{"title":"Wii Remote \u0026 Controller Parts for Nintendo Wii","description":"\u003cp\u003eRepair Wii Remotes, Nunchucks, Classic Controllers and the Wii Balance Board with our replacement parts. Shop conductive rubber contact kits, battery covers and wrist strap sets, battery terminals and sync boards, vibration motors, 3D joystick modules, capacitors and tri-wing screw sets. A few small parts can bring a tired Wii Remote back to full working order.\u003c\/p\u003e","products":[{"product_id":"zedlabz-replacement-battery-cover-back-for-nintendo-wireless-wii-remote-white","title":"Replacement Battery Cover For Nintendo Wii Remote Controller - 2 Pack White | ZedLabz","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Replacement battery cover and wrist stap set for Nintendo Wii remote.\u003cbr\u003e- Includes two replacement battery cover for Official Wii remote wireless controllers\u003cbr\u003e- Direct replacement with accurate fit and securing catch.\u003cbr\u003e- Covers over the battery compartment to prevent batteries from falling out.\u003cbr\u003e- Closely matches the colour of the Nintendo Wii controller\u003cbr\u003e- Compatible with official Wii, Wii Mini \u0026amp; Wii U console remotes including Motion plus.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eIdeal to replace lost or broken battery covers, the ZedLabz compatible replacement battery cover for Wii fits perfectly into place with a reassuring click, ensuring your batteries will not fall out during gameplay.\u003cbr\u003e\u003cbr\u003eThis compatible replacment battery has been designed to accurately fit official Nintendo Wii remote controllers and is a direct replacement for the original part.\u003cbr\u003e\u003cbr\u003eThe battery cover fits over the battery compartment on the back of official Wii Remote or Wii Remote Plus (Wii MotionPlus INSIDE) wireless controllers that are included with Nintendo Wii, Wii Mini, \u0026amp; Wii U consoles.\u003cbr\u003e\u003cbr\u003eEach cover has been matched to the official Wii remote create the closet possible colour match that will compliment the controller and not look out of place.\u003cbr\u003e\u003cbr\u003eThis is a third party product which is not made by, sponsored or endorsed by Nintendo.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"\" data-zl-file=\"ZL-TF-SHELL-S00-NINHOME-001\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":28841669509,"sku":"400035","price":3.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/replacement-battery-cover-for-nintendo-wii-remote-controller-2-pack-white-zedlabzzedlabz-294268.jpg?v=1741600435"},{"product_id":"zedlabz-conductive-rubber-pad-button-contacts-kit-for-nintendo-wii-remote","title":"ZedLabz conductive rubber pad button contacts kit for Nintendo Wii remote","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Complete set of rubber conductive button pads button for Wii remote controller\u003cbr\u003e- 1 x Directional D-Pad \u0026amp; A button rubber contact pad\u003cbr\u003e- 1 x volume \u0026amp; home button rubber contact pad\u003cbr\u003e- 1 x one \u0026amp; two button rubber contact pad.\u003cbr\u003e- Requires internal fitting\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eRefurbish your Wii remote controllers sticky and non responsive buttons with the ZedLabz replacement rubber button contact pads set.\u003cbr\u003e\u003cbr\u003e Over time the original rubbers under the gaming controls wear and perish, this repair kit includes a brand new set of high quality replacement rubber button conductive pads to bring your controller buttons back to life. \u003cbr\u003e \u003cbr\u003eEach pack contains a directional \u0026amp; A, volume \/ home \u0026amp; one \/ two silicone rubber contact pads.\u003cbr\u003e \u003cbr\u003eRubber pads require technical internal fitting.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,GUIDE\" data-zl-file=\"ZL-TF-BUTTON-S01-MULTI-002\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":28847116933,"sku":"400158","price":3.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/w2hooipuzxm.jpg?v=1793963741"},{"product_id":"zedlabz-replacement-battery-cover-back-for-nintendo-wii-balance-board-grey","title":"Replacement Battery Cover For Nintendo Wii Fit Balance Board - Grey | ZedLabz","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Compatible battery door for Nintendo Wii balance board.\u003cbr\u003e- Accurate fit for the battery compartment.\u003cbr\u003e- Push release catch button like the original.\u003cbr\u003e- Matches the colour of the board.\u003cbr\u003e- Prevents batteries from falling out.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eSecure your AA batteries into your Wii Fit board with this compatible replacement battery door for the Nintendo balance board.\u003cbr\u003e\u003cbr\u003eAvoid interruptions from your batteries falling out of the balance board, this plastic cover will keep your batteries in position without the need for a makeshift solution.\u003cbr\u003e \u003cbr\u003eIt fits the compartment accurately and matches the colour of the controller.\u003cbr\u003e \u003cbr\u003eThe cover is fully compatible with official Nintendo Wii fit wireless balance board and fits over the battery compartment.\u003cbr\u003e\u003cbr\u003eBatteries not included, this is not a battery pack, this is a plastic cover to hold your batteries inside the balance board accessory.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"\" data-zl-file=\"ZL-TF-SHELL-S00-NINHOME-001\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":29219631941,"sku":"500350","price":5.28,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/replacement-battery-cover-for-nintendo-wii-fit-balance-board-grey-zedlabzzedlabz-237183.jpg?v=1741480799"},{"product_id":"zedlabz-replacement-vibration-motor-for-nintendo-wii-remote-wireless-controller","title":"ZedLabz replacement vibration motor for Nintendo Wii remote wireless controller","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Replacement internal vibration motor for Wii remote wireless controller.\u003cbr\u003e- Can repair problems with rumble vibration feedback not working.\u003cbr\u003e- Require internal fitting - Controller must be opened to replace the speaker.\u003cbr\u003e- Soldering required for positive and negative wires.\u003cbr\u003e- Tri-wing Y0 screwdriver is required to open controller (not included).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eIf your Wii remote is no longer vibrating when expected during gameplay you may need to replace the motor that powers the rumble vibration.\u003cbr\u003e\u003cbr\u003eIt is worth checking the software settings before concluding the motor needs to be replaced (see below for instructions).\u003cbr\u003e\u003cp\u003e\u003c\/p\u003eThe Wii vibration motor requires internal fitting and soldering.\u003cbr\u003e\u003cbr\u003eIt mounts under the B button, two wires need to be soldered to the controller motherboard, the wires are through hole mounted.\u003cbr\u003e\u003cbr\u003eOpening the controller will void your warranty.\u003cbr\u003e\u003cbr\u003eA tri-wing Y0 screwdriver is required to open the Wii remote (not included).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cu\u003eTesting your wii remote for software issues before repair:\u003c\/u\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1 - To check your Wii remote settings first ensure the batteries are good and have plenty of power left in them.\u003cbr\u003e2 - Navigate to the Wii Remote settings via the Home menu and verify that the rumble feature is turned \"on.\"\u003cbr\u003e3 - Go to the Wii Menu and point at the Wii button on the bottom left corner of the screen. \u003cbr\u003e4 - A slight vibration should be left, if the Wii Remote doesn't vibrate, there is likely a problem with the Wii Remote, and it will need to be opened in order to repair or replace the rumble vibration motor.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,HOT,VENT,GUIDE\" data-zl-file=\"ZL-TF-ELEC-MOTOR-S00-003\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Contains magnets – if swallowed, get medical help immediately.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":41982035781,"sku":"500475","price":3.72,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/zedlabz-replacement-vibration-motor-for-nintendo-wii-remote-wireless-controllerzedlabz-337742.jpg?v=1741480766"},{"product_id":"battery-cover-wrist-strap-kit-for-nintendo-wii-wii-u-remote-wireless-controller-4-in-1-pack-black-zedlabz","title":"Battery Cover \u0026 Wrist Strap Kit For Nintendo Wii Remote Controller - 4 In 1 Pack Black | ZedLabz","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Replacement wrist strap and battery cover set for Nintendo Wii remote.\u003cbr\u003e- Includes two compatible replacement battery covers for Official Wii remote.\u003cbr\u003e- Also includes two adjustable wrist straps for Wii wireless remotes.\u003cbr\u003e- Perfect for refreshing the commonly worn and lost parts of the controller.\u003cbr\u003e- Closely matches the colour of the original controller.\u003cbr\u003e- Compatible with Official Nintendo Wii remotes - not suitable for third party controllers.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eRefresh your Nintendo Wii remote game controller and replace the common parts which ware typically worn, damaged or lost. \u003cbr\u003e\u003cbr\u003eThis refurbishing kit includes two replacement battery covers and two replacement wrist straps compatible with official Wii remotes.\u003cbr\u003e\u003cbr\u003eEach part has been closely colour matched to the colours of the official Wii remotes to make it look original and like new again.\u003cbr\u003e\u003cbr\u003eThe battery cover fits over the battery compartment on the back of official Wii Remote or Wii Remote Plus (Wii MotionPlus INSIDE) wireless controllers that are included with Nintendo Wii, Wii Mini, \u0026amp; Wii U consoles.\u003cbr\u003e\u003cbr\u003eEach wrist strap is stitched together rather than glued for durability, providing piece of mind that the strap will not break with your controller attached.\u003cbr\u003e\u003cbr\u003eThis is a third party product which is not made by, sponsored or endorsed by Nintendo.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"\" data-zl-file=\"ZL-TF-SHELL-S00-NINHOME-001\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":12704984367206,"sku":"500940","price":4.22,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/ak1zdg1ikdi.jpg?v=1793960137"},{"product_id":"battery-cover-wrist-strap-kit-for-nintendo-wii-wii-u-remote-wireless-controller-4-in-1-pack-white-zedlabz","title":"Battery Cover \u0026 Wrist Strap Kit For Nintendo Wii Remote Controller - 4 In 1 Pack White | ZedLabz","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Replacement wrist strap and battery cover set for Nintendo Wii remote.\u003cbr\u003e- Includes two compatible replacement battery covers for Official Wii remote.\u003cbr\u003e- Also includes two adjustable wrist straps for Wii wireless remotes.\u003cbr\u003e- Closely matches the colour of the original controller.\u003cbr\u003e- Compatible with Official Nintendo Wii remotes - not suitable for third party controllers.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eRefresh your Nintendo Wii remote game controller and replace the common parts which ware typically worn, damaged or lost. \u003cbr\u003e\u003cbr\u003eThis refurbishing kit includes two replacement battery covers and two replacement wrist straps compatible with official Wii remotes.\u003cbr\u003e\u003cbr\u003eEach part has been closely colour matched to the colours of the official Wii remotes to make it look original and like new again.\u003cbr\u003e\u003cbr\u003eThe battery cover fits over the battery compartment on the back of official Wii Remote or Wii Remote Plus (Wii MotionPlus INSIDE) wireless controllers that are included with Nintendo Wii, Wii Mini, \u0026amp; Wii U consoles.\u003cbr\u003e\u003cbr\u003eEach wrist strap is stitched together rather than glued for durability, providing piece of mind that the strap will not break with your controller attached.\u003cbr\u003e\u003cbr\u003eThis is a third party product which is not made by, sponsored or endorsed by Nintendo.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"\" data-zl-file=\"ZL-TF-SHELL-S00-NINHOME-001\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":12730269663334,"sku":"500941","price":4.22,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/zqymzcs1lxr.jpg?v=1793960126"},{"product_id":"battery-cover-wrist-strap-kit-for-nintendo-wii-wii-u-remote-controller-4-in-1-pack-pink-zedlabz","title":"Battery Cover \u0026 Wrist Strap Kit For Nintendo Wii Remote Controller - 4 In 1 Pack Pink | ZedLabz","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Replacement wrist strap and battery cover set for Nintendo Wii remote.\u003cbr\u003e- Includes two compatible replacement battery covers for Official Wii remote.\u003cbr\u003e- Also includes two adjustable wrist straps for Wii wireless remotes.\u003cbr\u003e- Closely matches the colour of the original controller.\u003cbr\u003e- Compatible with Official Nintendo Wii remotes - not suitable for third party controllers.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eRefresh your Nintendo Wii remote game controller and replace the common parts which ware typically worn, damaged or lost. \u003cbr\u003e\u003cbr\u003eThis refurbishing kit includes two replacement battery covers and two replacement wrist straps compatible with official Wii remotes.\u003cbr\u003e\u003cbr\u003eEach part has been closely colour matched to the colours of the official Wii remotes to make it look original and like new again.\u003cbr\u003e\u003cbr\u003eThe battery cover fits over the battery compartment on the back of official Wii Remote or Wii Remote Plus (Wii MotionPlus INSIDE) wireless controllers that are included with Nintendo Wii, Wii Mini, \u0026amp; Wii U consoles.\u003cbr\u003e\u003cbr\u003eEach wrist strap is stitched together rather than glued for durability, providing piece of mind that the strap will not break with your controller attached.\u003cbr\u003e\u003cbr\u003eThis is a third party product which is not made by, sponsored or endorsed by Nintendo.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"\" data-zl-file=\"ZL-TF-SHELL-S00-NINHOME-001\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":13601034960998,"sku":"500942","price":4.22,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/dqcttrw1etw.jpg?v=1793960104"},{"product_id":"battery-cover-wrist-strap-kit-for-nintendo-wii-wii-u-remote-controller-4-in-1-pack-blue-zedlabz","title":"Battery Cover \u0026 Wrist Strap Kit For Nintendo Wii Remote Controller - 4 In 1 Pack Blue | ZedLabz","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Replacement wrist strap and battery cover set for Nintendo Wii remote.\u003cbr\u003e- Includes two compatible replacement battery covers for Official Wii remote.\u003cbr\u003e- Also includes two adjustable wrist straps for Wii wireless remotes.\u003cbr\u003e- Closely matches the colour of the original controller.\u003cbr\u003e- Compatible with Official Nintendo Wii remotes - not suitable for third party controllers.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eRefresh your Nintendo Wii remote game controller and replace the common parts which ware typically worn, damaged or lost. \u003cbr\u003e\u003cbr\u003eThis refurbishing kit includes two replacement battery covers and two replacement wrist straps compatible with official Wii remotes.\u003cbr\u003e\u003cbr\u003eEach part has been closely colour matched to the colours of the official Wii remotes to make it look original and like new again.\u003cbr\u003e\u003cbr\u003eThe battery cover fits over the battery compartment on the back of official Wii Remote or Wii Remote Plus (Wii MotionPlus INSIDE) wireless controllers that are included with Nintendo Wii, Wii Mini, \u0026amp; Wii U consoles.\u003cbr\u003e\u003cbr\u003eEach wrist strap is stitched together rather than glued for durability, providing piece of mind that the strap will not break with your controller attached.\u003cbr\u003e\u003cbr\u003eThis is a third party product which is not made by, sponsored or endorsed by Nintendo.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"\" data-zl-file=\"ZL-TF-SHELL-S00-NINHOME-001\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":13601067073638,"sku":"500943","price":4.22,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/rckayonduog.jpg?v=1793960092"},{"product_id":"battery-cover-wrist-strap-kit-for-nintendo-wii-wii-u-remote-controller-4-in-1-pack-red-zedlabz","title":"Battery Cover \u0026 Wrist Strap Kit For Nintendo Wii Remote Controller - 4 In 1 Pack Red | ZedLabz","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Replacement wrist strap and battery cover set for Nintendo Wii remote.\u003cbr\u003e- Includes two compatible replacement battery covers for Official Wii remote.\u003cbr\u003e- Also includes two adjustable wrist straps for Wii wireless remotes.\u003cbr\u003e- Closely matches the colour of the original controller.\u003cbr\u003e- Compatible with Official Nintendo Wii remotes - not suitable for third party controllers.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eRefresh your Nintendo Wii remote game controller and replace the common parts which ware typically worn, damaged or lost. \u003cbr\u003e\u003cbr\u003eThis refurbishing kit includes two replacement battery covers and two replacement wrist straps compatible with official Wii remotes.\u003cbr\u003e\u003cbr\u003eEach part has been closely colour matched to the colours of the official Wii remotes to make it look original and like new again.\u003cbr\u003e\u003cbr\u003eThe battery cover fits over the battery compartment on the back of official Wii Remote or Wii Remote Plus (Wii MotionPlus INSIDE) wireless controllers that are included with Nintendo Wii, Wii Mini, \u0026amp; Wii U consoles.\u003cbr\u003e\u003cbr\u003eEach wrist strap is stitched together rather than glued for durability, providing piece of mind that the strap will not break with your controller attached.\u003cbr\u003e\u003cbr\u003eThis is a third party product which is not made by, sponsored or endorsed by Nintendo.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"\" data-zl-file=\"ZL-TF-SHELL-S00-NINHOME-001\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":13601103675494,"sku":"500944","price":4.22,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/kcmhjzofjgu.jpg?v=1793960116"},{"product_id":"battery-cover-for-wii-wii-u-remote-nintendo-controller-cover-back-2-pack-red-zedlabz","title":"Replacement Battery Cover For Nintendo Wii Remote Controller - 2 Pack Red | ZedLabz","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Compatible replacement battery cover for Official Wii remote wireless controllers\u003cbr\u003e- Direct replacement with accurate fit and securing catch.\u003cbr\u003e- Covers over the battery compartment to prevent batteries from falling out.\u003cbr\u003e- Closely matches the colour of the Nintendo Wii controller\u003cbr\u003e- Compatible with official Wii, Wii Mini \u0026amp; Wii U console remotes including Motion plus.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eIdeal to replace lost or broken battery covers, the ZedLabz compatible replacement battery cover for Wii fits perfectly into place with a reassuring click, ensuring your batteries will not fall out during gameplay.\u003cbr\u003e\u003cbr\u003eThis compatible replacement battery has been designed to accurately fit official Nintendo Wii remote controllers and is a direct replacement for the original part.\u003cbr\u003e\u003cbr\u003eThe battery cover fits over the battery compartment on the back of official Wii Remote or Wii Remote Plus (Wii MotionPlus INSIDE) wireless controllers that are included with Nintendo Wii, Wii Mini, \u0026amp; Wii U consoles.\u003cbr\u003e\u003cbr\u003eEach cover has been matched to the official Wii remote create the closet possible colour match that will compliment the controller and not look out of place.\u003cbr\u003e\u003cbr\u003eThis is a third party product which is not made by, sponsored or endorsed by Nintendo.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"\" data-zl-file=\"ZL-TF-SHELL-S00-NINHOME-001\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":13615005040742,"sku":"400045","price":3.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/replacement-battery-cover-for-nintendo-wii-remote-controller-2-pack-red-zedlabzzedlabz-483584.jpg?v=1741480381"},{"product_id":"battery-cover-for-wii-wii-u-remote-nintendo-controller-cover-back-2-pack-blue-zedlabz","title":"Replacement Battery Cover For Nintendo Wii Remote Controller - 2 Pack Blue | ZedLabz","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Compatible replacement battery cover for Official Wii remote wireless controllers\u003cbr\u003e- Direct replacement with accurate fit and securing catch.\u003cbr\u003e- Covers over the battery compartment to prevent batteries from falling out.\u003cbr\u003e- Closely matches the colour of the Nintendo Wii controller\u003cbr\u003e- Compatible with official Wii, Wii Mini \u0026amp; Wii U console remotes including Motion plus.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eIdeal to replace lost or broken battery covers, the ZedLabz compatible replacement battery cover for Wii fits perfectly into place with a reassuring click, ensuring your batteries will not fall out during gameplay.\u003cbr\u003e\u003cbr\u003eThis compatible replacement battery has been designed to accurately fit official Nintendo Wii remote controllers and is a direct replacement for the original part.\u003cbr\u003e\u003cbr\u003eThe battery cover fits over the battery compartment on the back of official Wii Remote or Wii Remote Plus (Wii MotionPlus INSIDE) wireless controllers that are included with Nintendo Wii, Wii Mini, \u0026amp; Wii U consoles.\u003cbr\u003e\u003cbr\u003eEach cover has been matched to the official Wii remote create the closet possible colour match that will compliment the controller and not look out of place.\u003cbr\u003e\u003cbr\u003eThis is a third party product which is not made by, sponsored or endorsed by Nintendo.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"\" data-zl-file=\"ZL-TF-SHELL-S00-NINHOME-001\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":13615008383078,"sku":"400481","price":3.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/replacement-battery-cover-for-nintendo-wii-remote-controller-2-pack-blue-zedlabzzedlabz-708439.jpg?v=1741480381"},{"product_id":"battery-cover-for-wii-wii-u-remote-nintendo-controller-cover-back-2-pack-pink-zedlabz","title":"Replacement Battery Cover For Nintendo Wii Remote Controller - 2 Pack Pink | ZedLabz","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Compatible replacement battery cover for Official Wii remote wireless controllers\u003cbr\u003e- Direct replacement with accurate fit and securing catch.\u003cbr\u003e- Covers over the battery compartment to prevent batteries from falling out.\u003cbr\u003e- Closely matches the colour of the Nintendo Wii controller\u003cbr\u003e- Compatible with official Wii, Wii Mini \u0026amp; Wii U console remotes including Motion plus.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eIdeal to replace lost or broken battery covers, the ZedLabz compatible replacement battery cover for Wii fits perfectly into place with a reassuring click, ensuring your batteries will not fall out during gameplay.\u003cbr\u003e\u003cbr\u003eThis compatible replacement battery has been designed to accurately fit official Nintendo Wii remote controllers and is a direct replacement for the original part.\u003cbr\u003e\u003cbr\u003eThe battery cover fits over the battery compartment on the back of official Wii Remote or Wii Remote Plus (Wii MotionPlus INSIDE) wireless controllers that are included with Nintendo Wii, Wii Mini, \u0026amp; Wii U consoles.\u003cbr\u003e\u003cbr\u003eEach cover has been matched to the official Wii remote create the closet possible colour match that will compliment the controller and not look out of place.\u003cbr\u003e\u003cbr\u003eThis is a third party product which is not made by, sponsored or endorsed by Nintendo.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"\" data-zl-file=\"ZL-TF-SHELL-S00-NINHOME-001\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":13615008481382,"sku":"400480","price":3.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/replacement-battery-cover-for-nintendo-wii-remote-controller-2-pack-pink-zedlabzzedlabz-794518.jpg?v=1741480381"},{"product_id":"replacement-battery-cover-for-nintendo-wii-remote-controller-back-2-pack-black","title":"Replacement Battery Cover For Nintendo Wii Remote Controller - 2 Pack Black | ZedLabz","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Replacement battery cover and wrist stap set for Nintendo Wii remote.\u003cbr\u003e- Includes two replacement battery cover for Official Wii remote wireless controllers\u003cbr\u003e- Direct replacement with accurate fit and securing catch.\u003cbr\u003e- Covers over the battery compartment to prevent batteries from falling out.\u003cbr\u003e- Closely matches the colour of the Nintendo Wii controller\u003cbr\u003e- Compatible with official Wii, Wii Mini \u0026amp; Wii U console remotes including Motion plus.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eIdeal to replace lost or broken battery covers, the ZedLabz compatible replacement battery cover for Wii fits perfectly into place with a reassuring click, ensuring your batteries will not fall out during gameplay.\u003cbr\u003e\u003cbr\u003eThis compatible replacment battery has been designed to accurately fit official Nintendo Wii remote controllers and is a direct replacement for the original part.\u003cbr\u003e\u003cbr\u003eThe battery cover fits over the battery compartment on the back of official Wii Remote or Wii Remote Plus (Wii MotionPlus INSIDE) wireless controllers that are included with Nintendo Wii, Wii Mini, \u0026amp; Wii U consoles.\u003cbr\u003e\u003cbr\u003eEach cover has been matched to the official Wii remote create the closet possible colour match that will compliment the controller and not look out of place.\u003cbr\u003e\u003cbr\u003eThis is a third party product which is not made by, sponsored or endorsed by Nintendo.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"\" data-zl-file=\"ZL-TF-SHELL-S00-NINHOME-001\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":16201023291494,"sku":"400036","price":3.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/replacement-battery-cover-for-nintendo-wii-remote-controller-2-pack-black-zedlabzzedlabz-755651.jpg?v=1741480202"},{"product_id":"replacement-battery-terminal-for-nintendo-wii-remote-spring-metal-contact-set-zedlabz","title":"Replacement battery terminal for Nintendo Wii remote (motherboard side) spring metal contact set | ZedLabz","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Replacement metal battery spring terminal contacts for Wii.\u003cbr\u003e- Compatible with Nintendo Wii wireless remote controllers.\u003cbr\u003e- Ideal for replacing damaged or corroded springs.\u003cbr\u003e- Pack of two contacts, enough for one controller\u003cbr\u003e- Require internal fitting and soldering.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eRepair a corroded or damaged battery contact in a Wii remote with this pack of replacement battery terminals.\u003cbr\u003e\u003cbr\u003eThese install on the motherboard and require soldering to install, the old ones must first be desoldered and removed, so in addition to a soldering iron and solder, you will require desoldering braid or a desoldering pump \/ gun, flux will also assist.\u003cbr\u003e\u003cbr\u003eLeaked batteries can caused damage to the original contacts causing the original contacts to fail beyond repair, replacements can be fitted by removing the old ones and soldering new ones into place.  \u003cbr\u003e\u003cbr\u003eThey are also ideal for replacing rusty contacts or contacts that have been accidentally damaged.\u003cbr\u003e\u003cbr\u003eRequire internal fitting and soldering to install, the controller must be opened, a tri-wing screwdriver is required to open the Wii remote (not included).\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,HOT,VENT,GUIDE\" data-zl-file=\"ZL-TF-PORT-S00-MULTI-001\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":29473755594854,"sku":"500488","price":3.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/4emhsub0ukt.jpg?v=1793969742"},{"product_id":"replacement-compatible-tri-wing-y-screw-set-for-nintendo-wii-pro-controller-10-pack-silver-zedlabz","title":"Replacement Compatible tri wing Y screw set for Nintendo Wii Pro controller  - 10 pack silver | ZedLabz","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- For use with Wii Pro controllers.\u003cbr\u003e- Tri wing Y security screw head set.\u003cbr\u003e- Silver finish.\u003cbr\u003e- Includes 10 screws\u003cbr\u003e- Require Tri wing Y screwdriver to install.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eA complete set of 10 screws for a Nintendo Wii Pro controllers.\u003cbr\u003e\u003cbr\u003eThese are compatible replacements, silver in colour, ideal for replacing lost screws.\u003cbr\u003e\u003cbr\u003eRequire Tri wing Y screwdriver to install.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR\" data-zl-file=\"ZL-TF-MECH-S99-014\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":29477539283046,"sku":"600235","price":3.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/replacement-compatible-tri-wing-y-screw-set-for-nintendo-wii-pro-controller-10-pack-silver-zedlabzzedlabz-362211.jpg?v=1741479838"},{"product_id":"3d-joystick-for-nintendo-wii-controller-with-pcb-board-internal-replacement-set-2-pack-zedlabz","title":"3D joystick for Nintendo Wii controller with PCB board internal replacement set - 2 pack | ZedLabz","description":"\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- 3D joystick for Wii Controller. \u003cbr\u003e- With PCB board. \u003cbr\u003e- 2 pack. \u003cbr\u003e- Compatible with Nintendo Wii. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eReplacement 3D joystick with PCB board for Nintendo Wii Controller. \u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,GUIDE\" data-zl-file=\"ZL-TF-STICK-S00-005\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":31169464729702,"sku":"600792","price":7.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/3d-joystick-for-nintendo-wii-controller-with-pcb-board-internal-replacement-set-2-pack-zedlabzzedlabz-159172.jpg?v=1741478871"},{"product_id":"battery-cover-wrist-strap-kit-for-nintendo-wii-remote-controller-4-in-1-pack-zedlabz","title":"Battery Cover \u0026 Wrist Strap Kit For Nintendo Wii Remote Controller - 4 In 1 Pack | ZedLabz","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Replacement wrist strap and battery cover set for Nintendo Wii remote.\u003cbr\u003e- Includes two compatible replacement battery covers for Official Wii remote.\u003cbr\u003e- Also includes two adjustable wrist straps for Wii wireless remotes.\u003cbr\u003e- Closely matches the colour of the original controller.\u003cbr\u003e- Compatible with Official Nintendo Wii remotes - not suitable for third party controllers.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eRefresh your Nintendo Wii remote game controller and replace the common parts which ware typically worn, damaged or lost. \u003cbr\u003e\u003cbr\u003eThis refurbishing kit includes two replacement battery covers and two replacement wrist straps compatible with official Wii remotes.\u003cbr\u003e\u003cbr\u003eEach part has been closely colour matched to the colours of the official Wii remotes to make it look original and like new again.\u003cbr\u003e\u003cbr\u003eThe battery cover fits over the battery compartment on the back of official Wii Remote or Wii Remote Plus (Wii MotionPlus INSIDE) wireless controllers that are included with Nintendo Wii, Wii Mini, \u0026amp; Wii U consoles.\u003cbr\u003e\u003cbr\u003eEach wrist strap is stitched together rather than glued for durability, providing piece of mind that the strap will not break with your controller attached.\u003cbr\u003e\u003cbr\u003eThis is a third party product which is not made by, sponsored or endorsed by Nintendo.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"\" data-zl-file=\"ZL-TF-SHELL-S00-NINHOME-001\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Black","offer_id":32076194349158,"sku":"500940","price":4.22,"currency_code":"GBP","in_stock":true},{"title":"White","offer_id":32076194381926,"sku":"500941","price":4.22,"currency_code":"GBP","in_stock":true},{"title":"Pink","offer_id":32076194414694,"sku":"500942","price":4.22,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":32076194447462,"sku":"500943","price":4.22,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":32076194480230,"sku":"500944","price":4.22,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/battery-cover-wrist-strap-kit-for-nintendo-wii-remote-controller-4-in-1-pack-zedlabzzedlabz-5881336.jpg?v=1794006850"},{"product_id":"contact-kits-for-nintendo-wii-remotes-conductive-rubber-pad-button-replacement-zedlabz","title":"Contact kits for Nintendo Wii remotes conductive rubber pad button replacement | ZedLabz","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Complete set of rubber conductive button pads for Wii remote, Wii U Gamepad \u0026amp; Wii Classic Pro controller.\u003cbr\u003e- Nintendo Wii remote: 1 x Directional D-Pad, A 1 x volume \u0026amp; home 1 x one \u0026amp; two button rubber contact pad.\u003cbr\u003e- Nintendo Wii U Gamepad: - 1 x A, B, X \u0026amp; Y, 1 x Directional D-Pad, 4 x trigger \/ shoulder, 1 x home, 1 x volume \u0026amp; 1 x control\/power button rubber contact.\u003cbr\u003e- Nintendo Wii classic pro controller: - 1 x A, B, X, Y, 1 x Directional D-Pad, 1 x home volume button rubber contact.\u003cbr\u003e- Require internal fitting\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eRefurbish your Wii Gamepad, controller \u0026amp; remotes sticky and non responsive buttons with the ZedLabz replacement rubber button contact pad sets\u003cbr\u003e\u003cbr\u003e Over time the original rubbers under the gaming controls wear and perish, this repair kit includes a brand new set of high quality replacement rubber button conductive pads to bring your controller buttons back to life. \u003cbr\u003e \u003cbr\u003e- Nintendo Wii remote: 1 x Directional D-Pad, A 1 x volume \u0026amp; home 1 x one \u0026amp; two button rubber contact pad.\u003cbr\u003e- Nintendo Wii U Gamepad: - 1 x A, B, X \u0026amp; Y, 1 x Directional D-Pad, 4 x trigger \/ shoulder, 1 x home, 1 x volume \u0026amp; 1 x control\/power button rubber contact.\u003cbr\u003e- Nintendo Wii classic pro controller: - 1 x A, B, X, Y, 1 x Directional D-Pad, 1 x home volume button rubber contact.\u003cbr\u003e\u003cbr\u003eContact sets are not compatible with other Wii controllers, please check compatibility before purchasing. \u003cbr\u003e\u003cbr\u003eRubber pads require technical internal fitting.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,GUIDE\" data-zl-file=\"ZL-TF-BUTTON-S01-MULTI-002\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Wii Remote","offer_id":32087683891302,"sku":"400158","price":2.83,"currency_code":"GBP","in_stock":true},{"title":"Wii U gamepad","offer_id":32087683924070,"sku":"500356","price":5.56,"currency_code":"GBP","in_stock":false},{"title":"Wii Classic Pro controller","offer_id":32087683956838,"sku":"500472","price":2.88,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/contact-kits-for-nintendo-wii-remotes-conductive-rubber-pad-button-replacement-zedlabzzedlabz-5710094.jpg?v=1794006669"},{"product_id":"battery-cover-for-nintendo-wii-remote-replacement-zedlabz","title":"Replacement Battery Cover For Nintendo Wii Remote Controller - 2 Pack | ZedLabz","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Compatible replacement battery cover for Official Wii remote wireless controllers\u003cbr\u003e- Direct replacement with accurate fit and securing catch.\u003cbr\u003e- Covers over the battery compartment to prevent batteries from falling out.\u003cbr\u003e- Closely matches the colour of the Nintendo Wii controller\u003cbr\u003e- Compatible with official Wii, Wii Mini \u0026amp; Wii U console remotes including Motion plus.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eIdeal to replace lost or broken battery covers, the ZedLabz compatible replacement battery cover for Wii fits perfectly into place with a reassuring click, ensuring your batteries will not fall out during gameplay.\u003cbr\u003e\u003cbr\u003eThis compatible replacement battery has been designed to accurately fit official Nintendo Wii remote controllers and is a direct replacement for the original part.\u003cbr\u003e\u003cbr\u003eThe battery cover fits over the battery compartment on the back of official Wii Remote or Wii Remote Plus (Wii MotionPlus INSIDE) wireless controllers that are included with Nintendo Wii, Wii Mini, \u0026amp; Wii U consoles.\u003cbr\u003e\u003cbr\u003eEach cover has been matched to the official Wii remote create the closet possible colour match that will compliment the controller and not look out of place.\u003cbr\u003e\u003cbr\u003eThis is a third party product which is not made by, sponsored or endorsed by Nintendo.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"\" data-zl-file=\"ZL-TF-SHELL-S00-NINHOME-001\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"White","offer_id":32090567409766,"sku":"400035","price":3.13,"currency_code":"GBP","in_stock":true},{"title":"Black","offer_id":32090567442534,"sku":"400036","price":3.13,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":32090567475302,"sku":"400045","price":3.13,"currency_code":"GBP","in_stock":true},{"title":"Pink","offer_id":32090567508070,"sku":"400480","price":3.13,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":32090567540838,"sku":"400481","price":3.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/replacement-battery-cover-for-nintendo-wii-remote-controller-2-pack-zedlabzzedlabz-900143.jpg?v=1741476637"},{"product_id":"3300uf-capacitor-for-nintendo-wii-remote-controller-c55-2-pack-zedlabz","title":"3300uf Capacitor for Nintendo Wii Remote controller C55 - 2 pack | ZedLabz","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e \r\n\u003cbr\u003e\u003cbr\u003e- Large 3300uf cap for Nintendo Wii remotes\u003cbr\u003e\r\n- Includes 2 capacitors - enough to restore two controllers\u003cbr\u003e- Rubycon branded (subject to change  to another major brand)\u003cbr\u003e- Note that we supply a 10V capacitor to replace the 4V original.\u003cbr\u003e- Requires internal soldering. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e \r\n\u003cbr\u003eReplacing old, leaking or buldging capacitors in your controllers can keep them functioning for years to come. This 3300uf capacitor for the Wii remote is located on position C55 on the controllers mainboard which is at the bottom of the board near the nunchuck connection port.\u003cbr\u003e\u003cbr\u003eTwo capacitors are supplied, enough to refurbish two Wii remotes, one capacitor is needed per controller.\u003cbr\u003e\u003cbr\u003eAll of our aluminum capacitors are sourced from major distributors and only good quality major brands are offered, brands we use include Panasonic, Nichicon, Eaton, Wurth and Rubycon, the brand supplied may vary but will always be a major brand equivalent to the ones illustrated.\u003cbr\u003e\u003cbr\u003eNote that we supply a 10V capacitor to replace the original 4V one, this is fully compatible, the voltage can be higher, but not lower, the uf rating has to match and we provide a 3300uf capacitor like the original.\u003cbr\u003e\u003cbr\u003eA reasonable level of soldering ability are required to install the replacement capacitors. The console must be opened to install, take note of the polarity, the capacitor needs to be fitted with the positive leg going to the positive through hole which is marked on the circuit board with a plus symbol. \u003cbr\u003e\u003cbr\u003eA Philips #00 and Tri-wing security screwdriver are required to open the console (Not included).\u003cbr\u003e\u003cbr\u003eSoldering iron, solder \u0026amp; desoldering braid required to fit capacitors, (not included). \u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,HOT,VENT,GUIDE\" data-zl-file=\"ZL-TF-ELEC-IC-S08-001\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fit capacitors the right way round – reversed parts can burst.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":44793816547580,"sku":"300987","price":3.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/1o2nkkcww02.jpg?v=1794002581"},{"product_id":"47uf-tantalum-capacitor-for-nintendo-wii-remote-controller-c49-2-pack-zedlabz","title":"47uf Tantalum Capacitor for Nintendo Wii Remote controller C49 - 2 pack | ZedLabz","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e \r\n\u003cbr\u003e\u003cbr\u003e- 47uf tantalum cap for Nintendo Wii remotes\u003cbr\u003e\r\n- Includes 2 capacitors - enough to restore two controllers\u003cbr\u003e- Replaces the capactor at location C40\u003cbr\u003e- Positive polarity marked on cap with a stripe on the top.\u003cbr\u003e- Requires internal soldering. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e \r\n\u003cbr\u003eReplacing a failed, damaged or missing capacitor may restore power to your controller. This is a 47uf tantalum capacitor for the Wii remote, it is found in location C49 on the controllers mainboard, close to the battery terminal.\u003cbr\u003e\u003cbr\u003eTwo capacitors are supplied, enough to refurbish two Wii remotes, one capacitor is needed per controller.\u003cbr\u003e\u003cbr\u003eCapacitor specification is a 476J 47uf 6.3V tantalum.\u003cbr\u003e\u003cbr\u003eA reasonable level of soldering ability are required to install the replacement capacitors. The console must be opened to install, take note of the polarity, the capacitor needs to be fitted with the stripe going to the positive symbol which is marked on the circuit board on the left of the capacitor. \u003cbr\u003e\u003cbr\u003eA Philips #00 and Tri-wing security screwdriver are required to open the console (Not included).\u003cbr\u003e\u003cbr\u003eSoldering iron, solder \u0026amp; desoldering braid required to fit capacitors, (not included). \u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,HOT,VENT,GUIDE\" data-zl-file=\"ZL-TF-ELEC-IC-S08-001\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fit capacitors the right way round – reversed parts can burst.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":44827890319612,"sku":"300996","price":4.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/ugviub2ez0s.jpg?v=1794002869"},{"product_id":"replacement-analog-thumbsticks-for-nintendo-wii-classic-controller-nunchuck-2-pack-white-zedlabz","title":"Thumbsticks for Nintendo Wii classic controller \u0026 nunchuck analog rubber grip sticks - 2 pack White | ZedLabz","description":"\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Direct replacement for the original Wii classic analog sticks - includes left and right sticks in the pack\u003cbr\u003e- Easy “lift off \/ push on” installation (once controller opened) - no soldering required\u003cbr\u003e- Cost-effective repair solution - restore the gamepad controls back to like new condition.\u003cbr\u003e- Compatible also with Nunchuck controllers\u003cbr\u003e- Console must be opened to install, tools required (not included)\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eRestore your Wii Controller to like new performance with our replacement analog thumbsticks. \u003cbr\u003e\u003cbr\u003eOver time the rubber on the top of the plastic control sticks wears or becomes damaged, these replacement parts restore the sticks by replacing them with a fresh rubber top.\u003cbr\u003e\u003cbr\u003eReplacing the thumb sticks requires you to open the controller which may void any warranty, technical level medium. \u003cbr\u003e\u003cbr\u003eA Phillips #00 screwdriver is needed for removing the battery cover. \u003cbr\u003e\u003cbr\u003eA tri-wing\/Y-type screwdriver is needed for removing Nintendo security screws.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eMore info: \u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eBest practices: \u003cbr\u003e\u003cbr\u003eWork on a clean, well-lit surface.\r\n\u003cbr\u003e\u003cbr\u003eTake photos as you go for referenece, laying screws in sequence so re-assembly is correct.\u003cbr\u003e\u003cbr\u003eHandle ribbon cables carefully, the connectors can sometimes be hard to remove and easy to break.\u003cbr\u003e\u003cbr\u003eRefer to youtube video guides on how to dissaemble if you get stuck.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFAQ (Frequently Asked Questions)\r\n\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eQ: Will this fit both left and right sticks of the controller?\r\n\u003cbr\u003eA: Yes, both the left and the right side are the same part, you will get two in a pack.\u003cbr\u003e\u003cbr\u003eQ: Does this require soldering or advanced skills?\r\n\u003cbr\u003eA: No soldering required. It’s a plug-and-push component once you have sufficient access via standard screw removal. Some disassembly of the controller housing is required which is of an easy difficulty level.\u003cbr\u003e\u003cbr\u003eQ: Will this fix a controller that has very worn thumb caps? \u003cbr\u003eA: Yes, the new rubberised thumbstick surfaces restore grip and control feel, so the user doesn’t have to grip harder or adjust their play style.\r\n\u003cbr\u003e\u003cbr\u003eQ: Does opening the controller carry risks?\r\n\u003cbr\u003eA: Yes, opening the housing will void any warranty, and carries risk of damage during dissasembly or assembly such as catching a ribbon cable.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,GUIDE\" data-zl-file=\"ZL-TF-STICK-S00-MULTI-001\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":48556660621564,"sku":"300033","price":3.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/thumbsticks-for-nintendo-wii-classic-controller-nunchuck-analog-rubber-grip-sticks-2-pack-white-zedlabzzedlabz-3512122.jpg?v=1764196505"},{"product_id":"replacement-analog-thumbsticks-for-nintendo-wii-classic-controller-nunchuck-2-pack-black-zedlabz","title":"Thumbsticks for Nintendo Wii classic controller \u0026 nunchuck analog rubber grip sticks - 2 pack Black | ZedLabz","description":"\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Direct replacement for the original Wii classic analog sticks - includes left and right sticks in the pack\u003cbr\u003e- Easy “lift off \/ push on” installation (once controller opened) - no soldering required\u003cbr\u003e- Cost-effective repair solution - restore the gamepad controls back to like new condition.\u003cbr\u003e- Compatible also with Nunchuck controllers\u003cbr\u003e- Console must be opened to install, tools required (not included)\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eRestore your Wii Controller to like new performance with our replacement analog thumbsticks. \u003cbr\u003e\u003cbr\u003eOver time the rubber on the top of the plastic control sticks wears or becomes damaged, these replacement parts restore the sticks by replacing them with a fresh rubber top.\u003cbr\u003e\u003cbr\u003eReplacing the thumb sticks requires you to open the controller which may void any warranty, technical level medium. \u003cbr\u003e\u003cbr\u003eA Phillips #00 screwdriver is needed for removing the battery cover. \u003cbr\u003e\u003cbr\u003eA tri-wing\/Y-type screwdriver is needed for removing Nintendo security screws.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eMore info: \u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eBest practices: \u003cbr\u003e\u003cbr\u003eWork on a clean, well-lit surface.\r\n\u003cbr\u003e\u003cbr\u003eTake photos as you go for referenece, laying screws in sequence so re-assembly is correct.\u003cbr\u003e\u003cbr\u003eHandle ribbon cables carefully, the connectors can sometimes be hard to remove and easy to break.\u003cbr\u003e\u003cbr\u003eRefer to youtube video guides on how to dissaemble if you get stuck.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFAQ (Frequently Asked Questions)\r\n\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eQ: Will this fit both left and right sticks of the controller?\r\n\u003cbr\u003eA: Yes, both the left and the right side are the same part, you will get two in a pack.\u003cbr\u003e\u003cbr\u003eQ: Does this require soldering or advanced skills?\r\n\u003cbr\u003eA: No soldering required. It’s a plug-and-push component once you have sufficient access via standard screw removal. Some disassembly of the controller housing is required which is of an easy difficulty level.\u003cbr\u003e\u003cbr\u003eQ: Will this fix a controller that has very worn thumb caps? \u003cbr\u003eA: Yes, the new rubberised thumbstick surfaces restore grip and control feel, so the user doesn’t have to grip harder or adjust their play style.\r\n\u003cbr\u003e\u003cbr\u003eQ: Does opening the controller carry risks?\r\n\u003cbr\u003eA: Yes, opening the housing will void any warranty, and carries risk of damage during dissasembly or assembly such as catching a ribbon cable.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,GUIDE\" data-zl-file=\"ZL-TF-STICK-S00-MULTI-001\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eManufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":48556769116412,"sku":"300034","price":3.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/thumbsticks-for-nintendo-wii-classic-controller-nunchuck-analog-rubber-grip-sticks-2-pack-black-zedlabzzedlabz-2108786.jpg?v=1764196506"},{"product_id":"replacement-battery-contact-sync-pcb-board-kit-for-nintendo-wii-balance-board-retroverse","title":"Replacement battery contact \u0026 sync PCB board rebuild kit for Nintendo Wii balance board | Retroverse","description":"\u003cb\u003eFeatures: \u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Replacement battery contact \u0026amp; sync board for Wii Balance board\u003cbr\u003e- Supplied in kit form, soldering required\u003cbr\u003e- Ideal for replacing battery corroded terminals\u003cbr\u003e- fits into the grey battery holder from the inside of the balance board\u003cbr\u003e- Requires internal fititng and reasonable soldering skills\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription: \u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eA third party compatible replacement battery terminal and sync pcb board rebuild kit for the Nintendo Wii balanace board, it is used to restore the battery compartment and allow the balance board to power up again with fresh batteries.\u003cbr\u003e\u003cbr\u003eLeaked batteries can eat through the metal on battery terminals and even damage the solder joints on the PCB board, in some cases the blue and green corrosion can be cleaned off with a wire brush or other abrasive tools, but the amount of leaking and time left can result in more perminent damage, remember to remove batteries when not in use for a period of time.\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePlease note: This is supplied in kit form with soldering needed to fit the componenets to the board and also into the Wii balance board, technical level medium\u003c\/b\u003e, the balance board needs to be dissassembled to install, please seek a professional installer if you are unsure about fitting.\u003cbr\u003e\u003cbr\u003eThis kit is ideal to repair battery corrosion issues where leaked batteries have damaged the battery terminals and or the PCB inside.\u003cbr\u003e\u003cbr\u003eThe PCB is provided blank with the PCB components supplied loose, you will need to first solder the components to the PCB before attempting to fit it in place, you will then need to desolder the connecting cable from the original board and solder it onto a new one.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,HOT,VENT,GUIDE\" data-zl-file=\"ZL-IF-RETROVERSE-OTHER\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Retroverse · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"Retroverse","offers":[{"title":"Default Title","offer_id":51245470449916,"sku":"300145","price":9.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/replacement-battery-contact-sync-pcb-board-rebuild-kit-for-nintendo-wii-balance-board-retroverseretroverse-8676670.jpg?v=1788942870"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/collections\/zl-wii-remote-controller-parts-for-nintendo-wii-1115.png?v=1794771979","url":"https:\/\/www.zedlabz.com\/en-no\/collections\/wii-remote-controller-parts-for-nintendo-wii.oembed","provider":"ZedLabz","version":"1.0","type":"link"}