Features:- YLOD NEC Tokin repair PCB designed by RIP-Felix
- Blank PCB for easier install of Tantalum caps in place of NEC Token
- Used for repairing PS3 YLOD type errors from faulty NEC Token
- ENIG 0.8mm thickness - Accepts 3 7343 tantalum or aluminum caps
- Requires advanced soldering
Description:NOTE: Removal of NEC Token caps and repairing YLOD issues is an advanced repair, requiring detailed soldering and electronics experience, you should only attempt to use this product if you are a qualified electronics engineer or extremely competent in soldering work.
This is a PCB to assist in the replacement of the NEC/TOKIN bulk filter capacitors on some model PlayStation 3 consoles created by RIP-Felix
Note this is the blank PCB but we also sell this already populated with the caps on its respective page in the store.It is designed mount three 7343 Tantalum or Aluminum Polymer decoupling capacitors in place of a NEC Tokin, it also allows the addition of up to six 0805 Multi Layered Ceramic Capacitors (MLCC) in parallel.
Each PCB combined with the three 7343 tantalum will replace one NEC Token cap.
The addition six ceramic capacitors are optional and noted by RIP-Felix as probably being overkill, primarily this PCB is to make it easier to install 3 470uf tantalum or aluminum caps into a PS3 to replace faulty NEC Token.
You must buy 2mm height capacitors or shorter. This ensures it'll fit underneath the RF shield when you reassemble the console.
The 3 larger cap locations on the PCB are for 7343 (7.3 x 4.3 x 1.9mm, LxWxH). You can use Panasomic Tantalum such as Part number: 2R5TPE470M7, this part is sold in our store.
You can use other types of capacitors that fit this footprint, however, they must be low ESR/ESL processor decoupling capacitors.
The PCB takes up 0.8mm of height, so caps need to be low profile (less than 2mm). Each one should be less than 9mΩ ESR, 4.5mΩ ideally.
Thanks goes to RIP-Felix for all of the research and also the design of the Tantalizer PCB.Suggested capacitors to install onto the PCB:3x 470uF 2.5v 7mΩ Panasonic 2R5TPE470M7 TaPol caps.
Optional ceramic caps:
1x 47uF 10v X5R 0805 MLCC
1x 22uF 10v X5R 0805 MLCC
1x 10uF 10v X5R 0805 MLCC
1x 4.7uF 10v X5R 0805 MLCC
1x 2.2uF 10v X5R 0805 MLCC
1x 1uF 10v X5R 0805 MLCC
DIY part. This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our
fitting guides. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.
Safety information:
- Not a toy. Keep out of reach of children.
- Mains power unit inside – unplug before work; never open it.
- Small parts – choking hazard.
- Soldering required – ventilate, beware hot iron.
- Switch off, unplug and remove any batteries before fitting.
- Fits listed models only – do not force.
- Fitting guides: zedlabz.com/blogs/guides
Manufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com
EU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com
