Features:- Replacement electrolytic capacitor set for PS1 Mitsumi power boards
- Contains the capacitors listed below
- Soldering required
Description:Replacement electrolytic capacitor set for Sony PS1 Mitsumi power boards.
Fits power boards 1-473-381-11 and 1-473-381-13 (Mitsumi SR670), and 1-468-218-21 and 1-468-218-22 (Mitsumi SR679).
Capacitors included:- C104: 120uF 200V (150uF on some revisions)
- C111: 47uF 35V
- C201: 1000uF 16V
- C202: 470uF 16V
- C203: 2200uF 10V
- C204: 1000uF 6.3V
Check your board's part number against the list above before ordering. Fitting means desoldering the old capacitors and soldering in the new ones the correct way round, and the console must be opened to fit them.
These are general electronic components supplied for repair use. This is an unofficial product which is not manufactured by, endorsed, sponsored or licensed by Sony Interactive Entertainment.
DIY part. This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our
fitting guides. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.
Safety information:
- Not a toy. Keep out of reach of children.
- Small parts – choking hazard.
- Soldering required – ventilate, beware hot iron.
- Capacitors are polarised – fit the correct way round.
- Switch off, unplug and remove any batteries before fitting.
- Fits listed models only – do not force.
- Fitting guides: zedlabz.com/blogs/guides
Manufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com
EU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com
