Features:- 330 ohm resistor used to mod a DS Lite to operate with only the lower screen.
- Solder between LEDA2 and LEDC2 pads on the motherboard to create a Game Boy Macro.
- Includes two 330 ohm SMD resistors size 0805.
- Panasonic brand 0.5W thick film anti surge.
- Requires good soldering skills, small part.
Description:Convert a DS Lite console to a Game Boy Macro (GBM) with this resistor to mod the motherboard to run without a top screen.
To install this part you should ideally use flux and a fine tip soldering iron (not included), and add solder to the pads LEDA2 and LEDC2 and then install the small 0805 resistor with tweezers to hold it in place.
Panasonic branded resistors from an official distributor, size 0805, value 330 ohms 0.5watts.
Requires some technical fitting to install including soldering, the 0805 resistors are small and require experience in soldering.
DIY part. This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our
fitting guides. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.
Safety information:
- Not a toy. Keep out of reach of children.
- Small parts – choking hazard.
- Soldering required – ventilate, beware hot iron.
- Switch off, unplug and remove any batteries before fitting.
- Fitting guides: zedlabz.com/blogs/guides
Manufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com
EU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com
