Modding and repair tool kits, the parts catalog for opening, soldering and finishing console mods.
Browse modding tools by job
- Console-opening screwdrivers. Gamebit 3.8mm and 4.5mm security bits, tri-wing Y-bit, T6 / T8 Torx for Xbox
- Phillips and JIS. JIS standard Phillips screwdriver sets for console internals
- Pry tools, plastic spudgers in 3-packs for shells and ribbon connectors
- Soldering supplies, solder, flux, wick, beginner kits
- Consumables. Kapton tape, hookup wire, dropper bottles, fiber glass scratch pencils
Most retro mods need three categories of tool: console-opening drivers (Gamebit, tri-wing, T6 / T8), shell-and-ribbon pry tools, and soldering supplies. ZedLabz stocks the security screwdrivers needed for NES, SNES, N64, GameCube, Game Boy and Master System / Mega Drive shells, plus JIS Phillips sets, plastic spudgers, ESD tweezers and beginner soldering essentials kits.
Quick picks for any modder
- If you've never opened a retro console: the ZedLabz 3.8mm and 4.5mm Gamebit security screwdriver, the single bit needed for NES, SNES, N64, GameCube, Game Boy, Master System and Mega Drive cartridges and shells.
- The everyday kit: Gamebit driver, tri-wing Y-bit, JIS Phillips set, plastic spudgers, ESD tweezers, fiber glass scratch pencil and an air dust blower for screen lens installs.
- The full beginner kit: the ZedLabz beginner essentials kit, solder, solder wick, hookup wire, bare copper wire, Kapton and copper tape, alongside a temperature-controlled iron from the soldering range.
Tool ladder by mod
- Shell swaps and screen lens replacement: tri-wing Y-bit, Phillips PH00, plastic spudger, double-sided adhesive tape. No soldering.
- Cartridge / console security screws: Gamebit 3.8mm (Game Boy / SNES carts) and 4.5mm (cartridges and console shells across NES / SNES / N64 / GameCube).
- Xbox controllers: T6 / T8 Torx security screwdriver set.
- Soldering mods: temperature-controlled iron, solder, flux, desoldering wick or pump. The Miniware TS101 is a popular starting iron, see our soldering supplies collection.
- Cleaning and finishing: ESD-safe PCB brush, fiber glass scratch pencil for derusting / deburring, air dust blower for installing screen lenses without trapped dust.
Worldwide delivery with tracking on every order.
Related collections
- Soldering supplies
- Consumables, tape, wire, dropper bottles
- General electronic components
Modding Tool Kits. FAQs
Which screwdriver opens a Game Boy?
A tri-wing Y-bit opens the outer shell on Game Boy DMG, GBC, GBA and GBA SP. A Phillips PH00 handles internal screws on most boards. The Gamebit 3.8mm bit opens Game Boy cartridges; 4.5mm covers most console shells across NES, SNES, N64 and GameCube.
JIS or Phillips for Japanese consoles?
Most Japanese consoles (Sony, Nintendo, Sega) use JIS-spec cross-head screws rather than Phillips. JIS-shaped tips engage these screws cleanly without camming out and stripping the head. A standard Phillips will work in a pinch but is more likely to chew up screws on tight or thread-locked fasteners.
What soldering iron should I start with?
A temperature-controlled iron with a fine tip is the right choice for retro mod work. The Miniware TS101 is a popular starting point, fine-tip, USB-PD or DC powered, well-supported in the modder community. Browse our soldering supplies collection for our full range and consumables.
Are plastic spudgers really necessary?
For consoles with clipped or glued shells, yes, metal pry tools scratch internal plastic and risk shorting out boards. ZedLabz stocks 3-packs of plastic prying spudgers shaped for ribbon connectors and shell seams.
