Features:
- Replacement Slot 1 game card reader for DSi and DSi XL
- Pulled part, previously used and removed from console
- Suitable for fixing consoles not reading game cartridges
- Requires detailed soldering or hot air rework
- Medium to high difficulty level repair
Description:
Restore game cartridge functionality with this replacement Slot 1 game card reader for Nintendo DSi and DSi XL consoles. This part is commonly used when a console no longer detects cartridges or has intermittent reading issues.
This is a pulled component, meaning it has been previously used and removed from a working console. It is intended as a replacement part for repair purposes where the original slot has become worn, damaged or faulty.
Installation requires careful removal of the existing socket and fitting of the replacement. This type of repair is more complex and suited to users with experience in electronics repair.
Further info:
This Slot 1 connector is responsible for reading game cartridges inserted into the console. Faults can occur due to wear, bent / broken pins or damage to the connector over time.
Replacement involves desoldering the original socket from the motherboard and installing the new one. Due to the number of pins and mounting points, this is considered a detailed repair.
A hot air rework station or precise soldering setup is typically required. Compatibility is for Nintendo DSi and DSi XL consoles.
Installation tips:
- Use a hot air rework station for safer removal of the original socket
- Apply flux to assist with clean soldering and removal
- Align all pins carefully before soldering the replacement
- Inspect all joints after installation before reassembly
FAQ:
Q: Is this part new or used?
A: This is a pulled part, previously used and removed from a working console.
Q: What issue does this fix?
A: It is used to repair consoles that do not read game cartridges or have intermittent connection issues.
Q: Is this an easy repair?
A: No, this is a medium to high difficulty repair and requires experience with soldering or hot air rework.
Q: What tools are required?
A: A hot air rework station or detailed soldering setup is typically required for installation.
This is a third party product and is not manufactured, sponsored, endorsed or licensed by Nintendo.
DIY part. This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our fitting guides. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.
Safety information:
- Not a toy. Keep out of reach of children.
- Small parts – choking hazard.
- Soldering required – ventilate, beware hot iron.
- Switch off, unplug and remove any batteries before fitting.
- Fits listed models only – do not force.
- Fitting guides: zedlabz.com/blogs/guides
Manufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · info@zedlabz.com
EU responsible person: Eucomply OÜ · Pärnu mnt 139b-14, 11317 Tallinn, Estonia · hello@eucompliancepartner.com
