Features:- 470uf Capacitor set of 4 for replacing NEC Tokin
- Compatible with Sony PS3
- Choice of Tantalum or Aluminum capacitor type
- High quality Panasonic branded low ESR caps
- Require skilled soldering to install.
Description:Solve Yellow light of death issues on your PS3 console by replacing faulty NEC token with 4 low profile and low ESR capacitors.
When it comes to a YLOD fault, lots of research in the gaming community points to the NEC Token capacitors failing, and the solution to this is to replace a NEC Cap with alternative low ESR 470uf caps, these need to be of a certain quality and profile to fit in place of the NEC Token.
Four of these 470uf capacitors are needed to replace a single NEC token, a PS3 can have a different number of Token, so you please order according to the number of token you will be replacing, or example if you are replacing 4 token, then please order a quantity of 4, you will receive 16 caps.
We offer two types of capacitor kit, one has an even lower ESR which is technically preferable, but either type are suitable, please select the ones you require from the drop down box.
1) Low ESR Panasonic tantalum which are the most commonly used capacitors for this type of repair.
2) Even lower ESR Panasonic Aluminum polymer - It is preferable to use the lowest ESR when replacing the NEC Token, so we provide these as an option.
This repair requires advanced repair and soldering skills, recommended for trained electronics professionals only.
DIY part. This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our
fitting guides. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.
Safety information:
- Not a toy. Keep out of reach of children.
- Mains power unit inside – unplug before work; never open it.
- Small parts – choking hazard.
- Soldering required – ventilate, beware hot iron.
- Switch off, unplug and remove any batteries before fitting.
- Fit capacitors the right way round – reversed parts can burst.
- Fits listed models only – do not force.
- Fitting guides: zedlabz.com/blogs/guides
- Follow the manufacturer's instructions.
Brand / manufacturer: Panasonic · Seller: Assecure Ltd (ZedLabz), Maldon CM9 8LR, UK · support@zedlabz.com
EU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com
