{"title":"FunnyPlaying Laminated IPS \u0026 ITA Screens \u0026 Shells for Game Boy Advance","description":"\u003cp\u003eFunnyPlaying laminated IPS and ITA TFT screen kits for Game Boy Advance, with the matching laminated-ready no-cut shells, replacement screens, brackets and ribbons.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot interchangeable with Hispeedido:\u003c\/strong\u003e FunnyPlaying laminated GBA screens and shells use a different method of mounting the screen to the shell and a different shell design, so they will not fit Hispeedido laminated shells or screens. IPS MAX also has its own dedicated shell.\u003c\/p\u003e","products":[{"product_id":"laminated-ita-tft-ips-3-0-ready-shell-for-nintendo-game-boy-advance-modified-no-cut-housing-agb-gba-funnyplaying","title":"Laminated ITA TFT \/ IPS 3.0 ready shell for Nintendo Game Boy Advance modified no cut housing (AGB GBA) | Funnyplaying","description":"\u003cb\u003eFeatures:\r\n\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Laminted ITA TFT \/ IPS 3.0 screen ready housing shell for Game Boy Advance.\r\n\u003cbr\u003e- Compatible with Laminated ITA or IPS Funnyplaying screen kits.\u003cbr\u003e- Shell requires a ITA \/ IPS screen bracket (included with screen kits)\r\n\u003cbr\u003e- Includes screws and rear housing sticker.\r\n\u003cbr\u003e- ITA \/ IPS screen kit not included, Housing only.\r\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription:\r\n\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe Laminated ITA \/ IPS ready housing shell for Nintendo Game Boy Advance from Funnyplaying provides a no cut solution for the laminated ITA \/ IPS 3.0\" screen kits as well as Lipo battery mods.\u003cbr\u003e\u003cbr\u003eThis shell has a very significant screen opening and is only designed for use with laminated ITA \u0026amp; laminated IPS kits.\u003cbr\u003e\u003cbr\u003eThe overall size, texture and appearance of the shell closely resembles the original game boy advance.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eThese are not suitable for other brands of laminated screen kit, they are specifically for Funnyplaying laminated screens only.\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe battery bay has been made to be empty and open, which will still accept AA batteries or a lipo battery mod.\u003cbr\u003e\u003cbr\u003eThe front shell screen window is enlarged to allow a laminated panel to be used, a bracket is needed to hold the ITA or IPS laminated kit (not included with the shell but with the screen kit)\u003cbr\u003e\u003cbr\u003eAvoid having to use DIY cutting methods, the cutting would be so significant that you could easily spend hours cutting, and its likely a mistake would be made.\u003cbr\u003e\u003cbr\u003eThis is a front and back housing ONLY, no ITA \/ IPS kit, bracket or screen lens or buttons included, included parts are as follows: Front and back housing, battery terminal contact, battery cover, rear sticker, screw set.\u003cbr\u003e\u003cbr\u003eA tri-wing screwdriver is needed to dissemble your console (not included).\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,GUIDE\" data-zl-file=\"ZL-IF-FUNNYPLAYING-SHELL\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Funnyplaying · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"FunnyPlaying","offers":[{"title":"Clear","offer_id":43695376564476,"sku":"200304","price":13.49,"currency_code":"GBP","in_stock":true},{"title":"Clear Black","offer_id":43695376597244,"sku":"200327","price":13.49,"currency_code":"GBP","in_stock":true},{"title":"Clear Green","offer_id":43695376630012,"sku":"200328","price":13.49,"currency_code":"GBP","in_stock":true},{"title":"Clear Purple","offer_id":43695376662780,"sku":"200329","price":13.49,"currency_code":"GBP","in_stock":true},{"title":"Beige","offer_id":43695376695548,"sku":"200330","price":13.49,"currency_code":"GBP","in_stock":true},{"title":"Mint green (baby blue)","offer_id":44112204431612,"sku":"100790","price":13.49,"currency_code":"GBP","in_stock":false},{"title":"Yellow","offer_id":44112204464380,"sku":"100791","price":13.49,"currency_code":"GBP","in_stock":true},{"title":"Pink","offer_id":44112204497148,"sku":"100792","price":13.49,"currency_code":"GBP","in_stock":false},{"title":"Clear Red","offer_id":44112204529916,"sku":"100793","price":13.49,"currency_code":"GBP","in_stock":true},{"title":"Clear Pink","offer_id":44112204562684,"sku":"100794","price":13.49,"currency_code":"GBP","in_stock":false},{"title":"DMG-01 style Grey","offer_id":44112204595452,"sku":"100795","price":13.49,"currency_code":"GBP","in_stock":true},{"title":"Grey - Super Famicom Grey","offer_id":44112204628220,"sku":"100796","price":13.49,"currency_code":"GBP","in_stock":true},{"title":"Clear Orange","offer_id":44112204660988,"sku":"100797","price":13.49,"currency_code":"GBP","in_stock":true},{"title":"Black","offer_id":44112204693756,"sku":"100798","price":13.49,"currency_code":"GBP","in_stock":true},{"title":"Clear light blue (Fluorescent blue)","offer_id":44112204726524,"sku":"100799","price":13.49,"currency_code":"GBP","in_stock":false},{"title":"Clear Green (Fluorescent green)","offer_id":44112204759292,"sku":"100984","price":13.49,"currency_code":"GBP","in_stock":true},{"title":"Clear Blue (Royal blue)","offer_id":44355003777276,"sku":"300520","price":13.49,"currency_code":"GBP","in_stock":true},{"title":"Clear green (Lake green)","offer_id":44355003810044,"sku":"300522","price":13.49,"currency_code":"GBP","in_stock":true},{"title":"Bright White (Pure white)","offer_id":44355003842812,"sku":"300521","price":13.49,"currency_code":"GBP","in_stock":true},{"title":"Baby Green","offer_id":46529207402748,"sku":"300131","price":13.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/b1gxw4iibqu.jpg?v=1793999003"},{"product_id":"laminated-ita-tft-backlight-screen-kit-for-nintendo-game-boy-advance-gba-agb-funnyplaying","title":"Laminated ITA TFT backlight screen kit for Nintendo Game Boy Advance GBA AGB | Funnyplaying","description":"\u003cstrong\u003eFeatures:\r\n\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\r\n- Laminated ITA TFT backlight screen kit for Nintendo Game Boy Advance (AGB)\u003cbr\u003e- No dust issues, screen lens pre-fitted in clean environment via factory lamination.\u003cbr\u003e\r\n- Provides the original 240x160 resolution for an authentic experience.\u003cbr\u003e- No ghosting \u0026amp; better image brightness \/ color than the original screen.\u003cbr\u003e\r\n- Includes install bracket, Laminated ITA ready shell required (not included)\u003cbr\u003e\u003cbr\u003e\r\n\u003cstrong\u003eDescription:\r\n\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe ITA TFT screen kit for Game Boy Advance is now improved in a laminated version, meaning no dust issues when trying to install the lens, and a new optional dedicated shell for the screen (not included)\u003cbr\u003e\u003cbr\u003eIf you want a brighter and more vibrant display than the original screen but also want to keep the authentic pixel size, then the ITA kit for Game Boy Advance is a good option.\u003cbr\u003e\u003cbr\u003eThe screen kit reproduces the same resolution as the original display but it is much brighter, more vibrant and without any ghosting.\u003cbr\u003e\u003cbr\u003eAn original GBA screen lens size can be used with this kit, as the window size \/ image size is the same as the original. \u003cbr\u003e\u003cbr\u003eAn installation bracket is included with this screen kit, a custom shell specifically for the this laminated kit is required (not included)\u003cbr\u003e\u003cbr\u003eUsing a regular shell would require very significant cutting of the shell and is deemed almost impossible due to achieve, buying the compatible shell is really the only viable option.\u003cbr\u003e\u003cbr\u003eYou will need to solder to install this kit, if you have a 40 pin motherboard you will need to remove the C54 capacitor.\u003cbr\u003e\u003cbr\u003eThe screen kits supports adjustable brightness just like IPS kits and has a 0.15w power draw on the lowest brightness setting.\u003cbr\u003e\u003cbr\u003eCompared to the IPS versions, this screen offers many of the benefits such as bright colour, brightness but also authentic pixel size, the compromises would be that you cannot achieve the same viewing angles as IPS, it still offers good viewing angles but not to the same degree as the IPS kit.\u003cbr\u003e\u003cbr\u003eOnce installed the screen supports brightness adjustment via the a touch sensor.\u003cbr\u003e\u003cbr\u003eThis kit includes all of the items needed to fit the screen into a modified housing (not included), you can cut down your own shell to make the room for the LCD.\u003cbr\u003e\u003cbr\u003eYou will need to have some patience and good electronics skills to fit this kit although purchasing a pre-modified shell drastically reduces the effort required.\u003cbr\u003e\u003cbr\u003eAdditional tools needed include a soldering iron and solder (not included).\u003cbr\u003e\u003cbr\u003ePlease note that the LCD screen and ribbon cable require care to install and are fragile in nature, they are also more susceptible to damage once installed if the console is dropped, LCD screens can crack under pressure or with a impact, our warranty does not cover accidental \/ user damage of any components in this kit. Replacement LCD screens are available to purchase separately.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,SHARP,GUIDE\" data-zl-file=\"ZL-IF-FUNNYPLAYING-CE-LCDKIT\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Glass – sharp if broken; handle with care.\u003cbr\u003e- Wear eye protection when cutting or drilling.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Funnyplaying · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"FunnyPlaying","offers":[{"title":"Default Title","offer_id":43695643820284,"sku":"200303","price":58.72,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/trkorglnzc3.jpg?v=1793999032"},{"product_id":"laminated-ips-3-0-inch-backlight-lcd-screen-kit-for-nintendo-game-boy-advance-gba-agb-with-bracket-black-funnyplaying","title":"Laminated IPS 3.0 inch backlight LCD screen kit M2 for Nintendo Game Boy Advance GBA AGB with bracket - black | Funnyplaying","description":"\u003cstrong\u003eFeatures:\r\n\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\r\n- Laminated 3.0 IPS TFT backlight screen kit for Nintendo Game Boy Advance (AGB)\u003cbr\u003e- No dust issues, screen lens pre-fitted in clean environment via factory lamination.\u003cbr\u003e\r\n- No solder option - Soldering required for OSD features.\u003cbr\u003e- No ghosting \u0026amp; better image brightness \/ color than the original screen.\u003cbr\u003e\r\n- Shell cutting is required kit - Laminated ITA ready shell recommended.\u003cbr\u003e\u003cbr\u003e\r\n\u003cstrong\u003eDescription:\r\n\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eUpdate: New M2 screen updated model.\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThis laminated IPS screen kit is the latest iteration of the popular funnyplaying screen mod for Game Boy Advance with a vivid 3.0 inch display area.\u003cbr\u003e\u003cbr\u003eIf you want a brighter and more vibrant display with better viewing angles then this IPS kit for Game Boy Advance is a good option.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE: Please bench test the kit before fully installing to ensure that there are no issues with the product, if you do find issues please contact our support team before proceeding further.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eYou have the option of a no solder installation, which will offer brightness control but no OSD menu, to use the OSD menu you will need to do soldering of the Select, L \u0026amp; R buttons, a total of 3 wires and 6 soldering points.\u003cbr\u003e\u003cbr\u003eUsing the laminated IPS\/ITA shell is highly recommended (not included), using a regular shell would require very significant cutting of the shell and the designing of a support bracket.\u003cbr\u003e\u003cbr\u003eAn injection molded bracket is included with the kit, this bracket is for use with a laminated IPS shell from Funnyplaying, it is not compatible with any other shell type.\u003cbr\u003e\u003cbr\u003eThe screen kits supports adjustable brightness with a 0.14w power draw on the lowest brightness setting. To adjust the brightness simply touch the logo on the glass.\u003cbr\u003e\u003cbr\u003eThe full contents of the kit is as follows: Laminated glass IPS LCD screen, Driver ribbon cable, hookup wires and injection molded bracket.\u003cbr\u003e\u003cbr\u003eOnce installed the screen supports brightness adjustment via the a touch sensor.\u003cbr\u003e\u003cbr\u003eThis kit includes all of the items needed to fit the screen into a modified housing (not included), you can cut down your own shell to make the room for the LCD.\u003cbr\u003e\u003cbr\u003eYou will need to have some patience and good electronics skills to fit this kit although purchasing a pre-modified shell (once available) can drastically reduce the effort required and save you up to one hour of cutting and cleaning your own housing.\u003cbr\u003e\u003cbr\u003eAdditional tools needed include a soldering iron and solder if you wish to install the OSD menu functions.\u003cbr\u003e\u003cbr\u003ePlease note that the LCD screen and ribbon cable require care to install and are fragile in nature, they are also more susceptible to damage once installed if the console is dropped, LCD screens can crack under pressure or with a impact, our warranty does not cover accidental \/ user damage of any components in this kit. Replacement LCD screens are available to purchase separately.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,SHARP,GUIDE\" data-zl-file=\"ZL-IF-FUNNYPLAYING-CE-LCDKIT\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Glass – sharp if broken; handle with care.\u003cbr\u003e- Wear eye protection when cutting or drilling.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Funnyplaying · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"FunnyPlaying","offers":[{"title":"Default Title","offer_id":44070015729916,"sku":"100912","price":56.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/1xuhlatgplp.png?v=1794000756"},{"product_id":"replacement-laminated-ita-tft-lcd-screen-for-nintendo-game-boy-advance-3-0-screen-only-funnyplaying","title":"Replacement laminated ITA TFT LCD screen for Nintendo Game Boy Advance 3.0 (SCREEN ONLY) | Funnyplaying","description":"Features: \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e- NOTE: SCREEN Only - This item will not work without the driver ribbon sold separately.\u003c\/strong\u003e\u003cbr\u003e- Replacement ITA LCD 3.0 for Game Boy Advance - Includes laminated glass lens\u003cbr\u003e- ITA LCD only - Ideal for replacing a broken ITA screen.\u003cbr\u003e- Features original logo styling on glass.\u003cbr\u003e- Original FunnyPlaying product. \u003cbr\u003e\u003cbr\u003eDescription:\u003cbr\u003e\u003cbr\u003eNOTE: To use this product you must already own a full FunnyPlaying ITA upgrade kit with connecting ribbon, this product only replaces the screen part of the kit if it has been damaged.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis is the ITA LCD Screen ONLY - No connecting cables. This screen works with the ITA 3.0 driver ribbon (not included)\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eCompatible with Nintendo Game Boy Advance \u003cbr\u003e\u003cbr\u003eConsole will need to be disassembled to install, this will void any warranty and is done at owners risk. Please seek professional advice if unsure. \u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"HOT,VENT,SHARP,GUIDE\" data-zl-file=\"ZL-IF-FUNNYPLAYING-SCREEN\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Glass – sharp if broken; handle with care.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: FunnyPlaying · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"FunnyPlaying","offers":[{"title":"Black","offer_id":44514190819580,"sku":"300368","price":19.1,"currency_code":"GBP","in_stock":true},{"title":"White","offer_id":44514190852348,"sku":"300369","price":19.1,"currency_code":"GBP","in_stock":true},{"title":"Grey (Snes style)","offer_id":44514190885116,"sku":"300370","price":19.1,"currency_code":"GBP","in_stock":true},{"title":"Grey (Famicon style)","offer_id":44514190917884,"sku":"300371","price":19.1,"currency_code":"GBP","in_stock":true},{"title":"DMG-01 style Grey","offer_id":44514190950652,"sku":"300372","price":19.1,"currency_code":"GBP","in_stock":true},{"title":"Red Wine","offer_id":44514190983420,"sku":"300373","price":19.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/v0p5nmcfnid.jpg?v=1794001950"},{"product_id":"laminated-ips-3-0-backlight-screen-kit-for-nintendo-game-boy-advance-gba-agb-super-nintendo-grey-funnyplaying","title":"Laminated IPS 3.0 backlight screen kit for Nintendo Game Boy Advance GBA AGB - Super nintendo grey | Funnyplaying","description":"\u003cstrong\u003eFeatures:\r\n\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\r\n- Laminated 3.0 IPS TFT backlight screen kit for Nintendo Game Boy Advance (AGB)\u003cbr\u003e- No dust issues, screen lens pre-fitted in clean environment via factory lamination.\u003cbr\u003e\r\n- No solder option - Soldering required for OSD features.\u003cbr\u003e- No ghosting \u0026amp; better image brightness \/ color than the original screen.\u003cbr\u003e\r\n- Shell cutting is required kit - Laminated ITA ready shell recommended.\u003cbr\u003e\u003cbr\u003e\r\n\u003cstrong\u003eDescription:\r\n\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis laminated IPS screen kit is the latest iteration of the popular funnyplaying screen mod for Game Boy Advance with a vivid 3.0 inch display area.\u003cbr\u003e\u003cbr\u003eIf you want a brighter and more vibrant display with better viewing angles then this IPS kit for Game Boy Advance is a good option.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE: Please bench test the kit before fully installing to ensure that there are no issues with the product, if you do find issues please contact our support team before proceeding further.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eYou have the option of a no solder installation, which will offer brightness control but no OSD menu, to use the OSD menu you will need to do soldering of the Select, L \u0026amp; R buttons, a total of 3 wires and 6 soldering points.\u003cbr\u003e\u003cbr\u003eUsing the laminated IPS\/ITA shell is highly recommended (not included), using a regular shell would require very significant cutting of the shell and the designing of a support bracket.\u003cbr\u003e\u003cbr\u003eAn injection molded bracket is included with the kit, this bracket is for use with a laminated IPS shell from Funnyplaying, it is not compatible with any other shell type.\u003cbr\u003e\u003cbr\u003eThe screen kits supports adjustable brightness with a 0.14w power draw on the lowest brightness setting. To adjust the brightness simply touch the logo on the glass.\u003cbr\u003e\u003cbr\u003eThe full contents of the kit is as follows: Laminated glass IPS LCD screen, Driver ribbon cable, hookup wires, injection molded bracket and foam pad.\u003cbr\u003e\u003cbr\u003eOnce installed the screen supports brightness adjustment via the a touch sensor.\u003cbr\u003e\u003cbr\u003eThis kit includes all of the items needed to fit the screen into a modified housing (not included), you can cut down your own shell to make the room for the LCD.\u003cbr\u003e\u003cbr\u003eYou will need to have some patience and good electronics skills to fit this kit although purchasing a pre-modified shell (once available) can drastically reduce the effort required and save you up to one hour of cutting and cleaning your own housing.\u003cbr\u003e\u003cbr\u003eAdditional tools needed include a soldering iron and solder if you wish to install the OSD menu functions.\u003cbr\u003e\u003cbr\u003ePlease note that the LCD screen and ribbon cable require care to install and are fragile in nature, they are also more susceptible to damage once installed if the console is dropped, LCD screens can crack under pressure or with a impact, our warranty does not cover accidental \/ user damage of any components in this kit. Replacement LCD screens are available to purchase separately.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,SHARP,GUIDE\" data-zl-file=\"ZL-IF-FUNNYPLAYING-CE-LCDKIT\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Glass – sharp if broken; handle with care.\u003cbr\u003e- Wear eye protection when cutting or drilling.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Funnyplaying · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"FunnyPlaying","offers":[{"title":"Default Title","offer_id":45212608856316,"sku":"300266","price":63.28,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/ktylgpnxojt.jpg?v=1794004600"},{"product_id":"replacement-ribbon-driver-cable-for-nintendo-game-boy-advance-3-0-laminated-type-a-or-b-ribbon-only-funnyplaying","title":"Replacement ribbon driver cable for Nintendo Game Boy Advance 3.0 laminated TYPE A or B (Ribbon only) | Funnyplaying","description":"\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Replacement driver ribbon for Game Boy Advance Laminated kits\u003cbr\u003e- Compatible with Funny playing laminated GBA kits only\u003cbr\u003e- NOTE - There are two types, please select the one you require.\u003cbr\u003e- Ribbon only, no other parts included\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePLEASE NOTE: There are two types of this driver ribbon\u003c\/b\u003e, the one you need depends on the screen panel you have, the variance comes from different batches of IPS panels.\u003cbr\u003e\u003cbr\u003eType A has the ribbon connector to the edge of the ribbon, Type B had the ribbon connector in the middle of the ribbon.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIdentifying the one you need:\u003cbr\u003e\u003cbr\u003eSimply looking at the original ribbon is the easiest method, another check you can do is:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eType A - Screen connector to one edge, Ribbon cable on the LCD screen comes straight out of the side of the panel at 90 degrees\u003cbr\u003e\u003cbr\u003eType B - Screen connector in the middle, Ribbon cable on the IPS screen comes diagonally out of the panel at around 45 degrees\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"GUIDE\" data-zl-file=\"ZL-IF-FUNNYPLAYING-CABLE-INT\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Funnyplaying · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"FunnyPlaying","offers":[{"title":"Type A","offer_id":46191337537788,"sku":"000403","price":34.99,"currency_code":"GBP","in_stock":true},{"title":"Type B","offer_id":46191337570556,"sku":"000404","price":34.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/replacement-ribbon-driver-cable-for-nintendo-game-boy-advance-30-laminated-type-a-or-b-ribbon-only-funnyplaying000403funnyplaying-652939.jpg?v=1741475162"},{"product_id":"laminated-ita-tft-ips-3-0-ready-shell-for-nintendo-game-boy-advance-modified-no-cut-housing-agb-gba-mirror-clear-funnyplaying","title":"Laminated ITA TFT \/ IPS 3.0 ready shell for Nintendo Game Boy Advance modified no cut housing (AGB GBA) - Mirror Clear | Funnyplaying","description":"\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Laminted ITA TFT \/ IPS 3.0 screen ready housing shell for Game Boy Advance.\u003cbr\u003e- Compatible with Laminated ITA or IPS Funnyplaying screen kits.\u003cbr\u003e- Shell requires a ITA \/ IPS screen bracket (included with screen kits)\u003cbr\u003e- Includes screws and rear housing sticker.\u003cbr\u003e- ITA \/ IPS screen kit not included, Housing only.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eA glossy mirror clear version of the laminated ITA \/ IPS ready housing shell for Nintendo Game Boy Advance from Funnyplaying, it provides a no cut solution for the laminated ITA \/ IPS 3.0\" screen kits as well as Lipo battery mods.\u003cbr\u003e\u003cbr\u003eThis shell has a very significant screen opening and is only designed for use with laminated ITA \u0026amp; laminated IPS kits.\u003cbr\u003e\u003cbr\u003eIf you are looking for a textured finish shell please check the following page: \u003cbr\u003e\u003cbr\u003ehttps:\/\/www.zedlabz.com\/products\/laminated-ita-tft-ips-3-0-ready-shell-for-nintendo-game-boy-advance-modified-no-cut-housing-agb-gba-funnyplaying?_pos=2\u0026amp;_sid=7a9057622\u0026amp;_ss=r\u003cbr\u003e\u003cbr\u003eThe overall size and appearance of the shell closely resembles the original game boy advance, this is however glossy in appearance being a mirror clear shell, the surface does not have any texture, it is smooth and shiny.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eThese are not suitable for other brands of laminated screen kit, they are specifically for Funnyplaying laminated screens only.\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe battery bay has been made to be empty and open, which will still accept AA batteries or a lipo battery mod.\u003cbr\u003e\u003cbr\u003eThe front shell screen window is enlarged to allow a laminated panel to be used, a bracket is needed to hold the ITA or IPS laminated kit (not included with the shell but with the screen kit)\u003cbr\u003e\u003cbr\u003eAvoid having to use DIY cutting methods, the cutting would be so significant that you could easily spend hours cutting, and its likely a mistake would be made.\u003cbr\u003e\u003cbr\u003eThis is a front and back housing ONLY, no ITA \/ IPS kit, bracket or screen lens or buttons included, included parts are as follows: Front and back housing, battery terminal contact, battery cover, rear sticker, screw set.\u003cbr\u003e\u003cbr\u003eA tri-wing screwdriver is needed to dissemble your console (not included).\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,GUIDE\" data-zl-file=\"ZL-IF-FUNNYPLAYING-SHELL\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Funnyplaying · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"FunnyPlaying","offers":[{"title":"Mirror Clear","offer_id":46529219854588,"sku":"200373","price":13.49,"currency_code":"GBP","in_stock":true},{"title":"Mirror Clear Black","offer_id":46529219887356,"sku":"200374","price":13.49,"currency_code":"GBP","in_stock":true},{"title":"Mirror Glitter Clear (Pearl)","offer_id":46529219920124,"sku":"200375","price":13.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/dmty12l5c5f.jpg?v=1794005857"},{"product_id":"laminated-ips-30-backlight-screen-kit-m2-for-nintendo-game-boy-advance-gba-agb-black-yellow-funnyplaying","title":"Laminated IPS 3.0 inch backlight LCD screen kit M2 for Nintendo Game Boy Advance GBA AGB with bracket - black \/ yellow | Funnyplaying","description":"\u003cb\u003eFeatures:\r\n\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\r\n- Laminated 3.0 IPS TFT backlight screen kit M2 for Nintendo Game Boy Advance (AGB)\u003cbr\u003e- No dust issues, screen lens pre-fitted in clean environment via factory lamination.\u003cbr\u003e\r\n- All features accessible by touch control, soldering controls is optional.\u003cbr\u003e- No ghosting \u0026amp; better image brightness \/ color than the original screen.\u003cbr\u003e\r\n- Custom Laminated ITA\/IPS ready shell required.\u003cbr\u003e\u003cbr\u003e\r\n\u003cb\u003eDescription:\r\n\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThis is a slightly updated version of the popular Funnyplaying laminated IPS screen kit for Game Boy Advance with a 3.0 inch display area.\u003cbr\u003e\u003cbr\u003eIf you want a brighter and more vibrant display than the original screen but also want to keep the authentic pixel size, then the ITA kit for Game Boy Advance is a good option.\u003cbr\u003e\u003cbr\u003eThe updated M2 panel exhibits a 99% coverage of the sRGB color gamut and achieves a maximum luminance of 500 cd\/m².\u003cbr\u003e\u003cbr\u003eThe settings are held in the memory when powered off, and on the lowest brightness the screen kit consumes 0.27w.\u003cbr\u003e\u003cbr\u003eThe screen kit reprovides a much brighter, more vibrant image than the original display, without any ghosting.\u003cbr\u003e\u003cbr\u003eYou have the option of a no solder installation, with touch controls to access the on screen display (OSD) menu.\u003cbr\u003e\u003cbr\u003eUsing the laminated IPS\/ITA shell is highly recommended (not included), using a regular shell would require very significant cutting of the shell and the designing of a support bracket.\u003cbr\u003e\u003cbr\u003eAn injection molded bracket is included with the kit, this bracket is for use with a laminated IPS shell from Funnyplaying, it is not compatible with any other shell type.\u003cbr\u003e\u003cbr\u003eThe screen kits supports adjustable brightness with a 0.14w power draw on the lowest brightness setting. To adjust the brightness simply touch the logo on the glass.\u003cbr\u003e\u003cbr\u003eThe full contents of the kit is as follows: Laminated glass IPS LCD screen, Driver ribbon cable, hookup wires, injection molded bracket and foam pad.\u003cbr\u003e\u003cbr\u003eOnce installed the screen supports brightness adjustment via the a touch sensor.\u003cbr\u003e\u003cbr\u003eThis kit includes all of the items needed to fit the screen into a modified housing (not included), you can cut down your own shell to make the room for the LCD.\u003cbr\u003e\u003cbr\u003eYou will need to have some patience and good electronics skills to fit this kit although purchasing a pre-modified shell (once available) can drastically reduce the effort required and save you up to one hour of cutting and cleaning your own housing.\u003cbr\u003e\u003cbr\u003eAdditional tools needed include a soldering iron and solder if you wish to install the OSD menu functions.\u003cbr\u003e\u003cbr\u003ePlease note that the LCD screen and ribbon cable require care to install and are fragile in nature, they are also more susceptible to damage once installed if the console is dropped, LCD screens can crack under pressure or with a impact, our warranty does not cover accidental \/ user damage of any components in this kit. Replacement LCD screens are available to purchase separately.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,SHARP,GUIDE\" data-zl-file=\"ZL-IF-FUNNYPLAYING-CE-LCDKIT\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Glass – sharp if broken; handle with care.\u003cbr\u003e- Wear eye protection when cutting or drilling.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Funnyplaying · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"FunnyPlaying","offers":[{"title":"Default Title","offer_id":46789805244668,"sku":"000705","price":56.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/2tdwkn0vrdg.jpg?v=1794008163"},{"product_id":"laminated-ips-30-backlight-screen-kit-m2-for-nintendo-game-boy-advance-gba-agb-black-yellow-red-funnyplaying","title":"Laminated IPS 3.0 inch backlight LCD screen kit M2 for Nintendo Game Boy Advance GBA AGB with bracket - black \/ yellow red logo | Funnyplaying","description":"\u003cb\u003eFeatures:\r\n\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\r\n- Laminated 3.0 IPS TFT backlight screen kit M2 for Nintendo Game Boy Advance (AGB)\u003cbr\u003e- No dust issues, screen lens pre-fitted in clean environment via factory lamination.\u003cbr\u003e\r\n- All features accessible by touch control, soldering controls is optional.\u003cbr\u003e- No ghosting \u0026amp; better image brightness \/ color than the original screen.\u003cbr\u003e\r\n- Custom Laminated ITA\/IPS ready shell required.\u003cbr\u003e\u003cbr\u003e\r\n\u003cb\u003eDescription:\r\n\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThis is a slightly updated version of the popular Funnyplaying laminated IPS screen kit for Game Boy Advance with a 3.0 inch display area.\u003cbr\u003e\u003cbr\u003eIf you want a brighter and more vibrant display than the original screen but also want to keep the authentic pixel size, then the ITA kit for Game Boy Advance is a good option.\u003cbr\u003e\u003cbr\u003eThe updated M2 panel exhibits a 99% coverage of the sRGB color gamut and achieves a maximum luminance of 500 cd\/m².\u003cbr\u003e\u003cbr\u003eThe settings are held in the memory when powered off, and on the lowest brightness the screen kit consumes 0.27w.\u003cbr\u003e\u003cbr\u003eThe screen kit reprovides a much brighter, more vibrant image than the original display, without any ghosting.\u003cbr\u003e\u003cbr\u003eYou have the option of a no solder installation, with touch controls to access the on screen display (OSD) menu.\u003cbr\u003e\u003cbr\u003eUsing the laminated IPS\/ITA shell is highly recommended (not included), using a regular shell would require very significant cutting of the shell and the designing of a support bracket.\u003cbr\u003e\u003cbr\u003eAn injection molded bracket is included with the kit, this bracket is for use with a laminated IPS shell from Funnyplaying, it is not compatible with any other shell type.\u003cbr\u003e\u003cbr\u003eThe screen kits supports adjustable brightness with a 0.14w power draw on the lowest brightness setting. To adjust the brightness simply touch the logo on the glass.\u003cbr\u003e\u003cbr\u003eThe full contents of the kit is as follows: Laminated glass IPS LCD screen, Driver ribbon cable, hookup wires, injection molded bracket and foam pad.\u003cbr\u003e\u003cbr\u003eOnce installed the screen supports brightness adjustment via the a touch sensor.\u003cbr\u003e\u003cbr\u003eThis kit includes all of the items needed to fit the screen into a modified housing (not included), you can cut down your own shell to make the room for the LCD.\u003cbr\u003e\u003cbr\u003eYou will need to have some patience and good electronics skills to fit this kit although purchasing a pre-modified shell (once available) can drastically reduce the effort required and save you up to one hour of cutting and cleaning your own housing.\u003cbr\u003e\u003cbr\u003eAdditional tools needed include a soldering iron and solder if you wish to install the OSD menu functions.\u003cbr\u003e\u003cbr\u003ePlease note that the LCD screen and ribbon cable require care to install and are fragile in nature, they are also more susceptible to damage once installed if the console is dropped, LCD screens can crack under pressure or with a impact, our warranty does not cover accidental \/ user damage of any components in this kit. Replacement LCD screens are available to purchase separately.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,SHARP,GUIDE\" data-zl-file=\"ZL-IF-FUNNYPLAYING-CE-LCDKIT\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Glass – sharp if broken; handle with care.\u003cbr\u003e- Wear eye protection when cutting or drilling.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Funnyplaying · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"FunnyPlaying","offers":[{"title":"Default Title","offer_id":46924196086012,"sku":"000739","price":56.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/5mzli0azevu.jpg?v=1794008662"},{"product_id":"injection-molded-bracket-for-nintendo-game-boy-advance-laminated-ips-ita-screen-clear-funnyplaying","title":"Replacement mounting bracket for Nintendo Game Boy Advance laminated IPS \/ ITA screen - Clear | FunnyPlaying","description":"\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\r\n\u003cul\u003e\r\n  \u003cli\u003eOfficial FunnyPlaying replacement bracket for laminated GBA screen kits\u003c\/li\u003e\r\n  \u003cli\u003eCompatible with ITA laminated and IPS 3.0 laminated displays\u003c\/li\u003e\r\n  \u003cli\u003eWorks exclusively with FunnyPlaying Laminated 3.0 GBA shells\u003c\/li\u003e\r\n  \u003cli\u003eSecures the laminated screen in place as part of the mounting system\u003c\/li\u003e\r\n  \u003cli\u003eInjection-moulded part identical to the bracket supplied in the full kit\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\r\n\u003cp\u003e\r\nThis official FunnyPlaying bracket is designed for use with ITA and IPS 3.0 laminated display kits for the Game Boy Advance. In these laminated builds, the bracket is not just an alignment piece, it is part of the mounting system that secures the display inside the shell, ensuring the correct alignment and final fit.\r\n\u003c\/p\u003e\r\n\r\n\u003cp\u003e\r\nLaminated 3.0 displays require a specific FunnyPlaying Laminated 3.0 shell, and this bracket is engineered for that shell only. If the original bracket included with your kit has been lost, cracked or damaged, this replacement allows you to continue your installation without purchasing a full screen kit again.\r\n\u003c\/p\u003e\r\n\r\n\u003cp\u003e\r\nThis listing includes the bracket only. No screen, shell, adhesive or tools are included.\r\n\u003c\/p\u003e\r\n\r\n\u003cb\u003eFurther Info:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\r\n\u003cul\u003e\r\n  \u003cli\u003eOfficial FunnyPlaying replacement part\u003c\/li\u003e\r\n  \u003cli\u003eFor laminated GBA displays only (ITA \/ IPS 3.0)\u003c\/li\u003e\r\n  \u003cli\u003eNot compatible with IPS Max laminated screens\u003c\/li\u003e\r\n  \u003cli\u003eRequires a FunnyPlaying Laminated 3.0 GBA shell\u003c\/li\u003e\r\n  \u003cli\u003eIncludes: 1× bracket only\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cb\u003eFAQ:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\r\n\r\n\u003cp\u003e\u003cb\u003eQ: Why does this bracket only work with Laminated 3.0 shells?\u003c\/b\u003e\u003cbr\u003e\r\nLaminated 3.0 screens use a specific mounting system built into the shell. This bracket fits that design and locks the screen in place.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cb\u003eQ: Will this work with IPS Max laminated displays?\u003c\/b\u003e\u003cbr\u003e\r\nNo. IPS Max screens use no brackets and a different shell format.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cb\u003eQ: Is this identical to the bracket included with the kit?\u003c\/b\u003e\u003cbr\u003e\r\nYes. It is the same injection-moulded part supplied with FunnyPlaying’s ITA and IPS 3.0 laminated kits.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cb\u003eQ: What is included?\u003c\/b\u003e\u003cbr\u003e\r\nThis listing includes only the bracket. It does not include the screen, shell or tools.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"GUIDE\" data-zl-file=\"ZL-IF-FUNNYPLAYING-OTHER\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: FunnyPlaying · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"FunnyPlaying","offers":[{"title":"Default Title","offer_id":48516118675708,"sku":"200846","price":3.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/replacement-mounting-bracket-for-nintendo-game-boy-advance-laminated-ips-ita-screen-clear-funnyplayingfunnyplaying-3946830.jpg?v=1763573016"},{"product_id":"replacement-screen-only-for-m2-laminated-ips-30-game-boy-advance-gba-black-funnyplaying","title":"Replacement M2 Laminated IPS 3.0 LCD screen for Nintendo Game Boy Advance GBA - Black (screen only) | Funnyplaying","description":"\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\r\n\u003cul\u003e\r\n  \u003cli\u003eOfficial FunnyPlaying replacement laminated LCD for GBA M2 IPS 3.0 kits\u003c\/li\u003e\r\n  \u003cli\u003eComplete laminated assembly with bonded glass lens and IPS display\u003c\/li\u003e\r\n  \u003cli\u003eIdeal replacement for cracked glass, damaged LCDs or torn ribbons\u003c\/li\u003e\r\n  \u003cli\u003eCompatible only with M2 versions of the laminated 3.0 GBA kits\u003c\/li\u003e\r\n  \u003cli\u003eScreen-only spare part – no bracket, shell or driver components included\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\r\n\u003cp\u003e\r\nThis official FunnyPlaying laminated LCD is a direct replacement for the M2 version of the laminated IPS 3.0 display kit for the Game Boy Advance. It includes the full laminated assembly, the IPS panel bonded to the protective front glass screen lens, exactly as supplied in the full kit.\r\n\u003c\/p\u003e\r\n\r\n\u003cp\u003e\r\nA replacement laminated LCD is needed when the original screen has been cracked, scratched during use, or the ribbon cable has been torn when installing (or further modding the console). Because the glass and IPS panel are permanently bonded, any damage to the surface or underlying LCD requires replacing the entire laminated module.\r\n\u003c\/p\u003e\r\n\r\n\u003cp\u003e\r\nThis screen is compatible only with M2 laminated kits. It is not compatible with the first-generation (non-M2) laminated 3.0 kits and cannot be used as a standalone upgrade. You must already have the full laminated M2 kit — including the driver board, ribbon, bracket and laminated shell for this screen to be usable.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cb\u003eNOTE: Before fitting, the screen should be bench tested with the protective film still applied to confirm functionality and compatibility with your existing parts.\r\n\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eTo identify if you have an M2 display, refer to the ribbon cable style attached to the LCD, the M2 version has a large \"L\" shape as shown in the image, if your bad screen matches this ribbon shape, you have an M2 screen. If in doubt, contact our support team for assistance in identifying what you have.\u003c\/p\u003e\r\n\r\n\u003cb\u003eCompatibility Overview:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\r\n\r\n\u003ctable\u003e\r\n  \u003ctbody\u003e\n\u003ctr\u003e\r\n    \u003cth\u003eKit \/ Version\u003c\/th\u003e\r\n    \u003cth\u003eCompatible?\u003c\/th\u003e\r\n    \u003cth\u003eNotes\u003c\/th\u003e\r\n  \u003c\/tr\u003e\r\n  \u003ctr\u003e\r\n    \u003ctd\u003eGBA Laminated IPS 3.0 (M2 Version)\u003c\/td\u003e\r\n    \u003ctd\u003e\u003cb\u003eYes\u003c\/b\u003e\u003c\/td\u003e\r\n    \u003ctd\u003eCorrect version — requires original M2 driver, ribbon and bracket\u003c\/td\u003e\r\n  \u003c\/tr\u003e\r\n  \u003ctr\u003e\r\n    \u003ctd\u003eGBA Laminated IPS 3.0 (Non-M2 \/ First Gen)\u003c\/td\u003e\r\n    \u003ctd\u003e\u003cb\u003eNo\u003c\/b\u003e\u003c\/td\u003e\r\n    \u003ctd\u003eDifferent driver board — not compatible\u003c\/td\u003e\r\n  \u003c\/tr\u003e\r\n  \u003ctr\u003e\r\n    \u003ctd\u003eGBA IPS Max Kits\u003c\/td\u003e\r\n    \u003ctd\u003e\u003cb\u003eNo\u003c\/b\u003e\u003c\/td\u003e\r\n    \u003ctd\u003eDifferent display format and kit\u003c\/td\u003e\r\n  \u003c\/tr\u003e\r\n  \u003ctr\u003e\r\n    \u003ctd\u003eUnmodded Game Boy Advance\u003c\/td\u003e\r\n    \u003ctd\u003e\u003cb\u003eNo\u003c\/b\u003e\u003c\/td\u003e\r\n    \u003ctd\u003eSpare part only — cannot be installed without a full laminated kit\u003c\/td\u003e\r\n  \u003c\/tr\u003e\r\n\u003c\/tbody\u003e\n\u003c\/table\u003e\r\n\r\n\u003cbr\u003e\u003cb\u003eFurther Info:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\r\n\u003cul\u003e\r\n  \u003cli\u003eOfficial FunnyPlaying replacement part\u003c\/li\u003e\r\n  \u003cli\u003eFor laminated GBA displays (M2 IPS 3.0 only)\u003c\/li\u003e\r\n  \u003cli\u003eNot compatible with non-M2 laminated kits or IPS Max\u003c\/li\u003e\r\n  \u003cli\u003eRequires the original M2 driver board, ribbon, bracket and laminated shell (not included)\u003c\/li\u003e\r\n  \u003cli\u003eIncludes: 1× laminated LCD screen only\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cb\u003eFAQ:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\r\n\r\n\u003cp\u003e\u003cb\u003eQ: Will this upgrade my Game Boy Advance on its own?\u003c\/b\u003e\u003cbr\u003e\r\nNo. This is a spare part for owners of the laminated M2 IPS kit. It cannot operate without the original driver board and associated hardware.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cb\u003eQ: How do I know if my display is damaged?\u003c\/b\u003e\u003cbr\u003e\r\nCommon signs include ink-like blotches, scrambled or distorted images, no image, dark spots, or visible cracks in the laminated glass.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cb\u003eQ: Will this fit the non-M2 laminated kits?\u003c\/b\u003e\u003cbr\u003e\r\nNo. Only M2 laminated kits use this specific LCD module.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cb\u003eQ: What is included?\u003c\/b\u003e\u003cbr\u003e\r\nThis listing includes the laminated LCD screen only. No shell, bracket, ribbon, adhesive or tools are included.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cb\u003eQ: Should I test the screen before fitting?\u003c\/b\u003e\u003cbr\u003e\r\nYes. Bench-test the screen with the protective film intact to confirm correct operation and compatibility before installation.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SHARP,GUIDE\" data-zl-file=\"ZL-TF-SCREEN-S99-004\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e- Glass – sharp if broken; handle with care.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"FunnyPlaying","offers":[{"title":"Default Title","offer_id":48516255744252,"sku":"800965","price":18.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/replacement-m2-laminated-ips-30-lcd-screen-for-nintendo-game-boy-advance-gba-black-screen-only-funnyplayingfunnyplaying-6055206.jpg?v=1763573015"},{"product_id":"laminated-ita-tft-30-backlight-screen-kit-for-nintendo-game-boy-advance-gba-agb-white-funnyplaying","title":"Laminated ITA TFT 3.0 backlight screen kit for Nintendo Game Boy Advance GBA AGB - White | Funnyplaying","description":"\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eLaminated ITA TFT screen kit for Game Boy Advance GBA AGB\u003c\/li\u003e\r\n\u003cli\u003eLens pre-laminated to screen assembly\u003c\/li\u003e\r\n\u003cli\u003e240x160 resolution matching original GBA display\u003c\/li\u003e\r\n\u003cli\u003eBrightness adjustment supported via touch sensor\u003c\/li\u003e\r\n\u003cli\u003eRequires laminated shell for install\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\r\nUpgrade your Game Boy Advance with this laminated ITA TFT screen kit, designed to improve visibility while maintaining the original look and feel of the console. The laminated design means the lens is pre-fitted to the display, removing the need to align a separate lens during installation.\u003cbr\u003e\u003cbr\u003e\r\n\r\nIt retains the original 240x160 resolution, making it suitable for users who prefer the original pixel structure while improving brightness and clarity compared to the stock screen.\u003cbr\u003e\u003cbr\u003e\r\n\r\nThe kit is intended for users carrying out a screen upgrade or repair. Once installed, the display supports adjustable brightness via a touch sensor, allowing you to adapt the screen to different lighting conditions.\u003cbr\u003e\u003cbr\u003e\r\n\r\n\u003cb\u003eBefore you begin:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\r\nPlease carry out a bench test before installing this screen. Connect the screen while it is outside of the console and power on the device to confirm it is working correctly.\u003cbr\u003e\u003cbr\u003e\r\n\r\nKeep all protective films and labels in place during testing. Do not remove these until you are satisfied the screen is functioning as expected.\u003cbr\u003e\u003cbr\u003e\r\n\r\nIf you notice any issue during testing, please contact support before proceeding with installation. Screens and ribbon cables are fragile, so care should be taken during handling and fitting.\u003cbr\u003e\u003cbr\u003e\r\n\r\n\u003cb\u003eFurther info:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\r\nThis laminated ITA TFT kit is designed for the Game Boy Advance AGB model. The display and lens are pre-laminated, which helps reduce the chance of dust entering between the lens and screen during installation.\u003cbr\u003e\u003cbr\u003e\r\n\r\nInstallation typically requires a modified shell. A laminated ITA ready shell is recommended, as using a standard shell will require significant cutting to fit the display.\u003cbr\u003e\u003cbr\u003e\r\n\r\nFor 40 pin motherboard versions, removal of the C54 capacitor may be required for compatibility.\u003cbr\u003e\u003cbr\u003e\r\n\r\nThe screen supports adjustable brightness levels and has a low power draw on lower brightness settings.\u003cbr\u003e\u003cbr\u003e\r\n\r\nCompared to IPS kits, this display maintains the original resolution and pixel structure. Viewing angles may differ compared to IPS displays.\u003cbr\u003e\u003cbr\u003e\r\n\r\nThe kit includes the components required to install the screen into a modified housing. Additional tools such as a soldering iron and solder are required (tools not included).\u003cbr\u003e\u003cbr\u003e\r\n\r\n\u003cb\u003eInstallation tips:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eBench test the screen before final installation\u003c\/li\u003e\r\n\u003cli\u003eUse a laminated ready shell to reduce cutting requirements\u003c\/li\u003e\r\n\u003cli\u003eHandle the ribbon cable and LCD carefully during installation\u003c\/li\u003e\r\n\u003cli\u003eUse good quality batteries to help avoid power related issues\u003c\/li\u003e\r\n\u003cli\u003eLight refurbishment such as cleaning the power switch can help improve performance\u003c\/li\u003e\r\n\u003cli\u003eReplacing aging capacitors can help improve power stability for screen upgrades\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cbr\u003e\r\n\r\n\u003cb\u003eFAQ:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\r\nQ: What is the difference between this and an IPS screen?\u003cbr\u003e\r\nA: This screen keeps the original GBA resolution and pixel structure, while IPS kits typically offer different scaling and viewing characteristics.\u003cbr\u003e\u003cbr\u003e\r\n\r\nQ: Does this kit require soldering?\u003cbr\u003e\r\nA: Soldering is typically required for brightness control and full functionality.\u003cbr\u003e\u003cbr\u003e\r\n\r\nQ: Do I need to modify my shell?\u003cbr\u003e\r\nA: Yes, most standard shells require cutting. A laminated ITA ready shell is recommended.\u003cbr\u003e\u003cbr\u003e\r\n\r\nQ: What should I do before installing the screen?\u003cbr\u003e\r\nA: It is recommended to carry out a bench test before installation. Connect the screen while outside of the console and confirm it is working correctly before fitting it into the shell. Keep protective films in place during testing and contact support if you notice any issues before installation.\u003cbr\u003e\u003cbr\u003eThis is a third party product and is not manufactured, sponsored, endorsed or licensed by Nintendo.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,SHARP,GUIDE\" data-zl-file=\"ZL-IF-FUNNYPLAYING-CE-LCDKIT\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Glass – sharp if broken; handle with care.\u003cbr\u003e- Wear eye protection when cutting or drilling.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Funnyplaying · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"FunnyPlaying","offers":[{"title":"Default Title","offer_id":48662351479036,"sku":"300396","price":54.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/laminated-ita-tft-30-backlight-screen-kit-for-nintendo-game-boy-advance-gba-agb-white-funnyplayingfunnyplaying-6035625.jpg?v=1768083018"},{"product_id":"laminated-ita-tft-30-backlight-screen-kit-for-nintendo-game-boy-advance-gba-agb-red-wine-funnyplaying","title":"Laminated ITA TFT 3.0 backlight screen kit for Nintendo Game Boy Advance GBA AGB - Famicom red | Funnyplaying","description":"\u003cb\u003eFeatures:\r\n\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\r\n- Laminated ITA TFT backlight screen kit for Nintendo Game Boy Advance (AGB)\u003cbr\u003e- No dust issues, screen lens pre-fitted in clean environment via factory lamination.\u003cbr\u003e\r\n- Provides the original 240x160 resolution for an authentic experience.\u003cbr\u003e- No ghosting \u0026amp; better image brightness \/ color than the original screen.\u003cbr\u003e\r\n- Shell cutting is required kit - Laminated ITA ready shell recommended.\u003cbr\u003e\u003cbr\u003e\r\n\u003cb\u003eDescription:\r\n\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe ITA TFT screen kit for Game Boy Advance is now improved in a laminated version, meaning no dust issues when trying to install the lens, and a new optional dedicated shell for the screen (not included)\u003cbr\u003e\u003cbr\u003eIf you want a brighter and more vibrant display than the original screen but also want to keep the authentic pixel size, then the ITA kit for Game Boy Advance is a good option.\u003cbr\u003e\u003cbr\u003eThe screen kit reproduces the same resolution as the original display but it is much brighter, more vibrant and without any ghosting.\u003cbr\u003e\u003cbr\u003eAn original GBA screen lens size can be used with this kit, as the window size \/ image size is the same as the original. \u003cbr\u003e\u003cbr\u003eSoldering and cutting of the shell will normally be required to install this kit, using the laminated ITA shell is highly recommended (not included), using a regular shell would require very significant cutting of the shell.\u003cbr\u003e\u003cbr\u003eIf you have a 40 pin motherboard you will need to remove the C54 capacitor.\u003cbr\u003e\u003cbr\u003eThe screen kits supports adjustable brightness just like IPS kits and has a 0.15w power draw on the lowest brightness setting.\u003cbr\u003e\u003cbr\u003eCompared to the IPS versions, this screen offers many of the benefits such as bright colour, brightness but also authentic pixel size, the compromises would be that you cannot achieve the same viewing angles as IPS, it still offers good viewing angles but not to the same degree as the IPS kit.\u003cbr\u003e\u003cbr\u003eOnce installed the screen supports brightness adjustment via the a touch sensor.\u003cbr\u003e\u003cbr\u003eThis kit includes all of the items needed to fit the screen into a modified housing (not included), you can cut down your own shell to make the room for the LCD.\u003cbr\u003e\u003cbr\u003eYou will need to have some patience and good electronics skills to fit this kit although purchasing a pre-modified shell (once available) can drastically reduce the effort required and save you up to one hour of cutting and cleaning your own housing.\u003cbr\u003e\u003cbr\u003eAdditional tools needed include a soldering iron and solder (not included).\u003cbr\u003e\u003cbr\u003ePlease note that the LCD screen and ribbon cable require care to install and are fragile in nature, they are also more susceptible to damage once installed if the console is dropped, LCD screens can crack under pressure or with a impact, our warranty does not cover accidental \/ user damage of any components in this kit. Replacement LCD screens are available to purchase separately.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,SHARP,GUIDE\" data-zl-file=\"ZL-IF-FUNNYPLAYING-CE-LCDKIT\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Glass – sharp if broken; handle with care.\u003cbr\u003e- Wear eye protection when cutting or drilling.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Funnyplaying · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"FunnyPlaying","offers":[{"title":"Default Title","offer_id":48662526787836,"sku":"300377","price":54.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/laminated-ita-tft-30-backlight-screen-kit-for-nintendo-game-boy-advance-gba-agb-famicom-red-funnyplayingfunnyplaying-1296152.jpg?v=1768083014"},{"product_id":"laminated-ita-tft-30-backlight-screen-kit-for-nintendo-game-boy-advance-gba-agb-dmg-grey-funnyplaying","title":"Laminated ITA TFT screen kit for Game Boy Advance 3.0 GBA AGB DMG grey | Funnyplaying","description":"\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eLaminated ITA TFT screen kit for Game Boy Advance GBA AGB\u003c\/li\u003e\r\n\u003cli\u003eLens pre-laminated to screen assembly\u003c\/li\u003e\r\n\u003cli\u003e240x160 resolution matching original GBA display\u003c\/li\u003e\r\n\u003cli\u003eBrightness adjustment supported via touch sensor\u003c\/li\u003e\r\n\u003cli\u003eRequires laminated shell for install\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\r\nUpgrade your Game Boy Advance with this laminated ITA TFT screen kit, designed to improve visibility while maintaining the original look and feel of the console. The laminated design means the lens is pre-fitted to the display, removing the need to align a separate lens during installation.\u003cbr\u003e\u003cbr\u003e\r\n\r\nIt retains the original 240x160 resolution, making it suitable for users who prefer the original pixel structure while improving brightness and clarity compared to the stock screen.\u003cbr\u003e\u003cbr\u003e\r\n\r\nThe kit is intended for users carrying out a screen upgrade or repair. Once installed, the display supports adjustable brightness via a touch sensor, allowing you to adapt the screen to different lighting conditions.\u003cbr\u003e\u003cbr\u003e\r\n\r\n\u003cb\u003eBefore you begin:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\r\nPlease carry out a bench test before installing this screen. Connect the screen while it is outside of the console and power on the device to confirm it is working correctly.\u003cbr\u003e\u003cbr\u003e\r\n\r\nKeep all protective films and labels in place during testing. Do not remove these until you are satisfied the screen is functioning as expected.\u003cbr\u003e\u003cbr\u003e\r\n\r\nIf you notice any issue during testing, please contact support before proceeding with installation. Screens and ribbon cables are fragile, so care should be taken during handling and fitting.\u003cbr\u003e\u003cbr\u003e\r\n\r\n\u003cb\u003eFurther info:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\r\nThis laminated ITA TFT kit is designed for the Game Boy Advance AGB model. The display and lens are pre-laminated, which helps reduce the chance of dust entering between the lens and screen during installation.\u003cbr\u003e\u003cbr\u003e\r\n\r\nInstallation typically requires a modified shell. A laminated ITA ready shell is recommended, as using a standard shell will require significant cutting to fit the display.\u003cbr\u003e\u003cbr\u003e\r\n\r\nFor 40 pin motherboard versions, removal of the C54 capacitor may be required for compatibility.\u003cbr\u003e\u003cbr\u003e\r\n\r\nThe screen supports adjustable brightness levels and has a low power draw on lower brightness settings.\u003cbr\u003e\u003cbr\u003e\r\n\r\nCompared to IPS kits, this display maintains the original resolution and pixel structure. Viewing angles may differ compared to IPS displays.\u003cbr\u003e\u003cbr\u003e\r\n\r\nThe kit includes the components required to install the screen into a modified housing. Additional tools such as a soldering iron and solder are required (tools not included).\u003cbr\u003e\u003cbr\u003e\r\n\r\n\u003cb\u003eInstallation tips:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eBench test the screen before final installation\u003c\/li\u003e\r\n\u003cli\u003eUse a laminated ready shell to reduce cutting requirements\u003c\/li\u003e\r\n\u003cli\u003eHandle the ribbon cable and LCD carefully during installation\u003c\/li\u003e\r\n\u003cli\u003eUse good quality batteries to help avoid power related issues\u003c\/li\u003e\r\n\u003cli\u003eLight refurbishment such as cleaning the power switch can help improve performance\u003c\/li\u003e\r\n\u003cli\u003eReplacing aging capacitors can help improve power stability for screen upgrades\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cbr\u003e\r\n\r\n\u003cb\u003eFAQ:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\r\nQ: What is the difference between this and an IPS screen?\u003cbr\u003e\r\nA: This screen keeps the original GBA resolution and pixel structure, while IPS kits typically offer different scaling and viewing characteristics.\u003cbr\u003e\u003cbr\u003e\r\n\r\nQ: Does this kit require soldering?\u003cbr\u003e\r\nA: Soldering is typically required for brightness control and full functionality.\u003cbr\u003e\u003cbr\u003e\r\n\r\nQ: Do I need to modify my shell?\u003cbr\u003e\r\nA: Yes, most standard shells require cutting. A laminated ITA ready shell is recommended.\u003cbr\u003e\u003cbr\u003e\r\n\r\nQ: What should I do before installing the screen?\u003cbr\u003e\r\nA: It is recommended to carry out a bench test before installation. Connect the screen while outside of the console and confirm it is working correctly before fitting it into the shell. Keep protective films in place during testing and contact support if you notice any issues before installation.\u003cbr\u003e\u003cbr\u003eThis is a third party product and is not manufactured, sponsored, endorsed or licensed by Nintendo.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,SHARP,GUIDE\" data-zl-file=\"ZL-IF-FUNNYPLAYING-CE-LCDKIT\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Glass – sharp if broken; handle with care.\u003cbr\u003e- Wear eye protection when cutting or drilling.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Funnyplaying · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"FunnyPlaying","offers":[{"title":"Default Title","offer_id":48897700200700,"sku":"300378","price":54.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/laminated-ita-tft-screen-kit-for-game-boy-advance-30-gba-agb-dmg-grey-funnyplayingfunnyplaying-9099292.jpg?v=1774856683"},{"product_id":"laminated-ita-tft-30-backlight-screen-kit-for-nintendo-game-boy-advance-gba-agb-super-famicom-grey-funnyplaying","title":"Laminated ITA TFT screen kit for Game Boy Advance 3.0 GBA AGB Super famicom grey | Funnyplaying","description":"\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eLaminated ITA TFT screen kit for Game Boy Advance GBA AGB\u003c\/li\u003e\r\n\u003cli\u003eLens pre-laminated to screen assembly\u003c\/li\u003e\r\n\u003cli\u003e240x160 resolution matching original GBA display\u003c\/li\u003e\r\n\u003cli\u003eBrightness adjustment supported via touch sensor\u003c\/li\u003e\r\n\u003cli\u003eRequires laminated shell for install\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\r\nUpgrade your Game Boy Advance with this laminated ITA TFT screen kit, designed to improve visibility while maintaining the original look and feel of the console. The laminated design means the lens is pre-fitted to the display, removing the need to align a separate lens during installation.\u003cbr\u003e\u003cbr\u003e\r\n\r\nIt retains the original 240x160 resolution, making it suitable for users who prefer the original pixel structure while improving brightness and clarity compared to the stock screen.\u003cbr\u003e\u003cbr\u003e\r\n\r\nThe kit is intended for users carrying out a screen upgrade or repair. Once installed, the display supports adjustable brightness via a touch sensor, allowing you to adapt the screen to different lighting conditions.\u003cbr\u003e\u003cbr\u003e\r\n\r\n\u003cb\u003eBefore you begin:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\r\nPlease carry out a bench test before installing this screen. Connect the screen while it is outside of the console and power on the device to confirm it is working correctly.\u003cbr\u003e\u003cbr\u003e\r\n\r\nKeep all protective films and labels in place during testing. Do not remove these until you are satisfied the screen is functioning as expected.\u003cbr\u003e\u003cbr\u003e\r\n\r\nIf you notice any issue during testing, please contact support before proceeding with installation. Screens and ribbon cables are fragile, so care should be taken during handling and fitting.\u003cbr\u003e\u003cbr\u003e\r\n\r\n\u003cb\u003eFurther info:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\r\nThis laminated ITA TFT kit is designed for the Game Boy Advance AGB model. The display and lens are pre-laminated, which helps reduce the chance of dust entering between the lens and screen during installation.\u003cbr\u003e\u003cbr\u003e\r\n\r\nInstallation typically requires a modified shell. A laminated ITA ready shell is recommended, as using a standard shell will require significant cutting to fit the display.\u003cbr\u003e\u003cbr\u003e\r\n\r\nFor 40 pin motherboard versions, removal of the C54 capacitor may be required for compatibility.\u003cbr\u003e\u003cbr\u003e\r\n\r\nThe screen supports adjustable brightness levels and has a low power draw on lower brightness settings.\u003cbr\u003e\u003cbr\u003e\r\n\r\nCompared to IPS kits, this display maintains the original resolution and pixel structure. Viewing angles may differ compared to IPS displays.\u003cbr\u003e\u003cbr\u003e\r\n\r\nThe kit includes the components required to install the screen into a modified housing. Additional tools such as a soldering iron and solder are required (tools not included).\u003cbr\u003e\u003cbr\u003e\r\n\r\n\u003cb\u003eInstallation tips:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eBench test the screen before final installation\u003c\/li\u003e\r\n\u003cli\u003eUse a laminated ready shell to reduce cutting requirements\u003c\/li\u003e\r\n\u003cli\u003eHandle the ribbon cable and LCD carefully during installation\u003c\/li\u003e\r\n\u003cli\u003eUse good quality batteries to help avoid power related issues\u003c\/li\u003e\r\n\u003cli\u003eLight refurbishment such as cleaning the power switch can help improve performance\u003c\/li\u003e\r\n\u003cli\u003eReplacing aging capacitors can help improve power stability for screen upgrades\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cbr\u003e\r\n\r\n\u003cb\u003eFAQ:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\r\nQ: What is the difference between this and an IPS screen?\u003cbr\u003e\r\nA: This screen keeps the original GBA resolution and pixel structure, while IPS kits typically offer different scaling and viewing characteristics.\u003cbr\u003e\u003cbr\u003e\r\n\r\nQ: Does this kit require soldering?\u003cbr\u003e\r\nA: Soldering is typically required for brightness control and full functionality.\u003cbr\u003e\u003cbr\u003e\r\n\r\nQ: Do I need to modify my shell?\u003cbr\u003e\r\nA: Yes, most standard shells require cutting. A laminated ITA ready shell is recommended.\u003cbr\u003e\u003cbr\u003e\r\n\r\nQ: What should I do before installing the screen?\u003cbr\u003e\r\nA: It is recommended to carry out a bench test before installation. Connect the screen while outside of the console and confirm it is working correctly before fitting it into the shell. Keep protective films in place during testing and contact support if you notice any issues before installation.\u003cbr\u003e\u003cbr\u003eThis is a third party product and is not manufactured, sponsored, endorsed or licensed by Nintendo.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,SHARP,GUIDE\" data-zl-file=\"ZL-IF-FUNNYPLAYING-CE-LCDKIT\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Glass – sharp if broken; handle with care.\u003cbr\u003e- Wear eye protection when cutting or drilling.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Funnyplaying · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"FunnyPlaying","offers":[{"title":"Default Title","offer_id":48897715699964,"sku":"300379","price":54.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/laminated-ita-tft-screen-kit-for-game-boy-advance-30-gba-agb-super-famicom-grey-funnyplayingfunnyplaying-8379402.jpg?v=1774856683"},{"product_id":"laminated-ita-tft-30-backlight-screen-kit-for-nintendo-game-boy-advance-gba-agb-snes-grey-funnyplaying","title":"Laminated ITA TFT screen kit for Game Boy Advance 3.0 GBA AGB Snes grey | Funnyplaying","description":"\u003cb\u003eFeatures:\r\n\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\r\n- Laminated ITA TFT backlight screen kit for Nintendo Game Boy Advance (AGB)\u003cbr\u003e- No dust issues, screen lens pre-fitted in clean environment via factory lamination.\u003cbr\u003e\r\n- Provides the original 240x160 resolution for an authentic experience.\u003cbr\u003e- No ghosting \u0026amp; better image brightness \/ color than the original screen.\u003cbr\u003e\r\n- Shell cutting is required kit - Laminated ITA ready shell recommended.\u003cbr\u003e\u003cbr\u003e\r\n\u003cb\u003eDescription:\r\n\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe ITA TFT screen kit for Game Boy Advance is now improved in a laminated version, meaning no dust issues when trying to install the lens, and a new optional dedicated shell for the screen (not included)\u003cbr\u003e\u003cbr\u003eIf you want a brighter and more vibrant display than the original screen but also want to keep the authentic pixel size, then the ITA kit for Game Boy Advance is a good option.\u003cbr\u003e\u003cbr\u003eThe screen kit reproduces the same resolution as the original display but it is much brighter, more vibrant and without any ghosting.\u003cbr\u003e\u003cbr\u003eAn original GBA screen lens size can be used with this kit, as the window size \/ image size is the same as the original. \u003cbr\u003e\u003cbr\u003eSoldering and cutting of the shell will normally be required to install this kit, using the laminated ITA shell is highly recommended (not included), using a regular shell would require very significant cutting of the shell.\u003cbr\u003e\u003cbr\u003eIf you have a 40 pin motherboard you will need to remove the C54 capacitor.\u003cbr\u003e\u003cbr\u003eThe screen kits supports adjustable brightness just like IPS kits and has a 0.15w power draw on the lowest brightness setting.\u003cbr\u003e\u003cbr\u003eCompared to the IPS versions, this screen offers many of the benefits such as bright colour, brightness but also authentic pixel size, the compromises would be that you cannot achieve the same viewing angles as IPS, it still offers good viewing angles but not to the same degree as the IPS kit.\u003cbr\u003e\u003cbr\u003eOnce installed the screen supports brightness adjustment via the a touch sensor.\u003cbr\u003e\u003cbr\u003eThis kit includes all of the items needed to fit the screen into a modified housing (not included), you can cut down your own shell to make the room for the LCD.\u003cbr\u003e\u003cbr\u003eYou will need to have some patience and good electronics skills to fit this kit although purchasing a pre-modified shell (once available) can drastically reduce the effort required and save you up to one hour of cutting and cleaning your own housing.\u003cbr\u003e\u003cbr\u003eAdditional tools needed include a soldering iron and solder (not included).\u003cbr\u003e\u003cbr\u003ePlease note that the LCD screen and ribbon cable require care to install and are fragile in nature, they are also more susceptible to damage once installed if the console is dropped, LCD screens can crack under pressure or with a impact, our warranty does not cover accidental \/ user damage of any components in this kit. Replacement LCD screens are available to purchase separately.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,SHARP,GUIDE\" data-zl-file=\"ZL-IF-FUNNYPLAYING-CE-LCDKIT\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Glass – sharp if broken; handle with care.\u003cbr\u003e- Wear eye protection when cutting or drilling.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Funnyplaying · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"FunnyPlaying","offers":[{"title":"Default Title","offer_id":48897719402748,"sku":"300395","price":54.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/laminated-ita-tft-screen-kit-for-game-boy-advance-30-gba-agb-snes-grey-funnyplayingfunnyplaying-9391620.jpg?v=1774856683"},{"product_id":"replacement-screen-only-for-laminated-ips-30-game-boy-advance-gba-super-famicom-grey-funnyplaying","title":"Replacement laminated IPS LCD screen for Nintendo Game Boy Advance 3.0 (SCREEN ONLY) - TYPE B Super Famicom | Funnyplaying","description":"\u003cb\u003eFeatures: \u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- NOTE: SCREEN Only - This item will not work without the driver ribbon sold separately.\u003cbr\u003e- Replacement IPS LCD 3.0 for Game Boy Advance - Includes laminated glass lens\u003cbr\u003e- IPS LCD only - Ideal for replacing a broken IPS screen.\u003cbr\u003e- Features original logo styling on glass.\u003cbr\u003e- Original FunnyPlaying product. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNOTE: To use this product you must already own a full FunnyPlaying IPS upgrade kit with connecting ribbon, this product only replaces the screen part of the kit if it has been damaged.\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eALSO NOTE THE RIBBON CABLE DESIGN\u003c\/b\u003e, there are two versions, please purchase the right one by comparing the ribbon design with the picture provided.\u003cbr\u003e\u003cbr\u003eThis is the IPS LCD Screen ONLY - No connecting cables. This screen works with the IPS 3.0 driver ribbon (not included).\u003cbr\u003e\u003cbr\u003eCompatible with Nintendo Game Boy Advance Console will need to be disassembled to install, this will void any warranty and is done at owners risk. Please seek professional advice if unsure. \u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SHARP,GUIDE\" data-zl-file=\"ZL-IF-FUNNYPLAYING-SCREEN\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e- Glass – sharp if broken; handle with care.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: FunnyPlaying · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"FunnyPlaying","offers":[{"title":"Default Title","offer_id":49588117831932,"sku":"300363","price":18.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/replacement-laminated-ips-lcd-screen-for-nintendo-game-boy-advance-30-screen-only-type-b-super-famicom-funnyplayingfunnyplaying-5175365.jpg?v=1784092939"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/collections\/laminated-ita-tft-screen-kit-for-game-boy-advance-30-gba-agb-dmg-grey-funnyplayingfunnyplaying-9099292.jpg?v=1795076371","url":"https:\/\/www.zedlabz.com\/en-no\/collections\/funnyplaying-laminated-ips-ita-screens-shells-for-game-boy-advance.oembed","provider":"ZedLabz","version":"1.0","type":"link"}