Features:- Custom designed internal charging board mod by Giltesa
- Compatible with Game Boy Advance SP
- Features a USB C connector supporting USB-A to USB-C type cables.
- Supports audio using a USB C 3.5mm adapters without DAC
- Requires internal soldering and a Li-po battery ( Battery not included)
Description:NOTE: This mod requires a USB C to USB C type cable, it will not support USB C to USB C as it does not have the resistors needed, adding the resistors would disable the audio support.
This mod allows you to charge the game boy advance SP battery fitted to the console and use the port for headphones using a USB C headphone adapter.
The soldering level for this mod is medium to difficult, it requires some experience in soldering, as the solder points are quite small, there are 6 points to solder to achieve the charging and audio.
Shell cutting is not required for this mod, a 3D printed spacer is used to fill the void felt from removing the original charging port.
To listen to audio through headphones etc, you will need a USB C to 3.5mm adapter or USB C headphones, this must be without any DAC, just a basic low cost adapter.
Installation guide / documentation can be found on the Giltesa site here:
https://giltesa.com/en/2021/06/08/game-boy-advance-sp-usb-c-and-audio-kit
Soldering is required to install this mod.
DIY part. This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our
fitting guides. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.
Safety information:
- Not a toy. Keep out of reach of children.
- Small parts – choking hazard.
- Lithium battery – use a suitable charger; stop use if swollen or damaged.
- Soldering required – ventilate, beware hot iron.
- Switch off, unplug and remove any batteries before fitting.
- Fits listed models only – do not force.
- Fitting guides: zedlabz.com/blogs/guides
- Follow the manufacturer's instructions.
Brand / manufacturer: Giltesa · Importer / seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com
EU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com
