Features:

- Game Boy Advance SP RGB LED board mod from Funnyplaying.
- Supports several colour options with all buttons the same colour.
- RGB Pulsing mode - The buttons cycle through the colours fading in and out.
- Low battery detection.
- Requires internal soldering of up to 8 solder points.

Description:

Give your Advance SP with LED lit buttons, which supports several colour settings, led off mode, pulsing mode and low battery warning.

Couple this board with semi transparent or transparent buttons and pads for the best results.

Soldering of up to 8 solder points are needed to complete the installation, difficulty medium.

The board also offers an alternative wiring for IPS kits, the start select can be wired from the IPS ribbon to the top left of the LED board for an easier and neater install.

Supports low battery detection, leds turn red. 

Hold A + B for three seconds to change modes 
Hold start plus A or B to change LED brightness
Hold select plus A or B to change the LED colour

To change a single LED Hold select plus L plus A or B

Use A+B for three seconds to exit the programming mode.

Supports the following modes:

LED off mode.
Fixed colour mode.
RGB colour pulsing mode.

Requires internal fitting - Console must be opened to install, soldering is required.