Features:- Compatible left and right replacement trigger switch buttons.
- DIY mod upgrade provides clicky shoulder triggers.
- Improves button responsiveness and feel.
- Technical soldering required.
- Console disassembly required to install part.
Description:Upgrade the feel of your L & R buttons to a more modern and reassuring click with these tactile switches compatible with Game Boy Advance.
The original buttons have a soft feel when pressed, changing these out to tactile buttons introduces a reassuring light click and reduction in failed inputs.
These have a shorter actuator than the original, but due to the solid plunger and button type the travel needed to press the button is almost the same as the original if not slightly shorter travel.This mod commonly referred to as a clicky triggers upgrade requires some DIY modification of the existing buttons to install. The original soft buttons must be desoldered and removed from the support brackets. The new tactile switches then need to be soldered into place and two of the legs trimmed off with cutters.
You should retain the back metal half of the old original switches, there are 4 small plastic posts which feed into the metal frame, these can be trimmed off to make it easier to seperarte the switch from the metal back part. It is advisable to use a small amount of glue or double sided tape to hold the new button against the metal frame of the old button.
Compatible replacement left and right trigger button switch set for Nintendo Game Boy Advance.
Console disassembly and soldering skills are required to install these parts., please consult an expert technician if unsure about installation.
DIY part. This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our
fitting guides. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.
Safety information:
- Not a toy. Keep out of reach of children.
- Small parts – choking hazard.
- Soldering required – ventilate, beware hot iron.
- Switch off, unplug and remove any batteries before fitting.
- Fits listed models only – do not force.
- Fitting guides: zedlabz.com/blogs/guides
- Follow the manufacturer's instructions.
Brand / manufacturer: Alps · Importer / seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com
EU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com
