Replacement Ribbon for the Virtual Boy.
Due to the aging of the adhesive, it can happen with the Virtual Boy that the display is no longer shown or that lines are missing.
This part requires detailed soldering of many pins, experience is needed to avoid bridging, we recommend getting it professionally soldered if you are not experienced.
Installing this replacement flex will permanently fix the problem.
It is recommended to replace both ribbons.
Each pack contains one ribbon, therefore in order to replace both ribbons please order a quantity of two.
The installation instructions can be found here: https://consoles4you.ch/guides/vbribbon.html
DIY part. This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our
fitting guides. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.
Safety information:
- Not a toy.
- Soldering required – ventilate, beware hot iron.
- Switch off, unplug and remove any batteries before fitting.
- Fits listed models only – do not force.
- Fitting guides: zedlabz.com/blogs/guides
- Follow the manufacturer's instructions.
Brand / manufacturer: Retroverse · Importer / seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com
EU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com
