Features:- Replacement electrolytic capacitor set for the SNES Jr mainboard (SNN-CPU-01)
- Contains the capacitors listed below
- Soldering required
Description:Replacement electrolytic capacitor set for the SNES Jr (SNES Mini) SNN-CPU-01 logic board.
Fits the SNN-CPU-01 mainboard used in the SNES Jr, also known as the SNES Mini.
Capacitors included:- C9: 2.2uF 50V
- C14: 33uF 25V
- C15: 47uF 16V
- C16: 33uF 25V
- C17: 33uF 25V
- C58: 10uF 16V
- C59: 10uF 16V
- C60: 220uF 6.3V
Also listed:- 1000uF 25V - found in Super Famicom hardware
- 470uF 6.3V - to add across the ground / output terminals of the voltage regulator
Check your board's part number against the list above before ordering. Fitting means desoldering the old capacitors and soldering in the new ones the correct way round, and the console must be opened to fit them.
These are general electronic components supplied for repair use. This is an unofficial product which is not manufactured by, endorsed, sponsored or licensed by Nintendo.
DIY part. This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our
fitting guides. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.
Safety information:
- Not a toy. Keep out of reach of children.
- Small parts – choking hazard.
- Soldering required – ventilate, beware hot iron.
- Capacitors are polarised – fit the correct way round.
- Switch off, unplug and remove any batteries before fitting.
- Fits listed models only – do not force.
- Fitting guides: zedlabz.com/blogs/guides
Manufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com
EU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com
