Pulled product - May have minor marks or scratches - In full working order.
Features:- Replacement OEM mainboard for Nintendo Switch dock.
- Features 1 x HDMI, 1 x USB 3.0 & 2 x USB 3.0 ports.
- Used within the dock to connect your console to your TV & charge it.
- Requires technical internal fitting - Tri-wing screwdriver required (not included).
- Secondary USB C charging board PCB for console docking is not included.
Description:A replacement mainboard PCB (motherboard) for the Nintendo Switch Docking station.
This PCB connects the console to a TV, charges the console and allows other accessories to connect with the console such as a wired controller.
The mainboard is held inside the outer plastics of the dock by a couple of plastic clips and is easy to remove and replace. To access the insides of the dock you will need a tri-wing security screwdriver to remove the docks casing screws, a pair or tweezers to spudger is also recommended to help release the ribbon cable and connector on the opposite side.
A replacement board may be needed to repair one with damaged USB ports or faulty HDMI issues.
There may be a number of possible causes for dock issues and therefore technical assistance should be obtained from Nintendo or a qualified technician before concluding that the mainboard does need replacing.
Another use for this mainboard is in the building of a second docking station using DIY smaller docking station housings (available separately), this is ideal for creating a portable dock for travelling.
Mainboard PCB only, no other dock parts are included, a tri-wing screwdriver is required to install this part (not included).
DIY part. This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our fitting guides. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.
Safety information:
- Not a toy.
- Switch off, unplug and remove any batteries before fitting.
- Fits listed models only – do not force.
- Fitting guides: zedlabz.com/blogs/guides
Manufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · info@zedlabz.com
EU responsible person: Eucomply OÜ · Pärnu mnt 139b-14, 11317 Tallinn, Estonia · hello@eucompliancepartner.com
