{"title":"IPS Screens \u0026 Display Mods for Game Boy Advance SP","description":"\u003cp\u003eUpgrade your Game Boy Advance SP (AGS-001 and AGS-101) with a brighter, sharper screen. Shop IPS and laminated LCD screen kits, backlight mods, polarisers and replacement screens, plus the ribbon cables and brackets that go with them. IPS kits bring vivid colour, adjustable brightness and better viewing angles; check whether a kit needs shell trimming or a specific screen lens before ordering.\u003c\/p\u003e","products":[{"product_id":"zedlabz-replacement-backlit-lcd-screen-for-nintendo-game-boy-advance-gba-ags-101","title":"ZedLabz replacement backlit LCD screen for Nintendo Game Boy Advance GBA AGS-101","description":"\u003cstrong\u003eFeatures:\r\n\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\r\n- Top \/ Upper LCD Display Screen for Game Boy Advance\u003cbr\u003e\r\n- Complete modular part with built in backlight as would be found in AGS-101 models\u003cbr\u003e\r\n- Ideal mod for an improved image in all lighting conditions.\u003cbr\u003e\r\n- Requires adapter cable for non backlit Game Boy Advance models.\u003cbr\u003e\r\n- Console must be dissembled to install.\u003cbr\u003e\u003cbr\u003e\r\n\u003cstrong\u003eDescription:\r\n\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\r\nHigh quality replacement top LCD screen for Nintendo Game Boy Advance with built in backlight.\r\n\u003cbr\u003e\u003cbr\u003e\r\nA great mod for refurbishing a console to modern standards of gaming.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SHARP,GUIDE\" data-zl-file=\"ZL-TF-SCREEN-S00-004\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e- Glass – sharp if broken; handle with care.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":28844300165,"sku":"400314","price":79.77,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/zedlabz-replacement-backlit-lcd-screen-for-nintendo-game-boy-advance-gba-ags-101zedlabz-2082483.jpg?v=1794008900"},{"product_id":"replacement-3-19-laminated-lcd-screen-for-nintendo-game-boy-advance-sp-for-v2-ips-mod-kits-zedlabz","title":"Replacement 3.19\" Laminated LCD screen for Nintendo Game Boy Advance SP for V2 IPS mod kits | Funnyplaying","description":"\u003cstrong\u003eFeatures:\r\n\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\r\n- IPS LCD screen replacement for Game Boy Advance SP consoles.\u003cbr\u003e- NOTE: Replacement Screen only - Ribbon not included.\u003cbr\u003e\r\n- Latest generation with bonded screen lens.\u003cbr\u003e\r\n- centered position ready for installation into a modded shell.\u003cbr\u003e\r\n- 3.19\" screen size with Advance SP logo.\u003cbr\u003e\u003cbr\u003e\r\n\u003cstrong\u003eDescription:\r\n\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eA replacement bonded Game Boy Advance SP LCD screen compatible with V2 IPS kits such as funny playing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE: This is a screen only\u003c\/strong\u003e and does not include the ribbon cable, it is ideal for replacing a screen that has become damaged or has failed.\u003cbr\u003e\u003cbr\u003ePlease note that the LCD screen requires care to install and are fragile in nature, they are also more susceptible to damage once installed if the console is dropped, LCD screens can crack under pressure or with a impact, our warranty does not cover accidental \/ user damage of any components.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SHARP,GUIDE\" data-zl-file=\"ZL-IF-FUNNYPLAYING-SCREEN\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e- Glass – sharp if broken; handle with care.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: FunnyPlaying · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"FunnyPlaying","offers":[{"title":"Default Title","offer_id":31478261776486,"sku":"700805","price":18.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/rocqdivmrp3.jpg?v=1793982591"},{"product_id":"laminated-ips-lcd-screen-kit-for-nintendo-game-boy-advance-sp-no-solder-backlight-display-gba-sp-hispeedido","title":"Laminated IPS LCD screen kit for Nintendo Game Boy Advance SP no solder backlight display GBA SP | HISPEEDIDO","description":"\u003cstrong\u003eFeatures:\r\n\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\r\n- IPS LCD screen and ribbon for Nintendo Game Boy Advance SP consoles.\u003cbr\u003e\r\n- Laminated screen lens \u0026amp; no screen tearing\u003cbr\u003e\r\n- Centered position ready for installation into a modded shell.\u003cbr\u003e\r\n- 3.19\" screen size with Advance SP logo.\u003cbr\u003e\r\n- Optional Soldering required for brightness control.\u003cbr\u003e\u003cbr\u003e\r\n\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eUpgrade your Game Boy Advance SP display from the dull stock screen to a vivid and bright IPS LCD, with the same resolution as original oem display.\u003cbr\u003e\u003cbr\u003eThe pack includes the LCD panel with laminated screen lens and the ribbon flex cable.\u003cbr\u003e\u003cbr\u003eThis kit from Hispeedido is often referred to as the one chip IPS kit, and is comparable in performance to other brands such as Funnyplaying V2 kit, you can use this on  both AGS-001 \u0026amp; AGS-101 systems.\u003cbr\u003e\u003cbr\u003eNo soldering is required to use this kit with the default full brightness, if you wish to be able to adjust the brightness then a single wire needs to be soldered to the IPS ribbon and pad Q12B on the motherboard.\u003cbr\u003e\u003cbr\u003eInstalling the soldered wire is optional, if fitted this will allow 10 levels of brightness adjustment.\u003cbr\u003e\u003cbr\u003eA IPS ready shell or DIY shell cutting is required for the screen to fit, the top lid of the shell needs plastic trimmed from one side on standard non IPS shells.\u003cbr\u003e\u003cbr\u003eItems needed which are not included: Modified console housing, game boy motherboard, basic tools to fit this screen, soldering iron (optional), non of these items are included.\u003cbr\u003e\u003cbr\u003eYou will need to have some patience and basic electronics skills to fit this kit.\u003cbr\u003e\u003cbr\u003eThis kit contains: LCD screen, ribbon cable \u0026amp; foam.\u003cbr\u003e\u003cbr\u003ePlease note that the LCD screen and ribbon cable require care to install and are fragile in nature, they are also more susceptible to damage once installed if the console is dropped, LCD screens can crack under pressure or with a impact, our warranty does not cover accidental \/ user damage of any components in this kit. Replacement parts will be available to purchase separately in the near future.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,SHARP,GUIDE\" data-zl-file=\"ZL-IF-HISPEEDIDO-CE-LCDKIT\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Glass – sharp if broken; handle with care.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Hispeedido · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Hispeedido","offers":[{"title":"Black","offer_id":42931432128764,"sku":"100602","price":49.99,"currency_code":"GBP","in_stock":true},{"title":"White","offer_id":42931432194300,"sku":"100603","price":49.99,"currency_code":"GBP","in_stock":true},{"title":"Red Wine","offer_id":42931432227068,"sku":"100604","price":49.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/products\/laminated-ips-lcd-screen-kit-for-nintendo-game-boy-advance-sp-no-solder-backlight-display-gba-sp-hispeedido100602zedlabz-774422.jpg?v=1741475706"},{"product_id":"replacement-3-19-bonded-ips-lcd-screen-for-nintendo-game-boy-advance-sp-hispeedido","title":"Replacement 3.19\" bonded IPS LCD screen for Nintendo Game Boy Advance SP | Hispeedido","description":"\u003cstrong\u003eFeatures:\r\n\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\r\n- IPS LCD screen replacement for Game Boy Advance SP consoles.\u003cbr\u003e- NOTE: Replacement Screen only - Ribbon not included.\u003cbr\u003e\r\n- Glass lens is adhered to the IPS LCD panel.\u003cbr\u003e\r\n- Compatible with Hispeedido \"one chip\" kits\u003cbr\u003e\r\n- 3.19\" screen size with Advance SP logo.\u003cbr\u003e\u003cbr\u003e\r\n\u003cstrong\u003eDescription:\r\n\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eA replacement bonded Game Boy Advance SP LCD screen compatible with Hispeedido \"one chip\" ips ribbon cables.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE: This is a screen only\u003c\/strong\u003e and does not include the ribbon cable or other parts, it is ideal for replacing a screen that has become damaged or has failed.\u003cbr\u003e\u003cbr\u003ePlease note that the LCD screen requires care to install and are fragile in nature, they are also more susceptible to damage once installed if the console is dropped, LCD screens can crack under pressure or with a impact, our warranty does not cover accidental \/ user damage of any components.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SHARP,GUIDE\" data-zl-file=\"ZL-IF-HISPEEDIDO-OTHER\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e- Glass – sharp if broken; handle with care.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Hispeedido · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Hispeedido","offers":[{"title":"Default Title","offer_id":43681790787836,"sku":"200438","price":17.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/products\/replacement-319-bonded-ips-lcd-screen-for-nintendo-game-boy-advance-sp-hispeedido200438hispeedido-104415.jpg?v=1741475638"},{"product_id":"replacement-3-19-laminated-lcd-screen-for-nintendo-game-boy-advance-sp-for-v2-ips-mod-kits-red-wine-burgundy-funnyplaying","title":"Replacement 3.19\" Laminated LCD screen for Nintendo Game Boy Advance SP for V2 IPS mod kits - Red wine Burgundy | Funnyplaying","description":"\u003cstrong\u003eFeatures:\r\n\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\r\n- IPS LCD screen replacement for Game Boy Advance SP consoles.\u003cbr\u003e- NOTE: Replacement Screen only - Ribbon not included.\u003cbr\u003e\r\n- Latest generation with bonded screen lens.\u003cbr\u003e\r\n- centered position ready for installation into a modded shell.\u003cbr\u003e\r\n- 3.19\" screen size with Advance SP logo.\u003cbr\u003e\u003cbr\u003e\r\n\u003cstrong\u003eDescription:\r\n\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eA replacement bonded Game Boy Advance SP LCD screen compatible with V2 IPS kits such as funny playing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE: This is a screen only\u003c\/strong\u003e and does not include the ribbon cable, it is ideal for replacing a screen that has become damaged or has failed.\u003cbr\u003e\u003cbr\u003ePlease note that the LCD screen requires care to install and are fragile in nature, they are also more susceptible to damage once installed if the console is dropped, LCD screens can crack under pressure or with a impact, our warranty does not cover accidental \/ user damage of any components.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SHARP,GUIDE\" data-zl-file=\"ZL-IF-FUNNYPLAYING-SCREEN\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e- Glass – sharp if broken; handle with care.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: FunnyPlaying · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"FunnyPlaying","offers":[{"title":"Default Title","offer_id":43720555626748,"sku":"100557","price":17.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/me31wu1cuuv.jpg?v=1793999321"},{"product_id":"laminated-3-0-ips-lcd-screen-kit-for-nintendo-game-boy-advance-sp-no-solder-drop-in-backlight-display-gba-sp-ags-hispeedido","title":"Laminated 3.0 IPS LCD screen kit for Nintendo Game Boy Advance SP no solder drop in backlight display [GBA SP AGS] | HISPEEDIDO","description":"\u003cstrong\u003eFeatures:\r\n\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\r\n- Drop in IPS LCD screen for Nintendo Game Boy Advance SP consoles.\u003cbr\u003e\r\n- No shell cutting, does not require IPS ready shell\u003cbr\u003e\r\n- Brightness, colour and display mode touch sensors built in\u003cbr\u003e\r\n- 3.00\" screen size with traditional Advance SP logo on glass\u003cbr\u003e\r\n- Optional single wire to solder for OSD menu controls.\u003cbr\u003e\u003cbr\u003e\r\n\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis drop in IPS screen upgrade from Hispeedido gives you a bright and vibrant display upgrade, without any need for modifications, special housing shells, or soldering tools.\u003cbr\u003e\u003cbr\u003eFitting this IPS screen kit is super simple, there is no PCBS to attach, no ribbon additional ribbon cables, no touch sensors to mount, no screen lens to align, it is a drop in plug and play upgrade.\u003cbr\u003e\u003cbr\u003eThe IPS screen includes the LCD panel with laminated screen lens and ribbon cable all as one single unit, and that is it, you can choose to install a single wire included with the screen to allow you to control the brightness from the original button on the console and access an OSD menu, but this is completely optional and not required.\u003cbr\u003e\u003cbr\u003eThis upgrade will drop straight into most shells, cutting of a regular shell is not required, and an IPS ready shell is not needed. \u003cbr\u003e\u003cbr\u003eThe screen upgrade supports 15 levels of brightness, 8 different colour modes and 4 display modes, default display mode, retro pixel effect and 2 scan line effects.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE: You should bench test the screen before installation to check for any issues, this helps us to support your warranty, you should leave the adhesive backing and protective film on the product until you are satisfied it is working correctly and there are no pixel faults etc, if you discover any faults please send a picture of the bench test to support@zedlabz.com for assistance.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eHow to use the touch sensors:\u003cbr\u003e\u003cbr\u003e- Tap the right sensor to cycle the brightness levels.\u003cbr\u003e- Press and hold the right sensor to cycle the 8 colour modes\u003cbr\u003e- Press and hold the left sensor to cycle pixel effect modes.\u003cbr\u003e\u003cbr\u003eInstalling the soldered wire is optional (single wire from the LCD ribbon to Q12B), if fitted this will allow brightness control from the original brightness button and provide access to an OSD menu.\u003cbr\u003e\u003cbr\u003eOther items needed which are not included:  Basic tools to open the game boy and fit this screen, soldering iron (optional), non of these items are included.\u003cbr\u003e\u003cbr\u003ePlease note that the LCD screen and ribbon cable require care to install and are fragile in nature, they are also more susceptible to damage once installed if the console is dropped, LCD screens can crack under pressure or with a impact, our warranty does not cover accidental \/ user damage of any components in this kit. Replacement parts will be available to purchase separately in the near future.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,SHARP,GUIDE\" data-zl-file=\"ZL-IF-HISPEEDIDO-CE-LCDKIT\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Glass – sharp if broken; handle with care.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Hispeedido · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Hispeedido","offers":[{"title":"Black","offer_id":44361771647228,"sku":"300463","price":56.99,"currency_code":"GBP","in_stock":true},{"title":"White","offer_id":44361771679996,"sku":"300548","price":56.99,"currency_code":"GBP","in_stock":true},{"title":"Red (Red Wine)","offer_id":44361771712764,"sku":"300549","price":56.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/ox1oreevhhc.jpg?v=1794001655"},{"product_id":"laminated-3-0-inch-ita-backlight-lcd-screen-kit-for-nintendo-game-boy-advance-sp","title":"Laminated 3.0 inch ITA backlight LCD screen kit for Nintendo Game Boy Advance SP","description":"\u003cstrong\u003eFeatures:\r\n\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\r\n- 3.00 laminated ITA LCD kit with optional OSD for Game Boy Advance SP.\u003cbr\u003e\r\n- Laminated screen - Plug and play install with some soldering required.\u003cbr\u003e\r\n- Additonal wire to Q12B on the motherboard allows brightness control.\u003cbr\u003e\r\n- 3.00\" screen size with traditional Advance SP logo.\u003cbr\u003e\r\n- Can be installed into an IPS ready Funnyplaying SP housing shell.\u003cbr\u003e\u003cbr\u003e\r\n\u003cstrong\u003eDescription:\r\n\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eGive your SP a modern upgrade with a traditional look, the ITA version of the laminated SP screen kit from funnyplaying provides the traditional look of the AGS-101 display with better colours and a brighter backlight.\u003cbr\u003e\u003cbr\u003eThe screen can only be installed with soldering, a single wire is also soldered between the driver ribbon and Q12B on the motherboard.\u003cbr\u003e\u003cbr\u003eYou will need an IPS ready shell, we recommend using the ones from Funnyplaying which is IPS ready and compatible with this screen. Alternatively you can trim some plastic from the inside of the top lid on a non IPS shell to install this screen but we do recommend getting the shell made for this screen.\u003cbr\u003e\u003cbr\u003eThe pack includes the LCD panel (with laminated screen lens), the driver ribbon cable, and adhesive foam pad \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE: Please bench test the kit before fully installing to ensure that there are no issues with the product, if you do find issues please contact our support team before proceeding further.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eOnce installed you can enjoy fantastic picture clarity with no screen tearing.\u003cbr\u003e\u003cbr\u003eOther items needed which are not included: Basic screwdriver tools to fit the screen, soldering iron and solder, non of these items are included.\u003cbr\u003e\u003cbr\u003eYou will need to have some patience and take care when installing this kit, it can be installed by beginners however there are quirks and challenges when working on a Game Boy, youtube offers a range of useful take apart videos that we recommend watching if your unsure about how to take the console apart.\u003cbr\u003e\u003cbr\u003eFunnyplaying official installation guide is found here: https:\/\/funnyplaying.com\/blogs\/gameboy-advance-news\/tutorial-for-gbasp-laminate-itasp-kit\u003cbr\u003e\u003cbr\u003ePlease note that the LCD screen and ribbon cable require care to install and are fragile in nature, ribbon cables can be ripped during install without proper care, the LCD are also more susceptible to damage once installed if the console is dropped, LCD screens can crack under pressure or with a impact, our warranty does not cover accidental \/ user damage of any components in this kit. Replacement parts will be available to purchase separately in the near future.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,HOT,VENT,SHARP,GUIDE\" data-zl-file=\"ZL-IF-FUNNYPLAYING-CE-LCDKIT\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Glass – sharp if broken; handle with care.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Funnyplaying · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"FunnyPlaying","offers":[{"title":"Default Title","offer_id":44446282154236,"sku":"300257","price":54.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/2xajte1j1at.jpg?v=1794001887"},{"product_id":"3-0-inch-laminated-m2-ips-lcd-screen-kit-for-nintendo-game-boy-advance-sp-ags-gba-sp-funnyplaying","title":"3.0 Inch Laminated M2 IPS LCD screen kit for Nintendo Game Boy Advance SP [AGS GBA SP] | Funnyplaying","description":"\u003cb\u003eFeatures:\r\n\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\r\n- 3.00 laminated M2 IPS LCD kit with OSD for Game Boy Advance SP.\u003cbr\u003e\r\n- Laminated screen - Plug and play install with no soldering required.\u003cbr\u003e\r\n- Optional single wire soldering to control brightness via the original button.\u003cbr\u003e\r\n- 3.00\" screen size with Advance SP logo.\u003cbr\u003e\r\n- Can be installed into OEM or a Funnyplaying SP Shell (select option).\u003cbr\u003e\u003cbr\u003e\r\n\u003cb\u003eDescription:\r\n\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe M2 IPS is an updated version of the laminated 3.0 inch IPS display for GBA SP, requiring no soldering to use all the features including the OSD menu.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eChoose a model of kit according to the shell you want to use:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eYou can fit this screen to OEM original and clone shells selecting \"For OEM original housing shell\" option\u003cbr\u003e\u003cbr\u003eYou can fit this screen to a Funny Playing custom shell selecting \"For custom Funnyplaying housing shell\" option\u003cbr\u003e\u003cbr\u003eAll OSD function operations can be done via touch control, soldering is not required for these functions, an optional brightness wire can be fitted if required.\u003cbr\u003e\u003cbr\u003eThe panel exhibits a 99% coverage of the sRGB color gamut and achieves a maximum luminance of 500 cd\/m².\r\n\u003cbr\u003e\u003cbr\u003eThe screen kit has power-off memory, holding the previous settings such as the brightness level.\r\n\u003cbr\u003e\u003cbr\u003eAt the lowest brightness, the kit power consumption is 0.27w\u003cbr\u003e\u003cbr\u003e\u003cb\u003eHow the two kit options differ:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe screen kit itself is the same for both options, but the taps are adjusted according to the shell it is for, and a bracket is included in the customised shell option as it is needed for a Funnyplaying shell.\u003cbr\u003e\u003cbr\u003eThere are two options for this kit, a kit with folded metal taps for OEM original shells (inc clone shells) and a kit with flat taps and a bracket for use in the Funnyplaying customised IPS ready shell.\u003cbr\u003e\u003cbr\u003eKits are pre-configured for the shell you want to use to avoid the screen getting damaged.\u003cbr\u003e\u003cbr\u003eEach kit includes the IPS LCD panel (with laminated screen lens), the driver ribbon cable, PCB driver board and hookup wire (optional install). Kits for Customised Funnyplaying shells also include a bracket.\u003cbr\u003e\u003cbr\u003e*A single wire can be installed to control brightness from the original brightness button.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNOTE: Please bench test the kit before fully installing to ensure that there are no issues with the product, if you do find issues please contact our support team before proceeding further.\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eOther items needed which are not included: Basic screwdriver tools to fit the screen, optional soldering iron, non of these items are included.\u003cbr\u003e\u003cbr\u003eYou will need to have some patience and take care when installing this kit, it can be installed by beginners however there are quirks and challenges when working on a Game Boy, youtube offers a range of useful take apart videos that we recommend watching if your unsure about how to take the console apart.\u003cbr\u003e\u003cbr\u003ePlease note that the LCD screen and ribbon cable require care to install and are fragile in nature, ribbon cables can be ripped during install without proper care, the LCD are also more susceptible to damage once installed if the console is dropped, LCD screens can crack under pressure or with a impact, our warranty does not cover accidental \/ user damage of any components in this kit. Replacement parts will be available to purchase separately in the near future.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,SHARP,GUIDE\" data-zl-file=\"ZL-IF-FUNNYPLAYING-CE-LCDKIT\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Glass – sharp if broken; handle with care.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Funnyplaying · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"FunnyPlaying","offers":[{"title":"For orignal OEM housing shells \/ clone shells (folded tabs)","offer_id":46534936887548,"sku":"000477","price":54.99,"currency_code":"GBP","in_stock":true},{"title":"For custom FunnyPlaying housing shells (Flat tabs includes bracket)","offer_id":46534936920316,"sku":"000478","price":54.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/zmdzgyltuyk.png?v=1794006005"},{"product_id":"replacement-screen-only-for-laminated-ips-30-game-boy-advance-sp-gba-sp-black-funnyplaying-funnyplaying","title":"Replacement M2 Laminated IPS 3.0 LCD screen for Nintendo Game Boy Advance SP GBA SP - Black (screen only) | Funnyplaying","description":"\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\r\n\u003cul\u003e\r\n  \u003cli\u003eOfficial FunnyPlaying replacement laminated LCD for GBA SP M2 IPS 3.0 kits\u003c\/li\u003e\r\n  \u003cli\u003eComplete laminated assembly with bonded glass lens and IPS panel\u003c\/li\u003e\r\n  \u003cli\u003eIdeal for replacing cracked glass, damaged displays or torn ribbon cables\u003c\/li\u003e\r\n  \u003cli\u003eCompatible only with the M2 version of the Laminated 3.0 GBA SP kit\u003c\/li\u003e\r\n  \u003cli\u003eScreen only spare part – no bracket, shell or driver board included\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\r\n\u003cp\u003e\r\nThis official FunnyPlaying laminated LCD is the direct replacement unit for the M2 version of the Laminated IPS 3.0 display kit for the Game Boy Advance SP. The assembly includes the fully laminated IPS panel and protective front glass screen lens, identical to the part supplied in the full M2 laminated kit.\r\n\u003c\/p\u003e\r\n\r\n\u003cp\u003e\r\nA replacement screen is essential if the original has been cracked, scratched, damaged during use, or if the ribbon cable was torn during install (or further modding the console). Because the front glass and IPS panel are laminated together, any damage to either component requires replacing the entire laminated module.\r\n\u003c\/p\u003e\r\n\r\n\u003cp\u003e\r\nThis replacement is only compatible with the M2 Laminated 3.0 kit for GBA SP. It does not work with the earlier non-M2 laminated kits, nor with 3.19\" IPS kits. It cannot function alone and requires the original M2 driver board, ribbon, bracket and laminated SP shell.\r\n\u003c\/p\u003e\r\n\r\n\u003cp\u003e\r\nBefore installing, bench-test the display with the protective film still applied to confirm correct function and compatibility with your existing M2 components.\r\n\u003c\/p\u003e\r\n\r\n\u003cb\u003eCompatibility Overview:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\r\n\r\n\u003ctable\u003e\r\n  \u003ctbody\u003e\n\u003ctr\u003e\r\n    \u003cth\u003eKit \/ Version\u003c\/th\u003e\r\n    \u003cth\u003eCompatible?\u003c\/th\u003e\r\n    \u003cth\u003eNotes\u003c\/th\u003e\r\n  \u003c\/tr\u003e\r\n  \u003ctr\u003e\r\n    \u003ctd\u003eGBA SP Laminated IPS 3.0 (M2 Version)\u003c\/td\u003e\r\n    \u003ctd\u003e\u003cb\u003eYes\u003c\/b\u003e\u003c\/td\u003e\r\n    \u003ctd\u003eCorrect version — requires original M2 driver, ribbon, bracket and laminated shell\u003c\/td\u003e\r\n  \u003c\/tr\u003e\r\n  \u003ctr\u003e\r\n    \u003ctd\u003eGBA SP Laminated IPS 3.0 (Non-M2 \/ First Gen)\u003c\/td\u003e\r\n    \u003ctd\u003e\u003cb\u003eNo\u003c\/b\u003e\u003c\/td\u003e\r\n    \u003ctd\u003eUses a different driver board\u003c\/td\u003e\r\n  \u003c\/tr\u003e\r\n  \u003ctr\u003e\r\n    \u003ctd\u003eGBA SP 3.19\" IPS Kit\u003c\/td\u003e\r\n    \u003ctd\u003e\u003cb\u003eNo\u003c\/b\u003e\u003c\/td\u003e\r\n    \u003ctd\u003eDifferent design, not interchangeable\u003c\/td\u003e\r\n  \u003c\/tr\u003e\r\n  \u003ctr\u003e\r\n    \u003ctd\u003eUnmodded Game Boy Advance SP\u003c\/td\u003e\r\n    \u003ctd\u003e\u003cb\u003eNo\u003c\/b\u003e\u003c\/td\u003e\r\n    \u003ctd\u003eScreen cannot operate without a full M2 laminated kit\u003c\/td\u003e\r\n  \u003c\/tr\u003e\r\n\u003c\/tbody\u003e\n\u003c\/table\u003e\r\n\r\n\u003cbr\u003e\u003cb\u003eFurther Info:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\r\n\u003cul\u003e\r\n  \u003cli\u003eOfficial FunnyPlaying replacement part for GBA SP Laminated IPS 3.0 (M2 only)\u003c\/li\u003e\r\n  \u003cli\u003eNot compatible with non-M2 laminated kits or 3.19\" IPS displays\u003c\/li\u003e\r\n  \u003cli\u003eRequires original M2 driver board, ribbon, bracket and laminated shell\u003c\/li\u003e\r\n  \u003cli\u003eLaminated glass and IPS panel supplied as one bonded assembly\u003c\/li\u003e\r\n  \u003cli\u003eIncludes: 1× laminated LCD screen only\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cb\u003eFAQ:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\r\n\r\n\u003cp\u003e\u003cb\u003eQ: Will this upgrade my unmodified GBA SP on its own?\u003c\/b\u003e\u003cbr\u003e\r\nNo. This is a replacement part for customers who already own the M2 laminated IPS kit. It cannot function without the original kit hardware.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cb\u003eQ: How do I know if my screen is damaged?\u003c\/b\u003e\u003cbr\u003e\r\nSigns include ink-like blotches, distorted or scrambled images, no image output, dark areas, or visible cracks in the glass.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cb\u003eQ: Can this replace the screen in a non-M2 laminated kit?\u003c\/b\u003e\u003cbr\u003e\r\nNo. The M2 and non-M2 displays are not interchangeable.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cb\u003eQ: What is included?\u003c\/b\u003e\u003cbr\u003e\r\nThis listing includes the laminated LCD screen only. No driver board, ribbon, shell or tools are included.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cb\u003eQ: Should I test the screen before installation?\u003c\/b\u003e\u003cbr\u003e\r\nYes. Bench-test with the protective film in place to confirm correct operation before fitting.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SHARP,GUIDE\" data-zl-file=\"ZL-IF-FUNNYPLAYING-SCREEN\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e- Glass – sharp if broken; handle with care.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: FunnyPlaying · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"FunnyPlaying","offers":[{"title":"Default Title","offer_id":48516511957244,"sku":"000977","price":18.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/replacement-m2-laminated-ips-30-lcd-screen-for-nintendo-game-boy-advance-sp-gba-sp-black-screen-only-funnyplayingfunnyplaying-6984786.jpg?v=1763573015"}],"url":"https:\/\/www.zedlabz.com\/en-no\/collections\/ips-screens-display-mods-for-game-boy-advance-sp.oembed","provider":"ZedLabz","version":"1.0","type":"link"}