Features: - 3S-Wick
- Spirig desolder wick for easy desoldering
- Size AA (Small)
- 50cm of desoldering braid
Description:Spirig desolder wick, 50cm of desoldering braid, size AA
There are 4 types of desoldering problems: 00 (Fine), AA (Small), AB (Medium), BB (Large), Please check compatibility before purchasing.
To use: Press the wick end with a sufficiently hot and sufficiently thermal mass sized solder tip on desolder area. The cold wick end might cool down the hot tip considerably, especially if it is a low mass tip, and the solder transfer into wick gets slow, sticky and unsatisfactory. Change to a thermal higher mass tip, preferably with a chisel sized end. Simultaneously remove solder filled wick end and iron tip from joint. Cut off saturated wick end for the next desolder operation.
DIY part. This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our
fitting guides. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.
Safety information:
- Not a toy.
- Soldering required – ventilate, beware hot iron.
- Fitting guides: zedlabz.com/blogs/guides
Manufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com
EU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com
