Features:- Easy install flex Amp for Game Boy Advance SP.
- Compatible with original SP speaker.
- 1.5W output - Can drive a speaker of up to 2W.- Four solder points on ribbon mounts flex cable to the motherboard.
- This product does not replace the SP power cleaner, but is compatible with it.
Description:This easy install flex amp from Helder requires four solder points and will give your Game Boy Advance SP a significantly boosted the audio volume.
To install this part you should ideally use flux and a fine tip soldering iron (not included), and add solder to the mounting points on the mainboard and onto the ribbon flex pads, you can then place the flex into position and reflow the solder with your iron to secure into place.
The amp has been tested to work with the original speaker and speakers up to 2W.
Requires some technical fitting to install including soldering, the flex cable comes pre-populated, making installation much easier, no need to solder the tiny capacitors or other parts.
Please note this product does not replace the SP power cleaner, each are a separate product offering different solutions, they are compatible with each other and it is recommended to use both for the best results.
DIY part. This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our fitting guides. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.
Safety information:
- Not a toy. Keep out of reach of children.
- Small parts – choking hazard.
- Soldering required – ventilate, beware hot iron.
- Switch off, unplug and remove any batteries before fitting.
- Fits listed models only – do not force.
- Fitting guides: zedlabz.com/blogs/guides
- Follow the manufacturer's instructions.
Brand / manufacturer: Helder Game Tech · Importer / seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · info@zedlabz.com
EU responsible person: Eucomply OÜ · Pärnu mnt 139b-14, 11317 Tallinn, Estonia · hello@eucompliancepartner.com
