Features:
- Clicky trigger Ribbon flex cable mod for Nintendo Switch Pro controllers.
- Replaces the L, R, ZL & ZR button flex.
- Reduces button travel my more than 50%
- Tactile buttons provide a reassuring clicking sound.
- Requires internal fitting.
Description:
Replace the shoulder & trigger button flex cable on a Switch Pro controller to this tactile button ribbon replacement. This mod is often referred to as a clicky trigger mod due to tactile buttons having a click when pressed.
The travel of the L R ZL ZR buttons is required by over 50%, which is particularly useful for shooting games where speed is required.
Included in this kit is a ribbon flex and plugs for the bottoms of the buttons. The plugs fit into the hole under the buttons to shorten the distance between the trigger and tactile switch and provide a flat bottom for good contact with the switches.
The controller must be disassembled to install this part, a reasonable degree of skill / experience with electronics is required to handle the small parts.
No soldering or cutting is needed, the ribbon cable attaches with the supplied adhesive and plugs in, the trigger plugs push into the buttons,
Care should be taken when separating the two halves of the controller as a ribbon cable joints the main board to a daughter board, this ribbon is commonly damaged due to accidental damage during opening, replacements are available in store.
Tools including screwdrivers and tweezers are included with this kit. A spare set of screws are also included just in case a screw becomes lost.
DIY part. This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our
fitting guides. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.
Safety information:
- Not a toy. Keep out of reach of children.
- Small parts – choking hazard.
- Sharp points or edges – handle and store with care.
- Switch off, unplug and remove any batteries before fitting.
- Fits listed models only – do not force.
- Fitting guides: zedlabz.com/blogs/guides
- Follow the manufacturer's instructions.
Brand / manufacturer: eXtremeRate · Importer / seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com
EU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com
