Tactile buttons mod for Nintendo Game Boy Color [GBC] clicky A B D-pad no wires | FroggoCustoms

Features:

- Clicky tactile button mod for Game Boy Color
- Includes Directional pad & A / B buttons
- Also includes Start and select buttons
- Requires soldering to install
- Compatible with Nintendo Game Boy Color

Description:

Give your Game Boy Color buttons a clicky tactile feel with this easy to install wire-free button board!

Wires (not included) may be required in cases where the Game Boy has damage to the button test points, traces, and/or vias. Recommended to use 30 gauge or higher Kynar hookup wire.

Kits now contain tactile start/select board, be careful when installing these, as select via is very close to tac switch.

Installation video: https://youtu.be/5cmaAvloclE

Installation guide:

1. Align board over button contacts, ensuring that the through-holes align with the test points on the board
2. Solder all points on the button board to the test points below. Best practice is to apply gentle pressure to either side of the pads while applying solder to ensure the board remains flat
3(A/B only). If you wish to retain DC jack functionality, run a wire from the GND pad on the board to and ground point on the GBC. Otherwise, bridge the pads at GND_ALT on the board.
4. Success!