Features:- Ethernet IC replacement Marvell 88EC060-NNB2
- Found in Sony PS3 Super Slim & earlier PS4 consoles.
- SMD QNF type part - requires high level of soldering skills.
- Advanced equipment needed to fit such as a hot air soldering station.
- Requires internal fitting - Console must be opened to install.
Description:
This replacement ethernet controller IC model 88EC060-NNB2 is usually found in Sony PS3 super slim, and earlier PS4 1000/1100 models, we recommend you do a physical check and read the model number from the existing IC to confirm it will be the correct part.
An experienced engineer will need to diagnose which IC chip is faulty and perform micro level soldering to install it.
The IC ins a QNF type and lead-less, IC legs / pins are integrated into the underside of the IC, you will need the right type of equipemnt such as a hot air soldering station to install this part.
This is not something that can be installed by a beginner with little soldering experience.
DIY part. This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our fitting guides. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.
Safety information:
- Not a toy. Keep out of reach of children.
- Unplug from the mains and let capacitors discharge before work.
- Small parts – choking hazard.
- Soldering required – ventilate, beware hot iron.
- Switch off, unplug and remove any batteries before fitting.
- Fits listed models only – do not force.
- Fitting guides: zedlabz.com/blogs/guides
- Follow the manufacturer's instructions.
Brand / manufacturer: Marvell · Importer / seller: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · info@zedlabz.com
EU responsible person: Eucomply OÜ · Pärnu mnt 139b-14, 11317 Tallinn, Estonia · hello@eucompliancepartner.com