Features:- Mount bracket for Raspberry Pi Pico microcontroller board including W version
- Used in mount the Pico in the GameCube next to the cooling fan.
- Friction fit with option to install M2 x 5MM self tapping screws.
- May support other 2040 based microcontroller chip boards
- Accepts board dimensions 21mm width by 1mm depth.
- Includes 3D printed in black ABS & 2 M2 x 5mm screws.
Description: If your wondering where to locate your Pico and how to mount it inside your GameCube then this 3D printed mount bracket is for you.
You can use this stand with both the standard Pico and the wireless Pico (W version).
Designed and printed in house, this bracket has gone through over 15 iterations to come to this final design tested by the team here at ZedLabz.
The mount installs next to the cooling fan inside the GameCube and utilities an original chassis screw for the installation.
Simply remove one original Philips cross screw, place the mount into position and refit the screw.
The Pico board slides into the top of the mount with the friction fit, with the option to install two M2 x 5MM self tapping screws if you wish (included).
This mount is available on Thingiverse to print at home if you own a 3D printer, you can find it here:
https://www.thingiverse.com/thing:5427152
Thanks goes to Webhdx for creating this fantastic Pico based project for the GameCube, please support the original creator by donating to his page on GitHub.
Full details and official wiring instructions are available on GitHub here: https://github.com/webhdx/PicoBoot
DIY part. This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our
fitting guides. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.
Safety information:
- Not a toy. Keep out of reach of children.
- Small parts – choking hazard.
- Switch off, unplug and remove any batteries before fitting.
- Fits listed models only – do not force.
- Fitting guides: zedlabz.com/blogs/guides
Manufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com
EU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com
