Features: - Hookup wire kit ideal for modding projects.
- Two 50mm length pieces of heatshrink tubing.
- Two 50MM length pieces of Kapton tape
- Five 600MM length hookwire in assorted colours.
- 28AWG wire thickness , approximately 0.8mm thickness (stripped)
Description: Grab this hookup kit with all the essentials for any gaming console modding project.
This kit is the ideal set of wires and essentials for installing a Raspberry Pico (Picoboot) inside a GameCube or any number of modding projects.
Included are 5 600mm length 28AWG hookup wires in 5 colours, ideal for colour coding and keeping track of your wire routing.
Also included is two 50mm length pieces of heatshrink which can be cut down into smaller pieces as needed, great for keeping wires neat, covering exposed wire or protecting wire from sharp areas.
Two 50mm length pieces of kaptop tape are helpful for insulating solder points or PCB boards as required.
If repairing or modding of a games console usually requires the disassembling of the console and is a DIY undertaking, it will void any warranty and is done at owners risk.
DIY part. This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our
fitting guides. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.
Safety information:
- Not a toy. Keep out of reach of children.
- Small parts – choking hazard.
- Soldering required – ventilate, beware hot iron.
- Fitting guides: zedlabz.com/blogs/guides
Manufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com
EU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com
