Features:- Replacement foam pad for conductive film membrane circuits in PS4 controllers.
- Foam rectangle creates pressure to hold the button circuit film against the mainboard contacts.
- Replacing the retaining sponge can resolve problems with buttons not responding.
- Pre-applied 3M adhesive for secure positioning.
- Dimensions: 17mm x 5mm x 2mm
Description:If one or more of your buttons have stopped responding then this can be caused by a faulty conductive film or the retaining foam block that presses the film contacts onto the contacts on the controller mainboard.
This part may resolve issues without needing to change the conductive film, by replacing the foam piece the pressure can be restored which can resolve dead buttons.
It comes with pre-applied adhesive for secure positioning of the part.
Requires internal fitting, controller must be opened to install.
DIY part. This is a DIY part for you to fit yourself. Fitting needs care and, where stated, soldering or other technical skills – see our fitting guides. We're not responsible for damage caused by incorrect fitting, or for an existing fault in your console. Replacing a part may not fix your fault, as faults can have more than one cause. This doesn't affect your statutory rights.
Safety information:
- Not a toy. Keep out of reach of children.
- Small parts – choking hazard.
- Switch off, unplug and remove any batteries before fitting.
- Fits listed models only – do not force.
- Fitting guides: zedlabz.com/blogs/guides
Manufacturer: Assecure Ltd (ZedLabz), The Outbuildings, Grove Farm Road, Maldon, Essex, CM9 8LR, UK · info@zedlabz.com
EU responsible person: Eucomply OÜ · Pärnu mnt 139b-14, 11317 Tallinn, Estonia · hello@eucompliancepartner.com
