u003e\u003cbr\u003eLatency With Controller:\u003cbr\u003e8BitDo Neo Geo CD: ~9.75 ms (taken from MisterAddons)\u003cbr\u003ePS4\/PS5: ~5.4 ms\u003cbr\u003eXBOX One: ~8.8 ms\u003cbr\u003eSwitch Pro: ~12.4 ms\u003cbr\u003ePS3: ~12.8\u003cbr\u003eWiiU Pro: ~13.2 ms\u003cbr\u003eWiimote: ~16.3 ms\u003cbr\u003e\u003cbr\u003e\u003cb\u003eQuick Start Instructions:\u003cbr\u003e\u003c\/b\u003e\u003cbr\u003e\u003cb\u003ePairing:\u003c\/b\u003e\u003cbr\u003eNote: Do not press the “P” button for pairing a single controller.\u003cbr\u003e\u003cbr\u003eWith the adapter connected, power on your console.\u003cbr\u003eThe adapter’s LED will slowly pulse indicating it’s ready to be paired to. If this is the first time powering on the adapter, it may take 30 seconds to start pulsing.\u003cbr\u003ePut your Bluetooth controller into the correct initial pairing mode (i.e. on a DualSense, press Share + Options).\u003cbr\u003eAfter the controller is initially paired, you can simply power on the controller for it to pair again. (i.e. press the PS button of the DualSense controller).\u003cbr\u003eYou can find more information like specific controller brand pairing instructions in the official BlueRetro Pairing Guide.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eButton functions:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003e“R” Button:\u003c\/b\u003e\u003cbr\u003eResets the adapter\u003cbr\u003e\u003cbr\u003e\u003cb\u003e“P” Button:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eShort press (when a device paired already): Disconnect all Bluetooth devices from the adapter.\u003cbr\u003eShort press (when no device is paired): Cancel Bluetooth inquiry mode (new pairing).\u003cbr\u003e3 sec hold: Enable Bluetooth inquiry mode for pairing a new device.\u003cbr\u003e10 sec hold: Factory resets the adapter to default configuration and clears Bluetooth pairing keys for devices previously paired.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eLED Status:\u003c\/b\u003e\u003cbr\u003eSolid: An error occurred, try rebooting the adapter with the “R” button.\u003cbr\u003ePulsing: Bluetooth inquiry mode enable (new pairing).\u003cbr\u003eOff: Controller connected.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWeb Config Information:\u003c\/b\u003e\u003cbr\u003eAny time you connect to the Web Config, no controller should be paired to the adapter. Web Config is only supported on Desktop or Android Chrome. The full Web Config instructions can be found below. It will cover things like button mapping, turbo, presets, and more.\u003cbr\u003ehttps:\/\/github.com\/darthcloud\/BlueRetro\/wiki\/BlueRetro-BLE-Web-Config-User-Manual\u003cbr\u003e\u003cbr\u003e\u003cb\u003eHow to access the Web Config:\u003c\/b\u003e\u003cbr\u003eWith the adapter connected to the console and the console powered on, navigate to https:\/\/blueretro.io to configure adapter.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eUpdating firmware via Web Config (OTA FW update):\u003c\/b\u003e\u003cbr\u003eNote: Expect around 5 minutes of update time on a PC and significantly longer on Android\u003cbr\u003e\u003cbr\u003eTo download the latest firmware, navigate to https:\/\/darthcloud.itch.io\/blueretro.\u003cbr\u003eClick the “Download Now” Button. You can donate or click “No thanks, just take me to the downloads”.\u003cbr\u003eClick the “Download” button next to the latest “HW1” firmware file.\u003cbr\u003eUnzip the downloaded file somewhere easy to access on your computer\/phone.\u003cbr\u003eWith the adapter connected to the console and the console powered on, open a tab\/window in your web browser and navigate to https:\/\/blueretro.io\/ota.html.\u003cbr\u003eClick “Connect BlueRetro” button.\u003cbr\u003eSelect the “BlueRetro_hw1_parallel_1p.bin” file from the unzipped firmware file you just downloaded.\u003cbr\u003eThe “Live Output” will scroll through with the update process. Allow it time to finish.\u003cbr\u003eVisit the Official BlueRetro Instructions for more in-depth information.\u003cbr\u003e\u003cbr\u003e\u003cb\u003e8BitDo’s Neo Geo Wireless Controller Setup:\u003c\/b\u003e\u003cbr\u003eSlide the mode button to Bluetooth icon on the back of the controller.\u003cbr\u003ePower on your AES\/MVS with the Neo BT connected.\u003cbr\u003eOnce the Neo BT’s LED starts to pulse, press the Start button on the controller. The controller’s LED status will blink and then remain lit once it’s successful paired.\u003cbr\u003ePress and hold Up + Select for 5 seconds to put the controller into D-Pad mode.\u003cbr\u003e\u003cbr\u003eThis product is not designed, manufactured, sponsored, endorsed, or licensed by SNK.\n\n\u003cp\u003e\u003cstrong\u003eBrowse the range\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"\/en-eu\/collections\/humble-bazooka\"\u003eHumble Bazooka products\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/en-eu\/collections\/retro\"\u003eRetro gaming parts and accessories\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Humble Bazooka","offers":[{"title":"Default Title","offer_id":46681861816572,"sku":"000580","price":39.98,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/neo-bt-bluetooth-controller-adapter-for-neo-geo-aes-style-gold-smoke-black-humble-bazooka000580humble-bazooka-532424.jpg?v=1741475045"},{"product_id":"pce-bt-bluetooth-controller-adapter-for-nec-pc-engine-pc-engine-style-red-clear-humble-bazooka","title":"PCE BT Bluetooth controller adapter for NEC PC Engine - PC Engine style Red \u0026 clear | Humble Bazooka","description":"\u003cb\u003eFeatures:\u003cbr\u003e\u003c\/b\u003e\u003cbr\u003e- Use various Bluetooth devices with your PC Engine\u003cbr\u003e- Turbo Support, 2, 3, and 6 button controller modes\u003cbr\u003e- Built in multitap mode for up to 5 Bluetooth devises\u003cbr\u003e- Low latency, comparable to “2.4Ghz” devices (varies based on controller being used)\u003cbr\u003e- Example: 8BitDo’s 2.4Ghz PC Engine Mini Controller (not compatible) is around 7.4ms (rpubs.com) whereas the PCE BT with a PS5 controller is lower at around 5.4ms\u003cbr\u003e- Remappable buttons that save to the PCE BT\u003cbr\u003e- Plug \u0026amp; Play - OTA updatable through web interface\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe PCE BT is a Bluetooth controller adapter for the Atari Jaguar that allows you to connect Bluetooth controllers like the PS5, PS4, Xbox One, or even Nintendo Switch controllers.\u003cbr\u003e\u003cbr\u003eThe PCE BT runs on the BlueRetro platform by Jacques Gagnon. A portion of each sale is donated to Jacques to further support the platform.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eQuick Start Instructions:\u003cbr\u003e\u003c\/b\u003e\u003cbr\u003e\u003cb\u003ePairing:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNote: \u003c\/b\u003eDo not press the “P” button for pairing a single controller.\u003cbr\u003e\u003cbr\u003eWith the adapter connected, power on your console.\u003cbr\u003eThe adapter’s LED will slowly pulse indicating it’s ready to be paired to. If this is the first time powering on the adapter, it may take 30 seconds to start pulsing.\u003cbr\u003ePut your Bluetooth controller into the correct initial pairing mode (i.e. on a DualSense, press Share + Options).\u003cbr\u003eAfter the controller is initially paired, you can simply power on the controller for it to pair again. (i.e. press the PS button of the DualSense controller).\u003cbr\u003eYou can find more information like specific controller brand pairing instructions in the official \u003cbr\u003eBlueRetro Pairing Guide.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eButton functions:\u003cbr\u003e\u003c\/b\u003e\u003cbr\u003e\u003cb\u003e“R” Button:\u003c\/b\u003e\u003cbr\u003eResets the adapter\u003cbr\u003e\u003cbr\u003e\u003cb\u003e“P” Button:\u003c\/b\u003e\u003cbr\u003eShort press (when a device paired already): Disconnect all Bluetooth devices from the adapter.\u003cbr\u003eShort press (when no device is paired): Cancel Bluetooth inquiry mode (new pairing).\u003cbr\u003e3 sec hold: Enable Bluetooth inquiry mode for pairing a new device.\u003cbr\u003e10 sec hold: Factory resets the adapter to default configuration and clears Bluetooth pairing keys for devices previously paired.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eLED Status:\u003c\/b\u003e\u003cbr\u003eSolid: An error occurred, try rebooting the adapter with the “R” button.\u003cbr\u003ePulsing: Bluetooth inquiry mode enable (new pairing).\u003cbr\u003eOff: Controller connected.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWeb Config Information:\u003c\/b\u003e\u003cbr\u003eAny time you connect to the Web Config, no controller should be paired to the adapter. Web Config is only supported on Desktop or Android Chrome. The full Web Config instructions can be found below. It will cover things like button mapping, turbo, presets, and more.\u003cbr\u003ehttps:\/\/github.com\/darthcloud\/BlueRetro\/wiki\/BlueRetro-BLE-Web-Config-User-Manual\u003cbr\u003e\u003cbr\u003eHow to access the Web Config:\u003cbr\u003eWith the adapter connected to the console and the console powered on, navigate to https:\/\/blueretro.io to configure adapter.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eUpdating firmware via Web Config (OTA FW update):\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNote:\u003c\/b\u003e Expect around 5 minutes of update time on a PC and significantly longer on Android\u003cbr\u003e\u003cbr\u003eTo download the latest firmware, navigate to https:\/\/darthcloud.itch.io\/blueretro.\u003cbr\u003eClick the “Download Now” Button. You can donate or click “No thanks, just take me to the downloads”.\u003cbr\u003eClick the “Download” button next to the latest “HW1” firmware file.\u003cbr\u003eUnzip the downloaded file somewhere easy to access on your computer\/phone.\u003cbr\u003eWith the adapter connected to the console and the console powered on, open a tab\/window in your web browser and navigate to https:\/\/blueretro.io\/ota.html.\u003cbr\u003eClick “Connect BlueRetro” button.\u003cbr\u003eSelect the “BlueRetro_hw1_pc_engine.bin” file from the unzipped firmware file you just downloaded.\u003cbr\u003eThe “Live Output” will scroll through with the update process. Allow it time to finish.\u003cbr\u003e\u003cbr\u003eVisit the Official BlueRetro Instructions for more in-depth information.\u003cbr\u003e\u003cbr\u003eThis product is not designed, manufactured, sponsored, endorsed, or licensed by NEC\n\n\u003cp\u003e\u003cstrong\u003eBrowse the range\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"\/en-eu\/collections\/humble-bazooka\"\u003eHumble Bazooka products\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/en-eu\/collections\/retro\"\u003eRetro gaming parts and accessories\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Humble Bazooka","offers":[{"title":"Default Title","offer_id":46681877840124,"sku":"000577","price":39.98,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/pce-bt-bluetooth-controller-adapter-for-nec-pc-engine-pc-engine-style-red-clear-humble-bazooka000577humble-bazooka-501656.jpg?v=1741475043"},{"product_id":"pce-bt-bluetooth-controller-adapter-for-nec-pc-engine-coregrafx-style-blue-smoke-black-humble-bazooka","title":"PCE BT Bluetooth controller adapter for NEC PC Engine - CoreGrafx style Blue \u0026 Smoke black | Humble Bazooka","description":"\u003cb\u003eFeatures:\u003cbr\u003e\u003c\/b\u003e\u003cbr\u003e- Use various Bluetooth devices with your PC Engine\u003cbr\u003e- Turbo Support, 2, 3, and 6 button controller modes\u003cbr\u003e- Built in multitap mode for up to 5 Bluetooth devises\u003cbr\u003e- Low latency, comparable to “2.4Ghz” devices (varies based on controller being used)\u003cbr\u003e- Example: 8BitDo’s 2.4Ghz PC Engine Mini Controller (not compatible) is around 7.4ms (rpubs.com) whereas the PCE BT with a PS5 controller is lower at around 5.4ms\u003cbr\u003e- Remappable buttons that save to the PCE BT\u003cbr\u003e- Plug \u0026amp; Play - OTA updatable through web interface\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe PCE BT is a Bluetooth controller adapter for the Atari Jaguar that allows you to connect Bluetooth controllers like the PS5, PS4, Xbox One, or even Nintendo Switch controllers.\u003cbr\u003e\u003cbr\u003eThe PCE BT runs on the BlueRetro platform by Jacques Gagnon. A portion of each sale is donated to Jacques to further support the platform.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eQuick Start Instructions:\u003cbr\u003e\u003c\/b\u003e\u003cbr\u003e\u003cb\u003ePairing:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNote: \u003c\/b\u003eDo not press the “P” button for pairing a single controller.\u003cbr\u003e\u003cbr\u003eWith the adapter connected, power on your console.\u003cbr\u003eThe adapter’s LED will slowly pulse indicating it’s ready to be paired to. If this is the first time powering on the adapter, it may take 30 seconds to start pulsing.\u003cbr\u003ePut your Bluetooth controller into the correct initial pairing mode (i.e. on a DualSense, press Share + Options).\u003cbr\u003eAfter the controller is initially paired, you can simply power on the controller for it to pair again. (i.e. press the PS button of the DualSense controller).\u003cbr\u003eYou can find more information like specific controller brand pairing instructions in the official \u003cbr\u003eBlueRetro Pairing Guide.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eButton functions:\u003cbr\u003e\u003c\/b\u003e\u003cbr\u003e\u003cb\u003e“R” Button:\u003c\/b\u003e\u003cbr\u003eResets the adapter\u003cbr\u003e\u003cbr\u003e\u003cb\u003e“P” Button:\u003c\/b\u003e\u003cbr\u003eShort press (when a device paired already): Disconnect all Bluetooth devices from the adapter.\u003cbr\u003eShort press (when no device is paired): Cancel Bluetooth inquiry mode (new pairing).\u003cbr\u003e3 sec hold: Enable Bluetooth inquiry mode for pairing a new device.\u003cbr\u003e10 sec hold: Factory resets the adapter to default configuration and clears Bluetooth pairing keys for devices previously paired.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eLED Status:\u003c\/b\u003e\u003cbr\u003eSolid: An error occurred, try rebooting the adapter with the “R” button.\u003cbr\u003ePulsing: Bluetooth inquiry mode enable (new pairing).\u003cbr\u003eOff: Controller connected.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWeb Config Information:\u003c\/b\u003e\u003cbr\u003eAny time you connect to the Web Config, no controller should be paired to the adapter. Web Config is only supported on Desktop or Android Chrome. The full Web Config instructions can be found below. It will cover things like button mapping, turbo, presets, and more.\u003cbr\u003ehttps:\/\/github.com\/darthcloud\/BlueRetro\/wiki\/BlueRetro-BLE-Web-Config-User-Manual\u003cbr\u003e\u003cbr\u003eHow to access the Web Config:\u003cbr\u003eWith the adapter connected to the console and the console powered on, navigate to https:\/\/blueretro.io to configure adapter.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eUpdating firmware via Web Config (OTA FW update):\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNote:\u003c\/b\u003e Expect around 5 minutes of update time on a PC and significantly longer on Android\u003cbr\u003e\u003cbr\u003eTo download the latest firmware, navigate to https:\/\/darthcloud.itch.io\/blueretro.\u003cbr\u003eClick the “Download Now” Button. You can donate or click “No thanks, just take me to the downloads”.\u003cbr\u003eClick the “Download” button next to the latest “HW1” firmware file.\u003cbr\u003eUnzip the downloaded file somewhere easy to access on your computer\/phone.\u003cbr\u003eWith the adapter connected to the console and the console powered on, open a tab\/window in your web browser and navigate to https:\/\/blueretro.io\/ota.html.\u003cbr\u003eClick “Connect BlueRetro” button.\u003cbr\u003eSelect the “BlueRetro_hw1_pc_engine.bin” file from the unzipped firmware file you just downloaded.\u003cbr\u003eThe “Live Output” will scroll through with the update process. Allow it time to finish.\u003cbr\u003e\u003cbr\u003eVisit the Official BlueRetro Instructions for more in-depth information.\u003cbr\u003e\u003cbr\u003eThis product is not designed, manufactured, sponsored, endorsed, or licensed by NEC\n\n\u003cp\u003e\u003cstrong\u003eBrowse the range\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"\/en-eu\/collections\/humble-bazooka\"\u003eHumble Bazooka products\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/en-eu\/collections\/retro\"\u003eRetro gaming parts and accessories\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Humble Bazooka","offers":[{"title":"Default Title","offer_id":46681882493180,"sku":"000578","price":39.98,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/pce-bt-bluetooth-controller-adapter-for-nec-pc-engine-coregrafx-style-blue-smoke-black-humble-bazooka000578humble-bazooka-477738.jpg?v=1741475044"},{"product_id":"pce-bt-bluetooth-controller-adapter-for-nec-pc-engine-coregrafx-ii-style-orange-smoke-black-humble-bazooka","title":"PCE BT Bluetooth controller adapter for NEC PC Engine - CoreGrafx II style Orange \u0026 Smoke black | Humble Bazooka","description":"\u003cb\u003eFeatures:\u003cbr\u003e\u003c\/b\u003e\u003cbr\u003e- Use various Bluetooth devices with your PC Engine\u003cbr\u003e- Turbo Support, 2, 3, and 6 button controller modes\u003cbr\u003e- Built in multitap mode for up to 5 Bluetooth devises\u003cbr\u003e- Low latency, comparable to “2.4Ghz” devices (varies based on controller being used)\u003cbr\u003e- Example: 8BitDo’s 2.4Ghz PC Engine Mini Controller (not compatible) is around 7.4ms (rpubs.com) whereas the PCE BT with a PS5 controller is lower at around 5.4ms\u003cbr\u003e- Remappable buttons that save to the PCE BT\u003cbr\u003e- Plug \u0026amp; Play - OTA updatable through web interface\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe PCE BT is a Bluetooth controller adapter for the Atari Jaguar that allows you to connect Bluetooth controllers like the PS5, PS4, Xbox One, or even Nintendo Switch controllers.\u003cbr\u003e\u003cbr\u003eThe PCE BT runs on the BlueRetro platform by Jacques Gagnon. A portion of each sale is donated to Jacques to further support the platform.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eQuick Start Instructions:\u003cbr\u003e\u003c\/b\u003e\u003cbr\u003e\u003cb\u003ePairing:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNote: \u003c\/b\u003eDo not press the “P” button for pairing a single controller.\u003cbr\u003e\u003cbr\u003eWith the adapter connected, power on your console.\u003cbr\u003eThe adapter’s LED will slowly pulse indicating it’s ready to be paired to. If this is the first time powering on the adapter, it may take 30 seconds to start pulsing.\u003cbr\u003ePut your Bluetooth controller into the correct initial pairing mode (i.e. on a DualSense, press Share + Options).\u003cbr\u003eAfter the controller is initially paired, you can simply power on the controller for it to pair again. (i.e. press the PS button of the DualSense controller).\u003cbr\u003eYou can find more information like specific controller brand pairing instructions in the official \u003cbr\u003eBlueRetro Pairing Guide.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eButton functions:\u003cbr\u003e\u003c\/b\u003e\u003cbr\u003e\u003cb\u003e“R” Button:\u003c\/b\u003e\u003cbr\u003eResets the adapter\u003cbr\u003e\u003cbr\u003e\u003cb\u003e“P” Button:\u003c\/b\u003e\u003cbr\u003eShort press (when a device paired already): Disconnect all Bluetooth devices from the adapter.\u003cbr\u003eShort press (when no device is paired): Cancel Bluetooth inquiry mode (new pairing).\u003cbr\u003e3 sec hold: Enable Bluetooth inquiry mode for pairing a new device.\u003cbr\u003e10 sec hold: Factory resets the adapter to default configuration and clears Bluetooth pairing keys for devices previously paired.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eLED Status:\u003c\/b\u003e\u003cbr\u003eSolid: An error occurred, try rebooting the adapter with the “R” button.\u003cbr\u003ePulsing: Bluetooth inquiry mode enable (new pairing).\u003cbr\u003eOff: Controller connected.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWeb Config Information:\u003c\/b\u003e\u003cbr\u003eAny time you connect to the Web Config, no controller should be paired to the adapter. Web Config is only supported on Desktop or Android Chrome. The full Web Config instructions can be found below. It will cover things like button mapping, turbo, presets, and more.\u003cbr\u003ehttps:\/\/github.com\/darthcloud\/BlueRetro\/wiki\/BlueRetro-BLE-Web-Config-User-Manual\u003cbr\u003e\u003cbr\u003eHow to access the Web Config:\u003cbr\u003eWith the adapter connected to the console and the console powered on, navigate to https:\/\/blueretro.io to configure adapter.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eUpdating firmware via Web Config (OTA FW update):\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNote:\u003c\/b\u003e Expect around 5 minutes of update time on a PC and significantly longer on Android\u003cbr\u003e\u003cbr\u003eTo download the latest firmware, navigate to https:\/\/darthcloud.itch.io\/blueretro.\u003cbr\u003eClick the “Download Now” Button. You can donate or click “No thanks, just take me to the downloads”.\u003cbr\u003eClick the “Download” button next to the latest “HW1” firmware file.\u003cbr\u003eUnzip the downloaded file somewhere easy to access on your computer\/phone.\u003cbr\u003eWith the adapter connected to the console and the console powered on, open a tab\/window in your web browser and navigate to https:\/\/blueretro.io\/ota.html.\u003cbr\u003eClick “Connect BlueRetro” button.\u003cbr\u003eSelect the “BlueRetro_hw1_pc_engine.bin” file from the unzipped firmware file you just downloaded.\u003cbr\u003eThe “Live Output” will scroll through with the update process. Allow it time to finish.\u003cbr\u003e\u003cbr\u003eVisit the Official BlueRetro Instructions for more in-depth information.\u003cbr\u003e\u003cbr\u003eThis product is not designed, manufactured, sponsored, endorsed, or licensed by NEC\n\n\u003cp\u003e\u003cstrong\u003eBrowse the range\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"\/en-eu\/collections\/humble-bazooka\"\u003eHumble Bazooka products\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/en-eu\/collections\/retro\"\u003eRetro gaming parts and accessories\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Humble Bazooka","offers":[{"title":"Default Title","offer_id":46681886458108,"sku":"000579","price":39.98,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/pce-bt-bluetooth-controller-adapter-for-nec-pc-engine-coregrafx-ii-style-orange-smoke-black-humble-bazooka000579humble-bazooka-691646.jpg?v=1741475043"},{"product_id":"expansion-pak-ejector-removal-tool-for-nintendo-64-n64-black-humble-bazooka","title":"Expansion Pak ejector removal Tool for Nintendo 64 N64 - Black | Humble Bazooka","description":"\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- 3D printed expansion pack ejector tool\u003cbr\u003e- Manufactured in house using high end printers\u003cbr\u003e- Ideal replacement for a lost removal tool\u003cbr\u003e- Avoids using other unsuitable tools that might scratch the console\u003cbr\u003e- Small \u0026amp; compact, easy to store away in a game case or similar\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003cbr\u003e\u003c\/b\u003e\u003cbr\u003eThis is a 3D printed Expansion (Jumper) Pak removal tool compatible with Nintendo 64.\u003cbr\u003e\u003cbr\u003eThis tool is used to remove the Nintendo 64’s Expansion Pak or Jumper Pak from the console. \u003cbr\u003e\u003cbr\u003eMost people lose the original ejection tool (NUS-012) and replacing it usually costs as much as a used game. \u003cbr\u003e\u003cbr\u003ePick up this inexpensive replacement today and save your N64’s shell from scuffing or other damage from using other tools.\u003cbr\u003e\u003cbr\u003eWe produce this in house under license using high end 3D printers.\u003cbr\u003e\u003cbr\u003eThis product is produced under a commercial license agreement with a percentage of the sale going to the designer Humble Bazooka.\u003cbr\u003e\u003cbr\u003eThis is an unofficial reproduction novelty item, this item is not manufactured by, approved, supported or endorsed by Nintendo.\u003cbr\u003e\u003cbr\u003e\n\n\u003cp\u003e\u003cstrong\u003eBrowse the range\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"\/en-eu\/collections\/humble-bazooka\"\u003eHumble Bazooka products\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/en-eu\/collections\/retro\"\u003eRetro gaming parts and accessories\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Humble Bazooka","offers":[{"title":"Default Title","offer_id":46762982867196,"sku":"000623","price":2.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/expansion-pak-ejector-removal-tool-for-nintendo-64-n64-black-humble-bazooka000623humble-bazooka-212926.jpg?v=1741474935"},{"product_id":"expansion-pak-ejector-removal-tool-for-nintendo-64-n64-red-humble-bazooka","title":"Expansion Pak ejector removal Tool for Nintendo 64 N64 - Red | Humble Bazooka","description":"\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- 3D printed expansion pack ejector tool\u003cbr\u003e- Manufactured in house using high end printers\u003cbr\u003e- Ideal replacement for a lost removal tool\u003cbr\u003e- Avoids using other unsuitable tools that might scratch the console\u003cbr\u003e- Small \u0026amp; compact, easy to store away in a game case or similar\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003cbr\u003e\u003c\/b\u003e\u003cbr\u003eThis is a 3D printed Expansion (Jumper) Pak removal tool compatible with Nintendo 64.\u003cbr\u003e\u003cbr\u003eThis tool is used to remove the Nintendo 64’s Expansion Pak or Jumper Pak from the console. \u003cbr\u003e\u003cbr\u003eMost people lose the original ejection tool (NUS-012) and replacing it usually costs as much as a used game. \u003cbr\u003e\u003cbr\u003ePick up this inexpensive replacement today and save your N64’s shell from scuffing or other damage from using other tools.\u003cbr\u003e\u003cbr\u003eWe produce this in house under license using high end 3D printers.\u003cbr\u003e\u003cbr\u003eThis product is produced under a commercial license agreement with a percentage of the sale going to the designer Humble Bazooka.\u003cbr\u003e\u003cbr\u003eThis is an unofficial reproduction novelty item, this item is not manufactured by, approved, supported or endorsed by Nintendo.\u003cbr\u003e\u003cbr\u003e\n\n\u003cp\u003e\u003cstrong\u003eBrowse the range\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"\/en-eu\/collections\/humble-bazooka\"\u003eHumble Bazooka products\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/en-eu\/collections\/retro\"\u003eRetro gaming parts and accessories\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Humble Bazooka","offers":[{"title":"Default Title","offer_id":46763030610172,"sku":"000624","price":2.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/expansion-pak-ejector-removal-tool-for-nintendo-64-n64-red-humble-bazooka000624humble-bazooka-583461.jpg?v=1741474935"},{"product_id":"cartridge-door-flaps-for-nintendo-64-n64-red-humble-bazooka","title":"Cartridge door flaps for Nintendo 64 N64 - Red | Humble Bazooka","description":"\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- 3D printed cartridge door flap set.\u003cbr\u003e- Manufactured in house using high end printers\u003cbr\u003e- One set included (Springs NOT included)\u003cbr\u003e- Simple to fit (Reuse the original springs)\u003cbr\u003e- Console dissaembly required to install \u003cbr\u003e- Philips #2 screwdriver required to open N64 console (not included)\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003cbr\u003e\u003c\/b\u003e\u003cbr\u003eAdd some colour or a unique new look to your N64 with a replacement 3D printed game cartridge door set.\u003cbr\u003e\u003cbr\u003eThese are a direct drop in replacement for the original N64 cartridge doors. \u003cbr\u003e\u003cbr\u003eThere are two doors, a top and bottom one, which make up the flaps that protect the console cartridge slot from dust and debris.\u003cbr\u003e\u003cbr\u003eIncludes one door flap set, no springs are included, you will need to use the original springs that came with your original doors.\u003cbr\u003e\u003cbr\u003eRequires internal fitting, console must be dissasembled to install.\u003cbr\u003e\u003cbr\u003eWe produce this in house under license using high end 3D printers.\u003cbr\u003e\u003cbr\u003eThis product is produced under a commercial license agreement with a percentage of the sale going to the designer Humble Bazooka.\u003cbr\u003e\u003cbr\u003eThis is an unofficial reproduction novelty item, this item is not manufactured by, approved, supported or endorsed by Nintendo.\u003cbr\u003e\u003cbr\u003e\n\n\u003cp\u003e\u003cstrong\u003eBrowse the range\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"\/en-eu\/collections\/humble-bazooka\"\u003eHumble Bazooka products\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/en-eu\/collections\/retro\"\u003eRetro gaming parts and accessories\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Humble Bazooka","offers":[{"title":"Default Title","offer_id":46763474780412,"sku":"000627","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/cartridge-door-flaps-for-nintendo-64-n64-red-humble-bazooka000627humble-bazooka-780862.jpg?v=1741474936"},{"product_id":"cartridge-door-flaps-for-nintendo-64-n64-green-humble-bazooka","title":"Cartridge door flaps for Nintendo 64 N64 - Green | Humble Bazooka","description":"\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- 3D printed cartridge door flap set.\u003cbr\u003e- Manufactured in house using high end printers\u003cbr\u003e- One set included (Springs NOT included)\u003cbr\u003e- Simple to fit (Reuse the original springs)\u003cbr\u003e- Console dissaembly required to install \u003cbr\u003e- Philips #2 screwdriver required to open N64 console (not included)\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003cbr\u003e\u003c\/b\u003e\u003cbr\u003eAdd some colour or a unique new look to your N64 with a replacement 3D printed game cartridge door set.\u003cbr\u003e\u003cbr\u003eThese are a direct drop in replacement for the original N64 cartridge doors. \u003cbr\u003e\u003cbr\u003eThere are two doors, a top and bottom one, which make up the flaps that protect the console cartridge slot from dust and debris.\u003cbr\u003e\u003cbr\u003eIncludes one door flap set, no springs are included, you will need to use the original springs that came with your original doors.\u003cbr\u003e\u003cbr\u003eRequires internal fitting, console must be dissasembled to install.\u003cbr\u003e\u003cbr\u003eWe produce this in house under license using high end 3D printers.\u003cbr\u003e\u003cbr\u003eThis product is produced under a commercial license agreement with a percentage of the sale going to the designer Humble Bazooka.\u003cbr\u003e\u003cbr\u003eThis is an unofficial reproduction novelty item, this item is not manufactured by, approved, supported or endorsed by Nintendo.\u003cbr\u003e\u003cbr\u003e\n\n\u003cp\u003e\u003cstrong\u003eBrowse the range\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"\/en-eu\/collections\/humble-bazooka\"\u003eHumble Bazooka products\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/en-eu\/collections\/retro\"\u003eRetro gaming parts and accessories\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Humble Bazooka","offers":[{"title":"Default Title","offer_id":46763478319356,"sku":"000626","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/cartridge-door-flaps-for-nintendo-64-n64-green-humble-bazooka000626humble-bazooka-827507.jpg?v=1741474936"},{"product_id":"cartridge-door-flaps-for-nintendo-64-n64-black-humble-bazooka","title":"Cartridge door flaps for Nintendo 64 N64 - Black | Humble Bazooka","description":"\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- 3D printed cartridge door flap set.\u003cbr\u003e- Manufactured in house using high end printers\u003cbr\u003e- One set included (Springs NOT included)\u003cbr\u003e- Simple to fit (Reuse the original springs)\u003cbr\u003e- Console dissaembly required to install \u003cbr\u003e- Philips #2 screwdriver required to open N64 console (not included)\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003cbr\u003e\u003c\/b\u003e\u003cbr\u003eAdd some colour or a unique new look to your N64 with a replacement 3D printed game cartridge door set.\u003cbr\u003e\u003cbr\u003eThese are a direct drop in replacement for the original N64 cartridge doors. \u003cbr\u003e\u003cbr\u003eThere are two doors, a top and bottom one, which make up the flaps that protect the console cartridge slot from dust and debris.\u003cbr\u003e\u003cbr\u003eIncludes one door flap set, no springs are included, you will need to use the original springs that came with your original doors.\u003cbr\u003e\u003cbr\u003eRequires internal fitting, console must be dissasembled to install.\u003cbr\u003e\u003cbr\u003eWe produce this in house under license using high end 3D printers.\u003cbr\u003e\u003cbr\u003eThis product is produced under a commercial license agreement with a percentage of the sale going to the designer Humble Bazooka.\u003cbr\u003e\u003cbr\u003eThis is an unofficial reproduction novelty item, this item is not manufactured by, approved, supported or endorsed by Nintendo.\u003cbr\u003e\u003cbr\u003e\n\n\u003cp\u003e\u003cstrong\u003eBrowse the range\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"\/en-eu\/collections\/humble-bazooka\"\u003eHumble Bazooka products\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/en-eu\/collections\/retro\"\u003eRetro gaming parts and accessories\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Humble Bazooka","offers":[{"title":"Default Title","offer_id":46763492868348,"sku":"000625","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/cartridge-door-flaps-for-nintendo-64-n64-black-humble-bazooka000625humble-bazooka-472368.jpg?v=1741474936"},{"product_id":"sega-saturn-battery-door-black-humble-bazooka","title":"Battery door cover for Sega Saturn console - Black | Humble Bazooka","description":"\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- 3D printed replacement door for Sega Saturn\u003cbr\u003e- Manufactured in house using high end printers\u003cbr\u003e- Ideal replacement for a lost cover\u003cbr\u003e- Made from two pieces that snap together\u003cbr\u003e- Designed by Humble Bazooka to minic the original\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eA simple 3D Printed replacement battery door for your Sega Saturn. \u003cbr\u003e\u003cbr\u003eCustom designed tab that mimics the OEM battery door.\u003cbr\u003e\u003cbr\u003eThis is made from two pieces which snap together, we supply it fitted and ready to use.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eLicensing:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThis product is produced under a commercial license agreement with a percentage of the sale going to the designer Humble Bazooka.\u003cbr\u003e\u003cbr\u003eWe produce this in-house using high end 3D printers and quality filament.\u003cbr\u003e\u003cbr\u003eThis is an unofficial third party product, it is not manufactured by, approved, supported or endorsed by Sega Saturn\u003cbr\u003e\u003cbr\u003e\n\n\u003cp\u003e\u003cstrong\u003eBrowse the range\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"\/en-eu\/collections\/humble-bazooka\"\u003eHumble Bazooka products\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/en-eu\/collections\/retro\"\u003eRetro gaming parts and accessories\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Humble Bazooka","offers":[{"title":"Default Title","offer_id":46860391317756,"sku":"000819","price":7.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/battery-door-cover-for-sega-saturn-console-black-humble-bazooka000819humble-bazooka-392234.jpg?v=1741474925"},{"product_id":"cartridge-door-flaps-for-nintendo-64-n64-orange-humble-bazooka","title":"Cartridge door flaps for Nintendo 64 N64 - Orange | Humble Bazooka","description":"\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- 3D printed cartridge door flap set.\u003cbr\u003e- Manufactured in house using high end printers\u003cbr\u003e- One set included (Springs NOT included)\u003cbr\u003e- Simple to fit (Reuse the original springs)\u003cbr\u003e- Console dissaembly required to install \u003cbr\u003e- Philips #2 screwdriver required to open N64 console (not included)\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003cbr\u003e\u003c\/b\u003e\u003cbr\u003eAdd some colour or a unique new look to your N64 with a replacement 3D printed game cartridge door set.\u003cbr\u003e\u003cbr\u003eThese are a direct drop in replacement for the original N64 cartridge doors. \u003cbr\u003e\u003cbr\u003eThere are two doors, a top and bottom one, which make up the flaps that protect the console cartridge slot from dust and debris.\u003cbr\u003e\u003cbr\u003eIncludes one door flap set, no springs are included, you will need to use the original springs that came with your original doors.\u003cbr\u003e\u003cbr\u003eRequires internal fitting, console must be dissasembled to install.\u003cbr\u003e\u003cbr\u003eWe produce this in house under license using high end 3D printers.\u003cbr\u003e\u003cbr\u003eThis product is produced under a commercial license agreement with a percentage of the sale going to the designer Humble Bazooka.\u003cbr\u003e\u003cbr\u003eThis is an unofficial reproduction novelty item, this item is not manufactured by, approved, supported or endorsed by Nintendo.\u003cbr\u003e\u003cbr\u003e\n\n\u003cp\u003e\u003cstrong\u003eBrowse the range\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"\/en-eu\/collections\/humble-bazooka\"\u003eHumble Bazooka products\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/en-eu\/collections\/retro\"\u003eRetro gaming parts and accessories\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Humble Bazooka","offers":[{"title":"Default Title","offer_id":48399919743228,"sku":"000826","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/cartridge-door-flaps-for-nintendo-64-n64-orange-humble-bazookahumble-bazooka-1245105.jpg?v=1762037534"},{"product_id":"cartridge-door-flaps-for-nintendo-64-n64-blue-humble-bazooka","title":"Cartridge door flaps for Nintendo 64 N64 - Blue | Humble Bazooka","description":"\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- 3D printed cartridge door flap set.\u003cbr\u003e- Manufactured in house using high end printers\u003cbr\u003e- One set included (Springs NOT included)\u003cbr\u003e- Simple to fit (Reuse the original springs)\u003cbr\u003e- Console dissaembly required to install \u003cbr\u003e- Philips #2 screwdriver required to open N64 console (not included)\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003cbr\u003e\u003c\/b\u003e\u003cbr\u003eAdd some colour or a unique new look to your N64 with a replacement 3D printed game cartridge door set.\u003cbr\u003e\u003cbr\u003eThese are a direct drop in replacement for the original N64 cartridge doors. \u003cbr\u003e\u003cbr\u003eThere are two doors, a top and bottom one, which make up the flaps that protect the console cartridge slot from dust and debris.\u003cbr\u003e\u003cbr\u003eIncludes one door flap set, no springs are included, you will need to use the original springs that came with your original doors.\u003cbr\u003e\u003cbr\u003eRequires internal fitting, console must be dissasembled to install.\u003cbr\u003e\u003cbr\u003eWe produce this in house under license using high end 3D printers.\u003cbr\u003e\u003cbr\u003eThis product is produced under a commercial license agreement with a percentage of the sale going to the designer Humble Bazooka.\u003cbr\u003e\u003cbr\u003eThis is an unofficial reproduction novelty item, this item is not manufactured by, approved, supported or endorsed by Nintendo.\u003cbr\u003e\u003cbr\u003e\n\n\u003cp\u003e\u003cstrong\u003eBrowse the range\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"\/en-eu\/collections\/humble-bazooka\"\u003eHumble Bazooka products\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/en-eu\/collections\/retro\"\u003eRetro gaming parts and accessories\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Humble Bazooka","offers":[{"title":"Default Title","offer_id":48399920005372,"sku":"000717","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/cartridge-door-flaps-for-nintendo-64-n64-blue-humble-bazookahumble-bazooka-4151780.jpg?v=1762037533"},{"product_id":"parallel-io-door-for-ps1-playstation-grey-humble-bazooka","title":"Replacement parallel I\/O door cover for Sony PS1 Playstation - Grey | Humble Bazooka","description":"\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- 3D printed \u003cspan style=\"font-size: 13px;\"\u003ereplacement \u003c\/span\u003eI\/O parallel door for Sony PS1\u003cbr\u003e- Manufactured in house using high end printers\u003cbr\u003e- Ideal replacement for a lost cover\u003cbr\u003e- On piece design with build in catch\u003cbr\u003e- Designed by Humble Bazooka to minic the original\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eA simple 3D Printed replacement battery door for your Sony Playstation to replace damaged or lost I\/O parallel covers.\u003cbr\u003e\u003cbr\u003eCustom designed tab that mimics the OEM door.\u003cbr\u003e\u003cbr\u003eThis is a single piece design ready to use, simply clips into place.\u003cbr\u003e\u003cbr\u003eNote this is not an exact colour match to the original PS1 grey due to the difficulty in matching filament material, the colour is similar but not the same.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eLicensing:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThis product is produced under a commercial license agreement with a percentage of the sale going to the designer Humble Bazooka.\u003cbr\u003e\u003cbr\u003eWe produce this in-house using high end 3D printers and quality filament.\u003cbr\u003e\u003cbr\u003eThis is an unofficial third party product, it is not manufactured by, approved, supported or endorsed by Sega Saturn\u003cbr\u003e\u003cbr\u003e","brand":"Humble Bazooka","offers":[{"title":"Default Title","offer_id":48404335427836,"sku":"300021","price":4.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/replacement-parallel-io-door-cover-for-sony-ps1-playstation-grey-humble-bazookahumble-bazooka-2909825.jpg?v=1762135364"}],"url":"https:\/\/www.zedlabz.com\/en-eu\/collections\/humble-bazooka.oembed","provider":"ZedLabz","version":"1.0","type":"link"}