Features:- Power on fix PCB for Game Boy Advance
- Helps to fix slow / no power on issues
- Drains excess voltage on the 5V line
- Requires soldering of 2 points
Description:
This simple mod helps to fix problems with a GBA not turning back on after being turned off and on again.
The resistor on the PCB drain any excess voltage on the 5V line, allowing the console to boot normally.
2 solder points are needed to install this tiny PCB onto the motherboard.
Compatible with all models of Nintendo Game Boy Advance
DIY part. This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our
fitting guides. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.
Safety information:
- Not a toy. Keep out of reach of children.
- Small parts – choking hazard.
- Soldering required – ventilate, beware hot iron.
- Switch off, unplug and remove any batteries before fitting.
- Fits listed models only – do not force.
- Fitting guides: zedlabz.com/blogs/guides
- Follow the manufacturer's instructions.
Brand / manufacturer: Helder Game Tech · Importer / seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · support@zedlabz.com
EU responsible person (for authorities only): FFB Estonia OÜ · Päevalille tn 6-15, Haabersti linnaosa, 13517 Tallinn, Harju maakond, Estonia · finance_estonia@fulfillment-box.com
