{"title":"Hall effect analog sticks","description":"\u003cp\u003e\u003cstrong\u003eHall Effect analog sticks, the drift-resistant upgrade catalog across modern and retro controllers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003csection class=\"browse-by\"\u003e\n\u003cbr\u003e\u003ch2\u003eBrowse Hall Effect sticks by controller\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eSwitch Joy-Con\u003c\/strong\u003e. Ginfull TMR, ZedLabz Hall Effect, Repair Box Hall Effect\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eN64 controllers\u003c\/strong\u003e. Retro-Bit, Hyperkin, XYAB Hall Effect joystick replacements\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePS5 DualSense\u003c\/strong\u003e. Hall Effect and TMR modules. Install requires fine-pitch soldering on the controller PCB.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePS4 DualShock 4\u003c\/strong\u003e. Hall Effect modules. Install requires fine-pitch soldering on the controller PCB.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eXbox Series\u003c\/strong\u003e. TMR modules requiring fine-pitch soldering on the controller PCB. Plus the 8BitDo Ultimate Wired controller as a no-mod alternative.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\n\n\u003cbr\u003e\n\u003cp\u003eStick drift is one of the most-cited faults on modern controllers and aging N64 pads. Hall Effect and TMR (Tunneling Magnetoresistance) sticks use magnetic sensors instead of contact-based potentiometers, avoiding the contact-wear mechanism that causes drift on the original modules. ZedLabz stocks Ginfull's colored TMR Joy-Con sticks (white, black, blue, red) plus drop-in Hall Effect Joy-Con stick 2-packs, Repair Box Hall Effect, drop-in Hall Effect and TMR modules for PS4, PS5 and Xbox Series, and Hall Sense N64 modules from Retro-Bit, Hyperkin and XYAB.\u003c\/p\u003e\n\n\u003cbr\u003e\u003ch2\u003eQuick picks for fixing drift\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eSwitch Joy-Con drift:\u003c\/strong\u003e Ginfull TMR or ZedLabz Hall Effect Joy-Con sticks, drop-in design that matches Joy-Con dimensions. No soldering for the swap itself, but you need a tri-point Y0 screwdriver to open the Joy-Con. The most-requested drift fix given the size of the Switch userbase.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eN64 controllers:\u003c\/strong\u003e the Retro-Bit, Hyperkin or XYAB N64 Hall Effect joystick drops into an original N64 controller without soldering, just a screwdriver. One of the more straightforward controller upgrades for non-technical gamers, typically a quick swap once you've got the controller open.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePS5 \/ Xbox Series drift:\u003c\/strong\u003e drop-in Hall Effect (PS5, PS4) or TMR (PS5, Xbox Series) modules. Surface-mounted, requires fine-pitch soldering to install, plan for intermediate-level work and an iron with a fine tip.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cbr\u003e\u003ch2\u003eHall Effect vs TMR, what's the difference?\u003c\/h2\u003e\n\u003ctable\u003e\n \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eTech\u003c\/th\u003e\n\u003cth\u003eHow it works\u003c\/th\u003e\n\u003cth\u003eWhat it's good at\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n\u003ctd\u003eOriginal potentiometer\u003c\/td\u003e\n\u003ctd\u003eCarbon brush wipes a resistive track\u003c\/td\u003e\n\u003ctd\u003eCheap; wears, causing drift\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eHall Effect\u003c\/td\u003e\n\u003ctd\u003eMagnetic field sensed by Hall sensor, no contact in position-sensing path\u003c\/td\u003e\n\u003ctd\u003eEstablished drift-resistant tech, still works long-term\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eTMR\u003c\/td\u003e\n\u003ctd\u003eTunneling Magnetoresistance sensor, newer magnetic-sensor variant\u003c\/td\u003e\n\u003ctd\u003eNewer tech, aimed at finer sensitivity and lower power draw\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cbr\u003e\u003ch2\u003eInstall difficulty by controller\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eN64:\u003c\/strong\u003e drop-in, no soldering, screwdriver only. Beginner-friendly.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eSwitch Joy-Con:\u003c\/strong\u003e drop-in module, no soldering for the stick, but careful Joy-Con disassembly required. Calibration via Switch system settings post-install.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePS4 \/ PS5 \/ Xbox Series:\u003c\/strong\u003e surface-mount soldering on the controller PCB. Intermediate.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWorldwide delivery with tracking on every order.\u003c\/p\u003e\n\n\u003cbr\u003e\u003ch2\u003eRelated collections\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\u003ca href=\"\/en-us\/collections\/ps5-controller-spare-parts\"\u003ePS5 Controller Parts\u003c\/a\u003e\u003c\/li\u003e\n \u003cli\u003e\n\u003ca href=\"\/en-us\/collections\/nintendo-64\"\u003eNintendo 64 Parts\u003c\/a\u003e. N64 controller modules and replacement parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003csection itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n\u003cbr\u003e\u003ch2\u003eHall Effect Analog Sticks. FAQs\u003c\/h2\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003cp\u003e\u003cstrong itemprop=\"name\"\u003eWill Hall Effect sticks fully solve drift?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eHall Effect and TMR sticks use magnetic sensors instead of contact-based potentiometers, avoiding the specific contact-wear failure mode that causes drift on original sticks. They don't make the stick indestructible, a stick can still fail mechanically (worn pivot) or electronically. But the most common cause of drift is removed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\n\u003cbr\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003cp\u003e\u003cstrong itemprop=\"name\"\u003eHow hard is the N64 Hall Effect install?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eEasy. Open the N64 controller (Phillips screws), unplug the original joystick module ribbon, drop in the Hall Effect module, plug back in, close up. No soldering required, just a screwdriver. This is one of the more straightforward controller upgrades for non-technical gamers, the install itself takes minutes once the controller is open.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\n\u003cbr\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003cp\u003e\u003cstrong itemprop=\"name\"\u003eHow hard is the Switch Joy-Con stick swap?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eThe stick module is drop-in (no soldering). The hard part is opening the Joy-Con. Nintendo uses tri-point Y0 screws and the ribbon connectors are fragile. With a Y0 screwdriver and patience, plan for approximately one hour for first-timers, and you'll need to recalibrate via Switch System Settings → Controller and Sensor → Calibrate Control Sticks afterwards.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\n\u003cbr\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003cp\u003e\u003cstrong itemprop=\"name\"\u003eWhy upgrade an N64 controller specifically?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eOriginal N64 sticks use a gear-and-bowl mechanism that physically wears with use. There's a good chance the original stick is loose or no longer centering properly, especially on controllers that have seen regular use. Hall Effect modules from Retro-Bit, Hyperkin and XYAB give you GameCube-style stick feel in the original N64 controller shell, with a sensing mechanism that doesn't wear the same way.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\n\u003cbr\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003cp\u003e\u003cstrong itemprop=\"name\"\u003eAre Ginfull and ZedLabz the same as GuliKit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eDifferent brands. GuliKit is probably the most-cited Hall Effect \/ TMR Joy-Con stick brand in news coverage. Ginfull and the other Joy-Con stick options stocked here are separate brands with the same drop-in dimensions and drift-resistant working principle. They share the magnetic-sensor design and are all reputable manufacturers in the drift-fix space, check the product page reviews for real customer opinions on how each performs in practice.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e","products":[{"product_id":"n64-joystick-replacement-hall-effect-hall-sense-analog-module-repair-part-gamecube-style-retro-bit","title":"Joystick replacement for Nintendo 64 N64 Hall Effect (Hall Sense) analog module repair part (GameCube Style) | Retro-bit","description":"\u003cstrong\u003eFeatures:\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003e- Features Hall Effect potentiometers that won’t drift through use\u003cbr\u003e- Japanese-made analog repair module\u003cbr\u003e- Larger and comfortable thumb grip\u003cbr\u003e- Installation takes less than 5 minutes\u003cbr\u003e- Compatible only with original N64® controllers\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eInspired by our Tribute64®, we’ve brought an improved analog stick for use on original N64® controllers!\u003cbr\u003e\u003cbr\u003eUtilize the full range on this Japanese-made stick that features Hall Effect potentiometers that provides\u003cbr\u003e\u003cbr\u003elong-lasting performance and won’t drift due to wear and tear. The comfortable thumb grip lets you game\u003cbr\u003e\u003cbr\u003efor hours without worrying about lasting effects. The replacement process is very simple and takes less than 5 minutes!\u003cbr\u003e\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\n\u003cp\u003e\u003cstrong\u003eBrowse the range\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"\/en-us\/collections\/retro-bit\"\u003eRetro-Bit products\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/en-us\/collections\/n64-stick-replacement\"\u003eStick replacements for N64\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Retro-Bit","offers":[{"title":"Default Title","offer_id":44516244291836,"sku":"300862","price":13.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/joystick-replacement-for-nintendo-64-n64-hall-effect-hall-sense-analog-module-repair-part-gamecube-style-retro-bit300862retro-bit-824164.jpg?v=1741475400"},{"product_id":"hall-effect-analog-joystick-module-for-nintendo-switch-joy-con-controller-switch-lite-hall-sensor-upgrade-mod-2-pack-black-zedlabz","title":"Hall Effect analog joystick module for Nintendo Switch Joy-con controller \u0026 Switch Lite, hall sensor upgrade mod - 2 Pack black | ZedLabz","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Hall effect joystick module replacement for Switch Joy-con controllers.\u003cbr\u003e- Complete modular part including top rubber thumb stick cap.\u003cbr\u003e- Electromagnetic mechanism avoids the common drifting issues.\u003cbr\u003e- Ideal replacement for drifting, damaged or faulty joysticks.\u003cbr\u003e- Requires technical internal fitting - Tri-wing screwdriver required (not included)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003eFinally put an end to controller drift with our Hall Effect joystick replacements. Designed as the ultimate solution for gamers frustrated by unreliable controls, our Hall Sense joysticks utilize magnetic sensor technology to address the wear issues commonly found in traditional joystick modules.\u003cbr\u003e\u003cbr\u003eWhile the joysticks may look and feel the same as the originals, it's the reworked internal mechanism that sets them apart, leveraging the power of magnets to solve wear issues and premature failures often associated with joy-cons.\u003cbr\u003e\u003cbr\u003eIf you are suffering from drift or random joystick inputs then look no further than our hall sense replacements to keep you in the game and out of the repair shop.\u003cbr\u003e\u003cbr\u003eCompatible with all original Nintendo Switch hardware, including Switch Joycon, Switch OLED Joycon, and Switch Lite models.\u003cbr\u003e\u003cbr\u003eIncludes one pair of hall sense joysticks, it is recommended to replace both the left and right at the same time, there is no left of right module so each replacmeent will fit either the left or right side control.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThe problem with traditional analog sticks: \u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003eThe problem in a nutshell shell is that most drift issues come down to the wearing of physical contacts inside the joystick, a conductive material which works as a resistor, sensing electrical power reading to the controller so that it can identify the position of the joystick.\u003cbr\u003e\u003cbr\u003eIn the case of the original joycon design, it uses sliding metal contact springs on the X and Y axis which touch and move along a conductive film, this film will wear down over time, and the wear on the conductive film causes the electrical readings from the joystick to change, resulting in drift.\u003cbr\u003e\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\u003cstrong\u003eHow hall sense work:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eInside the joystick hall sensor joysticks, there are small IC components called Hall effect sensors, that detect changes in the joystick's position relative to a magnetic field. As you move the joystick, these sensors detect these changes and convert them into electrical signals. These signals are then transmitted to your gaming device, translating your movements into in-game actions. \u003cbr\u003e\u003cbr\u003eThis process happens in real-time, providing accurate and precise control over your gaming experience. By utilizing magnetic sensor technology, Hall Sense joysticks offer consistent and reliable performance thanks to their contact-free mechanism. This ensures that your gaming inputs are always captured with precision, without the risk of drift or inaccuracies over time.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTechnical information:\u003c\/strong\u003e\u003cbr\u003e \u003cbr\u003e\u003cdiv\u003eThis complete modular analog joystick button control is compatible with all regions of Nintendo Switch Joycon controller (Including those supplied with OLED consoles) or Switch Lite console.\u003cbr\u003e\u003cbr\u003eCompatible with the left or right controller, includes one pair of hall sense modules in each pack, enough to upgrade one Joy Con controller set or one Switch Lite console.\u003cbr\u003e\u003cbr\u003eWhilst other gaming devices may use the same Joycon style modules we are only able to guarantee compatibility with official Nintendo controller hardware.\u003c\/div\u003e\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003eRequires technical installation, the joycon controller of Switch Lite console just be opened, please note this will void any manufacturer warranty, opening your device could result in damage if done incorrectly, this is a DIY replacement part which is fitted at your own risk, please consult an expert if you are unsure.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-size: 13px;\"\u003eA tri-wing screwdriver tool required to install this part (not included)\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eCalibrating the replacement joystick after installation:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eYou may need to recalibrate the controller after installing the new module, this can be done on any Nintendo Switch console, follow the following steps.\u003cbr\u003e\u003cbr\u003eFrom the HOME Menu select System Settings, then scroll down the menu on the left-hand side and select Controllers and Sensors.\u003cbr\u003e\u003cbr\u003eSelect Calibrate Control Sticks then fully tilt the control stick in any single direction for a few seconds on the controller you want to calibrate.\u003cbr\u003e\u003cbr\u003eFollow the on-screen prompts to verify the control stick functionality.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIf the calibration is complete but is not immediately reflected when testing the control sticks\u003c\/strong\u003e, do the following:\u003cbr\u003e\u003cbr\u003e- Set the console to sleep mode, then press the POWER Button to \"wake it up\" again.\u003cbr\u003e\u003cbr\u003e- Reset the Joy-Con or Pro Controller by pressing the SYNC Button once, then press any other button to power it on again.\u003cbr\u003e\u003cbr\u003e","brand":"ZedLabz","offers":[{"title":"Default Title","offer_id":45546897768700,"sku":"300140","price":14.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/hall-effect-analog-joystick-module-for-nintendo-switch-joy-con-controller-switch-lite-hall-sensor-upgrade-mod-2-pack-black-zedlabz300140zedlabz-135037.jpg?v=1741475219"},{"product_id":"n64-joystick-replacement-hall-effect-hall-sense-analog-module-repair-part-gamecube-style-hyperkin","title":"N64 Joystick replacement Hall Effect (Hall Sense) analog module repair part (GameCube Style) | Hyperkin","description":"\u003cb\u003eFeatures:\u003cbr\u003e\u003c\/b\u003e\u003cbr\u003e- Compatible with any official Nintendo 64 controller\u003cbr\u003e- GameCube Style with high sensitivity\u003cbr\u003e- Latest Hall Effect Technology\u003cbr\u003e- Easy installation\u003cbr\u003e- Screwdriver required\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003cbr\u003e\u003c\/b\u003e\u003cbr\u003eBrought to you by Hyperkin X Repairbox, update your N64 \u003cbr\u003e\u003cbr\u003eIncrease the lifespan of your original controller by giving it a generational upgrade!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSolder-Free Installation:\u003c\/b\u003e Just pop it in and play! It's that simple.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eHall Effect Sensors:\u003c\/b\u003e Say goodbye to drift and hello to unparalleled accuracy! Our Hall Effect sensors ensure your movements are precise, responsive, and durable. This joystick is built to withstand the test of time and intense gaming marathons.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eGamecube Style Stick:\u003c\/b\u003e Feel the nostalgia and comfort of the Gamecube era while dominating your favorite N64 games. This stick is designed for maximum comfort and a competitive edge, making long gaming sessions a breeze.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eLongevity:\u003c\/b\u003e Increase the life span of your original controller by giving it a generational upgrade!\u003cbr\u003e\u003cbr\u003eTools required to open the controller (not included)\u003cbr\u003e\u003cbr\u003eCompatible with official Nintendo 64 controllers.\u003cbr\u003e\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\n\u003cp\u003e\u003cstrong\u003eBrowse the range\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"\/en-us\/collections\/hyperkin\"\u003eHyperkin products\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/en-us\/collections\/n64-stick-replacement\"\u003eStick replacements for N64\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hyperkin","offers":[{"title":"Default Title","offer_id":46346586325244,"sku":"000434","price":13.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/n64-joystick-replacement-hall-effect-hall-sense-analog-module-repair-part-gamecube-style-hyperkin000434hyperkin-146441.jpg?v=1741475159"},{"product_id":"ultimate-wired-controller-for-xbox-with-hall-effect-joysticks-compatible-with-xbox-series-x-s-xbox-one-windows-10-11-officially-licensed-black-8bitdo","title":"Ultimate Wired Controller for Xbox with Hall Effect Joysticks, Compatible with Xbox Series X|S, Xbox One, Windows 10|11 - Officially Licensed Black | 8BitDo","description":"\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Officially Licensed by Xbox. Compatible with Xbox Series X, Xbox Series S, Xbox One \u0026amp; Windows 10 and above.\u003cbr\u003e- Ultimate Software wirelessly with iOS and Android \u0026amp; wired on Xbox and PC\u003cbr\u003e- Custom Profile switch button, 3 profiles, switch on the fly\u003cbr\u003e- Customize button mapping, adjust stick \u0026amp; trigger sensitivity, vibration control and more\u003cbr\u003e- Two extra Pro-level Back Buttons and 3.5mm Audio Jack to directly connect your headphones\u003cbr\u003e- Perfect classic d-pad, trigger vibration, enhanced grip \u0026amp; a 3 meter cable\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eUltimate control, style, and performance all for a great price. Now upgraded with Hall Effect joysticks. Compatible with Xbox Series X\/S, Xbox One, and Windows.\u003cbr\u003e\u003cbr\u003eHall Effect Joysticks and Triggers - Upgraded. Robust and long-lasting. Offering higher precision and sensitivity.\u003cbr\u003e\u003cbr\u003eA Modern controller that respects the classics - The 8BitDo Ultimate Wired Controller for Xbox was designed with respect for the classics. \u003cbr\u003e\u003cbr\u003eWe paid extra attention to the most critical characteristics like the D-pad, to make sure it feels exactly like you remember it.\u003cbr\u003e\u003cbr\u003e8BitDo Ultimate Software gives you elite control over every piece of your controller. Customize button mapping, adjust stick \u0026amp; trigger sensitivity, vibration control and create controller profiles.\u003cbr\u003e\u003cbr\u003eCustom Profile Switching\r\nWith 8BitDo Ultimate Software, you can save your settings on a game by game basis with the custom profiles and switch on the fly.\u003cbr\u003e\u003cbr\u003eCompatibility Xbox series X \/ S, Xbox One \u0026amp; PC","brand":"8BitDo","offers":[{"title":"Default Title","offer_id":46617116508412,"sku":"900795","price":39.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/ultimate-wired-controller-for-xbox-with-hall-effect-joysticks-compatible-with-xbox-series-xs-xbox-one-windows-1011-officially-licensed-black-8bitdo900795zedlabz-392489.jpg?v=1741475073"},{"product_id":"ultimate-wired-controller-for-xbox-with-hall-effect-joysticks-compatible-with-xbox-series-x-s-xbox-one-windows-10-11-officially-licensed-white-8bitdo","title":"Ultimate Wired Controller for Xbox with Hall Effect Joysticks, Compatible with Xbox Series X|S, Xbox One, Windows 10|11 - Officially Licensed White | 8BitDo","description":"\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Officially Licensed by Xbox. Compatible with Xbox Series X, Xbox Series S, Xbox One \u0026amp; Windows 10 and above.\u003cbr\u003e- Ultimate Software wirelessly with iOS and Android \u0026amp; wired on Xbox and PC\u003cbr\u003e- Custom Profile switch button, 3 profiles, switch on the fly\u003cbr\u003e- Customize button mapping, adjust stick \u0026amp; trigger sensitivity, vibration control and more\u003cbr\u003e- Two extra Pro-level Back Buttons and 3.5mm Audio Jack to directly connect your headphones\u003cbr\u003e- Perfect classic d-pad, trigger vibration, enhanced grip \u0026amp; a 3 meter cable\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eUltimate control, style, and performance all for a great price. Now upgraded with Hall Effect joysticks. Compatible with Xbox Series X\/S, Xbox One, and Windows.\u003cbr\u003e\u003cbr\u003eHall Effect Joysticks and Triggers - Upgraded. Robust and long-lasting. Offering higher precision and sensitivity.\u003cbr\u003e\u003cbr\u003eA Modern controller that respects the classics - The 8BitDo Ultimate Wired Controller for Xbox was designed with respect for the classics. \u003cbr\u003e\u003cbr\u003eWe paid extra attention to the most critical characteristics like the D-pad, to make sure it feels exactly like you remember it.\u003cbr\u003e\u003cbr\u003e8BitDo Ultimate Software gives you elite control over every piece of your controller. Customize button mapping, adjust stick \u0026amp; trigger sensitivity, vibration control and create controller profiles. \u003cbr\u003e\u003cbr\u003eCustom Profile Switching\r\nWith 8BitDo Ultimate Software, you can save your settings on a game by game basis with the custom profiles and switch on the fly.\u003cbr\u003e\u003cbr\u003eCompatibility Xbox series X \/ S, Xbox One \u0026amp; PC","brand":"8BitDo","offers":[{"title":"Default Title","offer_id":46617116672252,"sku":"900794","price":39.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/ultimate-wired-controller-for-xbox-with-hall-effect-joysticks-compatible-with-xbox-series-xs-xbox-one-windows-1011-officially-licensed-white-8bitdo900794zedlabz-181849.jpg?v=1741475073"},{"product_id":"hall-sense-analog-internal-thumbstick-3d-modules-for-sony-ps5-playstation-5-2-pack-favor-union","title":"Hall Effect analog joystick module for Sony PS5 Dual Sense PlayStation 5 controller 3D thumbstick L3 R3, hall sensor upgrade mod - 2 Pack | Favor Union","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Hall effect joystick module replacement for PS5 Dual Sense controllers\u003cbr\u003e- Made by Favor Union, a supplier of Sony\u003cbr\u003e- Electromagnetic mechanism avoids the common drifting issues.\u003cbr\u003e- Can be calibrated with software tool.\u003cbr\u003e- Ideal replacement for drifting, damaged or faulty joysticks.\u003cbr\u003e- Requires technical internal fitting - Philips screwdriver \u0026amp; soldering tools required (not included)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003eTake your PS5 controller into the next century with these replacement internal hall effect analog modules by Favor Union.\u003cbr\u003e\u003cbr\u003eCompatible with Dual Sense controllers, can also be used with Dual Sense Edge but this requires an additional driver board for them to work.\u003cbr\u003e\u003cbr\u003eFavor Union have a long history of providing the highest quality components for controllers, and have been a supplier of Sony for PlayStation first party controllers along side the likes of Alps.\u003cbr\u003e\u003cbr\u003eIf you are suffering from drift or random joystick inputs then look no further than our hall sense replacements to keep you in the game and out of the repair workshop.\u003cbr\u003e\u003cbr\u003eTo install these yourself you will need to be reasonably comfortable with both desoldering and soldering of electronic parts, difficulty level medium, clean and high quality soldering is needed in order for your controller to work properly once installed.\u003cbr\u003e\u003cbr\u003eCompatible with Sony PS5 controllers, please note that opening the controller voids any warranty you may have with the manufacturer and installation of replacement parts is done at your own risk.\u003cbr\u003e\u003cbr\u003eIncludes one pair of hall sense joysticks, it is recommended to replace both the left and right at the same time, there is no left of right module so each replacment will fit either the left or right side control.\u003cbr\u003e\u003cbr\u003eCalibration using an online software tool may be needed once the modules are installed.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy use Hall effect over traditional analog sticks? \u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003eTraditional analog sticks use physical contacts inside the potentiometers, a conductive material and acts as a resistor to read a electrical value that identifies the joystick position. This material wears down over time a bit like breaks in your car, so depending on hours of use or play style the carbon breaks down and the joysticks start to read differently, creating what is known as drift.\u003cbr\u003e\u003cbr\u003eThe pots on the hall sense joysticks utilise magnets which pass over a small IC detecting changes in the joystick's position relative to a magnetic field. As you move the joystick, the sensors detect movement with high sensitiviy to convert them into electrical signals. These signals are then transmitted to your controller just like traditional analogs, translating your movements into in-game actions. \u003cbr\u003e\u003cbr\u003eThis process happens in real-time, providing accurate and precise control over your gaming experience. By utilizing magnetic sensor technology, Hall Sense joysticks offer consistent and reliable performance thanks to their contact-free mechanism. This ensures that your gaming inputs are always captured with precision, without the risk of drift or inaccuracies over time.\u003cbr\u003e\u003cbr\u003eThe hall sense sticks can be calibrated using a software tool at any time to, allowing you to see how the joysticks are functioning, set the dead center and adjust the range settings.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTechnical information:\u003c\/strong\u003e\u003cbr\u003e \u003cbr\u003e\u003cdiv\u003eThis analog joystick button control is compatible with Sony PS5 Dual sense controllers and needs to be soldered onto the controllers mainboard. Dual Sense edge controllers need an additional driver board to make them function (available seperately)\u003cbr\u003e\u003cbr\u003eThere is no left or right module, you can use any module to replace a left or right, you can keep spares and change the left or right multiple times, it is recommended you install these as a pair but if you ever need to change one out you can change one at a time as needed.\u003cbr\u003e\u003cbr\u003eThe analog modules can be calibrated using an online tool for the center position and range of movement.\u003c\/div\u003e\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003eRequires technical installation, the parts must be soldered, you will need to also be able to desolder the mold modules. \u003cbr\u003e\u003cbr\u003ePlease note this will void any manufacturer warranty, opening your device could result in damage if done incorrectly, this is a DIY replacement part which is fitted at your own risk, please consult an expert if you are unsure.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-size: 13px;\"\u003eA Philips screwdriver tool required to install this part (not included)\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eCalibrating the replacement joystick after installation:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eYou may need to recalibrate the controller joysticks after installing the new modules, this can be done using the tool on the website: dualshock.tools-gihub.io\u003cbr\u003e\u003cbr\u003e\n\n\u003cp\u003e\u003cstrong\u003eBrowse the range\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"\/en-us\/collections\/ps5-controller-spare-parts-mods\"\u003eController spare parts mods for ps5\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/en-us\/collections\/ps5-controller-spare-parts\"\u003eController spare parts for ps5\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Favor Union","offers":[{"title":"Default Title","offer_id":46716663431420,"sku":"300445","price":10.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/hall-effect-analog-joystick-module-for-sony-ps5-dual-sense-playstation-5-controller-3d-thumbstick-l3-r3-hall-sensor-upgrade-mod-2-pack-favor-union300445favor-un-286924.jpg?v=1741475043"},{"product_id":"n64-joystick-replacement-hall-effect-xyab","title":"N64 hall effect stick for N64 Nintendo 64 joystick replacement analog module | XYAB","description":"\u003cb\u003eFeatures:\u003cbr\u003e\u003c\/b\u003e\u003cbr\u003e- Compatible with any official Nintendo 64 controller\u003cbr\u003e- Traditional style stick\u003cbr\u003e- Easy installation\u003cbr\u003e- Screwdriver required\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003cbr\u003e\u003c\/b\u003e\u003cbr\u003eHall Effect replacement for original, broken joystick thumb stick assemblies for N64 Nintendo 64® controllers.\u003cbr\u003e\u003cbr\u003eFeatures a true-to-original bowl and stick design with Hall Effect Sensors\u003cbr\u003e\u003cbr\u003eSolder-free installation (Plug and Play).\u003cbr\u003e\u003cbr\u003eUpgraded lifespan with next-gen Hall Effect technology.\u003cbr\u003e\u003cbr\u003eCompatible with official Nintendo 64 controllers.\u003cbr\u003e\u003cbr\u003eThis is a third party product which is not designed, manufactured, sponsored, endorsed, or licensed by Nintendo\u003cbr\u003e\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\n\u003cp\u003e\u003cstrong\u003eBrowse the range\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"\/en-us\/collections\/n64-stick-replacement\"\u003eStick replacements for N64\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/en-us\/collections\/retro\"\u003eRetro gaming parts and accessories\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XYAB","offers":[{"title":"Default Title","offer_id":46762530701564,"sku":"000620","price":13.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/n64-hall-effect-stick-for-n64-nintendo-64-joystick-replacement-analog-module-xyab000620xyab-832125.jpg?v=1741474935"},{"product_id":"replacement-hall-effect-analog-joystick-for-nintendo-switch-joy-con-controller-3d-button-module-black-repair-box","title":"Hall Effect joystick module for Nintendo Switch, Switch OLED \u0026 Switch Lite - black | Repair Box","description":"\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Hall effect joystick module replacement for Switch Joy-con controllers \u0026amp; Switch Lite\u003cbr\u003e- Complete modular part including top rubber thumb stick cap.\u003cbr\u003e- Includes one module.\u003cbr\u003e- Ideal replacement for drifting, damaged or faulty joysticks.\u003cbr\u003e\u003cspan style=\"font-size: 13px;\"\u003e- Requires internal fitting - Tri-wing screwdriver required (not included)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003cbr\u003e\u003c\/b\u003e\u003cbr\u003eReplacement Hall Effect joystick module from Repair Box.\u003cbr\u003e\u003cbr\u003eThis part is compatible with Nintendo Switch Joy-con controllers including Switch OLED. It is also compatible with Switch Lite.\u003cbr\u003e\u003cbr\u003eIncludes one joystick module, tools are required to install this part (not included)\n\n\u003cp\u003e\u003cstrong\u003eBrowse the range\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"\/en-us\/collections\/switch-joy-con-replacement-parts\"\u003eJoy-Con replacement parts\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/en-us\/collections\/switch\"\u003eNintendo Switch parts and accessories\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Repair Box","offers":[{"title":"Default Title","offer_id":46921523560700,"sku":"000849","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/hall-effect-joystick-module-for-nintendo-switch-switch-oled-switch-lite-black-repair-box000849zedlabz-493395.jpg?v=1741474922"},{"product_id":"hall-sense-analog-internal-thumbstick-3d-modules-for-sony-ps4-playstation-4-2-pack-favor-union","title":"Hall Effect analog joystick module for Sony PS4 Dual Sense PlayStation 4 controller 3D thumbstick L3 R3, hall sensor upgrade mod - 2 Pack | Favor Union","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Hall effect joystick module replacement for Sony PS4 controllers\u003cbr\u003e- Made by Favor Union, a supplier of Sony\u003cbr\u003e- Electromagnetic mechanism avoids the common drifting issues.\u003cbr\u003e- Can be calibrated with software tool.\u003cbr\u003e- Ideal replacement for drifting, damaged or faulty joysticks.\u003cbr\u003e- Requires technical internal fitting - Philips screwdriver \u0026amp; soldering tools required (not included)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003eLevel up your PS4 controller with Favor Union's next-gen hall effect analog stick modules—designed for precision, built to last. Say goodbye to stick drift and hello to smooth, responsive gameplay.\u003cbr\u003e\u003cbr\u003eCompatible with Sony PS4 controllers, all variants of Sony PS4 official controller can be fitted with these modules.\u003cbr\u003e\u003cbr\u003eFavor Union have a long history of providing the highest quality components for controllers, and have been a supplier of Sony for PlayStation first party controllers along side the likes of Alps.\u003cbr\u003e\u003cbr\u003eIf you are suffering from drift or random joystick inputs then look no further than our hall sense replacements to keep you in the game and out of the repair workshop.\u003cbr\u003e\u003cbr\u003eTo install these yourself you will need to be reasonably comfortable with both desoldering and soldering of electronic parts, difficulty level medium, clean and high quality soldering is needed in order for your controller to work properly once installed.\u003cbr\u003e\u003cbr\u003eCompatible with Sony PS4 controllers, please note that opening the controller voids any warranty you may have with the manufacturer and installation of replacement parts is done at your own risk.\u003cbr\u003e\u003cbr\u003eIncludes one pair of hall sense joysticks, it is recommended to replace both the left and right at the same time, there is no left of right module so each replacment will fit either the left or right side control.\u003cbr\u003e\u003cbr\u003eCalibration using an online software tool may be needed once the modules are installed.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy use Hall effect over traditional analog sticks? \u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003eTraditional analog sticks use physical contacts inside the potentiometers, a conductive material and acts as a resistor to read a electrical value that identifies the joystick position. This material wears down over time a bit like breaks in your car, so depending on hours of use or play style the carbon breaks down and the joysticks start to read differently, creating what is known as drift.\u003cbr\u003e\u003cbr\u003eThe pots on the hall sense joysticks utilise magnets which pass over a small IC detecting changes in the joystick's position relative to a magnetic field. As you move the joystick, the sensors detect movement with high sensitiviy to convert them into electrical signals. These signals are then transmitted to your controller just like traditional analogs, translating your movements into in-game actions. \u003cbr\u003e\u003cbr\u003eThis process happens in real-time, providing accurate and precise control over your gaming experience. By utilizing magnetic sensor technology, Hall Sense joysticks offer consistent and reliable performance thanks to their contact-free mechanism. This ensures that your gaming inputs are always captured with precision, without the risk of drift or inaccuracies over time.\u003cbr\u003e\u003cbr\u003eThe hall sense sticks can be calibrated using a software tool at any time to, allowing you to see how the joysticks are functioning, set the dead center and adjust the range settings.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTechnical information:\u003c\/strong\u003e\u003cbr\u003e \u003cbr\u003e\u003cdiv\u003eThis analog joystick button control is compatible with original Sony PS4 controllers and needs to be soldered onto the controllers mainboard.\u003cbr\u003e\u003cbr\u003eThere is no left or right module, you can use any module to replace a left or right, you can keep spares and change the left or right multiple times, it is recommended you install these as a pair but if you ever need to change one out you can change one at a time as needed.\u003cbr\u003e\u003cbr\u003eThe analog modules can be calibrated using an online tool for the center position and range of movement.\u003c\/div\u003e\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003eRequires technical installation, the parts must be soldered, you will need to also be able to desolder the mold modules. \u003cbr\u003e\u003cbr\u003ePlease note this will void any manufacturer warranty, opening your device could result in damage if done incorrectly, this is a DIY replacement part which is fitted at your own risk, please consult an expert if you are unsure.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-size: 13px;\"\u003eA Philips screwdriver tool required to install this part (not included)\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eCalibrating the replacement joystick after installation:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eYou may need to recalibrate the controller joysticks after installing the new modules, this can be done using the tool on the website: https:\/\/dualshock-tools.github.io\/\u003cbr\u003e\u003cbr\u003e\n\n\u003cp\u003e\u003cstrong\u003eBrowse the range\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"\/en-us\/collections\/ps4\"\u003ePS4 parts and accessories\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/en-us\/collections\/ps4-console-spare-parts-mods\"\u003eConsole spare parts mods for ps4\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Favor Union","offers":[{"title":"Default Title","offer_id":47045160763644,"sku":"300446","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/hall-effect-analog-joystick-module-for-sony-ps4-dual-sense-playstation-4-controller-3d-thumbstick-l3-r3-hall-sensor-upgrade-mod-2-pack-favor-unionfavor-union-307086.png?v=1744245915"},{"product_id":"tmr-analog-internal-thumbstick-3d-modules-for-sony-ps5-playstation-5-2-pack-favor-union","title":"TMR analog joystick module for Sony PS5 Dual Sense PlayStation 5 controller 3D thumbstick L3 R3 upgrade mod - 2 Pack | Favor Union","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Latest TMR joystick module replacement for PS5 controllers\u003cbr\u003e- Made by Favor Union, a supplier of Sony\u003cbr\u003e- No physical contact inside sensors,  avoids the common drifting issues.\u003cbr\u003e- Can be calibrated with software tool.\u003cbr\u003e- Ideal replacement for drifting, damaged or faulty joysticks.\u003cbr\u003e- Requires technical internal fitting - Philips screwdriver \u0026amp; soldering tools required (not included)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003eUpgrade your PlayStation 5 Dual Sense controller with next-generation TMR (Tunnel Magnetoresistance) Hall Effect joystick modules from Favor Union — designed for precision, durability, and zero stick drift.\u003cbr\u003e\u003cbr\u003eCompatible with Dual Sense controllers, can also be used with Dual Sense Edge but this requires an additional driver board for them to work.\u003cbr\u003e\u003cbr\u003eFavor Union have a long history of providing the highest quality components for controllers, and have been a supplier of Sony for PlayStation first party controllers along side the likes of Alps.\u003cbr\u003e\u003cbr\u003eIf you want to put an end to drift and endless repairs these TMR modules are the answer, they are the next step up from Hall sense modules and the latest available solution.\u003cbr\u003e\u003cbr\u003eTo install these yourself you will need to be reasonably comfortable with both desoldering and soldering of electronic parts, difficulty level medium, clean and high quality soldering is needed in order for your controller to work properly once installed.\u003cbr\u003e\u003cbr\u003eCompatible with Sony PS5 controllers, please note that opening the controller voids any warranty you may have with the manufacturer and installation of replacement parts is done at your own risk.\u003cbr\u003e\u003cbr\u003eIncludes one pair of TMR joysticks, it is recommended to replace both the left and right at the same time, there is no left of right module so each replacment will fit either the left or right side control.\u003cbr\u003e\u003cbr\u003eCalibration using an online software tool may be needed once the modules are installed.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat are TMR analog sticks? \u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003eTMR (Tunnel Magnetoresistance) joystick modules are a cutting-edge upgrade for PS5 controllers, offering superior performance, durability, and zero stick drift. \u003cbr\u003e\u003cbr\u003eUnlike traditional analog sticks that rely on physical contact and wear down over time, TMR modules use magnetic field sensing with no physical contact between the magnet and sensor, eliminating drift entirely. \u003cbr\u003e\u003cbr\u003eThey deliver higher resolution and accuracy than standard Hall effect sensors, making them ideal for precise, responsive control in competitive gaming. \u003cbr\u003e\u003cbr\u003eIn addition they have lower power consumption and do not interfere with electromagnetic trigger buttons\u003cbr\u003e\u003cbr\u003eWith a longer lifespan and no degrading contact points, these modules are perfect for high-use controllers, professional repairs, or anyone looking for a true performance upgrade.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTechnical information:\u003c\/strong\u003e\u003cbr\u003e \u003cbr\u003e\u003cdiv\u003eThis analog joystick button control is compatible with Sony PS5 Dual sense controllers and needs to be soldered onto the controllers mainboard. Dual Sense edge controllers need an additional driver board to make them function (available seperately)\u003cbr\u003e\u003cbr\u003eThere is no left or right module, you can use any module to replace a left or right, you can keep spares and change the left or right multiple times, it is recommended you install these as a pair but if you ever need to change one out you can change one at a time as needed.\u003cbr\u003e\u003cbr\u003eThe analog modules can be calibrated using an online tool for the center position and range of movement.\u003c\/div\u003e\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003eRequires technical installation, the parts must be soldered, you will need to also be able to desolder the mold modules. \u003cbr\u003e\u003cbr\u003ePlease note this will void any manufacturer warranty, opening your device could result in damage if done incorrectly, this is a DIY replacement part which is fitted at your own risk, please consult an expert if you are unsure.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-size: 13px;\"\u003eA Philips screwdriver tool required to install this part (not included)\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eCalibrating the replacement joystick after installation:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eYou may need to recalibrate the controller joysticks after installing the new modules, this can be done using the tool on the website: dualshock.tools-gihub.io\u003cbr\u003e\u003cbr\u003e\n\n\u003cp\u003e\u003cstrong\u003eBrowse the range\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"\/en-us\/collections\/ps5-controller-spare-parts-mods\"\u003eController spare parts mods for ps5\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/en-us\/collections\/ps5-controller-spare-parts\"\u003eController spare parts for ps5\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Favor Union","offers":[{"title":"Default Title","offer_id":47156479394044,"sku":"000886","price":13.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/tmr-analog-joystick-module-for-sony-ps5-dual-sense-playstation-5-controller-3d-thumbstick-l3-r3-upgrade-mod-2-pack-favor-unionfavor-union-374531.png?v=1747192779"},{"product_id":"tmr-analog-internal-thumbstick-3d-modules-for-xbox-series-sx-elite-1-2-pack-favor-union","title":"TMR analog joystick module for Xbox Series S \/ X \u0026 Elite 1 controllers 3D thumbstick L3 R3 upgrade mod - 2 Pack | Favor Union","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Latest TMR joystick module for Xbox Series S\/X \u0026amp; Elite 1\u003cbr\u003e- Made by Favor Union, a supplier of Sony\u003cbr\u003e- No physical contact inside sensors,  avoids the common drifting issues.\u003cbr\u003e- Can be calibrated with software tool.\u003cbr\u003e- Ideal replacement for drifting, damaged or faulty joysticks.\u003cbr\u003e- Requires technical internal fitting - Philips screwdriver \u0026amp; soldering tools required (not included)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003eUpgrade your Xbox controller with next-generation TMR (Tunnel Magnetoresistance) Hall Effect joystick modules from Favor Union — designed for precision, durability, and zero stick drift.\u003cbr\u003e\u003cbr\u003eCompatible with Series S \/ X and Elite 1 controllers\u003cbr\u003e\u003cbr\u003eFavor Union have a long history of providing the highest quality components for controllers, and have been a supplier of Sony for PlayStation first party controllers along side the likes of Alps.\u003cbr\u003e\u003cbr\u003eIf you want to put an end to drift and endless repairs these TMR modules are the answer, they are the next step up from Hall sense modules and the latest available solution.\u003cbr\u003e\u003cbr\u003eTo install these yourself you will need to be reasonably comfortable with both desoldering and soldering of electronic parts, difficulty level medium, clean and high quality soldering is needed in order for your controller to work properly once installed.\u003cbr\u003e\u003cbr\u003eCompatible with Microsoft Xbox official controllers, please note that opening the controller voids any warranty you may have with the manufacturer and installation of replacement parts is done at your own risk.\u003cbr\u003e\u003cbr\u003eIncludes one pair of TMR joysticks, it is recommended to replace both the left and right at the same time, there is no left of right module so each replacment will fit either the left or right side control.\u003cbr\u003e\u003cbr\u003eCalibration using an online software tool may be needed once the modules are installed.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat are TMR analog sticks? \u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003eTMR (Tunnel Magnetoresistance) joystick modules are a cutting-edge upgrade for Xbox controllers, offering superior performance, durability, and zero stick drift. \u003cbr\u003e\u003cbr\u003eUnlike traditional analog sticks that rely on physical contact and wear down over time, TMR modules use magnetic field sensing with no physical contact between the magnet and sensor, eliminating drift entirely. \u003cbr\u003e\u003cbr\u003eThey deliver higher resolution and accuracy than standard Hall effect sensors, making them ideal for precise, responsive control in competitive gaming. \u003cbr\u003e\u003cbr\u003eIn addition they have lower power consumption and do not interfere with electromagnetic trigger buttons, making them ideal for the latest Xbox controller pads.\u003cbr\u003e\u003cbr\u003eWith a longer lifespan and no degrading contact points, these modules are perfect for high-use controllers, professional repairs, or anyone looking for a true performance upgrade.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTechnical information:\u003c\/strong\u003e\u003cbr\u003e \u003cbr\u003e\u003cdiv\u003eThis analog joystick button control is compatible with Microsoft Xbox Series S \/ X and Elite 1 controllers, they need to be soldered onto the controllers mainboard.\u003cbr\u003e\u003cbr\u003eThere is no left or right module, you can use any module to replace a left or right, you can keep spares and change the left or right multiple times, it is recommended you install these as a pair but if you ever need to change one out you can change one at a time as needed.\u003cbr\u003e\u003cbr\u003eThe analog modules can be calibrated using an online tool for the center position and range of movement.\u003c\/div\u003e\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003eRequires technical installation, the parts must be soldered, you will need to also be able to desolder the mold modules. \u003cbr\u003e\u003cbr\u003ePlease note this will void any manufacturer warranty, opening your device could result in damage if done incorrectly, this is a DIY replacement part which is fitted at your own risk, please consult an expert if you are unsure.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-size: 13px;\"\u003eA Philips screwdriver tool required to install this part (not included)\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eCalibrating the replacement joystick after installation:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eYou may need to recalibrate the controller joysticks after installing the new modules, this can be done using the tool on the website: dualshock.tools-gihub.io\u003cbr\u003e\u003cbr\u003e\n\n\u003cp\u003e\u003cstrong\u003eBrowse the range\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"\/en-us\/collections\/xbox-one\"\u003eXbox One parts and accessories\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/en-us\/collections\/xbox-series-s-x\"\u003eXbox Series S \/ X parts and accessories\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Favor Union","offers":[{"title":"Default Title","offer_id":47156513931516,"sku":"000887","price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/tmr-analog-joystick-module-for-xbox-series-s-x-elite-1-controllers-3d-thumbstick-l3-r3-upgrade-mod-2-pack-favor-unionzedlabz-272562.jpg?v=1747192779"},{"product_id":"tmr-analog-joystick-module-for-nintendo-switch-joy-con-controller-switch-lite-sensor-upgrade-mod-2-pack-black-ginfull","title":"TMR analog joystick module for Nintendo Switch Joy-con controller \u0026 Switch Lite, sensor upgrade mod - 2 Pack black | Ginfull","description":"\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- TMR joystick module replacement for Switch Joy-con controllers.\u003cbr\u003e- Complete modular part including top rubber thumb stick cap.\u003cbr\u003e- Tunnel Magnetoresistance mechanism avoids the common drifting issues.\u003cbr\u003e- Ideal replacement for drifting, damaged or faulty joysticks.\u003cbr\u003e- Requires technical internal fitting - Tri-wing screwdriver required (not included)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFinally, say goodbye to controller drift with Ginfull TMR joystick replacements. Designed for gamers tired of unreliable controls, Ginfull TMR Sense joysticks use advanced magnetic sensor technology to tackle the common wear issues that plague traditional joystick modules.\u003c\/p\u003e\n\u003cp\u003eWhile the Ginfull TMR Sense joysticks maintain a familiar feel, they are built with a more accurate and durable internal mechanism. By utilizing magnetic technology instead of the usual carbon contacts, these joysticks offer superior precision and eliminate the risk of wear and premature failures that often cause drift in the original models.\u003c\/p\u003e\n\u003cp\u003eIf you’ve been battling drift or random joystick inputs, Ginfull TMR Sense replacements are the perfect solution to keep you playing and avoid costly repairs.\u003c\/p\u003e\n\u003cp\u003eCompatible with all original Nintendo Switch hardware, including Switch Joy-Con, Switch OLED Joy-Con, and Switch Lite models.\u003c\/p\u003e\n\u003cp\u003eEach pack includes one pair of Ginfull TMR joysticks. We recommend replacing both the left and right joysticks at the same time, as each module can be used on either side (there is no left or right-specific module).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe problem with traditional joycon analog modules:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you’ve ever had your game character move on their own or struggle to stay still, you’ve likely experienced “Joy-Con drift.” It’s one of the most frustrating issues for Switch players, and it’s not your fault. \u003c\/p\u003e\n\u003cp\u003eThe original Joy-Con joysticks use carbon contacts inside the controller that wear down over time with regular use. These contacts help detect the joystick’s position, but as they get rubbed by constant movement, they wear down, reducing the performance until it no longer functions properly and starts to move on its own, a problem commonly referrred to as drift.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow TMR modules work to solve drift:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTMR (Tunnel Magnetoresistance) modules provide a simple, yet highly effective solution to joystick drift.\u003c\/p\u003e\n\u003cp\u003eUnlike the original Joy-Con design, TMR sensors use magnetic fields to detect movement, the sensor doesn’t rely on physical contact, so there’s no friction or wear that can degrade performance.\u003c\/p\u003e\n\u003cp\u003eAs the joystick moves, a small magnet interacts with the TMR sensor, providing precise and accurate readings without the risk of drift. This contactless technology ensures smoother, longer-lasting performance, giving you a more reliable gaming experience free from the frustration of drifting controls.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cp\u003eThis complete modular analog TMR joystick is compatible with all regions of Nintendo Switch Joycon controller (Including those supplied with OLED consoles) or Switch Lite console.\u003c\/p\u003e\n\u003cp\u003eCompatible with the left or right controller, includes one pair of TMR modules in each pack, enough to upgrade one Joy Con controller set or one Switch Lite console.\u003c\/p\u003e\n\u003cp\u003eWhilst other gaming devices may use the same Joycon style modules we are only able to guarantee compatibility with official Nintendo controller hardware.\u003c\/p\u003e\n\u003cp\u003eRequires technical installation, the joycon controller of Switch Lite console just be opened, please note this will void any manufacturer warranty, opening your device could result in damage if done incorrectly, this is a DIY replacement part which is fitted at your own risk, please consult an expert if you are unsure.\u003c\/p\u003e\n\u003cp\u003eA tri-wing screwdriver tool required to install this part (not included)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003eCalibrating the replacement joystick after installation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou may need to recalibrate the controller after installing the new module, this can be done on any Nintendo Switch console, follow the following steps.\u003c\/p\u003e\n\u003cp\u003eFrom the HOME Menu select System Settings, then scroll down the menu on the left-hand side and select Controllers and Sensors.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eSelect Calibrate Control Sticks then fully tilt the control stick in any single direction for a few seconds on the controller you want to calibrate.\u003c\/p\u003e\n\u003cp\u003eFollow the on-screen prompts to verify the control stick functionality.\u003cbr\u003eIf the calibration is complete but is not immediately reflected when testing the control sticks, do the following:\u003c\/p\u003e\n\u003cp\u003e- Set the console to sleep mode, then press the POWER Button to \"wake it up\" again.\u003cbr\u003e- Reset the Joy-Con or Pro Controller by pressing the SYNC Button once, then press any other button to power it on again.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eBrowse the range\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"\/en-us\/collections\/switch-joy-con-replacement-parts\"\u003eJoy-Con replacement parts\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/en-us\/collections\/switch\"\u003eNintendo Switch parts and accessories\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ginfull","offers":[{"title":"Default Title","offer_id":47166492279036,"sku":"000893","price":16.29,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/tmr-analog-joystick-module-for-nintendo-switch-joy-con-controller-switch-lite-sensor-upgrade-mod-2-pack-black-ginfullzedlabz-315108.jpg?v=1747453155"},{"product_id":"tmr-analog-joystick-module-for-nintendo-switch-joy-con-controller-switch-lite-sensor-upgrade-mod-2-pack-white-ginfull","title":"TMR analog joystick module for Nintendo Switch Joy-con controller \u0026 Switch Lite, sensor upgrade mod - 2 Pack white | Ginfull","description":"\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- TMR joystick module replacement for Switch Joy-con controllers.\u003cbr\u003e- Complete modular part including top rubber thumb stick cap.\u003cbr\u003e- Tunnel Magnetoresistance mechanism avoids the common drifting issues.\u003cbr\u003e- Ideal replacement for drifting, damaged or faulty joysticks.\u003cbr\u003e- Requires technical internal fitting - Tri-wing screwdriver required (not included)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFinally, say goodbye to controller drift with Ginfull TMR joystick replacements. Designed for gamers tired of unreliable controls, Ginfull TMR Sense joysticks use advanced magnetic sensor technology to tackle the common wear issues that plague traditional joystick modules.\u003c\/p\u003e\n\u003cp\u003eWhile the Ginfull TMR Sense joysticks maintain a familiar feel, they are built with a more accurate and durable internal mechanism. By utilizing magnetic technology instead of the usual carbon contacts, these joysticks offer superior precision and eliminate the risk of wear and premature failures that often cause drift in the original models.\u003c\/p\u003e\n\u003cp\u003eIf you’ve been battling drift or random joystick inputs, Ginfull TMR Sense replacements are the perfect solution to keep you playing and avoid costly repairs.\u003c\/p\u003e\n\u003cp\u003eCompatible with all original Nintendo Switch hardware, including Switch Joy-Con, Switch OLED Joy-Con, and Switch Lite models.\u003c\/p\u003e\n\u003cp\u003eEach pack includes one pair of Ginfull TMR joysticks. We recommend replacing both the left and right joysticks at the same time, as each module can be used on either side (there is no left or right-specific module).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe problem with traditional joycon analog modules:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you’ve ever had your game character move on their own or struggle to stay still, you’ve likely experienced “Joy-Con drift.” It’s one of the most frustrating issues for Switch players, and it’s not your fault. \u003c\/p\u003e\n\u003cp\u003eThe original Joy-Con joysticks use carbon contacts inside the controller that wear down over time with regular use. These contacts help detect the joystick’s position, but as they get rubbed by constant movement, they wear down, reducing the performance until it no longer functions properly and starts to move on its own, a problem commonly referrred to as drift.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow TMR modules work to solve drift:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTMR (Tunnel Magnetoresistance) modules provide a simple, yet highly effective solution to joystick drift.\u003c\/p\u003e\n\u003cp\u003eUnlike the original Joy-Con design, TMR sensors use magnetic fields to detect movement, the sensor doesn’t rely on physical contact, so there’s no friction or wear that can degrade performance.\u003c\/p\u003e\n\u003cp\u003eAs the joystick moves, a small magnet interacts with the TMR sensor, providing precise and accurate readings without the risk of drift. This contactless technology ensures smoother, longer-lasting performance, giving you a more reliable gaming experience free from the frustration of drifting controls.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cp\u003eThis complete modular analog TMR joystick is compatible with all regions of Nintendo Switch Joycon controller (Including those supplied with OLED consoles) or Switch Lite console.\u003c\/p\u003e\n\u003cp\u003eCompatible with the left or right controller, includes one pair of TMR modules in each pack, enough to upgrade one Joy Con controller set or one Switch Lite console.\u003c\/p\u003e\n\u003cp\u003eWhilst other gaming devices may use the same Joycon style modules we are only able to guarantee compatibility with official Nintendo controller hardware.\u003c\/p\u003e\n\u003cp\u003eRequires technical installation, the joycon controller of Switch Lite console just be opened, please note this will void any manufacturer warranty, opening your device could result in damage if done incorrectly, this is a DIY replacement part which is fitted at your own risk, please consult an expert if you are unsure.\u003c\/p\u003e\n\u003cp\u003eA tri-wing screwdriver tool required to install this part (not included)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003eCalibrating the replacement joystick after installation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou may need to recalibrate the controller after installing the new module, this can be done on any Nintendo Switch console, follow the following steps.\u003c\/p\u003e\n\u003cp\u003eFrom the HOME Menu select System Settings, then scroll down the menu on the left-hand side and select Controllers and Sensors.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eSelect Calibrate Control Sticks then fully tilt the control stick in any single direction for a few seconds on the controller you want to calibrate.\u003c\/p\u003e\n\u003cp\u003eFollow the on-screen prompts to verify the control stick functionality.\u003cbr\u003eIf the calibration is complete but is not immediately reflected when testing the control sticks, do the following:\u003c\/p\u003e\n\u003cp\u003e- Set the console to sleep mode, then press the POWER Button to \"wake it up\" again.\u003cbr\u003e- Reset the Joy-Con or Pro Controller by pressing the SYNC Button once, then press any other button to power it on again.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eBrowse the range\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"\/en-us\/collections\/switch-joy-con-replacement-parts\"\u003eJoy-Con replacement parts\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/en-us\/collections\/switch\"\u003eNintendo Switch parts and accessories\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ginfull","offers":[{"title":"Default Title","offer_id":47170950103292,"sku":"000894","price":16.29,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/tmr-analog-joystick-module-for-nintendo-switch-joy-con-controller-switch-lite-sensor-upgrade-mod-2-pack-white-ginfullzedlabz-261952.jpg?v=1747453154"},{"product_id":"tmr-analog-joystick-module-for-nintendo-switch-joy-con-controller-switch-lite-sensor-upgrade-mod-2-pack-blue-ginfull","title":"TMR analog joystick module for Nintendo Switch Joy-con controller \u0026 Switch Lite, sensor upgrade mod - 2 Pack blue | Ginfull","description":"\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- TMR joystick module replacement for Switch Joy-con controllers.\u003cbr\u003e- Complete modular part including top rubber thumb stick cap.\u003cbr\u003e- Tunnel Magnetoresistance mechanism avoids the common drifting issues.\u003cbr\u003e- Ideal replacement for drifting, damaged or faulty joysticks.\u003cbr\u003e- Requires technical internal fitting - Tri-wing screwdriver required (not included)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFinally, say goodbye to controller drift with Ginfull TMR joystick replacements. Designed for gamers tired of unreliable controls, Ginfull TMR Sense joysticks use advanced magnetic sensor technology to tackle the common wear issues that plague traditional joystick modules.\u003c\/p\u003e\n\u003cp\u003eWhile the Ginfull TMR Sense joysticks maintain a familiar feel, they are built with a more accurate and durable internal mechanism. By utilizing magnetic technology instead of the usual carbon contacts, these joysticks offer superior precision and eliminate the risk of wear and premature failures that often cause drift in the original models.\u003c\/p\u003e\n\u003cp\u003eIf you’ve been battling drift or random joystick inputs, Ginfull TMR Sense replacements are the perfect solution to keep you playing and avoid costly repairs.\u003c\/p\u003e\n\u003cp\u003eCompatible with all original Nintendo Switch hardware, including Switch Joy-Con, Switch OLED Joy-Con, and Switch Lite models.\u003c\/p\u003e\n\u003cp\u003eEach pack includes one pair of Ginfull TMR joysticks. We recommend replacing both the left and right joysticks at the same time, as each module can be used on either side (there is no left or right-specific module).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe problem with traditional joycon analog modules:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you’ve ever had your game character move on their own or struggle to stay still, you’ve likely experienced “Joy-Con drift.” It’s one of the most frustrating issues for Switch players, and it’s not your fault. \u003c\/p\u003e\n\u003cp\u003eThe original Joy-Con joysticks use carbon contacts inside the controller that wear down over time with regular use. These contacts help detect the joystick’s position, but as they get rubbed by constant movement, they wear down, reducing the performance until it no longer functions properly and starts to move on its own, a problem commonly referrred to as drift.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow TMR modules work to solve drift:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTMR (Tunnel Magnetoresistance) modules provide a simple, yet highly effective solution to joystick drift.\u003c\/p\u003e\n\u003cp\u003eUnlike the original Joy-Con design, TMR sensors use magnetic fields to detect movement, the sensor doesn’t rely on physical contact, so there’s no friction or wear that can degrade performance.\u003c\/p\u003e\n\u003cp\u003eAs the joystick moves, a small magnet interacts with the TMR sensor, providing precise and accurate readings without the risk of drift. This contactless technology ensures smoother, longer-lasting performance, giving you a more reliable gaming experience free from the frustration of drifting controls.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cp\u003eThis complete modular analog TMR joystick is compatible with all regions of Nintendo Switch Joycon controller (Including those supplied with OLED consoles) or Switch Lite console.\u003c\/p\u003e\n\u003cp\u003eCompatible with the left or right controller, includes one pair of TMR modules in each pack, enough to upgrade one Joy Con controller set or one Switch Lite console.\u003c\/p\u003e\n\u003cp\u003eWhilst other gaming devices may use the same Joycon style modules we are only able to guarantee compatibility with official Nintendo controller hardware.\u003c\/p\u003e\n\u003cp\u003eRequires technical installation, the joycon controller of Switch Lite console just be opened, please note this will void any manufacturer warranty, opening your device could result in damage if done incorrectly, this is a DIY replacement part which is fitted at your own risk, please consult an expert if you are unsure.\u003c\/p\u003e\n\u003cp\u003eA tri-wing screwdriver tool required to install this part (not included)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003eCalibrating the replacement joystick after installation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou may need to recalibrate the controller after installing the new module, this can be done on any Nintendo Switch console, follow the following steps.\u003c\/p\u003e\n\u003cp\u003eFrom the HOME Menu select System Settings, then scroll down the menu on the left-hand side and select Controllers and Sensors.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eSelect Calibrate Control Sticks then fully tilt the control stick in any single direction for a few seconds on the controller you want to calibrate.\u003c\/p\u003e\n\u003cp\u003eFollow the on-screen prompts to verify the control stick functionality.\u003cbr\u003eIf the calibration is complete but is not immediately reflected when testing the control sticks, do the following:\u003c\/p\u003e\n\u003cp\u003e- Set the console to sleep mode, then press the POWER Button to \"wake it up\" again.\u003cbr\u003e- Reset the Joy-Con or Pro Controller by pressing the SYNC Button once, then press any other button to power it on again.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eBrowse the range\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"\/en-us\/collections\/switch-joy-con-replacement-parts\"\u003eJoy-Con replacement parts\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/en-us\/collections\/switch\"\u003eNintendo Switch parts and accessories\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ginfull","offers":[{"title":"Default Title","offer_id":47171618930940,"sku":"000895","price":15.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/tmr-analog-joystick-module-for-nintendo-switch-joy-con-controller-switch-lite-sensor-upgrade-mod-2-pack-blue-ginfullzedlabz-767068.jpg?v=1747453154"},{"product_id":"tmr-analog-joystick-module-for-nintendo-switch-joy-con-controller-switch-lite-sensor-upgrade-mod-2-pack-red-ginfull","title":"TMR analog joystick module for Nintendo Switch Joy-con controller \u0026 Switch Lite, sensor upgrade mod - 2 Pack red | Ginfull","description":"\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- TMR joystick module replacement for Switch Joy-con controllers.\u003cbr\u003e- Complete modular part including top rubber thumb stick cap.\u003cbr\u003e- Tunnel Magnetoresistance mechanism avoids the common drifting issues.\u003cbr\u003e- Ideal replacement for drifting, damaged or faulty joysticks.\u003cbr\u003e- Requires technical internal fitting - Tri-wing screwdriver required (not included)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFinally, say goodbye to controller drift with Ginfull TMR joystick replacements. Designed for gamers tired of unreliable controls, Ginfull TMR Sense joysticks use advanced magnetic sensor technology to tackle the common wear issues that plague traditional joystick modules.\u003c\/p\u003e\n\u003cp\u003eWhile the Ginfull TMR Sense joysticks maintain a familiar feel, they are built with a more accurate and durable internal mechanism. By utilizing magnetic technology instead of the usual carbon contacts, these joysticks offer superior precision and eliminate the risk of wear and premature failures that often cause drift in the original models.\u003c\/p\u003e\n\u003cp\u003eIf you’ve been battling drift or random joystick inputs, Ginfull TMR Sense replacements are the perfect solution to keep you playing and avoid costly repairs.\u003c\/p\u003e\n\u003cp\u003eCompatible with all original Nintendo Switch hardware, including Switch Joy-Con, Switch OLED Joy-Con, and Switch Lite models.\u003c\/p\u003e\n\u003cp\u003eEach pack includes one pair of Ginfull TMR joysticks. We recommend replacing both the left and right joysticks at the same time, as each module can be used on either side (there is no left or right-specific module).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe problem with traditional joycon analog modules:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you’ve ever had your game character move on their own or struggle to stay still, you’ve likely experienced “Joy-Con drift.” It’s one of the most frustrating issues for Switch players, and it’s not your fault. \u003c\/p\u003e\n\u003cp\u003eThe original Joy-Con joysticks use carbon contacts inside the controller that wear down over time with regular use. These contacts help detect the joystick’s position, but as they get rubbed by constant movement, they wear down, reducing the performance until it no longer functions properly and starts to move on its own, a problem commonly referrred to as drift.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow TMR modules work to solve drift:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTMR (Tunnel Magnetoresistance) modules provide a simple, yet highly effective solution to joystick drift.\u003c\/p\u003e\n\u003cp\u003eUnlike the original Joy-Con design, TMR sensors use magnetic fields to detect movement, the sensor doesn’t rely on physical contact, so there’s no friction or wear that can degrade performance.\u003c\/p\u003e\n\u003cp\u003eAs the joystick moves, a small magnet interacts with the TMR sensor, providing precise and accurate readings without the risk of drift. This contactless technology ensures smoother, longer-lasting performance, giving you a more reliable gaming experience free from the frustration of drifting controls.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cp\u003eThis complete modular analog TMR joystick is compatible with all regions of Nintendo Switch Joycon controller (Including those supplied with OLED consoles) or Switch Lite console.\u003c\/p\u003e\n\u003cp\u003eCompatible with the left or right controller, includes one pair of TMR modules in each pack, enough to upgrade one Joy Con controller set or one Switch Lite console.\u003c\/p\u003e\n\u003cp\u003eWhilst other gaming devices may use the same Joycon style modules we are only able to guarantee compatibility with official Nintendo controller hardware.\u003c\/p\u003e\n\u003cp\u003eRequires technical installation, the joycon controller of Switch Lite console just be opened, please note this will void any manufacturer warranty, opening your device could result in damage if done incorrectly, this is a DIY replacement part which is fitted at your own risk, please consult an expert if you are unsure.\u003c\/p\u003e\n\u003cp\u003eA tri-wing screwdriver tool required to install this part (not included)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003eCalibrating the replacement joystick after installation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou may need to recalibrate the controller after installing the new module, this can be done on any Nintendo Switch console, follow the following steps.\u003c\/p\u003e\n\u003cp\u003eFrom the HOME Menu select System Settings, then scroll down the menu on the left-hand side and select Controllers and Sensors.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eSelect Calibrate Control Sticks then fully tilt the control stick in any single direction for a few seconds on the controller you want to calibrate.\u003c\/p\u003e\n\u003cp\u003eFollow the on-screen prompts to verify the control stick functionality.\u003cbr\u003eIf the calibration is complete but is not immediately reflected when testing the control sticks, do the following:\u003c\/p\u003e\n\u003cp\u003e- Set the console to sleep mode, then press the POWER Button to \"wake it up\" again.\u003cbr\u003e- Reset the Joy-Con or Pro Controller by pressing the SYNC Button once, then press any other button to power it on again.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eBrowse the range\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"\/en-us\/collections\/switch-joy-con-replacement-parts\"\u003eJoy-Con replacement parts\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/en-us\/collections\/switch\"\u003eNintendo Switch parts and accessories\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ginfull","offers":[{"title":"Default Title","offer_id":47172688085244,"sku":"000896","price":16.29,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/tmr-analog-joystick-module-for-nintendo-switch-joy-con-controller-switch-lite-sensor-upgrade-mod-2-pack-red-ginfullzedlabz-881526.jpg?v=1747453154"},{"product_id":"tmr-analog-joystick-module-for-nintendo-switch-joy-con-controller-switch-lite-sensor-upgrade-mod-2-pack-black-k-silver","title":"TMR Analog Joystick Module for Nintendo Switch \u0026 Switch Lite Sensor Upgrade 2 Pack Black | K-Silver","description":"\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTMR analog joystick modules designed for Nintendo Switch \u0026amp; Switch Lite\u003c\/li\u003e\n\u003cli\u003eIncludes 2 x joystick modules\u003c\/li\u003e\n\u003cli\u003eSuitable for left or right joystick replacement\u003c\/li\u003e\n\u003cli\u003eIntended as a sensor upgrade replacement part\u003c\/li\u003e\n\u003cli\u003eCompatible with Joy-Con controllers and Switch Lite\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003eThis TMR analog joystick module set is designed for use with Nintendo Switch Joy-Con controllers and Switch Lite consoles. Supplied as a 2 pack, each module can be installed as either a left or right joystick replacement.\u003cbr\u003e\u003cbr\u003eTraditional joystick modules rely on physical contact within the sensor, which can wear over time. TMR (Tunnel Magnetoresistance) sensor technology is designed to detect movement using magnetic sensing rather than direct contact. This type of design is commonly used to reduce mechanical wear inside the module.\u003cbr\u003e\u003cbr\u003eFor users repairing worn or unresponsive analog sticks, this provides an alternative sensor type that is intended for long-term use and consistent input detection.\u003cbr\u003e\u003cbr\u003eThese modules are suitable for repair, maintenance, or upgrade use cases. Installation requires disassembly of the controller or console and the use of appropriate tools.\u003cbr\u003e\u003cbr\u003eThere are a number of small parts within Joy-Con controllers and Switch lite consoles, difficulty level of repair is medium\u003cbr\u003e\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eFurther Info\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: K-Silver\u003c\/li\u003e\n\u003cli\u003eQuantity: 2 joystick modules\u003c\/li\u003e\n\u003cli\u003eCompatibility: Nintendo Switch Joy-Con controllers \/ Nintendo Switch Lite\u003c\/li\u003e\n\u003cli\u003eNot compatible with Nintendo Switch 2\u003c\/li\u003e\n\u003cli\u003eInstallation: Internal component replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eInstallation Tips\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProfessional installation is recommended where possible\u003c\/li\u003e\n\u003cli\u003eRequires controller or console disassembly\u003c\/li\u003e\n\u003cli\u003eTri-wing and Phillips screwdrivers required (not included)\u003c\/li\u003e\n\u003cli\u003eTake care when handling ribbon cables and connectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Are these compatible with both left and right Joy-Con?\u003c\/strong\u003e\u003cbr\u003e\nA: Yes, each module can be installed in either the left or right controller.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ: Are these compatible with Switch Lite?\u003c\/strong\u003e\u003cbr\u003e\nA: Yes, they are suitable for use with Switch Lite.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ: Are tools included?\u003c\/strong\u003e\u003cbr\u003e\nA: No, required tools are not included.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ: Is this compatible with Switch 2?\u003c\/strong\u003e\u003cbr\u003e\nA: No, these are not compatible with Nintendo Switch 2.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProduct Safety\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli data-section-id=\"1dbwok7\" data-start=\"275\" data-end=\"315\"\u003eContains small parts, choking hazard\n\u003c\/li\u003e\n\u003cli data-section-id=\"a7m5u1\" data-start=\"316\" data-end=\"360\"\u003e\nNot a toy, keep out of reach of children\n\u003c\/li\u003e\n\u003cli data-section-id=\"251fau\" data-start=\"361\" data-end=\"411\"\u003e\nInstallation requires technical skill and care\u003c\/li\u003e\n\u003cli data-section-id=\"bs9wk2\" data-start=\"466\" data-end=\"506\"\u003e\nDisconnect power before installation\n\u003c\/li\u003e\n\u003cli data-section-id=\"u1bh7r\" data-start=\"507\" data-end=\"561\"\u003e\nKeep away from liquids, moisture, and heat sources\n\u003c\/li\u003e\n\u003cli data-section-id=\"53c6ob\" data-start=\"562\" data-end=\"618\"\u003e\nHandle internal components with care to avoid damage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a third-party product and is not manufactured, authorised, or endorsed by Nintendo.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eBrowse the range\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"\/en-us\/collections\/joy-con-controller-parts-mods\"\u003eJoy-Con parts and mods\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/en-us\/collections\/switch-joy-con-replacement-parts\"\u003eJoy-Con replacement parts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"K-Silver","offers":[{"title":"Default Title","offer_id":48899741384956,"sku":"000312","price":14.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/tmr-analog-joystick-module-for-nintendo-switch-switch-lite-sensor-upgrade-2-pack-black-k-silverk-silver-9651797.png?v=1774856674"},{"product_id":"tmr-analog-joystick-module-for-nintendo-switch-joy-con-controller-switch-lite-sensor-upgrade-mod-2-pack-white-k-silver","title":"TMR Analog Joystick Module for Nintendo Switch \u0026 Switch Lite Sensor Upgrade 2 Pack White | K-Silver","description":"\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTMR analog joystick modules designed for Nintendo Switch \u0026amp; Switch Lite\u003c\/li\u003e\n\u003cli\u003eIncludes 2 x joystick modules\u003c\/li\u003e\n\u003cli\u003eSuitable for left or right joystick replacement\u003c\/li\u003e\n\u003cli\u003eIntended as a sensor upgrade replacement part\u003c\/li\u003e\n\u003cli\u003eCompatible with Joy-Con controllers and Switch Lite\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003eThis TMR analog joystick module set is designed for use with Nintendo Switch Joy-Con controllers and Switch Lite consoles. Supplied as a 2 pack, each module can be installed as either a left or right joystick replacement.\u003cbr\u003e\u003cbr\u003eTraditional joystick modules rely on physical contact within the sensor, which can wear over time. TMR (Tunnel Magnetoresistance) sensor technology is designed to detect movement using magnetic sensing rather than direct contact. This type of design is commonly used to reduce mechanical wear inside the module.\u003cbr\u003e\u003cbr\u003eFor users repairing worn or unresponsive analog sticks, this provides an alternative sensor type that is intended for long-term use and consistent input detection.\u003cbr\u003e\u003cbr\u003eThese modules are suitable for repair, maintenance, or upgrade use cases. Installation requires disassembly of the controller or console and the use of appropriate tools.\u003cbr\u003e\u003cbr\u003eThere are a number of small parts within Joy-Con controllers and Switch lite consoles, difficulty level of repair is medium\u003cbr\u003e\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eFurther Info\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: K-Silver\u003c\/li\u003e\n\u003cli\u003eQuantity: 2 joystick modules\u003c\/li\u003e\n\u003cli\u003eCompatibility: Nintendo Switch Joy-Con controllers \/ Nintendo Switch Lite\u003c\/li\u003e\n\u003cli\u003eNot compatible with Nintendo Switch 2\u003c\/li\u003e\n\u003cli\u003eInstallation: Internal component replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eInstallation Tips\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProfessional installation is recommended where possible\u003c\/li\u003e\n\u003cli\u003eRequires controller or console disassembly\u003c\/li\u003e\n\u003cli\u003eTri-wing and Phillips screwdrivers required (not included)\u003c\/li\u003e\n\u003cli\u003eTake care when handling ribbon cables and connectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Are these compatible with both left and right Joy-Con?\u003c\/strong\u003e\u003cbr\u003e\nA: Yes, each module can be installed in either the left or right controller.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ: Are these compatible with Switch Lite?\u003c\/strong\u003e\u003cbr\u003e\nA: Yes, they are suitable for use with Switch Lite.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ: Are tools included?\u003c\/strong\u003e\u003cbr\u003e\nA: No, required tools are not included.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ: Is this compatible with Switch 2?\u003c\/strong\u003e\u003cbr\u003e\nA: No, these are not compatible with Nintendo Switch 2.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProduct Safety\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli data-section-id=\"1dbwok7\" data-start=\"275\" data-end=\"315\"\u003eContains small parts, choking hazard\n\u003c\/li\u003e\n\u003cli data-section-id=\"a7m5u1\" data-start=\"316\" data-end=\"360\"\u003e\nNot a toy, keep out of reach of children\n\u003c\/li\u003e\n\u003cli data-section-id=\"251fau\" data-start=\"361\" data-end=\"411\"\u003e\nInstallation requires technical skill and care\u003c\/li\u003e\n\u003cli data-section-id=\"bs9wk2\" data-start=\"466\" data-end=\"506\"\u003e\nDisconnect power before installation\n\u003c\/li\u003e\n\u003cli data-section-id=\"u1bh7r\" data-start=\"507\" data-end=\"561\"\u003e\nKeep away from liquids, moisture, and heat sources\n\u003c\/li\u003e\n\u003cli data-section-id=\"53c6ob\" data-start=\"562\" data-end=\"618\"\u003e\nHandle internal components with care to avoid damage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a third-party product and is not manufactured, authorised, or endorsed by Nintendo.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eBrowse the range\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"\/en-us\/collections\/joy-con-controller-parts-mods\"\u003eJoy-Con parts and mods\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/en-us\/collections\/switch-joy-con-replacement-parts\"\u003eJoy-Con replacement parts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"K-Silver","offers":[{"title":"Default Title","offer_id":48899758063868,"sku":"000311","price":14.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1810\/1427\/files\/tmr-analog-joystick-module-for-nintendo-switch-switch-lite-sensor-upgrade-2-pack-white-k-silverk-silver-2104395.png?v=1774856675"}],"url":"https:\/\/www.zedlabz.com\/en-us\/collections\/hall-effect-analog-sticks.oembed","provider":"ZedLabz","version":"1.0","type":"link"}