Features:- Spring loaded solder sucker tool.
- Light weight & simple to operate.
- Helps to remove excess solder
- Aluminum & plastic construction
- 200mm length
Description:Remove excess or unwanted solder solder during repairs and part removal with this manual vacuum solder desoldering pump.
The pump is string loaded to create a small vacuum capable of sucking away liquid solder.
To use the desoldering pump you first press down the spring loaded mechanism so that it is primed, then using a soldering iron you heat the solder to be removed, once the solder is molten liquid you place the nozzle of the pump very close to the solder and press in the button, the solder is then sucked away and where it instantly cools back to a solid solder.
Soldering iron not included.
DIY part. This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our
fitting guides. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.
Safety information:
- Not a toy.
- Soldering required – ventilate, beware hot iron.
- Fitting guides: zedlabz.com/blogs/guides
Manufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com
EU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com
