{"product_id":"laminated-3-0-inch-ita-backlight-lcd-screen-kit-for-nintendo-game-boy-advance-sp","title":"Laminated 3.0 inch ITA backlight LCD screen kit for Nintendo Game Boy Advance SP","description":"\u003cstrong\u003eFeatures:\r\n\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\r\n- 3.00 laminated ITA LCD kit with optional OSD for Game Boy Advance SP.\u003cbr\u003e\r\n- Laminated screen - Plug and play install with some soldering required.\u003cbr\u003e\r\n- Additonal wire to Q12B on the motherboard allows brightness control.\u003cbr\u003e\r\n- 3.00\" screen size with traditional Advance SP logo.\u003cbr\u003e\r\n- Can be installed into an IPS ready Funnyplaying SP housing shell.\u003cbr\u003e\u003cbr\u003e\r\n\u003cstrong\u003eDescription:\r\n\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eGive your SP a modern upgrade with a traditional look, the ITA version of the laminated SP screen kit from funnyplaying provides the traditional look of the AGS-101 display with better colours and a brighter backlight.\u003cbr\u003e\u003cbr\u003eThe screen can only be installed with soldering, a single wire is also soldered between the driver ribbon and Q12B on the motherboard.\u003cbr\u003e\u003cbr\u003eYou will need an IPS ready shell, we recommend using the ones from Funnyplaying which is IPS ready and compatible with this screen. Alternatively you can trim some plastic from the inside of the top lid on a non IPS shell to install this screen but we do recommend getting the shell made for this screen.\u003cbr\u003e\u003cbr\u003eThe pack includes the LCD panel (with laminated screen lens), the driver ribbon cable, and adhesive foam pad \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE: Please bench test the kit before fully installing to ensure that there are no issues with the product, if you do find issues please contact our support team before proceeding further.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eOnce installed you can enjoy fantastic picture clarity with no screen tearing.\u003cbr\u003e\u003cbr\u003eOther items needed which are not included: Basic screwdriver tools to fit the screen, soldering iron and solder, non of these items are included.\u003cbr\u003e\u003cbr\u003eYou will need to have some patience and take care when installing this kit, it can be installed by beginners however there are quirks and challenges when working on a Game Boy, youtube offers a range of useful take apart videos that we recommend watching if your unsure about how to take the console apart.\u003cbr\u003e\u003cbr\u003eFunnyplaying official installation guide is found here: https:\/\/funnyplaying.com\/blogs\/gameboy-advance-news\/tutorial-for-gbasp-laminate-itasp-kit\u003cbr\u003e\u003cbr\u003ePlease note that the LCD screen and ribbon cable require care to install and are fragile in nature, ribbon cables can be ripped during install without proper care, the LCD are also more susceptible to damage once installed if the console is dropped, LCD screens can crack under pressure or with a impact, our warranty does not cover accidental \/ user damage of any components in this kit. Replacement parts will be available to purchase separately in the near future.\u003cbr\u003e\u003cbr\u003e\u003cdiv id=\"zl-diy\"\u003e\n\u003cstrong\u003eDIY part.\u003c\/strong\u003e This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our \u003ca href=\"https:\/\/zedlabz.com\/blogs\/guides\"\u003efitting guides\u003c\/a\u003e. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-safety\" class=\"zl-safety\" data-zl-ver=\"1.0\" data-zl-sym=\"SP,KOR,HOT,VENT,SHARP,GUIDE\" data-zl-file=\"ZL-IF-FUNNYPLAYING-CE-LCDKIT\"\u003e\n\u003cb\u003eSafety information:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Not a toy. Keep out of reach of children.\u003cbr\u003e- Small parts – choking hazard.\u003cbr\u003e- Soldering required – ventilate, beware hot iron.\u003cbr\u003e- Glass – sharp if broken; handle with care.\u003cbr\u003e- Switch off, unplug and remove any batteries before fitting.\u003cbr\u003e- Fits listed models only – do not force.\u003cbr\u003e- Fitting guides: zedlabz.com\/blogs\/guides\u003cbr\u003e- Follow the manufacturer's instructions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-mfr\"\u003eBrand \/ manufacturer: Funnyplaying · Importer \/ seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv id=\"zl-eurp\"\u003eEU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com\u003c\/div\u003e","brand":"FunnyPlaying","offers":[{"title":"Default Title","offer_id":44446282154236,"sku":"300257","price":746.0,"currency_code":"NOK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/2xajte1j1at.jpg?v=1794001887","url":"https:\/\/www.zedlabz.com\/en-no\/products\/laminated-3-0-inch-ita-backlight-lcd-screen-kit-for-nintendo-game-boy-advance-sp","provider":"ZedLabz","version":"1.0","type":"link"}