Soldering supplies, the dedicated catalog for retro console mod soldering.
Browse soldering supplies
- Solder wire. SolderKing solder, both standard and Sc100e variants 0.38mm, 250g rolls and 2m / 50cm options
- Flux. ChipQuik NC191 no-clean, SolderKing flux pen, SolderKing rework gel
- Desoldering. Spirig desolder wick (size AA, 1.5m and 50cm)
- Beginner kits. ZedLabz beginner essentials kit (solder, wick, hookup wire, copper tape, Kapton)
- Tool kits
- Consumables
Most retro mods that go beyond drop-in IPS need at least basic soldering, audio amps, USB-C charge boards, capacitor refreshes and stick module replacements all live here. ZedLabz stocks SolderKing 0.38mm solder, Sc100e wire, ChipQuik NC191 no-clean flux, SolderKing flux pens and rework gel, Spirig desolder wick and a beginner essentials kit that bundles the basics.
Quick picks for any modder's bench
- If you're new to soldering: the ZedLabz beginner essentials kit (solder, solder wick, hookup wire, bare copper wire, Kapton tape, copper tape) plus a temperature-controlled iron, the Miniware TS101 is a popular starting iron.
- The everyday refill: a 250g roll of SolderKing solder 0.38mm, a ChipQuik NC191 flux tube and a fresh roll of Spirig desolder wick. Covers most standard mod work.
- The fine-work bench: SolderKing 0.38mm fine wire, ChipQuik NC191 no-clean flux for surface-mount, SolderKing rework gel for difficult joints, Sc100e wire.
Solder selection notes
- SolderKing solder is a common modder choice for retro work, flows at lower temperatures, gives shiny inspectable joints. UK-made.
- Sc100e is also stocked as an alternative solder option.
- Spirig desolder wick in size AA is the standard width for board-level rework, fine enough for SOIC pins, wide enough for through-hole.
- Flux choice: ChipQuik NC191 is no-clean (no residue rinse needed); SolderKing's flux pen suits touch-up work; SolderKing rework gel is for difficult removal jobs.
Worldwide delivery with tracking on every order. The Miniware TS101 is a popular starting iron for retro mod work, see our tool kits collection for the full range and bundles.
Related collections
- Tool kits, irons, screwdrivers, pry tools
- Consumables. Kapton, hookup wire
- General electronic components
Soldering Supplies. FAQs
What's no-clean flux for?
No-clean flux (like ChipQuik NC191) leaves residue that's electrically inactive at room temperature, so you don't have to clean it off the board after soldering. Useful for fine-pitch work where rinsing is awkward. Some modders still rinse for cosmetic reasons; functionally, residue is benign.
Do I need both desolder wick AND a desoldering pump?
For most retro mods, wick is sufficient. A pump is faster on through-hole desoldering (older console headers, cartridge pins). Buy wick first; add a pump if you find yourself doing a lot of through-hole rework. Our tool kits collection stocks both.
What soldering iron should I start with?
A temperature-controlled iron with a fine tip, the Miniware TS101 is a popular starting iron in the retro modding community. Avoid uncontrolled "fire stick" irons; the temperature swings damage solder joints and components. See our tool kits collection for the full range.
